NWLITE.TXT Driver File Contents (hawk.zip)

            CardBus Fast Ethernet Adapter Installation
                    for NetWare Lite Driver

    .Minimum Skill Level
    .Getting Started

    The ODI driver program allows you to run multiple protocol stacks
    and install up to two network adapters in a workstation. This ODI
    driver supports the Port, Node Address, Protocol and Frame options
    for creating your own NET.CFG file. For more information on these
    keywords, please refer to Novell's "NetWare ODI shell for DOS -
    NET.CFG options". This installation assumes that the PCMCIA drivers
    are working properly. Please consult \PCMCIA\README.TXT for
    help with PCMCIA Drivers. Getting Started will describe the
    installation instructions.

    .A PCMCIA compatible Laptop
    .Netware Lite network operating system
    .A CardBus Fast Ethernet PC Card
    .A knowledge of basic DOS commands and editing text files

  Minimum Skill Level
    .A knowledge of basic DOS commands
    .A knowledge of editing text files
    .A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
    .A knowledge of the network driver configuration being used
    .Please see Support Options if you are not comfortable will this
     skill level

  Getting Started
    1. Follow the normal installation procedure as described by NetWare Lite.
       When prompted for a network driver, simply choose "NOVELL NE2000".

    2. After completion of the installation procedure, modify the following
       lines in your STARTNET.BAT file from:

              IPXODI A
              IPXODI A

    3. Append the <PATH>\NET.CFG file to the NWLITE directory. This
       directory was created when you installed NetWare Lite. <PATH>
       is the directory where NET.CFG resides.

    4. Run STARTNET to access the Novell network.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.16