;
; *** This file has been generated by USBIO Installation Wizard. ***
;
; USBIO Setup Information file
; Copyright (c) Thesycon GmbH 1998-2000
;
; Note:
; Some section names (enclosed in []) are system-defined and should not be changed.
; Private section names start with an '_'. These can be changed.
;
; Refer to the Windows 2000 DDK documentation for more information on INF files.
;
; Revision: 2/27/2001, Franklin Electronic Publishers, Inc.
;
;******************************************************************************
; Version section
;------------------------------------------------------------------------------
[Version]
Signature="$CHICAGO$"
Provider=%S_Provider%
DriverVer=11/02/2000,1.41
; use a private device class that is defined by USBIO:
Class=FEP_DEVICES
ClassGUID={F587C22D-61BE-4a83-9362-3054ACADC372}
;******************************************************************************
; Class Install section (optional)
;------------------------------------------------------------------------------
; install class, Windows 98:
[ClassInstall]
AddReg=_AddReg_ClassInstall
; install class, Windows 2000:
[ClassInstall32]
AddReg=_AddReg_ClassInstall
; registry entries required for class
[_AddReg_ClassInstall]
HKR,,,,"%S_DeviceClassDisplayName%"
HKR,,Icon,,"-20"
;******************************************************************************
; Manufacturer section
;------------------------------------------------------------------------------
[Manufacturer]
%S_Mfg%=_Devices
;******************************************************************************
; Device section
;------------------------------------------------------------------------------
[_Devices]
; *** The following line has been generated by USBIO Installation Wizard. ***
%S_DeviceDesc%=_Install1, USB\VID_09B2&PID_0001&REV_0001
;******************************************************************************
; Install section ( Device1 )
;------------------------------------------------------------------------------
; driver-specific, Win98
[_Install1]
CopyFiles=_CopyFiles_sys
AddReg=_AddReg_SW1, _AddReg_98, _Parameters1_98
; device-specific, Win98
[_Install1.HW]
AddReg=_AddReg_HW1
; driver-specific, Win2000
[_Install1.NTx86]
CopyFiles=_CopyFiles_sys
AddReg=_AddReg_SW1, _Parameters1_NT
; service-install, Win2000
[_Install1.NTx86.Services]
AddService = %S_DriverName%, 0x00000002, _NT_AddService, _NT_EventLog
; device-specific, Win2000
[_Install1.NTx86.HW]
AddReg=_AddReg_HW1
;******************************************************************************
; Install section ( Device2 )
; may be repeated to support more than one device
;------------------------------------------------------------------------------
; ...
;******************************************************************************
; NT Service sections (Win2000 only)
;------------------------------------------------------------------------------
[_NT_AddService]
DisplayName = %S_ServiceDisplayName%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; demand
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\%S_DriverName%.sys
[_NT_EventLog]
AddReg=_NT_EventLog_AddReg
[_NT_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\%S_DriverName%.sys"
HKR,,TypesSupported, 0x00010001,7
;******************************************************************************
; Registry sections ( Device1 )
;------------------------------------------------------------------------------
[_AddReg_98]
; required standard entries
HKR,,NTMPDriver,,%S_DriverName%.sys
HKR,,DevLoader,,*ntkern
[_AddReg_SW1]
; create registry key used to store configuration parameters
HKLM,"%S_ConfigPath%",,,
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",,,
[_AddReg_HW1]
; Create a link to the configuration key. This is absolute required!
HKR,,USBIO_ConfigurationPath,,\Registry\Machine\%S_ConfigPath%\%S_DeviceConfigPath1%
; parameters used on Windows 98, Windows ME
[_Parameters1_98]
; Set the default behaviour of the driver for Windows 98 and Windows ME.
; For a description of the parameters, refer to the USBIO Reference Manual.
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnOpen,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",EnableRemoteWakeup,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUsed,0x00010001, 2
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUnused,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",AbortPipesOnPowerDown,0x00010001, 1
; parameters used on Windows 2000
[_Parameters1_NT]
; Set the default behaviour of the driver for Windows 2000
; For a description of the parameters, refer to the USBIO Reference Manual.
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnOpen,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",EnableRemoteWakeup,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUsed,0x00010001, 2
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUnused,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",AbortPipesOnPowerDown,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",SuppressPnPRemoveDlg,0x00010001, 1
;******************************************************************************
; Registry sections ( Device2 )
; may be repeated to support more than one device
;------------------------------------------------------------------------------
; ...
;******************************************************************************
; Copy Files section
;------------------------------------------------------------------------------
[_CopyFiles_sys]
; Specify the correct file name of the driver binary.
ebookman.sys
[_CopyFiles_inf]
; The INF file will be copied automatically by the device installer
ebookman.inf
;******************************************************************************
; Options
;------------------------------------------------------------------------------
[ControlFlags]
; Advanced options can be specified here.
; For details, refer to the Windows 2000 DDK.
;******************************************************************************
; Destination Directories
;------------------------------------------------------------------------------
[DestinationDirs]
DefaultDestDir = 11 ; SYSTEM directory
_CopyFiles_sys = 10,System32\Drivers
_CopyFiles_inf = 17 ; INF directory
;******************************************************************************
; Disk Layout
;------------------------------------------------------------------------------
[SourceDisksNames]
1=%S_DiskName%,,
[SourceDisksFiles]
%S_DriverName%.sys=1
;******************************************************************************
; Text Strings
;------------------------------------------------------------------------------
[Strings]
; Edit the strings in this section to met your preferences.
; Some of the strings are shown at the user interface.
; provider name
S_Provider="Franklin Electronic Publishers"
; manufacturer name
S_Mfg="Franklin Electronic Publishers, Inc."
; device class display name, shown in Device Manager
S_DeviceClassDisplayName="Franklin eBookMan Devices"
; device description
; *** The following line has been generated by USBIO Installation Wizard. ***
;S_DeviceDesc="FEP_DEVICES: VID=09B2 PID=0001 (eBookMan® Device)"
S_DeviceDesc="eBookMan® Device"
; device description
S_DeviceDesc1="eBookMan® Device"
; disk name
S_DiskName="eBookMan® Install Disk"
; file name of driver executable
; If the name is modified, the _CopyFiles_sys section must also be modified !
S_DriverName="ebookman"
; service display name
S_ServiceDisplayName="FEP_USB Driver"
; configuration registry path (where the registry parameters will be located)
; IMPORTANT: MUST BE underneath SYSTEM\CurrentControlSet\Services !
; The string should be build in the form:
; SYSTEM\CurrentControlSet\Services\<DriverName>
S_ConfigPath="SYSTEM\CurrentControlSet\Services\FEP_USB"
; device-specific configuration registry path
S_DeviceConfigPath1="Parameters"
; device-specific base names
; Only needed if static device names are used, otherwise unused.
; See comments on the value USBIO_DeviceBaseName above.
S_DeviceBaseName1="FEP_USB_Device"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.