INSTALL.TXT Driver File Contents (ET32P-14.EXE)

        Packet Driver Installation

   Copy the driver diskette, "ET32PKD.COM", into a directory. The packet
   driver can be loaded from the DOS prompt or from the AUTOEXEC.BAT file.

   The command line format for the packet driver is:

       ET32PKD [packet_int_no] [ID0-ID1-ID2-ID3-ID4-ID5]

                where packet_int_no is the software interrupt number, and
                in the range 0x60 through 0x80 (including 0x60 and 0x80).
                The default value is 0x60 (0x60 means 60h).
                The ID0-ID1, ..., ID5 are the 6 bytes' physical address,
                and valued 0x0-0xff.

                The physical address can be obtained by running the SETUP
                program. The SETUP program is also supplied in this
                adapter's driver diskette under \setup subdirectory.

       ET32PKD -U/-u packet_int_no

                the parameter 'U' or 'u' may unload this packet driver
                using this specific packet_int_no.

       ET32PKD ?
                show message about ET32PKD sysntax.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.77