INSTALL.TXT Driver File Contents (ET32P-14.EXE)

        Driver Installation for SCO OpenServer (Release 5)
        ==================================================

   The following instructions are for loading KTI Networks' ET32/Px
   adapters with SCO OpenServer (Release 5).

   1. Start X Windows

     (1) Boot your machine with SCO OpenServer (Release 5) and login
         as root.

     (2) Start X Windows by typing "startx &". If your system can't run X
         Windows, you can run SCOADMIN instead to load and configure the
         driver, the procedure is similar.

   2. Install the software package on the floppy

     (1) Open "Software Manager" by double clicking its icon.

     (2) Go to "Software" --> "Install New".

     (3) It asks "What host do you want to install from ?", Select local
         machine.

     (4) A new window pops up to let you select media device, please
         insert the adapter's driver disk, then select "Floppy Disk
         Drive 0 (or 1)" depending on your system.

     (5) It displays "Installing: KTI ET32 PCI Adapter Driver
         (Version 2.0.0a). Do you want a FULL or PARTIAL installation",
         select "FULL".

     (6) After the software is installed, "KTI ET32 PCI Adapter Driver"
         should be listed with other installed software.

   3. Install the device driver

     (1) Open "System Administration" --> "Networks" -->"Network
         Configuration Manager".

     (2) Goto "Hardware" --> "Add new LAN adapter". SCO will detect and
         list KTI ET32 PCI adapter automatically. Highlight it and select
         "Continue".

   4. Install protocols

      After the driver is configured, SCO will let you add protocols to
      it one by one. If you want to access Novell server from SCO, both
      "SCO IPX/SPX" and "SCO Gateway for Netware" are required, also
      make sure the network number for "SCO IPX/SPX" matches the related
      configuration in your Novell server.

   5. Re-link the kernel

      When you exit from "Network Configuration Manager", you will be
      asked if you want to re-link the kernel now. Choose yes,  set the
      new kernel to boot by default, and rebuild the kernel environment.

   Note:

     (1) Each time when the system reboots, it displays one line for each
         ET32 PCI adapter similar to this:

       device      address         vector  dma     comment
       ...
       %ket        0xE800-0xe81F    10      -      KTI ET32PCI 00:40:f6:f8:80:d7
       ...

         If the comment is "NO KTI BOARD PRESENT", you need to check the
         adapter and driver again, make sure they are installed correctly.

     (2) If you have more than one ET32 PCI adapter installed in the
         system and you want to remove one, we suggest you remove all
         adapters first in "Network Configuration Manager", then reinstall
         again.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.60