INSTALL.TXT Driver File Contents (ET32P-14.EXE)

        NetWare 3.12 Server Driver Installation
        =======================================

   Two sections are covered in this information as below:

        * DRIVER PARAMETER DEFINITION
        * DRIVER INSTALLATION

   DRIVER PARAMETER DEFINITION
   ===========================

   DRIVER          : ET32NW.LAN

   Parameter  Description          Valid Values and Notes
   -----------------------------------------------------------------------
   PCIBOARD   PCI board number     1,2,3,4

       This parameter specifies a specific ET32/Px adapter when multiple
       ET32/Px adapters are installed in one system. If only one ET32/Px
       adapter is installed, it is not necessary to specify this option.
       The driver will search the adapter automatically.
   -----------------------------------------------------------------------
   FRAME      Packet Frame type  Ethernet_802.2,Ethernet_II,Ethernet_802.3
                                 Ethernet_SNAP

       If not specified, the driver uses Ethernet_802.2 as default.


   DRIVER INSTALLATION
   ===================

   You may load the server driver directly under Netware console prompt.
   However, make sure you have copied all drivers and the required NLM
   files from the driver diskette into your proper direcotry in the server
   before loading the driver.

   To load ET32NW.LAN driver, follow the commands as below:

        :load et32nw [parameter=value]

   The supported parameters are summarized as below:

              Valid values
   Parameter  (none) means parameter is not specified.
   ---------  -----------------------------------------
   PCIBOARD   1,2,3,4
              (none) -- auto search

   FRAME      Ethernet_802.2, Ethernet_802.3,
              Ethernet_SNAP, Ethernet_II
   ----------------------------------------------------
   Note : All parameter names and values are caps insensitive.


   Examples:

   * Single adapter using frame Ethernet_802.2

     (a) command:          load et32nw

   * Single adapter using frame ethernet_802.3

        load et32nw frame=ethernet_802.3


   * Single adapter supporting multiple frame types

           load et32nw pciboard=1 frame=ethernet_802.2 name=et32_802.2
           load et32nw pciboard=1 frame=ethernet_802.3 neme=et32_802.3
           bind IPX to et32_802.2 net=8022
           bind IPX to et32_802.3 net=8023

   * Multiple adapters, single frame type

     Two ET32/Px adapters respectively to support frame ethernet_802.3

        load et32nw pciboard=1 frame=ethernet_802.3 name=et32_1_802.3
        load et32nw pciboard=2 frame=ethernet_802.3 name=et32_2_802.3
        bind IPX to et32_1_802.3 net=18023
        bind IPX to et32_2_802.3 net=28023

   * Multiple adapters, multiple frame types

     Two ET32/Px adapters supporting frame ethernet_802.2 and ethernet_802.3

           load et32nw pciboard=1 frame=ethernet_802.3 name=et32_1_802.3
           load et32nw pciboard=1 frame=ethernet_802.2 name=et32_1_802.2
           load et32nw pciboard=2 frame=ethernet_802.3 name=et32_2_802.3
           load et32nw pciboard=2 frame=ethernet_802.2 name=et32_2_802.2
           bind IPX to et32_1_802.3 net=18023
           bind IPX to et32_1_802.2 net=18022
           bind IPX to et32_2_802.3 net=28023
           bind IPX to et32_2_802.2 net=28022


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.91