CHIPSXP.INF Driver File Contents (6555x-6900_WinXP_v2.47.4.0.zip)

; ChipsXP.inf
;
; Installation inf for third party (OEM) graphics drivers
;

[Version]
Signature="$CHICAGO$"
Provider=%drvlib%
ClassGUID={4D36E968-E325-11CE-BFC1-08002BE10318}
Class=Display

[DestinationDirs]
DefaultDestDir   = 11
chips6x.Miniport  = 12  ; drivers
chips6x.Display   = 11  ; system32

;
; Driver information
;

[Manufacturer]
%Chips% = Chips.Mfg

[Chips.Mfg]
%Chips% 65548  = chips6x, PCI\VEN_102C&DEV_00DC
%Chips% 65550  = chips6x, PCI\VEN_102C&DEV_00E0
%Chips% 65554  = chips6x, PCI\VEN_102C&DEV_00E4
%Chips% 68554  = chips6x, PCI\VEN_102C&DEV_00F4
%Chips% 65555  = chips6x, PCI\VEN_102C&DEV_00E5
%Chips% 69000  = chips6x, PCI\VEN_102C&DEV_00C0
%Chips% 69030  = chips6x, PCI\VEN_102C&DEV_0C30
;
; General installation section
;

[chips6x]
CopyFiles=chips6x.Miniport, chips6x.Display

;
; File sections
;

[chips6x.Miniport]
ChipsXPm.sys

[chips6x.Display]
ChipsXPd.dll
chpsptrt.exe
cntntdsp.dll
cntntdsp.dat
chpstart.exe
chipsdan.hlp
chipsdeu.hlp
chipsdsp.hlp
chipsesp.hlp
chipsfin.hlp
chipsfra.hlp
chipsita.hlp
chipsjpn.hlp
chipsnld.hlp
chipsnon.hlp
chipsptb.hlp
enucpres.dll

;
; Software Installation
;

[chips6x.SoftwareSettings]
AddReg = chips6x_SoftwareDeviceSettings
AddReg = chips6x_Configuration                          ; mode/refresh config file section

[chips6x_SoftwareDeviceSettings]
HKR,, InstalledDisplayDrivers,     %REG_MULTI_SZ%, ChipsXPd
HKR,, BiosClaimSize,               %REG_DWORD%,    1
HKR,, ConfigFlags,                 %REG_DWORD%,    0
;
; To force the Asiliant driver to handle full screen DOS box
; set the VgaCompatible key to 1.  This should only be done
; when the Asiliant (C&T) device is the primary boot screen
;
; HKR,, VgaCompatible,               %REG_DWORD%,    1
HKR,, VgaCompatible,               %REG_DWORD%,    0


HKCR,"CLSID\%CLIDDSP%",,,"CHIPSDSP"
HKCR,"CLSID\%CLIDDSP%\InProcServer32",,,"cntntdsp.dll"
HKCR,"CLSID\%CLIDDSP%\InProcServer32","ThreadingModel",,"Apartment"

HKLM,"%CURRENT%\%DSPPSH%",,,"cntntdsp"
HKLM,"%CURRENT%\%DSPPSH%\ChipsDsp",,,"%CLIDDSP%"
HKLM,"%CURRENT%\Shell Extensions\Approved",,,"%CLIDDSP%"="CNTNTDSP"
HKLM,"%CURRENT%\Run","CHIPSStart",,"CHPSTART.EXE"

;
; To enable Portrait modes and rotation, un-comment the following
; line and re-install the driver.
;
; HKLM,"%CURRENT%\Run","CHIPSPtrt",,"CHPSPTRT.EXE"


;
; This section is used to place the mode/refresh configuration filename
; in the Registry.
;
[chips6x_Configuration]
HKLM,%DEFAULT_CUR_SET%,DefaultSettings.BitsPerPel,%REG_DWORD%,0x8
HKLM,%DEFAULT_CUR_SET%,DefaultSettings.VRefresh,%REG_DWORD%,0x3C
HKLM,%DEFAULT_CUR_SET%,DefaultSettings.XResolution,%REG_DWORD%,0x280
HKLM,%DEFAULT_CUR_SET%,DefaultSettings.YResolution,%REG_DWORD%,0x1E0

HKLM,%CHIPS_69030_ROOT%,DualPipeMode,%REG_DWORD%,0

HKLM,%CHIPS_69030_MODE0%,DisplayFlags,%REG_DWORD%,0x3
HKLM,%CHIPS_69030_MODE0%,TVFlags,%REG_DWORD%,0x1

HKLM,%CHIPS_69030_MODE1%,DisplayFlags,%REG_DWORD%,0x102
HKLM,%CHIPS_69030_MODE1%,TVFlags,%REG_DWORD%,0x1

HKLM,%CHIPS_69030_MODE2%,DisplayFlags,%REG_DWORD%,0x102
HKLM,%CHIPS_69030_MODE2%,TVFlags,%REG_DWORD%,0x1

;
; Service Installation
;

[chips6x.Services]
AddService = chips, 0x00000002, chips6x_Service_Inst, chips6x_EventLog_Inst

[chips6x_Service_Inst]
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 1                  ; SERVICE_SYSTEM_START
ErrorControl   = 0                  ; SERVICE_ERROR_IGNORE
LoadOrderGroup = Video
ServiceBinary  = %12%\ChipsXPm.sys

[chips6x_EventLog_Inst]
AddReg = chips6x_EventLog_AddReg

[chips6x_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\ChipsXPm.sys"
HKR,,TypesSupported,0x00010001,7

;
; Source file information
;

[SourceDisksNames.x86]
1 = %DiskId%,,,""

[SourceDisksFiles]
ChipsXPd.dll  = 1,,
ChipsXPm.sys   = 1,,
chpsptrt.exe  = 1,,
cntntdsp.dll  = 1,,
cntntdsp.dat  = 1,,
chipsdsp.ico  = 1,,
chipsico.cpq  = 1,,
chipsdat.cpq  = 1,,
chipsdan.hlp  = 1,,
chipsdeu.hlp  = 1,,
chipsdsp.hlp  = 1,,
chipsesp.hlp  = 1,,
chipsfin.hlp  = 1,,
chipsfra.hlp  = 1,,
chipsita.hlp  = 1,,
chipsjpn.hlp  = 1,,
chipsnld.hlp  = 1,,
chipsnon.hlp  = 1,,
chipsptb.hlp  = 1,,

[Strings]

;
; Non-Localizable Strings
;

REG_SZ         = 0x00000000
REG_MULTI_SZ   = 0x00010000
REG_EXPAND_SZ  = 0x00020000
REG_BINARY     = 0x00000001
REG_DWORD      = 0x00010001
SERVICEROOT    = System\CurrentControlSet\Services
DEFAULT_CUR_SET= "System\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\ChipsPrt\Device0"

;
; Localizable Strings
;

Chips = "Chips and Technologies (Asiliant)"

DiskId="CHIPS_DISK1"
drvlib="CHIPS"

CURRENT="SOFTWARE\Microsoft\Windows\CurrentVersion"
DSPPSH="Controls Folder\Display\shellex\PropertySheetHandlers"
CLIDDSP="{FB4D048C-2FD2-11CF-B892-02608C411917}"

CHIPS_69030_ROOT  = "SOFTWARE\Chips and Technologies\CHIPSCPL\Display1"
CHIPS_69030_MODE0 = "SOFTWARE\Chips and Technologies\CHIPSCPL\Display1\Mode0"
CHIPS_69030_MODE1 = "SOFTWARE\Chips and Technologies\CHIPSCPL\Display1\Mode1"
CHIPS_69030_MODE2 = "SOFTWARE\Chips and Technologies\CHIPSCPL\Display1\Mode2"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.64