1. Z0232R01.EXE Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (Z0232R01.EXE)

System Requirements
====================

The recommended minimum system for running Softex BayManager  includes the following 
components:

·         A Pentium computer with one or more device bays

·         Microsoft Windows 95, Windows 98 or Windows 98 Second Edition  

·         At least 5MB of free hard disk space available on your computer


Installing the Softex BayManager Software
==========================================

Before you install Softex BayManager software, we recommend that you close all 
applications and that any critical data files on your computer are backed up as 
a safety precaution.  If you already have a previous version of Softex BayManager 
installed in the system, please refer to the section, Upgrading the Softex 
BayManager Software, for directions on how to upgrade your system to the latest 
level of Softex BayManager.

To install Softex BayManager for the first time on a system:

1.        Insert Disk 1 of the Softex BayManager software into drive A:.  

*Note:  If your installation media is a CDROM, then insert the CDROM into the CDROM 
        drive and follow the installation directions that are automatically displayed.

2.        Click the Start button on the Windows Taskbar.

3.        Choose Run… and enter A:\SETUP.EXE.  

*Note:  If your installation media is a CDROM, click on the displayed hyperlink 
        to install Softex BayManager.

4.        Follow the directions displayed in the Softex BayManager installation 
          program.  Specify a pathname in which you want Softex BayManager to be 
          installed.

5.        Reboot your system when prompted by the setup program.  Once the system 
          is running again, you can use the Softex BayManager software.

The installation program automatically places an icon, Softex BayManager, in the 
Windows Control Panel.  Please refer to Chapter 2, Quick Guide to Using BayManager, 
for instructions on how to use BayManager. 


Un-Installing the Softex BayManager Software
=============================================

If you already have a version of Softex BayManager installed in the system, you can 
un-install that software by following the steps below:

1.        Insert Disk 1 of the Softex Power Management Controller software into drive A:.  

*Note:  If your installation media is a CDROM, then insert the CDROM into the CDROM drive.

2.        Click the Start button on the Windows Taskbar.  Select Settings, and then 
          Control Panel.

3.        Double-click the Add/Remove Programs Control Panel.

4.        Select Softex BayManager, and then click the Add/Remove... button.

5.        Follow the directions to un-install the Softex BayManager program

6.        Reboot your system when prompted by the setup program.

After un-installing Softex BayManager, you will no longer be able to hot or warm swap 
the devices in your system bay(s).  You will need to shut off your computer to change 
bay devices.



Upgrading from a Previous Version of BayManager Software
=========================================================

 

If you already have a version of Softex BayManager installed in the system, you must 
upgrade your system to Softex BayManager  

1.        Un-install the previous version of Softex BayManager software.  Follow the 
          steps outlined in the section, Un-Installing the Softex Power Management 
          Controller Software, earlier in this chapter.

2.        After the system has been rebooted, you can install the new version of 
          Softex BayManager.  Follow the steps outlined in the section, Installing 
          the Softex BayManager Software, earlier in this chapter.  You can use these 
          steps because you have already un-installed the previous version of Softex 
          BayManager.

3.        Reboot the system.  Now you can use the new version of Softex BayManager.