================================================================== Windows 2000 DRIVER INSTALLATION ================================================================== This document briefly describes how to install ET32/P Series PCI Ethernet Adapter under Windows 2000 environment. ================================================================== Driver Installation ================================================================== To install the ET32/P, plug the adapter into the PC and make sure the cable is connected to it and an active hub. During startup the adapter is identified by Windows 2000 as "KTI ET32/P Series PCI Ethernet Adapter" and automitically loads the required driver. After the bootup sequence, the ET32/P should function correctly. ================================================================== Troubleshooting ================================================================== If the PC is still unable to connect to the network, check if the adapter is functioning correctly through the device manager. This can be done by checking the device status of the adapter by selecting the adapter, click on the Action menu and select Properties.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.