SCO UNIX Environment
ACARD AEC671X PCI Ultra SCSI Adapter SCO UNIX 3.2.x Device Driver
First, You need a installed SCO UNIX 3.2.x or SCO Open Desktop 3.x system.
1) Boot your SCO UNIX system.
2) Use doscp command to copy the file AEC671X.tar to your /tmp directory.
e.g. if you are using floppy drive A, type
doscp a:/scounix/AEC671X.tar /tmp
3) Insert a SCO UNIX-formatted empty diskette(EAFS file system).
4) Now, Mount floppy to directory /topfdd.
Type following commands mount /dev/fd0135ds18 /topfdd
(for 1.44MB diskette only,See follows)
cd /topfdd
tar xvf /tmp/aec671x.tar .
cd /
umount /topfdd
Your floppy drive 0 device name could be:
fd096ds15 --> 5.25 DSHD
fd0135ds18 --> 3.5 DSHD
fd048ds9 --> 5.25 DSDD
fd0135ds9 --> 3.5 DSDD
You are now ready to install the driver package for ACARD AEC671X
The ACARD driver diskette can use "custom"(UNIX shell) or "link"(boot time)
to install SCSI driver and rebuild UNIX kernel. Normally "link" is for boot
SCSI device or first time fresh installation.
Start the installation by Fresh installtion,You need use "link" as follows:
1) Insert SCO UNIX boot disk(N1 or P1) and power on
2) When system boot from N1 or P1 type "link" and press <Enter> key
as follows :
SCO UNIX System V/386 on 80486
Boot
:link <Enter>
3) SCO UNIX will ask you package name. You need type "ATP"
and <Enter> as follows :
What packages do you need linked in the system,
or q to quit?:ATP <Enter>
4) Then follow the SCO UNIX installation procedure until installed
complete.
If ACARD AEC671X is not a boot device. You can start the installation
by typing "custom" under UNIX shell as follows :
%custom
You need relink the UNIX kernel and reboot your system for the new kernel.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.