;-------------------------------------------------------------- ; OEMSETUP FILE FOR TDK Network Flyer Fast Ethernet CardBus Card , v4.22 ; NDIS 4.0 - Windows NT 4.0 - ; ; Supported adapters: ; TDK Network Flyer 100 ;-------------------------------------------------------------- [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA "Jazz-Internal Bus" PCI [Options] DC21143 [ConnectionTypeChoicesDC21143] Connect_0 = "AutoSense", 0 Connect_1 = "10BaseT (TP) ", 2 Connect_2 = "10BaseT (TP) Full Duplex ", 3 Connect_3 = "10BaseT (TP) No_Link_Test", 4 Connect_4 = "100BaseTx (TP 100)", 8 Connect_5 = "100BaseTx (TP 100) Full Duplex", 9 ;Mike [IoBaseChoices] ;IO_0 = "Automatic",0 IO_1 = "0x500",1280 IO_2 = "0x1000",4096 IO_3 = "0x1200",4608 IO_4 = "0x1500",5376 IO_5 = "0x2000",8192 IO_6 = "0x4000",16384 IO_7 = "0x7000",28672 [InterruptChoices] ;IRQ_0 = "Automatic", 0 IRQ_1 = "3", 3 IRQ_2 = "4", 4 IRQ_3 = "5", 5 IRQ_4 = "7", 7 IRQ_5 = "9", 9 IRQ_6 = "10", 10 IRQ_7 = "11", 11 IRQ_8 = "12", 12 IRQ_9 = "13", 13 IRQ_10 = "14", 14 IRQ_11 = "15", 15 [StoreAndForwardChoices] StFd_0 = "Enabled" , 1 StFd_1 = "Disabled" , 0 ;Mike [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "DigitalEquipmentCorporation" ProductMajorVersion = "4" ProductMinorVersion = "22" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) VendorID = 4113 ;; 1011 (DEC) ProductSoftwareName = "TDKFLY" ProductSoftwareTitle = "TDK TDKFLY Adapter Driver" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\TDKFLYS.sys" NetRuleSoftwareType = "TDKFLYSys ndisDriver TDKFLYDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """TDKFLYSys"" yes no container" NetRuleSoftwareClass = {"TDKFLYDriver basic"} NetRuleSoftwareSWBindable = {"TDKFLYDriver TDKFLYERAdapter non exclusive 100"} ;OptionHelpFile = "TDKFLY.hlp" ProductHardwareName = "TDKFLY" StoreAndForward = 1 ;; Store_and_forward mode enabled TxmThreshold100 = 512 ;; 100Mbps default threshold ProductHardwareDC21143Title = "TDK Network Flyer 100" NetRuleHardwareDC21143Type = "TDKFLYER TDKFLYERAdapter" NetRuleHardwareDC21143Class = {"TDKFLYERAdapter basic"} AdapterDC21143Type = 5 ;; PCI board HelpDC21143Id = 50 DC21143CFID = 1642513 ;; 0x00191011 NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] set !DebugOutputControl = 0 read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set !DebugOutputControl = 0 ; Shradha ; ; determine whether the SrcDir already has a backslash at the ; end ; Debug-Output "<DBG: InstallOption: SrcDir = "$(SrcDir) split-string $(SrcDir) "\." SrcDirList QueryListSize SrcDirListSize $(SrcDirList) set SrcDirEnd = *($(SrcDirList), $(SrcDirListSize)) ifstr $(SrcDirEnd) != "\" set SrcDir = $(SrcDir)"\" endif Debug-Output "<DBG: InstallOption: new SrcDir = "$(SrcDir) ; setup environment read-syms SomeImportantVars ; Shradha set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants set NetRuleSoftwareBindable = $($R1) read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(Function$(Option)Title) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Debug-Output "<DBG: Begin> NTN_InstallMode = "$(!NTN_InstallMode) Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else-ifstr(i) $(Option) == "DE425" Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else set StartLabel = configureadapter endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ;Mike set IoBaseValue = *($(IoBaseList), $(DefaultIoBaseChoice)) set InterruptValue = *($(InterruptList), $(DefaultIrqChoice)) set ConnectionValue = *($(ConnectionList), 1) set StFdValue = *($(StFdList), 1) set EditTextIn = "1" ;Mike set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + Debug-Output "<DBG: installAdapter> OpenRegKey "$(ProductKeyName) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Debug-Output "<DBG: installAdapter> "$(ProductKeyName)" found !" CloseRegKey $(KeyProduct) Debug-Output "<DBG: installAdapter> NTN_RegBase = "$(!NTN_RegBase) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Debug-Output "<DBG: installAdapter> 1" Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto end else Debug-Output "<DBG: installAdapter> 2" Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif Debug-Output "<DBG: installAdapter> Setting OldVersionExisted" set OldVersionExisted = $(TRUE) endif Endif Debug-Output "<DBG: installAdapter> DoCopy "$(DoCopy) ; NT BUG_FIX Shradha Debug-Output "<DBG: installAdapter> Change DoCopy from "$(DoCopy)" to YES" set DoCopy = "YES" ifint $(UseFixedSrcDir) == 1 goto set_fixed_srcdir endif ; NT BUG_FIX Shradha ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) ;Shradha ; determine whether the SrcDir already has a backslash at the ; end Debug-Output "<DBG: installAdapter: SrcDir = "$(SrcDir) split-string $(SrcDir) "\" SrcDirList QueryListSize SrcDirListSize $(SrcDirList) set SrcDirEnd = *($(SrcDirList), $(SrcDirListSize)) ifstr $(SrcDirEnd) != "\" set SrcDir = $(SrcDir)"\" endif ; Shradha endif ; NT BUG_FIX Shradha set_fixed_srcdir = + ifint $(UseFixedSrcDir) == 1 Debug-Output "<DBG: installAdapter> changing SrcDir to "+ $(FixedSrcDir) set SrcDir = $(FixedSrcDir) endif ; NT BUG_FIX Shradha ifstr(i) $(DoCopy) == "YES" Debug-Output "<DBG: installAdapter: SrcDir before install-hlp "$(SrcDir) install "install-hlp" ; Shradha ; ----------------- now do the CSS detection bit Debug-Output "<DBG: installAdapter> Calling INF_Get_CSS_Name" LoadLibrary $(TDKSetupDiskName), $(!STF_WINDOWSSYSPATH)"\"$(CSSDLL) + IdentHandle LibraryProcedure ResultStr $(IdentHandle) INF_Get_CSS_Name FreeLibrary $(IdentHandle) Debug-Output "<DBG: installAdapter> ResultStr "$(ResultStr) Ifstr(i) $(ResultStr) != "Softex 187" ; ; The AbortIfPhoenixCSSNotFound variable ; will be set to 1 in the inf shipped with ; Softex/Phoenix 187 CSS ; ifint $(AbortIfPhoenixCSSNotFound) == 1 shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) + FATAL $(PhoenixCSSNotFoundMessage) set CommonStatus = STATUS_USERCANCEL goto end endif endif set CSSNone = 0 set CSS187 = 0 set CSSSoftex187 = 0 set CSSOther = 0 set doAbort = 0 Ifstr(i) $(ResultStr) == "Softex Cardbus Enabler" Debug-Output "<DBG: installAdapter> Softex Cardbus Enabler" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) WARNING + $(PreviousEnablerExistsMessage) ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "<DBG: installAdapter> Error $R0 "$($R0) set CommonStatus = STATUS_USERCANCEL goto end else-ifstr(i) $($R1) == "OK" Debug-Output "<DBG: installAdapter> OK" set CSSNone = 1 else-ifstr(i) $($R1) == "CANCEL" Debug-Output "<DBG: installAdapter> CANCEL" set CommonStatus = STATUS_USERCANCEL goto end endif else-ifstr(i) $(ResultStr) == "Softex 187" Debug-Output "<DBG: installAdapter> Softex 187" set CSS187 = 1 set CSSSoftex187 = 1 ifint $(AbortIfPhoenixCSSFound) == 1 set doAbort = 1 endif else-ifstr(i) $(ResultStr) == "Non Softex 187" Debug-Output "<DBG: installAdapter> Non Softex 187" set CSS187 = 1 ifint $(AbortIfCSSFound) == 1 set doAbort = 1 endif else-ifstr(i) $(ResultStr) == "SystemSoft CardWizard" Debug-Output "<DBG: installAdapter> systemSoft CardWizard" set CSSOther = 1 ifint $(AbortIfCSSFound) == 1 set doAbort = 1 endif else-ifstr(i) $(ResultStr) == "Other" Debug-Output "<DBG: installAdapter> other" set CSSOther = 1 ifint $(AbortIfCSSFound) == 1 set doAbort = 1 endif else-ifstr(i) $(ResultStr) == "None" set CSSNone = 1 Endif ifint $(doAbort) == 1 shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) + FATAL $(SomeCSSFoundMessage) set CommonStatus = STATUS_USERCANCEL goto end endif Ifint $(CSSOther) == 1 shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) + FATAL $(SomeCSSFoundMessage) set CommonStatus = STATUS_USERCANCEL goto end Endif Ifint $(CSSNone) == 1 Debug-Output "<DBG: installAdapter> AddCardbusEnabler" install "Install-RemoveCardbusEnabler" install "Install-AddCardbusEnabler" set CardbusEnablerInstalled = 1 Endif ; ; now copy the correct files ; we cannot rely on the old driver binaries that may ; be installed because the CSS may have changed on this ; machine since the last installation install "Install-AllFiles" ;Shradha endif Debug-Output "<DBG: installAdapter> goto installProduct" Goto installproduct configureadapter = + Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry Endif Endif Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "ConnectionType" set ConnectionIndex = $(ValueData) else-Ifstr(i) $(ValueName) == "IoBaseAddress" set IoBaseValueIndex = $(ValueData) Debug-Output "<DBG: ConfigureAdapter> IoBaseValueIndex in registry = "$(IoBaseValueIndex) else-ifstr(i) $(ValueName) == "InterruptNumber" set InterruptIndex = $(ValueData) Debug-Output "<DBG: ConfigureAdapter> InterruptIndex in registry = "$(InterruptIndex) else-ifstr(i) $(ValueName) == "StoreAndForward" set StFdIndex = $(ValueData) ;Shradha else-ifstr(i) $(ValueName) == "AdapterName" set OldAdapterName = $(ValueData) Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName) ;Shradha endif EndForListDo ; shradha ; ----------------- now do the CSS detection bit Debug-Output "<DBG: adapterOptions> Calling INF_Get_CSS_Name" LoadLibrary $(TDKSetupDiskName), $(!STF_WINDOWSSYSPATH)"\"$(CSSDLL) + IdentHandle LibraryProcedure ResultStr $(IdentHandle) INF_Get_CSS_Name FreeLibrary $(IdentHandle) Debug-Output "<DBG: adapterOptions> ResultStr "$(ResultStr) Ifstr(i) $(ResultStr) == "Softex Cardbus Enabler" set add_auto_options = 1 else-ifstr(i) $(ResultStr) == "Softex 187" set add_auto_options = 1 else set add_auto_options = 0 endif Debug-Output "<DBG: adapterOptions> IoBaseValue = "$(IoBaseValue) Debug-Output "<DBG: adapterOptions> InterruptValue = "$(InterruptValue) ifint $(add_auto_options) == 1 Debug-Output "<DBG: adapterOptions> Adding Auto" set IoBaseList = >($(IoBaseList), "Automatic") set IoBaseValues = >($(IoBaseValues), 0) set DefaultIoBaseChoice = 8 set IoBaseValue = *($(IoBaseList), $(DefaultIoBaseChoice)) Debug-Output "<DBG: adapterOptions> new IoBaseValue = "$(IoBaseValue) set InterruptList = >($(InterruptList), "Automatic") set InterruptValues = >($(InterruptValues), 0) set DefaultIrqChoice = 12 set InterruptValue = *($(InterruptList), $(DefaultIrqChoice)) Debug-Output "<DBG: adapterOptions> new InterruptValue = "$(InterruptValue) endif ; Shradha set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex))) ifstr(i) $(ConnectionValue) == "" set ConnectionValue = *($(ConnectionList), 2) endif ;Mike set IoBaseValue = *($(IoBaseList), ~($(IoBaseValues),$(IoBaseValueIndex))) Debug-Output "<DBG: ConfigureAdapter> IoBaseValue in registry = "$(IoBaseValue) ifstr(i) $(IoBaseValue) == "" set IoBaseValue = *($(IoBaseList), $(DefaultIoBaseChoice)) endif set InterruptValue = *($(InterruptList), + ~($(InterruptValues),$(InterruptIndex))) Debug-Output "<DBG: ConfigureAdapter> InterruptValue in registry = "$(InterruptValue) ifstr(i) $(InterruptValue) == "" set InterruptValue = *($(InterruptList), $(DefaultIRQChoice)) endif set StFdValue = *($(StFdList), ~($(StFdValues),$(StFdIndex))) Debug-Output "<DBG: ConfigureAdapter> StFdValue in registry = "$(StFdValue) ifstr(i) $(StFdValue) == "" set StFdValue = *($(StFdList), 1) endif ;Mike adapteroptions = + ifstr(i) $(Option) != "DE425" set from = adapteroptions read-syms FileDependentDlg$(!STF_LANGUAGE) ;; SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set ConnectionIndex = $(Combo1Out) ;Mike set IoBaseValueIndex = $(Combo2Out) set InterruptIndex = $(Combo3Out) set StFdIndex = $(Combo4Out) ;Mike ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else ui pop 1 goto end endif set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex))) ;Mike set IoBaseValue = *($(IoBaseValues), ~($(IoBaseList),$(IoBaseValueIndex))) set InterruptValue = *($(InterruptValues), + ~($(InterruptList),$(InterruptIndex))) set StFdValue = *($(StFdValues), ~($(StFdList),$(StFdIndex))) ;Mike ifstr(i) $(!NTN_InstallMode) == configure goto updateparameters endif endif installproduct =+ StartWait Debug-Output "<DBG: installproduct> Option = "$(Option) ifstr(i) $(Option) == "DE425" Debug-Output "<DBG: installproduct> Calling EISAFindBus" Shell $(UtilityInf), EISAFindBus, $($(Option)_1BYTE),$(EISA_MASK) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif set AdapterList = $($R1) else Debug-Output "<DBG: installproduct> Calling GetPCIInformation" set-div DeviceID = $($(Option)CFID) 65536 Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> GetPCIInformation error" goto ShellCodeError endif ; ifstr(i) $($R0) == {} ; set Error = $(CANNOT_FIND_ANY_CARD) ; set CommonStatus = USER_CANCEL ; set from = end ; goto nonfatal ; endif set AdapterList = $(Network_Flyer) ; set AdapterList = $($R0) endif Debug-Output "<DBG: installproduct> AdapterList "$(AdapterList) Debug-Output "<DBG: installproduct> OldVersionExisted "$(OldVersionExisted) ifint $(OldVersionExisted) == $(FALSE) ; NT BUG_FIX Shradha Debug-Output "<DBG: installproduct> Changing DoCopy "$(DoCopy)" to YES" set DoCopy = "YES" ifint $(UseFixedSrcDir) == 1 Debug-Output "<DBG: installproduct> Setting SrcDir to "$(FixedSrcDir) set SrcDir = $(FixedSrcDir) goto skip_src_dir endif ; NT BUG_FIX Shradha Debug-Output "<DBG: installproduct> DoCopy "$(DoCopy) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> DoAskSource error" Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Debug-Output "<DBG: installproduct> DoAskSource error 2" Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Debug-Output "<DBG: installproduct> DoAskSource user cancel" Goto successful Endif Set SrcDir = $($R1) Debug-Output "<DBG: installproduct> SrcDir "$(SrcDir) ;Shradha ; determine whether the SrcDir already has a backslash at the ; end Debug-Output "<DBG: installProduct: SrcDir = "$(SrcDir) split-string $(SrcDir) "\" SrcDirList QueryListSize SrcDirListSize $(SrcDirList) set SrcDirEnd = *($(SrcDirList), $(SrcDirListSize)) ifstr $(SrcDirEnd) != "\" set SrcDir = $(SrcDir)"\" endif ;Shradha Endif ; Shradha ;Debug-Output "<DBG: installproduct> Calling install-option" ;install "Install-Option" ; ;ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS ; Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; goto ShellCodeError ; endif ; set Error = $($R0) ; goto fatal ;endif ; Shradha ; NT BUG_FIX Shradha skip_src_dir = + ; NT BUG_FIX Shradha Debug-Output "<DBG: installproduct> AddSotwareComponent" Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> AddSotwareComponent err "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Debug-Output "<DBG: installproduct> RegistryErrorIndex "$(RegistryErrorIndex) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Debug-Output "<DBG: installproduct> AddValueList" Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> AddValueList err "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Debug-Output "<DBG: installproduct> RegistryErrorIndex "$(RegistryErrorIndex) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "<DBG: installproduct> AddValueList 2" Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> AddValueList 2 err "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Debug-Output "<DBG: installproduct> RegistryErrorIndex "$(RegistryErrorIndex) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif Debug-Output "<DBG: installproduct> before ForListDo "$(AdapterList) ForListDo $(AdapterList) set BusNum = *($($),1) set DeviceNum = *($($),2) set FunctionNum = *($($),3) Debug-Output "<DBG: installproduct> BusNum "$(BusNum) Debug-Output "<DBG: installproduct> DeviceNum "$(DeviceNum) Debug-Output "<DBG: installproduct> FunctionNum "$(FunctionNum) Debug-Output "<DBG: installproduct> Option "$(Option) ifstr(i) $(Option) == "DE425" Debug-Output "<DBG: installproduct> IsNetCardAlreadyInstalled " Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> IsNetCard err "$($ShellCode) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" Debug-Output "<DBG: installproduct> IsNetCard err 2 "$($R0) set Error = $($R0) goto fatal endif Debug-Output "<DBG: installproduct> R1 "$($R1) ifstr(i) $($R1) != "YES" Debug-Output "<DBG: installproduct> AddHwComponent" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) Debug-Output "<DBG: installproduct> R4 "$($R4) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), + $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> Err ShellCode "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Debug-Output "<DBG: installproduct> RegistryErrorIndex "$(RegistryErrorIndex) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Debug-Output "<DBG: installproduct> AddValueList 3" Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> AddValueList 3 err "$($ShellCode) goto ShellCodeError endif set BusTypeNum = 2 ;Shradha ifstr $(OldAdapterName) == "" Debug-Output "<DBG> setting OldAdapterName" set OldAdapterName = $(ProductHardwareName)$(AdapterNumber) endif Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName) ifint $(CSS187) == 1 ; since card may not be present ; when the driver starts, we ; cannot add AdapterCFID to the ; registry set CFIDValName = "SoftexCFID" else set CFIDValName = "AdapterCFID" endif Debug-Output "<DBG> CFIDValName = "$(CFIDValName) ;Shradha set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ ;Shradha {CardbusBridgeLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+ {CardbusBridgeCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+ {CardbusCardLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+ {CardbusCardCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+ {CardbusBridgeWritePosting,$(NoTitle),$(!REG_VT_DWORD),1},+ {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+ ;Shradha {$(CFIDValName),$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}} Debug-Output "<DBG: installproduct> AddValueList 4" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> AddValueList 4 err "$($ShellCode) goto ShellCodeError endif ;Shradha ifint $(CSSSoftex187) == 1 set NewValueList = {{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1}} Debug-Output "<DBG: installproduct> AddValueList 5" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> AddValueList 5 err "$($ShellCode) goto ShellCodeError endif endif ;Shradha set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "<DBG: installproduct> AddValueList 6" Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct> AddValueList 6 err "$($ShellCode) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) CloseRegKey $(HardParameterKey) endif else Debug-Output "<DBG: installproduct else> IsNetAlready ..." Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct else> IsNetAlready err "$($ShellCode) goto ShellCodeError endif Debug-Output "<DBG: installproduct else> R0 "$($R0) ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif Debug-Output "<DBG: installproduct else> R1 "$($R1) ifstr(i) $($R1) != "YES" ifstr(i) $(!STF_GUI_UNATTENDED) != "YES" ; Shradha ifint $(CSSSoftex187) == 1 set add_auto_options = 1 else-ifint $(CardbusEnablerInstalled) == 1 set add_auto_options = 1 else set add_auto_options = 0 endif ifint $(add_auto_options) == 1 Debug-Output "<DBG: installProduct> Adding Auto" Debug-Output "<DBG: installProduct> IoBaseValue = "$(IoBaseValue) set IoBaseList = >($(IoBaseList), "Automatic") set IoBaseValues = >($(IoBaseValues), 0) set DefaultIoBaseChoice = 8 set IoBaseValue = *($(IoBaseList), + $(DefaultIoBaseChoice)) Debug-Output "<DBG: installProduct> new IoBaseValue = "$(IoBaseValue) Debug-Output "<DBG: installProduct> InterruptValue = "$(InterruptValue) set InterruptList = >($(InterruptList), "Automatic") set InterruptValues = >($(InterruptValues), 0) set DefaultIrqChoice = 12 set InterruptValue = *($(InterruptList), + $(DefaultIrqChoice)) Debug-Output "<DBG: installProduct> new InterruptValue = "$(InterruptValue) endif ; Shradha read-syms FileDependentDlg$(!STF_LANGUAGE) ;; SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" Debug-Output "<DBG: installproduct Dlgevent CONTINUE" set ConnectionIndex = $(Combo1Out) ;Mike set IoBaseValueIndex = $(Combo2Out) set InterruptIndex = $(Combo3Out) set StFdIndex = $(Combo4Out) ;Mike ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" Debug-Output "<DBG: installproduct Dlgevent BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else Debug-Output "<DBG: installproduct Dlgevent "$(DLGEVENT) ui pop 1 goto end endif endif Debug-Output "<DBG: installproduct else> AddHwComp" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) Debug-Output "<DBG: installproduct else> R4 "$($R4) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Debug-Output "<DBG: installproduct else> RegistryErrorIndex "$(RegistryErrorIndex) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex))) ;Mike set IoBaseValue = *($(IoBaseValues), ~($(IoBaseList),$(IoBaseValueIndex))) set InterruptValue = *($(InterruptValues), + ~($(InterruptList),$(InterruptIndex))) set StFdValue = *($(StFdValues), ~($(StFdList),$(StFdIndex))) ;Mike Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Debug-Output "<DBG: installproduct else> AddValueList" Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode) goto ShellCodeError endif set BusTypeNum = 5 ;Shradha ifstr $(OldAdapterName) == "" Debug-Output "<DBG> setting OldAdapterName" set OldAdapterName = $(ProductHardwareName)$(AdapterNumber) endif Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName) ifint $(CSS187) == 1 set CFIDValName = "SoftexCFID" else set CFIDValName = "AdapterCFID" endif Debug-Output "<DBG> CFIDValName = "$(CFIDValName) ;Shradha set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ ;Shradha {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+ {CardbusBridgeLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+ {CardbusBridgeCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+ {CardbusCardLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+ {CardbusCardCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+ {CardbusBridgeWritePosting,$(NoTitle),$(!REG_VT_DWORD),1},+ ;Shradha {$(CFIDValName),$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}} Debug-Output "<DBG: installproduct else> AddValueList 2" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode) goto ShellCodeError endif ;Shradha ifint $(CSSSoftex187) == 1 Debug-Output "<DBG: installproduct else> writing SoftexPcmcia" set NewValueList = {{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ;Shradha ifint $($(Option)CFID) == $(DC21143CFID) set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+ {SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Debug-Output "<DBG: installproduct else> AddValueList Snooze" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode) goto ShellCodeError endif endif set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}} Debug-Output "<DBG: installproduct else> AddValueList ConnType " Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct else> err "$($ShellCode) goto ShellCodeError endif ;Shradha set NewValueList = { + {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseValue)} + {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptValue)} + ;Mike {StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StFdValue)}} ;Mike Debug-Output "<DBG: installproduct else> AddValueList iobase irq" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct else> err "$($ShellCode) goto ShellCodeError endif ;Shradha set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "<DBG: installproduct else> AddValueList bindform" Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG: installproduct else> err "$($ShellCode) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}} Debug-Output "<DBG: installproduct else> AddValueList busnum" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) CloseRegKey $(HardParameterKey) endif endif EndForListDo ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif EndWait Debug-Output "<DBG: installproduct else> goto successful" goto successful updateparameters =+ set HardParameterKey = $($R3) ;Mike set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex))) set IoBaseValue = *($(IoBaseValues), ~($(IoBaseList),$(IoBaseValueIndex))) set InterruptValue = *($(InterruptValues), + ~($(InterruptList),$(InterruptIndex))) set StFdValue = *($(StFdValues), ~($(StFdList),$(StFdIndex))) set NewValueList = {+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseValue)},+ {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptValue)},+ {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+ {StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StFdValue)} } ;Mike Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyParameters) goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Debug-Output "<DBG: removeAdapter> ProductKeyName "$(ProductKeyName) Debug-Output "<DBG: removeAdapter> NTN_RegBase "$(!NTN_RegBase) ; Shradha ; ----------------- now do the CSS detection bit Debug-Output "<DBG: removeAdapter> Calling INF_Get_CSS_Name" LoadLibrary $(TDKSetupDiskName), $(!STF_WINDOWSSYSPATH)"\"$(CSSDLL) + IdentHandle LibraryProcedure ResultStr $(IdentHandle) INF_Get_CSS_Name Debug-Output "<DBG: removeAdapter> ResultStr "$(ResultStr) set CSSNone = 0 set CSS187 = 0 set CSSSoftex187 = 0 set CSSOther = 0 set doAbort = 0 Ifstr(i) $(ResultStr) == "Softex Cardbus Enabler" Debug-Output "<DBG: removeAdapter> Softex Cardbus Enabler" Debug-Output "<DBG: removeAdapter> install-RemoveCardbusEnabler" install "install-RemoveCardbusEnabler" set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\SocketS.sys Debug-Output "<DBG: removeAdapter> INF_DeleteFile "$(ourFile) LibraryProcedure ResultStr $(IdentHandle) INF_DeleteFile $(ourFile) set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\CardS.sys Debug-Output "<DBG: removeAdapter> INF_DeleteFile "$(ourFile) LibraryProcedure ResultStr $(IdentHandle) INF_DeleteFile $(ourFile) set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\Enabler.sys Debug-Output "<DBG: removeAdapter> INF_DeleteFile "$(ourFile) LibraryProcedure ResultStr $(IdentHandle) INF_DeleteFile $(ourFile) Debug-Output "<DBG: removeAdapter> install-DecHalRefCount" install "install-DecHalRefCount" Endif Debug-Output "<DBG: removeAdapter> FreeLibrary "$(CSSDLL) FreeLibrary $(IdentHandle) ; Shradha Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "<DBG: removeAdapter> RemoveSoftwareComponent Manuf: "$(Manufacturer)" ProductSoftwareName: "$(ProductSoftwareName) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Debug-Output "<DBG: removeAdapter> RemoveHardwareComponent Manuf: "$(Manufacturer)" ProductSoftwareName: "$(ProductSoftwareName) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + ; Shradha Debug-Output "<DBG: term: CommonStatus "$(CommonStatus) Debug-Output "<DBG: term: NTN_InstallMode "$(!NTN_InstallMode) Ifstr(i) $(!NTN_InstallMode) != install goto final_term endif Debug-Output "<DBG: term>: CardbusEnablerInstalled "+ $(CardbusEnablerInstalled) ifint $(CardbusEnablerInstalled) != 1 goto final_term endif ; ; installation failed/succeeded after having installed cardbus ; enabler ; ifstr(i) $(CommonStatus) == "STATUS_SUCCESSFUL" Debug-Output "<DBG: term>: successful installation !" Debug-Output "<DBG: term>: install-IncHalRefCount" install "install-IncHalRefCount" goto final_term endif Debug-Output "<DBG: term>: Doing cleanup after error !" Debug-Output "<DBG: term> install-RemoveCardbusEnabler" install "install-RemoveCardbusEnabler" Debug-Output "<DBG: term> deleting files" LoadLibrary $(TDKSetupDiskName), + $(!STF_WINDOWSSYSPATH)"\"$(CSSDLL) IdentHandle set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\SocketS.sys LibraryProcedure ResultStr $(IdentHandle) + INF_DeleteFile $(ourFile) set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\CardS.sys LibraryProcedure ResultStr $(IdentHandle) + INF_DeleteFile $(ourFile) set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\Enabler.sys LibraryProcedure ResultStr $(IdentHandle) + INF_DeleteFile $(ourFile) FreeLibrary $(IdentHandle) final_term = + ; Shradha Return $(CommonStatus) [Install-Option] ; Shradha Exit ; Shradha set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit ;Shradha [Install-AllFiles] set STF_VITAL = "" Ifint $(CSS187) == 1 ifint $(AbortIfPhoenixCSSNotFound) == 1 set driverSrcDir = $(SrcDir) else set driverSrcDir = $(SrcDir)$(TdkDir)187 endif Else Ifint $(CSSOther) == 1 set driverSrcDir = $(SrcDir)$(TdkDir)other Else set driverSrcDir = $(SrcDir)$(TdkDir)point AddSectionFilesToCopyList Files-cbenabler + $(SrcDir)$(TdkDir)enabler $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-hal $(SrcDir)$(TdkDir)enabler + $(!STF_WINDOWSSYSPATH) EndIf Endif Debug-Output "<DBG: Option> driverSrcDir = "$(driverSrcDir) AddSectionFilesToCopyList Files-$(Option) $(driverSrcDir) + $(!STF_WINDOWSSYSPATH)\drivers ; Shradha set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit ;Shradha [Install-Hlp] set STF_VITAL = "" ; AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) ; Shradha AddSectionFilesToCopyList Files-CSSDLL $(SrcDir) $(!STF_WINDOWSSYSPATH) ;Shradha set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-AddCardbusEnabler] ; ; ; First setup the PCMCIA database ; ; set CBCardManufKey = $(PcmciaDbKey)"\"$(CBCardManufName) Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(CBCardManufKey) OpenRegKey $(!REG_H_LOCAL) "" $(CBCardManufKey) $(MAXIMUM_ALLOWED) + MyManufHandle Ifstr $(MyManufHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(CBCardManufKey)" failed" Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(PcmciaDbKey) OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDbKey) + $(MAXIMUM_ALLOWED) MyPcmciaKey Ifstr $(MyPcmciaKey) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(PcmciaDbKey)" failed" goto my_err_exit endif Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(CBCardManufName) CreateRegKey $(MyPcmciaKey) {$(CBCardManufName),0, + GenericClass} "" $(MAXIMUM_ALLOWED) "" MyManufHandle CloseRegKey $(MyPcmciaKey) endif Ifstr $(MyManufHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey failed "$(CBCardManufName) goto my_err_exit endif OpenRegKey $(MyManufHandle) "" $(CBCardProdName) $(MAXIMUM_ALLOWED) + MyProdHandle Ifstr $(MyProdHandle) == $(KeyNull) CreateRegKey $(MyManufHandle) {$(CBCardProdName),0, + GenericClass} "" $(MAXIMUM_ALLOWED) "" MyProdHandle endif CloseRegKey $(MyManufHandle) Ifstr $(MyProdHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey failed "$(CBCardProdName) goto my_err_exit endif SetRegValue $(MyProdHandle) + {Driver,$(NoTitle),$(!REG_VT_SZ),$(CBCardDriverName)} SetRegValue $(MyProdHandle) + {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"} CloseRegKey $(MyProdHandle) ; ; ; Open up services key ; ; set myKey = "SYSTEM\CurrentControlSet\Services" OpenRegKey $(!REG_H_LOCAL) "" $(myKey) $(MAXIMUM_ALLOWED) myKeyHandle Ifstr $(myKeyHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(myKey)" failed" Exit Endif ; ; ; Now install Sockets ; ; set subkey = "SocketS" ;set imgName = $(imgPath)"\"$(subkey)".sys" Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey) CreateRegKey $(myKeyHandle) {$(subkey),0,GenericClass} "" + $(MAXIMUM_ALLOWED) "" subKeyHandle Ifstr $(subKeyHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)" failed" CloseRegKey $(myKeyHandle) goto my_err_exit Endif SetRegValue $(subKeyHandle) {ErrorControl,$(NoTitle),$(!REG_VT_DWORD),1} SetRegValue $(subKeyHandle) {Group,$(NoTitle),$(!REG_VT_SZ),+ "System Bus Extender"} SetRegValue $(subKeyHandle) {Start,$(NoTitle),$(!REG_VT_DWORD),0} SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),1} SetRegValue $(subKeyHandle) {Type,$(NoTitle),$(!REG_VT_DWORD),1} CloseRegKey $(subKeyHandle) ; ; ; Now install CardS ; ; set subkey = "CardS" ;set imgName = $(imgPath)"\"$(subkey)".sys" Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey) CreateRegKey $(myKeyHandle) {$(subkey),0,GenericClass} "" + $(MAXIMUM_ALLOWED) "" subKeyHandle Ifstr $(subKeyHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)" failed" CloseRegKey $(myKeyHandle) goto my_err_exit Endif SetRegValue $(subKeyHandle) {ErrorControl,$(NoTitle),$(!REG_VT_DWORD),1} SetRegValue $(subKeyHandle) {Group,$(NoTitle),$(!REG_VT_SZ),+ "System Bus Extender"} SetRegValue $(subKeyHandle) {Start,$(NoTitle),$(!REG_VT_DWORD),0} SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),3} SetRegValue $(subKeyHandle) {Type,$(NoTitle),$(!REG_VT_DWORD),1} CloseRegKey $(subKeyHandle) ; ; ; Now install Enabler ; ; set subkey = "Enabler" ;set imgName = $(imgPath)"\"$(subkey)".sys" Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey) CreateRegKey $(myKeyHandle) {$(subkey),0,GenericClass} "" + $(MAXIMUM_ALLOWED) "" subKeyHandle Ifstr $(subKeyHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)" failed" CloseRegKey $(myKeyHandle) goto my_err_exit Endif SetRegValue $(subKeyHandle) {ErrorControl,$(NoTitle),$(!REG_VT_DWORD),1} SetRegValue $(subKeyHandle) {Group,$(NoTitle),$(!REG_VT_SZ),+ "System Bus Extender"} SetRegValue $(subKeyHandle) {Start,$(NoTitle),$(!REG_VT_DWORD),0} SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),4} SetRegValue $(subKeyHandle) {Type,$(NoTitle),$(!REG_VT_DWORD),1} CloseRegKey $(subKeyHandle) ; ; ; Update the tag for PCMCIA.sys ; ; set subkey = $(myKey)"\pcmcia" Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(subkey) OpenRegKey $(!REG_H_LOCAL) "" $(subkey) $(MAXIMUM_ALLOWED) subKeyHandle Ifstr $(subKeyHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(subkey)" failed" CloseRegKey $(myKeyHandle) goto my_err_exit Endif SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),2} CloseRegKey $(subKeyHandle) ; ; ; ; Close the Services key handle ; ; CloseRegKey $(myKeyHandle) ; ; ; Update the Group load order ; ; set myKey = "SYSTEM\CurrentControlSet\Control\GroupOrderList" Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(myKey) OpenRegKey $(!REG_H_LOCAL) "" $(myKey) $(MAXIMUM_ALLOWED) myKeyHandle Ifstr $(myKeyHandle) == $(KeyNull) Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(myKey)" failed" goto my_err_exit Endif Debug-Output "<DBG: AddCardbusEnabler> SetRegValue GroupOrderList in "$(myKey) SetRegValue $(myKeyHandle) + {"System Bus Extender",$(NoTitle),$(!REG_VT_BIN), {04, 00, 00, 00, 01, 00, 00, 00, 02, 00, 00, 00, 03, 00, 00, 00, 04, 00, 00, 00}} Debug-Output "<DBG: AddCardbusEnabler> CloseRegKey "$(myKey) CloseRegKey $(myKeyHandle) my_err_exit = + Exit [Install-RemoveCardbusEnabler] ; ; ; Open up services key ; ; set myKey = "SYSTEM\CurrentControlSet\Services" OpenRegKey $(!REG_H_LOCAL) "" $(myKey) $(MAXIMUM_ALLOWED) myKeyHandle Ifstr $(myKeyHandle) == $(KeyNull) Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(myKey)" failed" Exit Endif ; ; ; Now uninstall Sockets ; ; set subkey = "SocketS" Debug-Output "<DBG: RemoveCardbusEnabler> DeleteRegTree "$(myKey)"\"$(subkey) DeleteRegTree $(myKeyHandle) $(subkey) Debug-Output "<DBG: RemoveCardbusEnabler> RegLastError "$(RegLastError) ; ; ; Now uninstall CardS ; ; set subkey = "CardS" Debug-Output "<DBG: RemoveCardbusEnabler> DeleteRegTree "$(myKey)"\"$(subkey) DeleteRegTree $(myKeyHandle) $(subkey) Debug-Output "<DBG: RemoveCardbusEnabler> RegLastError "$(RegLastError) ; ; ; Now uninstall Enabler ; ; set subkey = "Enabler" Debug-Output "<DBG: RemoveCardbusEnabler> DeleteRegTree "$(myKey)"\"$(subkey) DeleteRegTree $(myKeyHandle) $(subkey) Debug-Output "<DBG: RemoveCardbusEnabler> RegLastError "$(RegLastError) ; ; ; Update the tag for PCMCIA.sys ; ; set subkey = $(myKey)"\pcmcia" Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(subkey) OpenRegKey $(!REG_H_LOCAL) "" $(subkey) $(MAXIMUM_ALLOWED) subKeyHandle Ifstr $(subKeyHandle) == $(KeyNull) Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(subkey)" failed" CloseRegKey $(myKeyHandle) goto my_err_exit2 Endif SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),1} Debug-Output "<DBG: RemoveCardbusEnabler> RegLastError "$(RegLastError) CloseRegKey $(subKeyHandle) ; ; ; ; Close the Services key handle ; ; CloseRegKey $(myKeyHandle) ; ; ; Update the Group load order back to what it should be ! ; ; set myKey = "SYSTEM\CurrentControlSet\Control\GroupOrderList" Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(myKey) OpenRegKey $(!REG_H_LOCAL) "" $(myKey) $(MAXIMUM_ALLOWED) myKeyHandle Ifstr $(myKeyHandle) == $(KeyNull) Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(myKey)" failed" goto err_exit Endif Debug-Output "<DBG: RemoveCardbusEnabler> SetRegValue GroupOrderList in "$(myKey) SetRegValue $(myKeyHandle) + {"System Bus Extender",$(NoTitle),$(!REG_VT_BIN), {01, 00, 00, 00, 01, 00, 00, 00}} Debug-Output "<DBG: RemoveCardbusEnabler> CloseRegKey "$(myKey) CloseRegKey $(myKeyHandle) my_err_exit2 = + Exit [Install-IncHalRefCount] Debug-Output "<DBG: IncHalRefCount> OpenRegKey "$(HalRefCountKey) OpenRegKey $(!REG_H_LOCAL) "" $(HalRefCountKey) $(MAXIMUM_ALLOWED) + HalRefCountKeyHandle Ifstr $(HalRefCountKeyHandle) == $(KeyNull) Debug-Output "<DBG: IncHalRefCount> OpenRegKey "$(HalRefCountKey)" failed" Debug-Output "<DBG: IncHalRefCount> OpenRegKey "$(SystemKey) OpenRegKey $(!REG_H_LOCAL) "" $(SystemKey) + $(MAXIMUM_ALLOWED) SystemKeyHandle Ifstr $(SystemKeyHandle) == $(KeyNull) Debug-Output "<DBG: IncHalRefCount> OpenRegKey "$(SystemKey)" failed" goto my_err_exit3 endif Debug-Output "<DBG: IncHalRefCount> CreateRegKey "$(HalRefCountKey) CreateRegKey $(SystemKeyHandle) {$(SetupKey),0, + GenericClass} "" $(MAXIMUM_ALLOWED) "" + HalRefCountKeyHandle CloseRegKey $(SystemKeyHandle) endif Ifstr $(HalRefCountKeyHandle) == $(KeyNull) Debug-Output "<DBG: IncHalRefCount> CreateRegKey failed "$(HalRefCountKey) goto my_err_exit3 endif Debug-Output "<DBG: IncHalRefCount> GetRegValue "$(HalRefCountValueName) GetRegValue $(HalRefCountKeyHandle) $(HalRefCountValueName) + HalRefCountValue ifint $(RegLastError) != 0 Debug-Output "<DBG: IncHalRefCount> RegLastError "$(RegLastError) set HalRefCount = 1 else Debug-Output "<DBG: IncHalRefCount> HalRefCountValue "$(HalRefCountValue) set HalRefCountValueType = *($(HalRefCountValue), 3) set HalRefCount = *($(HalRefCountValue), 4) Debug-Output "<DBG: IncHalRefCount> HalRefCountValueType "$(HalRefCountValueType) Debug-Output "<DBG: IncHalRefCount> curr HalRefCount "$(HalRefCount) ifint $(HalRefCountValueType) != $(!REG_VT_DWORD) Debug-Output "<DBG: IncHalRefCount> not DWORD !" set HalRefCount = 1 else set-add NewHalRefCount = $(HalRefCount), 1 set HalRefCount = $(NewHalRefCount) endif endif Debug-Output "<DBG: IncHalRefCount> SetRegValue HalRefCount = "$(HalRefCount) SetRegValue $(HalRefCountKeyHandle) {$(HalRefCountValueName),$(NoTitle),$(!REG_VT_DWORD),$(HalRefCount)} Debug-Output "<DBG: IncHalRefCount> RegLastError "$(RegLastError) Debug-Output "<DBG: IncHalRefCount> CloseRegKey" CloseRegKey $(HalRefCountKeyHandle) my_err_exit3 = + Exit [Install-DecHalRefCount] Debug-Output "<DBG: DecHalRefCount> OpenRegKey "$(HalRefCountKey) OpenRegKey $(!REG_H_LOCAL) "" $(HalRefCountKey) $(MAXIMUM_ALLOWED) + HalRefCountKeyHandle Ifstr $(HalRefCountKeyHandle) == $(KeyNull) Debug-Output "<DBG: DecHalRefCount> OpenRegKey failed "$(HalRefCountKey) goto my_err_exit4 endif Debug-Output "<DBG: DecHalRefCount> GetRegValue "$(HalRefCountValueName) GetRegValue $(HalRefCountKeyHandle) $(HalRefCountValueName) + HalRefCountValue ifint $(RegLastError) != 0 Debug-Output "<DBG: DecHalRefCount> RegLastError "$(RegLastError) goto my_err_exit4 endif Debug-Output "<DBG: DecHalRefCount> HalRefCountValue "$(HalRefCountValue) set HalRefCountValueType = *($(HalRefCountValue), 3) set HalRefCount = *($(HalRefCountValue), 4) Debug-Output "<DBG: DecHalRefCount> HalRefCountValueType "$(HalRefCountValueType) Debug-Output "<DBG: DecHalRefCount> curr HalRefCount "$(HalRefCount) ifint $(HalRefCountValueType) != $(!REG_VT_DWORD) Debug-Output "<DBG: DecHalRefCount> not DWORD !" goto my_err_exit4 endif ifint $(HalRefCount) > 1 set-sub NewHalRefCount = $(HalRefCount), 1 set HalRefCount = $(NewHalRefCount) Debug-Output "<DBG: DecHalRefCount> SetRegValue HalRefCount = "$(HalRefCount) SetRegValue $(HalRefCountKeyHandle) {$(HalRefCountValueName),$(NoTitle),$(!REG_VT_DWORD),$(HalRefCount)} Debug-Output "<DBG: DecHalRefCount> RegLastError "$(RegLastError) else Debug-Output "<DBG: DecHalRefCount> DeleteRegValue "$(HalRefCountValueName) DeleteRegValue $(HalRefCountKeyHandle) $(HalRefCountValueName) endif Debug-Output "<DBG: DecHalRefCount> CloseRegKey" CloseRegKey $(HalRefCountKeyHandle) my_err_exit4 = + Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ; AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 STF_PLATFORM = PPC STF_PLATFORM = Alpha [Files-Inf] 2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-DC21143] 1,TDKFLYS.SYS , SIZE=999 ;Shradha [Files-cbenabler] 1,SocketS.SYS , SIZE=999 1,CardS.SYS , SIZE=999 1,Enabler.SYS , SIZE=999 [Files-hal] 1,hal.dll , SIZE=999 , BACKUP=hal.nt [Files-CSSDLL] 1,DetectCS.dll , SIZE=999 ;Shradha ;[Files-Hlp] ;1,TDKFLY.HLP , SIZE=999 [LanguagesSupported] ENG [OptionsTextENG] DC21143 = "TDK Network Flyer 100" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ProductSoftwareDescription = "TDK TDKFLY Driver" FunctionDC21143Title = "TDK Network Flyer 100 Setup" ProductHardwareDC21143Description = "TDK Network Flyer 100" ConnectionList = ^(ConnectionTypeChoices$(Option), 1) ConnectionValues = ^(ConnectionTypeChoices$(Option), 2) ;Mike IoBaseList = ^(IoBaseChoices, 1) IoBaseValues = ^(IoBaseChoices, 2) InterruptList = ^(InterruptChoices, 1) InterruptValues = ^(InterruptChoices, 2) StFdList = ^(StoreAndForwardChoices, 1) StFdValues = ^(StoreAndForwardChoices, 2) ;Mike NoList = ^(NoChoices, 1) NoValues = ^(NoChoices, 2) ShellCodeErrorTitle = "Error: "$(Function$(Option)Title) ShellCodeErrorText = "Shell Code Error." CANNOT_FIND_ANY_CARD = "Network card is not present in the system" Network_Flyer = "{"{""21"",""0"",""0""}"}" [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] ;;ConnectionValue = *($(ConnectionList), 1) DlgText = "HELP is not available with this version." ;DlgText = "Choose the proper cable type for the "+ ; "network adapter. Select [Help] for a detailed "+ ; "description of the available options of the list." ;;DlgTemplate = "ADAP_PROTO_COMBO" ;;DlgType = "Combination" ;Mike DlgType = "RadioCombination" DlgTemplate = "EE_16" ;Mike Caption = $(Function$(Option)Title) Combo1Label = "Connection Type:" ;Mike Combo2Label = "I/O Base Address:" Combo3Label = "Interrupt Level:" Combo4Label = "Store And Forward:" ;Mike Combo1List = $(ConnectionList) Combo1Out = $(ConnectionValue) ;Mike Combo2List = $(IoBaseList) Combo2Out = $(IoBaseValue) Combo3List = $(InterruptList) Combo3Out = $(InterruptValue) Combo4List = $(StFdList) Combo4Out = $(StFdValue) ;Mike ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List} ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out} EditTextLim = "" CBOptionsGreyed = {} MinHelpId = 10 MaxHelpId = 1140 HelpContext = $(Help$(Option)Id) [SomeImportantVars] ; CBCardManufName = "TDK" CBCardProdName = "NetworkFlyer" CBCardDriverName = "TDKFly" PcmciaDbKey = "SYSTEM\CurrentControlSet\Services\Pcmcia\Database" TDKSetupDiskName = "TDK NetworkFlyer Setup Disk" CSSDLL = DetectCS.dll ; DefaultIoBaseChoice = 1 ;IoBase=0x500, see List of IoBaseChoices DefaultIrqChoice = 7 ;IRQ=11, see List of IrqChoices ; !G:DebugOutputControl = 0 CardbusEnablerInstalled = 0 ; PreviousEnablerExistsMessage = "A version of TDK Cardbus Enabler "+ "Software has been detected on "+ "your machine. Select OK to overwrite the version that is currently "+ "installed. If you select CANCEL, you must manually uninstall the "+ "software before installing this network adapter." ; SomeCSSFoundMessage = "Your machine has a Card and Socket "+ "Services installed. Please contact TDK Corporation for the network "+ "adapter driver that works with this Card and Socket Services" ; PhoenixCSSNotFoundMessage = "Your machine does not have the required "+ "Card and Socket Services installed. Please install the adapter after "+ "you have installed the Card and Socket Services." ; AbortIfCSSFound = 1 AbortIfPhoenixCSSFound = 0 ; ; ************************************************************** ; Change the following variables to 1 when distributing inf ; with Softex/Phoenix 187 CSS ; ************************************************************** AbortIfPhoenixCSSNotFound = 1 ; ; ************************************************************** ; Change the following variables to 0 when distributing inf ; with Softex/Phoenix 187 CSS ; ************************************************************** UseFixedSrcDir = 0 ; ; SystemKey = "SYSTEM" SetupKey = "Setup" HalRefCountValueName = "SoftexHalCount" HalRefCountKey = $(SystemKey)"\"$(SetupKey) ; FixedSrcDir = "a:\" TdkDir = "nt4.0\" ;Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.