INSTALL.TXT Driver File Contents (ET32P-14.EXE)

        NetWare 4.x Server Driver Installation

   Two sections are covered in this information as below:



   DRIVER          : ET32NW.LAN

   Parameter  Description          Valid Values and Notes
   PCIBOARD   PCI board number     1,2,3,4

   This parameter specifies a specific ET32/Px adapter when multiple
   ET32/Px adapters are installed in one system. If only one ET32/Px
   adapter is installed, it is not necessary to specify this option.
   The driver will search the adapter automatically.
   FRAME      Packet Frame type    Ethernet_802.2, Ethernet_II,
                                   Ethernet_802.3, Ethernet_SNAP

   If not specified, the driver uses Ethernet_802.2 as default.



      Netware 4.0x/4.1 supports loading LAN drivers via server INSTALL
      program interactively. This loading method needs a *.LDI file
      together with the driver file.

      The directory \NW4X of the driver diskette has been properly
      prepared with the server drivers *.LAN files and *.LDI files for
      the driver installation.

      Make sure the adapter has been installed in your server before you
      start the installation.

      Follow these procedures:

      (1) Execure the command under Netware console prompt:

              :load install <enter>

      (2) Select "LAN Driver Options" from the "Installation Options"

      (3) A list of LAN drivers is showed up.

      (4) Press <Ins> hot key to load a LAN driver not listed.

      (5) Press <F3> to enter a directory path for the unlisted
          LAN drivers.

      (6) Insert this adapter driver diskette into disk driver A:.

      (7) Enter the directory path as "A:\NW4X".

      (8) ET32NW driver is listed as below:

          ET32NW.LAN         KTI ET32/Px Series PCI Ethernet Adapter

      (9) Each selection in the rest procedures provides a "help"
          message window to support your installtion conveniently.

      (10) The major purpose of this installation is to help you to
           compose a command line of loading a specific LAN driver with
           proper parameters through a user-friendly way. All selections
           of the driver parameters have been provided sufficient help
           message. Please follow the on-screen instruction to complete
           your installtion.

   2. USE "LOAD ET32NW ..." COMMAND.

   You may load the server driver directly under Netware console
   prompt. However, make sure you have copied all drivers and the
   required NLM files from the driver diskette into your proper
   direcotry in the server before loading the driver.

   To load ET32NW.LAN driver, follow the commands as below:

        :load et32nw [parameter=value]

   The supported parameters are summarized as below:

              Valid values
   Parameter  (none) means parameter is not specified.
   ---------  -----------------------------------------
   PCIBOARD   1,2,3,4
              (none) -- auto search

   FRAME      Ethernet_802.2, Ethernet_802.3,
              Ethernet_SNAP, Ethernet_II
   ---------  -----------------------------------------
   Note : All parameter names and values are caps insensitive.


   * Single adapter using frame Ethernet_802.2

     (a) command:          load et32nw

   * Single adapter using frame ethernet_802.3

           load et32nw frame=ethernet_802.3

   * Single adapter supporting multiple frame types

           load et32nw pciboard=1 frame=ethernet_802.2 name=et32_802.2
           load et32nw pciboard=1 frame=ethernet_802.3 neme=et32_802.3
           bind IPX to et32_802.2 net=8022
           bind IPX to et32_802.3 net=8023

   * Multiple adapters, single frame type

     Two ET32/Px adapters respectively to support frame ethernet_802.3

           load et32nw pciboard=1 frame=ethernet_802.3 name=et32_1_802.3
           load et32nw pciboard=2 frame=ethernet_802.3 name=et32_2_802.3
           bind IPX to et32_1_802.3 net=18023
           bind IPX to et32_2_802.3 net=28023

   * Multiple adapters, multiple frame types

     Two ET32/Px adapters supporting frame ethernet_802.2 and ethernet_802.3

           load et32nw pciboard=1 frame=ethernet_802.3 name=et32_1_802.3
           load et32nw pciboard=1 frame=ethernet_802.2 name=et32_1_802.2
           load et32nw pciboard=2 frame=ethernet_802.3 name=et32_2_802.3
           load et32nw pciboard=2 frame=ethernet_802.2 name=et32_2_802.2
           bind IPX to et32_1_802.3 net=18023
           bind IPX to et32_1_802.2 net=18022
           bind IPX to et32_2_802.3 net=28023
           bind IPX to et32_2_802.2 net=28022

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.90