;************************************************************** ;* File: oemsetup.inf ;* (c) 1993-1997 Softex, Inc. All Rights Reserved ;* This file contains licensed material from Softex. ;* Unauthorized use of code from this file may be a ;* violation of the licensing agreement. ;**************************************************************/ [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA PCMCIA "Jazz-Internal Bus" [Options] IBMTOK [GeneralConstants] from = "" to = "" retaddr = "" KeyNull = "" StringNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" SpeedList = {16,4} Manufacturer = "Microsoft" ProductMajorVersion = "4" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "IbmTok" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ibmtokd.sys" NetRuleSoftwareType = "ibmtokSys ndisDriver ibmtokDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """IBMTokSys"" yes no container" NetRuleSoftwareClass = {"ibmtokDriver basic"} ProductHardwareName = "IbmTok" NetRuleHardwareType = "ibmtok ibmtokAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"ibmtokAdapter basic"} ProductOpSupport = 134 ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" Combo1TextList = ^(Combo1Choices, 1) Combo1ValueList = ^(Combo1Choices, 2) [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification shell "" DebugControl set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} shell "" DebugControl set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) shell "" DebugControl set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif Debug-Output "OEMNADTK.INF: STF_CWDIR is: "$(!STF_CWDIR) set-subst LF = "\n" read-syms GeneralConstants Debug-Output "nishi" read-syms FileConstants Shell $(UtilityInf), GetBindingInfo, "IBM" ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set NetRuleSoftwareBindable = $($R1) read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT set ActivateDetection = TRUE set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the IBM software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE set ActivateDetection = TRUE endif set IOBaseAddress = 1 Debug-Output "OEMNADTK.INF: ==================================================" Debug-Output "OEMNADTK.INF: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "OEMNADTK.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "OEMNADTK.INF: Option is: "$(Option) Debug-Output "OEMNADTK.INF: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "OEMNADTK.INF: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "OEMNADTK.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "OEMNADTK.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "OEMNADTK.INF: ==================================================" Set DetectedCard = FALSE set CardType = 1 set Pcmcia = FALSE Ifstr(i) $(ActivateDetection) != TRUE Goto skipdetection Endif Set TypeList = {{IOADDR, IOADDR_Addr_List, IOBaseAddress},+ {IRQ, IRQList, Token1IRQVal},+ {MEMADDR, MMIODecList, Token1MMIOVal}} Debug-Output "OEMNADTK.INF: Calling Param_BuildTypeLists" Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList) Set Status = $($R0) ifstr(i) $(Status) != STATUS_SUCCESSFUL Goto fataldetect Endif Debug-Output "OEMNADTK.INF: Calling Param_SetDefaults" Shell $(ParamInf) Param_SetDefaults {} set Token1IRQVal = 0; set Token1MMIOVal = 0; Shell $(ParamInf) HexListFromDecList $(MMIODecList) Set MMIOList = $($R0) Shell $(UtilityInf) SortList $(SpeedList) TRUE FALSE Set Combo1List = $($R0) Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE Set Combo2List = $($R0) Shell $(UtilityInf) SortList $(MMIOList) TRUE FALSE Set Combo3List = $($R0) shell "" DebugControl Ifstr(i) $(!STF_NCDETECT) == YES Debug-Output "NISHI 21" Ifstr(i) $(!STF_NCOPTION) == $(Option) Debug-Output "NISHI 20" Set DetectedCard = TRUE Debug-Output "OEMNADTK.INF: Setting DetectedCard to TRUE" Endif Endif Debug-Output "NISHI 1" skipdetection =+ set from = $(fatal) set to = $(fatal) Debug-Output "NISHI 2" goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif Debug-Output "NISHI 3" Ifstr(i) $(DetectedCard) != TRUE Debug-Output "NISHI 22" Goto adaptersetup Endif StartWait Debug-Output "NISHI 4" Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto adaptersetup Endif Debug-Output "NISHI 5" Set DetectedParams = $($R1) Debug-Output "OEMNADTK.INF: Calling Param_SetDefaults to merge detected params" Shell $(ParamInf) Param_SetDefaults $(DetectedParams) goto adapteroptions configureadapter = + Debug-Output "NISHI 6" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "OEMNADTK.INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADTK.INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "OEMNADTK.INF: FindService Shell error: "$($R0) Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = "CANNOT_FIND_COMPONENT_SERVICE" Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE ) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "IOBaseAddress" set IOBaseAddress = $(ValueData) else-Ifstr(i) $(ValueName) == "NetworkAddress" set NetworkAddress = $(ValueData) else-ifstr(i) $(ValueName) == "BusType" set BusInterfaceType = $(ValueData) else-ifstr(i) $(ValueName) == "BusNumber" set BusNumber = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set Token1IRQVal = $(ValueData) else-ifstr(i) $(ValueName) == "RingSpeed" set Token1Speed = $(ValueData) else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress" set Token1MMIOVal = $(ValueData) else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress_1" set Token1RAM = $(ValueData) else-ifstr(i) $(ValueName) == "MemoryMappedSize" set Token1MMIOSize = $(ValueData) else-ifstr(i) $(ValueName) == "MemoryMappedSize_1" set Token1RAMSize = $(ValueData) else-ifstr(i) $(ValueName) == "Pcmcia" set Pcmcia = $(ValueData) endif EndForListDo Debug-Output "NISHI 15" adaptersetup =+ Debug-Output "NISHI 7" Shell $(ParamInf) Param_ParameterConfidence Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNADTK.INF: parameter confidence too low to bypass configuration" Goto adapteroptions Endif Ifstr(i) $(DetectedCard) == TRUE Debug-Output "NISHI 8" Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM set BusInterfaceType = *($(!STF_NCDETINFO),5) set BusNumber = *($(!STF_NCDETINFO),6) Goto adapterverify Endif Endif goto adapteroptions adapteroptions = + set from = adapteroptions ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 1 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif goto adapterverify endif ifstr(i) $(!STF_NCDETINFO) == {} Debug-Output "NISHI 8" Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardwareDescription) $(BusInterfaceType) $(BusNumber) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set BusInterfaceType = $($R1) set BusNumber = $($R2) else Debug-Output "NISHI 9" set BusInterfaceType = *($(!STF_NCDETINFO),5) set BusNumber = *($(!STF_NCDETINFO),6) endif set Pcmcia = 0 ifstr(i) $(BusInterfaceType) == 8 Debug-Output "NISHI 10" set Combo1DlgValue = *($(Combo1TextList),+ ~($(Combo1ValueList), + $(IOBaseAddress))) read-syms FileDependentPCMCIADlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set IOBaseAddress = *($(Combo1ValueList),+ ~($(Combo1TextList),+ $(Combo1Out))) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif set Pcmcia = 1 set Token1MMIOSize = 8192 set Token1RAMSize = 16384 Set NewList = {Auto} ForListDo $(IRQList) Set NewList = >($(NewList),$($)) EndForListDo Set IRQList = {} ForListDo $(NewList) Set IRQList = >($(IRQList),$($)) EndForListDo Set NewList = {0} ForListDo $(MMIODecList) Set NewList = >($(NewList),$($)) EndForListDo Set MMIODecList = {} ForListDo $(NewList) Set MMIODecList = >($(MMIODecList),$($)) EndForListDo Set NewList = {Auto} ForListDo $(MMIOList) Set NewList = >($(NewList),$($)) EndForListDo Set MMIOList = {} ForListDo $(NewList) Set MMIOList = >($(MMIOList),$($)) EndForListDo read-syms SecondPCMCIADlg$(!STF_LANGUAGE) ifstr(i) $(Token1IRQVal) == "" set Token1IRQVal = *($(IRQList), 1) endif ifstr(i) $(Token1MMIO) == "" set Token1MMIO = *($(MMIOList), 1) endif ifstr(i) $(Token1Speed) == "" set Token1Speed = *($(SpeedList), 1) endif set Token1MMIO = *($(MMIOList), ~($(MMIODecList),+ $(Token1MMIOVal))) set Combo1Out = $(Token1Speed) set Combo2Out = $(Token1IRQVal) set Combo3Out = $(Token1MMIO) ui start "Config" ifstr(i) $(DLGEVENT) == "CONTINUE" set Token1Speed = $(Combo1Out) set Token1IRQVal = $(Combo2Out) set Token1MMIO = $(Combo3Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif set Token1MMIOVal = *($(MMIODecList), ~($(MMIOList),+ $(Token1MMIO))) ifstr(i) $(Token1MMIOVal) == 0 Set Token1RAM = 0 else Set-add Token1RAM = $(Token1MMIOVal),8192 endif else Debug-Output "NISHI 11" ifstr(i) $(IOBaseAddress) == 2592 set IOBaseAddress = 1 else-ifstr(i) $(IOBaseAddress) == 2596 set IOBaseAddress = 2 else-ifstr(i) $(IOBaseAddress) == "" set IOBaseAddress = 1 endif set RadioIn = {$(IOBaseAddress)} read-syms FileDependentDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set IOBaseAddress = *($(RadioOut),1) set NetworkAddress = *($(EditTextOut),1) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif ;; NG Set NewList = {Auto} ForListDo $(IRQList) Set NewList = >($(NewList),$($)) EndForListDo Set IRQList = {} ForListDo $(NewList) Set IRQList = >($(IRQList),$($)) EndForListDo ;;NG set Token1MMIOSize = 8192 set Token1RAMSize = 16384 ;;set Token1IRQVal = 10 read-syms SecondDlg$(!STF_LANGUAGE) ifstr(i) $(Token1IRQVal) == "" set Token1IRQVal = *($(IRQList), 1) endif ifstr(i) $(Token1MMIO) == "" set Token1MMIO = *($(MMIOList), 1) endif ifstr(i) $(Token1Speed) == "" set Token1Speed = *($(SpeedList), 1) endif set Token1MMIO = *($(MMIOList), ~($(MMIODecList),+ $(Token1MMIOVal))) set Combo1Out = $(Token1Speed) set Combo2Out = $(Token1IRQVal) set Combo3Out = $(Token1MMIO) ui start "Config" ifstr(i) $(DLGEVENT) == "CONTINUE" set Token1Speed = $(Combo1Out) set Token1IRQVal = $(Combo2Out) set Token1MMIO = $(Combo3Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif set Token1MMIOVal = *($(MMIODecList), ~($(MMIOList),+ $(Token1MMIO))) ifstr(i) $(Token1MMIOVal) == 0 Set Token1RAM = 0 else Set-add Token1RAM = $(Token1MMIOVal),8192 endif Debug-Output "NISHI 12" endif adapterverify =+ Ifstr(i) $(DetectedCard) != TRUE Goto skipoptions Endif Debug-Output "OEMNADTK.INF: Calling Param_VerifyCard" Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "OEMNADTK.INF: Param_VerifyCard succeeded" Goto skipoptions Endif Set from = adapteroptions Set to = skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto Warning skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + ifstr(i) $(BusInterfaceType) == 8 set NewValueList = {{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddress)},+ {IoLength,$(NoTitle),$(!REG_VT_DWORD),7},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {SoftexDock,$(NoTitle),$(!REG_VT_DWORD),1},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),1},+ {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+ {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(Token1IRQVal)},+ {RingSpeed,$(NoTitle),$(!REG_VT_DWORD),$(Token1Speed)},+ {MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(Token1MMIOVal)},+ {MemoryMappedBaseAddress_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAM)},+ {PCCardMemoryWindowOffset,$(NoTitle),$(!REG_VT_DWORD),$(Token1MMIOVal)},+ {PCCardMemoryWindowOffset_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAM)},+ {MemoryMappedSize,$(NoTitle),$(!REG_VT_DWORD),$(Token1MMIOSize)},+ {MemoryMappedSize_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAMSize)},+ {RingSpeed,$(NoTitle),$(!REG_VT_DWORD),$(Token1Speed)}} ;nishi ; {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),$(Pcmcia)}} else set Token1MMIOVal = 901120 set Token1RAM = 917504 set Token1RAMSize = 16384 set NewValueList = {{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddress)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),2},+ {SoftexDock,$(NoTitle),$(!REG_VT_DWORD),1},+ {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+ {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(Token1IRQVal)},+ {MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(Token1MMIOVal)},+ {MemoryMappedBaseAddress_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAM)},+ {MemoryMappedSize_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAMSize)}} endif Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyParameters) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif set iSearch = 1 nextnetcard = + Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName), $(iSearch) set KeyNetcard = $($R0) set iSearch = $($R1) Debug-Output "OemNadEp.Inf: FindNextNetworkCard "$(KeyNetcard)","$(iSearch) Ifstr $(KeyNetcard) != $(KeyNull) Debug-Output "OemNadEp.Inf: Setting OperationsSupport value" SetRegValue $(KeyNetcard) {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)} CloseRegKey $(KeyNetcard) goto nextnetcard Endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers exit [DebugControl] set !DebugOutPutControl = 1 return [Source Media Descriptions] 1 = "Softex PC Card Client Drivers Disk" [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-IBMTok] 1,IBMTOKD.SYS , SIZE=999 [LanguagesSupported] ENG [OptionsTextENG] IBMTOK = "IBM Token Ring (ISA/PCMCIA) Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "IBM Token Ring Adapter Card Setup" FunctionTitle1 = "IBM Token Ring PCMCIA Adapter Card Setup" ProductSoftwareDescription = "IBM Token Ring (ISA/PCMCIA) Adapter Driver" ProductHardwareDescription = "IBM Token Ring (ISA/PCMCIA) Adapter" ProductSoftwareTitle = "IBM Token Ring Adapter (ISA/PCMCIA) Driver" ProductHardwareTitle = "IBM Token Ring (ISA/PCMCIA) Adapter" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Group1 = "I/O Port Base Address" Radio1 = "&Primary" Radio2 = "&Secondary" Edit1Label = "&Network Address:" DlgType = "RadioCombination" DlgTemplate = "IBM_TOKEN" Caption = $(FunctionTitle) ComboListItemsIn = {} ComboListItemsOut = {} EditTextLim = 17 EditTextIn = $(NetworkAddress) OptionsGreyed = {} HelpContext = $(!IDH_DB_OEMNADTK_INS) RCCtlFocusOn = 403 [FileDependentPCMCIADlgENG] Label1 = "I/O Port Address:" DlgType = Combination DlgTemplate = "SINGLE_COMBO" Caption = $(FunctionTitle) Combo1List = $(Combo1TextList) Combo1Out = $(Combo1DlgValue) RadioIn = {} ComboListItemsIn = {Combo1List} ComboListItemsOut = {Combo1Out} OptionsGreyed = {} HelpContext = $(!IDH_DB_OEMNADTK_INS) RCCtlFocusOn = 403 [SecondPCMCIADlgENG] Group1 = "Network Speed" HelpContext = 1 Caption = $(FunctionTitle1) Combo1Label = "Network &Speed:" Combo2Label = "Card &IRQ Level:" Combo3Label = "Memory &Base:" Combo1List = $(SpeedList) Combo1Out = $(Token1Speed) Combo2List = $(IRQList) Combo2Out = $(Token1IRQVal) Combo3List = $(MMIOList) Combo3Out = $(Token1MMIO) DlgType = Combination DlgTemplate = "WD" ComboListItemsIn = {Combo1List, Combo2List, Combo3List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out} CBOptionsGreyed = {} EditTextIn = "" EditTextLim = "" NotifyFields = {NO, NO, NO} HelpContext = 1 [SecondDlgENG] Caption = $(FunctionTitle) Label1 = "Network &Speed:" Label2 = "Card &IRQ Level:" Combo1List = $(SpeedList) Combo1Out = $(Token1Speed) Combo2List = $(IRQList) Combo2Out = $(Token1IRQVal) DlgType = "RadioCombination" DlgTemplate = "NE2000" ComboListItemsIn = {Combo1List, Combo2List} ComboListItemsOut = {Combo1Out, Combo2Out} CBOptionsGreyed = {} EditTextIn = "" EditTextLim = "" NotifyFields = {NO, NO} HelpContext = $(!IDH_DB_OEMNADN2_INS) [Combo1Choices] Combo1_1 = "Auto", 0 Combo1_2 = "Primary", 2592 Combo1_3 = "Second", 2596Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.