F=ma Networks.
F=ma LAP-32 10/100 CardBus Fast Ethernet PC Card
Windows NT Driver Installation
File Description
LAP32.SYS Windows NT 3.51 NDIS 3.0 driver
LAP32.DLL Setup file used during driver installation
WINNT351.TXT This documentation file
Driver installation for Microsoft Windows NT 3.51
---------------------------------------------------
1) From Windows NT desktop, double click on "My Computer",
"Control Panel", and "Network" icons.
2) In the "Network" window, click the "Adapters" tab, and the "Add"
button. In the "Select Network Adapter" window, click the "Have
Disk" button.
3) Insert the F=ma LAP-32 10/100 CardBus Fast Ethernet Card Driver
Disk in the diskette drive.
4) In the "Insert Disk" dialog box, enter the diskette drive path
name, i.e. A:\winnt (or B:\winnt), and then click OK.
5) In the "Select OEM Option" box, select "F=ma LAP-32 10/100 CardBus
Fast Ethernet PC Card", and then click the OK button.
6) When the "F=ma LAP-32 10/100 CardBus Fast Ethernet PC Card Setup"
window shows up, you have to set up the LAP-32 CardBus Card
configuration parameters as described in the next section.
When you are done, click the OK button.
7) In the "Network" window, click the Close button. Windows NT then
goes through a binding process. When this process is complete,
Windows NT prompts you to restart the computer. Click on the
Yes button.
8) Insert the F=ma LAP-32 10/100 CardBus Fast Ethernet PC Card in one
of the CardBus sockets.
Attach the coupler to the back of the card, and connect a cable from
the RJ-45 connector at the back of the coupler to a hub or switch.
Note if you are attaching to a 100 Mbps network, the cable has to be
CAT-5 grade.
You can now shutdown and restart the computer. Please note that during
Windows NT initialization, F=ma LAP-32 10/100 CardBus Fast Ethernet Card
must be properly connected to a hub or switch; otherwise the card and
driver would not come up correctly.
F=ma LAP-32 10/100 CardBus NDIS 3.0 Driver Parameters for Windows NT
---------------------------------------------------------------------
1) Connection_Type:
Specify the attached medium type. Default is AutoSense.
2) I/O_Port:
Specify the starting address of I/O port range.
The default value is D000.
3) Memory_Base_Address:
Specify the starting address of the Shared Memory range.
The default value is D0000.
4) Interrupt_Number:
Specify the IRQ number.
The default value is IRQ 11.
5) Socket_Number:
Specify the socket number in which an LAP-32 10/100 CardBus is
inserted The default value is "Auto detect".
6) Interrupt_Style:
Specify the CardBus bridge interrupt routing strategy.
Default is "PCI-IRQ-Routed".
7) Interrupt_Routing:
Specify which interrupt pin is used while the CardBus
bridge is using "PCI-IRQ-Routed". Default is "INT A".
It is extremely important to assign correct values for the
"Interrupt_Number" (IRQ value) and "Interrupt_Style" parameters.
If the system uses the "PCI-IRQ-Routed" interrupt style, it is also
important to assign the correct PCI "Interrupt_Routing" value (i.e.
INT A or INT B.)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.