1. netmon2.zip Driver
  2. OEMNSVBH.INF File Contents

OEMNSVBH.INF Driver File Contents (netmon2.zip)

[Identification]
    OptionType = NetService
[Options]
    NETMON
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "transport"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
Manufacturer    = "Microsoft"
ProductMajorVersion     = "3"
ProductMinorVersion     = "5"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "bh"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\bhnt.sys"
NetRuleSoftwareType     = "bloodhound ndisTransport bhService"
NetRuleSoftwareClass    = {"bhService ndisTransport"}
NetRuleSoftwareUse      = $(SoftwareType)" yes yes"
NetRuleSoftwareBindForm = """bh"" yes yes simple"
ProductNMAgentName	= "nmagent"
ProductNMAgentImagePath	= "%SystemRoot%\System32\nmagent.exe"
ProductNMAgentSvcType	= "service"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)"\Parameters"
ServiceKeyName    = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)
NMAgentKeyName    = $(!NTN_ServiceBase)"\"$(ProductNMAgentName)
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        goto returnoptions
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    Debug-Output "OEMNSVBH.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
    Debug-Output "OEMNSVBH.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNSVBH.INF: ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        set Error = $($R0)
        set from = end
        set to = end
        goto nonfatalinfo
    else
        set StartLabel = installadapter
    endif
    set RadioDefault = 2
    set RadioIn = {$(RadioDefault)}
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
            $(ProductVersion)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        goto end
    endif
    CloseRegKey $(KeyProduct)
    goto installproduct
installproduct = +
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
    ;    Ifstr(i) $(DoCopy) == "YES"
    ;       Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
    ;       Ifint $($ShellCode) != $(!SHELL_CODE_OK)
    ;           Goto ShellCodeError
    ;       Else-Ifstr(i) $($R0) == STATUS_FAILED
    ;           Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
    ;           ifint $($ShellCode) != $(!SHELL_CODE_OK)
    ;               goto ShellCodeError
    ;           endif
    ;           set Error = $($R0)
    ;           Goto fatal
    ;       Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
    ;           Goto successful
    ;       Endif
    ;       Set SrcDir = $($R1)
    ;    Endif
    ;    install "Install-Option"
    ;    ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
    ;       Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
    ;       ifint $($ShellCode) != $(!SHELL_CODE_OK)
    ;           goto ShellCodeError
    ;       endif
    ;       set Error = $($R0)
    ;       goto fatal
    ;    endif
        set OEM_ABANDON_ON = TRUE
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareDisplayName), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "", {}, "",+
            $(NetEventDLL)
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) !=  NO_ERROR
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalRegistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set BhServiceKey        = $($R3)
        set KeyParameters       = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(BhServiceKey)
            CloseRegKey $(SoftLinkageKey)
            CloseRegKey $(KeyParameters)
            goto fatalRegistry
        endif
        set NewValueList = {{type    ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
                            {use     ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(BhServiceKey)
            CloseRegKey $(SoftLinkageKey)
            CloseRegKey $(KeyParameters)
            goto fatalRegistry
        endif
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftLinkageKey)
        set NewValueList = {{Nal,$(NoTitle),$(!REG_VT_MULTI_SZ),{"NDIS30","RNAL"}}, +
                            {EnableStationQueries,$(NoTitle),$(!REG_VT_DWORD),1}}
        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(BhServiceKey)
            goto fatalRegistry
        endif
        CloseRegKey $(KeyParameters)
        CreateRegKey $(BhServiceKey) {"Performance",$(NoTitle),GenericClass} "" +
                $(MAXIMUM_ALLOWED) "" KeyPerformance
        set NewValueList = {{Library,$(NoTitle),$(!REG_VT_SZ),bhmon.dll}, +
                            {Open,$(NoTitle),$(!REG_VT_SZ),"BhOpenPerformanceData"}, +
                            {Close,$(NoTitle),$(!REG_VT_SZ),"BhClosePerformanceData"}, +
                            {Collect,$(NoTitle),$(!REG_VT_SZ),"BhCollectPerformanceData"}}
        Shell  $(UtilityInf), AddValueList, $(KeyPerformance), $(NewValueList)
        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(KeyPerformance)
            CloseRegKey $(BhServiceKey)
            goto fatalRegistry
        endif
        CloseRegKey $(KeyPerformance)
        Shell $(UtilityInf), CreateService, $(ProductNMAgentName),+
            $(ProductNMAgentDisplayName),+
            $(ProductNMAgentImagePath),+
            $(ProductNMAgentSvcType), "",+
            {"bh"}, ""
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNSVBH.INF: ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNSVBH.INF: Registry error creating Network Monitor Agent service"
            goto fatalregistry
        endif
    endif
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    Shell $(UtilityInf), RemoveService,  $(ProductNMAgentName), "YES"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        SetRegValue $(KeyProduct) {"Description",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)}
        SetRegValue $(KeyProduct) {"Title",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)}
        CloseRegKey $(KeyProduct)
        OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(MAXIMUM_ALLOWED) ServiceKey
        ifstr(i) $(ServiceKey) != ""
            SetRegValue $(ServiceKey) {"DisplayName",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDisplayName)}
            CloseRegKey $(ServiceKey)
        endif
        OpenRegKey $(!REG_H_LOCAL) "" $(NMAgentKeyName) $(MAXIMUM_ALLOWED) NMAgentKey
        ifstr(i) $(NMAgentKey) != ""
            SetRegValue $(NMAgentKey) {"DisplayName",$(NoTitle),$(!REG_VT_SZ),$(ProductNMAgentDisplayName)}
            CloseRegKey $(NMAgentKey)
        endif
    else
        goto fatalregistry
    endif
    goto end
successful = +
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto removeadapter
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
        AddSectionFilesToCopyList Files-DRIVERS $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-DRIVERS $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Source Media Descriptions]
    1 = "Windows NT Workstation CD-ROM" , TAGFILE = cdrom.w
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
2,	oemsetup.inf,	 SIZE=1000,	RENAME=$(!UG_Filename)
[Files-DRIVERS]
1,BHNT.SYS , SIZE=999
[Files-NETMON]
1,BHMON.DLL , SIZE=999
1,BHNETB.DLL , SIZE=999
1,BHSUPP.DLL , SIZE=999
1,NAL.DLL , SIZE=999
1,NDIS30.DLL , SIZE=999
1,NMAGENT.EXE , SIZE=999
1,RNAL.DLL , SIZE=999
[LanguagesSupported]
    ENG
[OptionsTextENG]
    NETMON     = "Network Monitor Agent"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "Network Monitor Agent"
ProductSoftwareDescription      = "Microsoft Network Monitor Agent"
ProductSoftwareDisplayName = "Network Monitor Agent Driver"
ProductSoftwareTitle    = "Network Monitor Agent"
ProductNMAgentDisplayName = "Network Monitor Agent"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web1, load: 1.03