;=================================================================== ; Ethernet initialization file ;=================================================================== [ETYPE_EXCEPTIONS] 0x0200 = PUP 0x0201 = PUPAT ; USED BY ETHERNET AND SNAP PROTOCOLs [ETYPES] 0x600 = XNS 0x800 = IP 0x806 = ARP_RARP,1 0x0bad = VINES_IP 0x8035 = ARP_RARP,2 0x809B = LAP 0x80F3 = AARP 0x8137 = IPX 0x8138 = IPX ; USED BY TOKEN RING [TOKEN_RING] 0x01 = LLC 0x00 = TMAC 0xba = VINES_IP ; USED BY FDDI ; Note that the low nibble is masked (byte & 0xf0) [FDDI] 0x50 = LLC 0x40 = SMT 0x00 = SMT 0xD0 = LLC 0x10 = LLC 0x90 = LLC 0x80 = MAC 0xC0 = MAC ; USED TO DETERMINE IF RAW IPX PACKETS ARE TO BE DETECTED [FORCE_RAW_IPX] FDDI = YES ETHERNET = YESDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.