Compaq A1000 All-In-One Printer Driver
for Microsoft Windows 2000
----------------------------------------------------------
Tips:
1) After you install the Compaq A1000 All-In-One software,
the Compaq A1000 All-In-One program group appears under
Start/Programs.
2) Many printing problems can be eliminated by setting
Virtual Memory Initial Size to at least 128 MB. You
should also set the Virtual Memory Maximum Size to
at least 256 MB.
Hint: Click Start/Settings/Control Panel; double-click
on System and go to the Performance tab; in the Virtual
Memory section, select the Change button; change the
Initial Size of the Paging File Size for Selected Drive;
change the Maximum Size of the Paging File Size for
Selected Drive; then press the Set button.
3) This driver was designed to work best with the Default Datatype
of LEMF. To select LEMF as the Print Processor Default Datatype:
Click Start/Settings/Printers; right-click Compaq A1000
printer icon, then click Properties.
Click the Print Processor button. Select the Compaq
Print Processor. Select LEMF as the Default Datatype.
Click off "Always spool RAW datatype". Click OK.
4) If DOS jobs fail to print:
More than one printer driver may be installed on a PC.
To correct the problem, attach all other printer drivers
to FILE: as follows:
1. Click Start/Settings/Printers.
2. Right-click on the printer and select Properties.
3. Go to the Ports tab and select FILE: from the list of ports.
4. Click on OK.
5. Repeat steps 2-4 for all printers except the Compaq A1000
All-In-One.
5) There are three different print quality modes in the driver
ranging from a "draft" mode to a 1200 DPI mode. The
differences between these modes are in the dots per inch
addressed, and the number of passes of the print head used
to apply ink to the print medium. The greater the number of
passes, the higher the print quality.
High Speed: This is a 600x300 DPI high-speed "draft"
mode. All printing is done with one pass.
Normal: This is a 600x600 DPI mode. It is the
default for the driver. Printing is done
in either one or two passes, depending on
the print media used.
High Quality: This is the 1200x1200 DPI mode. All printing
is done in four passes.
6) If you are unable to select 1200 Dots Per Inch (DPI) from
within applications, you may select 1200 DPI mode
from the driver.
To get 1200 DPI mode from the driver for all documents:
Click Start/Settings/Printers; right-click on the
Compaq A1000 printer icon; click Document Defaults;
select High Quality; then click OK.
To get 1200 DPI mode for a particular application:
From the application's file menu, select Print, then Properties,
Options, or Setup. Select High Quality; then click OK.
7) If you select RAW as the Print Processor Default Datatype, then
print jobs will not start printing until the last page is spooled.
8) Peer-To-Peer printing works if the Peer's Print Processor
Default Datatype is either RAW or LEMF.
9) Full graphic Freehand files might print fastest with the Default
Datatype of NT EMF. To select NT EMF as the Print Processor Default
Datatype:
Click Start/Settings/Printers; right-click Compaq A1000
printer icon, then click Properties.
Click the Print Processor button. Select the Compaq
Print Processor. Select NT EMF as the Default Datatype.
Click off "Always spool RAW datatype". Click OK.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.