; =============================================================== ; OEMSETNT.INF for 3Com Megahertz 10/100 LAN CardBus PC Card ; --------------------------------------------------------------- ; HISTROY V2.0 - 3C575 EtherDisk NDIS3/4 Driver Installation ; V2.1 - 3/30/98 Fixed 3Com Tray icon problem ; %VER V2.2 - 4/8/98 Fixed bug HQ148 - Gateway problem ; =============================================================== [Identification] OptionType = NetAdapter [PlatformsSupported] ISA PCI PCMCIA "Jazz-Internal Bus" [Options] Elbt575 [OptionsTextENG] Elbt575 = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)" [AllFileConstants] GenericInfVersion = " v2.00" UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" TrayIconExe = "comsmd.exe -try" UninstallExe = "un3c575" UnInstallName = "3Com PC Card Diagnostics Utilities" Manufacturer = "3Com" ;Vivek DISABLEPCMCIASYS = "0" ;DISABLEPCMCIASYS = "1" ;Vivek [FileConstants-Elbt575] GenericAdapterName = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)" GenericDriverName = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)" ;ms; GenericSysName = "Elpc575.sys" GenericName = "Elbt575" ProductMajorVersion = "2" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "Elbt575" ProductSoftwareDescription = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)" ;ms; ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName) NetRuleSoftwareType = "Elbt575Sys ndisDriver Elbt575Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """Elbt575Sys"" yes no container" NetRuleSoftwareClass = {"Elbt575Driver basic"} NetRuleSoftwareBindable = {"Elbt575Driver Elbt575Adapter non exclusive 100"} ProductHardwareName = "Elbt575" ProductHardwareDescription = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)" NetRuleHardwareType = "Elbt575 Elbt575Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"Elbt575Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" VERS1Manufacturer = "3Com" VERS1Product = "Fast EtherLink XL PC Card" VERS1Type = "Elbt575-FastEtherLink" PCMCIA = 0 [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers NT350VersionConstant = "3.50" NT310VersionConstant = "3.10" NT400VersionConstant = "(4.0)" DIAGCARDTYPE = "3C575" [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [DiagRegistry] OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTKEY OpenRegKey $(SOFTKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY ifstr $(COMKEY) == "" CreateRegKey $(SOFTKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY endif OpenRegKey $(COMKEY) "" "TNICDIAG" $(!REG_KEY_WRITE) TNICDIAGKEY ifstr $(TNICDIAGKEY) == "" CreateRegKey $(COMKEY) {"TNICDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TNICDIAGKEY endif OpenRegKey $(TNICDIAGKEY) "" "3C575" $(!REG_KEY_WRITE) 3C575KEY ifstr $(3C575) == "" CreateRegKey $(3C575KEY) {"3C575", 0, GenericClass} "" $(!REG_KEY_WRITE) "" 3C575KEY endif SetRegValue $(3C575KEY) {"DriverNames", 0, $(!REG_VT_SZ), "SYSTEM\EL575ND3.SYS;SYSTEM\EL575ND4.SYS"} OpenRegKey $(3C575KEY) "" "Extentions" $(!REG_KEY_WRITE) ExtentionsKEY ifstr $(ExtentionsKEY) == "" CreateRegKey $(3C575KEY) {"Extentions", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ExtentionsKEY endif ;OpenRegKey $(ExtentionsKEY) "" "Pace" $(!REG_KEY_WRITE) PaceKEY ; ifstr $(PaceKEY) == "" ; CreateRegKey $(ExtentionsKEY) {"Pace", 0, GenericClass} "" $(!REG_KEY_WRITE) "" PaceKEY ;endif ;SetRegValue $(PaceKEY) {"CPLName", 0, $(!REG_VT_SZ), "PACECFG.CPL"} CloseRegKey $(SOFTKEY) CloseRegKey $(COMKEY) CloseRegKey $(TNICDIAGKEY) CloseRegKey $(3C575KEY) CloseRegKey $(ExtentionsKEY) ; CloseRegKey $(PaceKEY) return [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) Set !DebugOutputControl = 0 set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms AllFileConstants Debug-Output "InstallOption : 1 Option "$(Option) read-syms FileConstants"-"$(Option) Debug-Output "InstallOption : 2 " read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms AllFileConstants$(!STF_LANGUAGE) read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt Ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue) CloseRegKey $(KeyNt) Endif ;ms; ;; NT v4.00 has NDIS4 ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) set NDIS_DISK_A = NDIS3_4 set NDIS_VER = NDIS4 set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL575ND4.SYS" else set NDIS_DISK_A = NDIS3_4 set NDIS_VER = NDIS3 set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL575ND3.SYS" endif ;ms; ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) Debug-Output "$(InfFile) $(Option): Configureadapter" set Error = "Windows NT v3.10 is not support by this product" goto fatal endif Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ;Vivek set IRQValue = *($(IRQList), 1) ;set IRQValue = *($(IRQList), 5) ;Vivek set IOBaseAddrValue = *($(IOBaseAddrList), 1) ;Vivek set MemoryAddrValue = *($(MemoryAddrList), 1) ;set MemoryAddrValue = *($(MemoryAddrList), 9) ;Vivek Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif ;ms; Set FileToCheck = $($R1)\OEMSETNT.INF LibraryProcedure FilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck) Ifstr(i) $(FilePresent) != "YES" Goto installadapter Endif ;ms; Set SrcDir = $($R1) install "Install-Dll" ;Vivek1 Debug-Output "Install-tnicdiag" ;install "Install-tnicdiag" ;Vivek2 StartWait ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) Debug-Output "$(InfFile) $(Option): Windows NT 4.00" ;Vivek1 ; OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt ; set TrayIconList = {COMSMDEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)} ; SetRegValue $(KeyNt) $(TrayIconList) ; Debug-Output "Install-TraynCpl" ; install "Install-TrayAndCpl" ; CloseRegKey $(KeyNt) ;RunProgram ExitCode "Windows Directory" "" COMSMD.EXE "-setup" ;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" $(!REG_KEY_ALL_ACCESS) KeyNt ;ifstr $(KeyNt) == "" ;CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt ;endif ;OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2 ;ifstr $(KeyNt2) == "" ;CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt2 ;endif ;set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com PC Card Diagnostics"},+ ;{UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C575.EXE"}} ;Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList) ;ifint $($ShellCode) != $(!SHELL_CODE_OK) ;goto ShellCodeError ;endif ;CloseRegKey $(KeyNt) ;CloseRegKey $(KeyNt2) ;Vivek2 endif EndWait goto adaptersetup configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress" set MemoryAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "SocketNumber" set SocketIndex = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueIndex = $(ValueData) ;Vivek else-ifstr(i) $(ValueName) == "AdapterName" set OldAdapterName = $(ValueData) Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName) ;Vivek endif EndForListDo set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex))) ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQList), 2) endif set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex))) ifstr(i) $(MemoryAddrValue) == "" set MemoryAddrValue = *($(MemoryAddrValues), 21) endif set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif set SocketValue = *($(SocketList), ~($(SocketValues),$(SocketIndex))) ifstr(i) $(SocketValue) == "" set SocketValue = *($(SocketValues), 0) endif adaptersetup = + LoadLibrary "disk 1" $(DialogDllName) hLib read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option) set ENABLER = 0 ui start "InputDlg" $(hLib) Debug-Output "adaptersetup 3" set ExitButton = $(ButtonPressed) FreeLibrary $(hLib) ifstr(i) $(DLGEVENT) == "CONTINUE" set IOBaseAddrIndex = $(Combo1Out) set MemoryAddrIndex = $(Combo2Out) set IRQValueIndex = $(Combo3Out) set SocketIndex = $(Combo7Out) set ExitButton = $(ButtonPressed) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else set CommonStatus = STATUS_USERCANCEL ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + set BusTypeNum = 1 ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ;Vivek ifstr $(OldAdapterName) == "" Debug-Output "<DBG> setting OldAdapterName" set OldAdapterName = $(ProductHardwareName)$(AdapterNumber) endif Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName) ;Vivek set MemoryAddrValue = *($(MemoryAddrValues),~($(MemoryAddrList), $(MemoryAddrIndex))) set IRQValue = *($(IRQValues),~($(IRQList), $(IRQValueIndex))) set IOBaseAddrValue = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex))) set SocketValue = *($(SocketValues), ~($(SocketList), $(SocketIndex))) set NewValueList = {{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {IoLength, $(NoTitle),$(!REG_VT_DWORD), 127},+ {MemoryMappedBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+ {MemoryMappedSize, $(NoTitle),$(!REG_VT_DWORD),4096},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+ {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+ {SocketNumber, $(NoTitle),$(!REG_VT_DWORD),$(SocketValue)},+ {TransmitBufferSize, $(NoTitle),$(!REG_VT_DWORD),7168},+ {AdapterType, $(NoTitle),$(!REG_VT_DWORD),0},+ {DriverMode, $(NoTitle),$(!REG_VT_DWORD),1},+ {OSType, $(NoTitle),$(!REG_VT_DWORD),1},+ ;Vivek ;{PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0},+ {SoftexPcmcia, $(NoTitle),$(!REG_VT_DWORD),1},+ {AdapterName, $(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)}} ;Vivek Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ifint $(DISABLEPCMCIASYS) == 1 set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4} CloseRegKey $(PCMCIAKey) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif ;;************Start Uninstaller section*************************************************************;* install "Install-Uninstaller" ;* ;* ;* ;; Set the keys in the registry nessisary for uninstallation ;* OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) KeyNt ;* ;* set TrayIconList = {TNICDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} ;* SetRegValue $(KeyNt) $(TrayIconList) ;* CloseRegKey $(KeyNt) ;* ;* ;set NT key in registry so driver knows what operating system it is ;* OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(!REG_KEY_ALL_ACCESS) KeyNt ;* ;* set LoopList = {1,2,3,4,5,6,7,8} ;* set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES} ;* ;* ForListDo $(LoopList) ;* OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey ;* ;* ifstr $(TestKey) != $(KeyNull) ;* SetRegValue $(TestKey) $(WinNTList) ;* endif ;* ;* CloseRegKey $(TestKey) ;* EndForListDo ;* ;* CloseRegKey $(KeyNt) ;* ;end set NT key section ;* ;;************Stop Uninstaller section**************************************************************;* EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif ifint $(DISABLEPCMCIASYS) == 1 set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0} CloseRegKey $(PCMCIAKey) endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) Debug-Output "$(InfFile) $(Option): Windows NT 4.00 remove icon" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = COMSMDEXE DeleteRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) endif ;Vivek1 ; RunProgram ExitCode "Windows Directory" "" UN3C575.EXE "-inf" ;Vivek2 goto end UpgradeSoftware = + ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) else goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) else goto fatalregistry endif endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMSETNT.INF" return [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" ;Vivek AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers ;AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir)$(NDIS_DISK_A) $(!STF_WINDOWSSYSPATH)\drivers ;Vivek endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURSEOLDER" ;Vivek1 ;AddSectionFilesToCopyList Files-tnicdiag $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) ;AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH) ;Vivek2 ;Vivek AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers ;AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir)$(NDIS_DISK_A) $(!STF_WINDOWSSYSPATH)\drivers ;Vivek AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-tnicdiag] ;Vivek1 ;set STF_VITAL = "" ;AddSectionFilesToCopyList Files-tnicdiag $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) ;AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH) ;set !STF_NCPA_FLUSH_COPYLIST = TRUE ;CopyFilesInCopyList ;Vivek2 Exit [Install-TrayAndCpl] ;Vivek1 ;set STF_VITAL = "" ;AddSectionFilesToCopyList Files-TrayAndCpl $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) ;set !STF_NCPA_FLUSH_COPYLIST = TRUE ;CopyFilesInCopyList ;Vivek1 Exit [Install-Uninstaller] ;Vivek1 ; set STF_OVERWRITE = "VERIFYSOURCEOLDER" ; set STF_VITAL = "" ; AddSectionFilesToCopyList Files-Uninstaller $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) ; set !STF_NCPA_FLUSH_COPYLIST = TRUE ; CopyFilesInCopyList ;Vivek2 Exit [Source Media Descriptions] 1 = "Windows NT Setup Disk #1" 2 = "3Com Megahertz 10/100 LAN CardBus PC Card Installation Disk (Ethernet)" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 2, OEMSETNT.INF, SIZE=58000, RENAME=$(!UG_Filename) [Files-Dll] 2, Elpc575.DLL, SIZE=21000 [Files-tnicdiag] ;2,tnicdiag.exe, SIZE=165504 ;2,tnicdiag.hlp, SIZE=20877 ;2,tvaraddr.txt, SIZE=113 ;2,un3c575.exe, SIZE=100000 [Files-Uninstaller] ;2,UN3C575.EXE, SIZE=100000 [Files-HwDll] ;2,hwaccess.dll, SIZE=20198 ;2,pcomdrv.sys, SIZE=5000 ;2,tc575cfg.dll, SIZE=59458 [Files-TrayAndCpl] ;2,comsmd.exe, SIZE=8957 [Files-NDIS4] 2,EL575ND4.SYS , SIZE=60000 [Files-NDIS3] 2,EL575ND3.SYS , SIZE=60000 ;Vivek [Files-Elbt575] 2,EL575ND4.SYS , SIZE=60000 ;Vivek [LanguagesSupported] ENG [AllFileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" DialogDllName = "Elpc575.DLL" [FileConstantsENG-Elbt575] FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion) ProductSoftwareTitle = $(GenericDriverName) ProductHardwareTitle = $(GenericAdapterName) IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) InterruptStyleValues = ^(InterruptStyleChoices, 2) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) MemoryAddrList = ^(MemoryAddrChoices,1) MemoryAddrValues = ^(MemoryAddrChoices,2) SocketList = ^(SocketChoices, 1) SocketValues = ^(SocketChoices, 2) [DialogConstantsENG-Elbt575] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG-Elbt575] DlgType = "RadioCombination" DlgTemplate = "Elpc575" Caption = $(FunctionTitle) HelpContext = $(!IDH_DB_OEMNADE2_INS) CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO} Combo1Label = "I/O Port:" Combo2Label = "Memory Address:" Combo3Label = "Interrupt:" Combo7Label = "PCCard Socket:" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrValue) Combo2List = $(MemoryAddrList) Combo2Out = $(MemoryAddrValue) Combo3List = $(IRQList) Combo3Out = $(IRQValue) Combo7List = $(SocketList) Combo7Out = $(SocketValue) ComboListItemsIn = {Combo1List,Combo2List,Combo3List, Combo7List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo7Out} EditTextIn = {"",""} EditTextLim = {"",""} [MemoryAddrChoices] MA_0 = "Auto", 0 MA_1 = "0xC8000", 819200 MA_2 = "0xC9000", 823296 MA_3 = "0xCA000", 827392 MA_4 = "0xCB000", 831488 MA_5 = "0xCC000", 835584 MA_6 = "0xCD000", 839680 MA_7 = "0xCE000", 843776 MA_8 = "0xCF000", 847872 MA_9 = "0xD0000", 851968 MA_10 = "0xD1000", 856064 MA_11 = "0xD2000", 860160 MA_12 = "0xD3000", 864256 MA_13 = "0xD4000", 868352 MA_14 = "0xD5000", 872448 MA_15 = "0xD6000", 876544 MA_16 = "0xD7000", 880640 MA_17 = "0xD8000", 884736 MA_18 = "0xD9000", 888832 MA_19 = "0xDA000", 892928 MA_20 = "0xDB000", 897024 MA_21 = "0xDC000", 901120 MA_22 = "0xDD000", 905216 MA_23 = "0xDE000", 909312 [IRQChoices] IRQ_0 = "Auto",0 IRQ_1 = "3",3 IRQ_2 = "4",4 IRQ_3 = "5",5 IRQ_4 = "7",7 IRQ_5 = "9",9 IRQ_6 = "10",10 IRQ_7 = "11",11 IRQ_8 = "15",15 [IOBaseAddrChoices] IOBase_0 = "Auto",0 IOBase_1 = "0x1000",4096 IOBase_2 = "0x1100",4352 IOBase_3 = "0x1200",4608 IOBase_4 = "0x1300",4864 IOBase_5 = "0x1400",5120 IOBase_6 = "0x1500",5376 IOBase_7 = "0x1600",5632 IOBase_8 = "0x1700",5888 IOBase_9 = "0x2000",8192 IOBase_10 = "0x2100",8448 IOBase_11 = "0x2200",8704 IOBase_12 = "0x2300",8960 IOBase_13 = "0x2400",9216 IOBase_14 = "0x2500",9472 IOBase_15 = "0x2600",9728 IOBase_16 = "0x2700",9984 IOBase_17 = "0x3000",12288 IOBase_18 = "0x3100",12544 IOBase_19 = "0x3200",12800 IOBase_20 = "0x3300",13056 IOBase_21 = "0x3400",13312 IOBase_22 = "0x3500",13568 IOBase_23 = "0x3600",13824 IOBase_24 = "0x3700",14080 IOBase_25 = "0x3800",14336 IOBase_26 = "0x3900",14592 IOBase_27 = "0x3A00",14848 IOBase_28 = "0x3B00",15104 IOBase_29 = "0x3C00",15360 IOBase_30 = "0x3D00",15616 IOBase_31 = "0x3E00",15872 IOBase_32 = "0x3F00",16128Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.