OEMSETUP.INF Driver File Contents (R41119.EXE)

;***********************************************************************
;
;
;
;  SMC 8020 Adapter card and driver SETUP INF file.
;
;
;  Copyright (c) 1993  DWB Associates Inc.  All Rights Reserved
;
;
;  22 November 1994   D. Ebert BaseBand Technologies.
;                     Updates for NT 3.5.
;  13 January 1995    D. Ebert BaseBand Technologies.
;                     Updates for FEAST.
;  10 August  1995    D. Ebert BaseBand Technologies.
;                     Updates for PCMCIA.
;  22 February 1996   Patrick Pinzhong Liu
;                     Elisa Research Inc.
;                     Updates for both Multi-Function and single
;                     function Card
;  15 August 1996     John Rhodes
;                     Updates for the 8020BTM
;  17 October 1996    Vasantha Jagannath
;                     Updates for 8020BTM and BT
;  11 November 1996   Vasantha Jagannath
;                     Fixed PTRs for NT40
;
;***********************************************************************


[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    PCMCIA

[LanguagesSupported]
    ENG

[Options]
    SMC8020
    SMC8020M

[OptionsTextENG]
    SMC8020     = "SMC EtherEZ PC Card (SMC8020BT)"
    SMC8020M    = "SMC EtherEZ PC Card+Modem (SMC8020BTM)"

[Source Media Descriptions]
    1   = "SMC Driver Install Diskette"

[Files-SMC9000]
    1,SMC8020s.sys, SIZE=40000

[Files-Dll]
    1,SMC8020m.dll, SIZE=40000
    1,SMC8020m.hlp, SIZE=40000

;;[Files-SMCncdet]
;;    1, SMCncdet.dll, SIZE=40000

[Files-Inf]
    1, oemsetup.inf, SIZE=40000, RENAME=$(!UG_Filename)

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[FileConstants]
    UtilityInf      = "UTILITY.INF"
    ParamInf        = "NCPARAM.INF"
    SubroutnInf     = "SUBROUTN.INF"
    NetEventDLL     = "%SystemRoot%\System32\netevent.dll"



[RegistryConstantsSMC8020M]
    SoftwareType             = "driver"
    Manufacturer             = "SMC"
    ProductMajorVersion      = "3"
    ProductMinorVersion      = "5"
    ProductVersion           = $(ProductMajorVersion)"."$(ProductMinorVersion)
    ProductSoftwareName      = "SMC8020M"
    ProductSoftwareTitle     = "SMC8020 LAN/Modem Adapter Driver"
    ProductSoftwareImagePath = "\SystemRoot\System32\drivers\SMC8020s.sys"
    NetRuleSoftwareType      = "SMC9000Sys ndisDriver SMC9000Driver"
    NetRuleSoftwareUse       = $(SoftwareType)
    NetRuleSoftwareBindForm  = """SMC9000Sys"" yes no container"
    NetRuleSoftwareClass     = {"SMC9000Driver basic"}
    NetRuleSoftwareBindable  = {"SMC9000Driver SMC8020MAdapter non exclusive 100"}
    ProductHardwareName      = "SMC8020M"
    ProductHardwareTitle     = "SMC 8020 LAN/Modem Adapter"
    NetRuleHardwareType      = "SMC8020M SMC8020MAdapter"
    NetRuleHardwareBindForm  = " yes yes container"
    NetRuleHardwareClass     = {"SMC8020MAdapter basic"}
    ProductKeyName           = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
    ParamKeyName             = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
    ProductSoftwareDescription = "SMC EtherEZ PC Card+Modem (SMC8020BTM) Adapter Driver"
    ProductHardwareDescription = "SMC EtherEZ PC Card+Modem (SMC8020BTM) Adapter"
;Combo++
    ;
    ;Modem Registry paths
    ;
    SerialCommPath      = "\\HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM"
    PortsPath           = "\\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports"
    EtherEZModemPath    = "\\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Serial\Parameters\EtherEZModem"
    PCMCIAPCCARDsPath   = "\\HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\MultifunctionAdapter\PCMCIA PCCARDs"

;Combo--

[RegistryConstantsSMC8020]
    SoftwareType             = "driver"
    Manufacturer             = "SMC"
    ProductMajorVersion      = "3"
    ProductMinorVersion      = "5"
    ProductVersion           = $(ProductMajorVersion)"."$(ProductMinorVersion)
    ProductSoftwareName      = "SMC8020"
    ProductSoftwareTitle     = "SMC8020 PCMCIA Adapter Driver"
    ProductSoftwareImagePath = "\SystemRoot\System32\drivers\SMC8020s.sys"
    NetRuleSoftwareType      = "SMC9000Sys ndisDriver SMC9000Driver"
    NetRuleSoftwareUse       = $(SoftwareType)
    NetRuleSoftwareBindForm  = """SMC9000Sys"" yes no container"
    NetRuleSoftwareClass     = {"SMC9000Driver basic"}
    NetRuleSoftwareBindable  = {"SMC9000Driver SMC8020Adapter non exclusive 100"}
    ProductHardwareName      = "SMC8020"
    ProductHardwareTitle     = "SMC 8020 PC Card Adapter"
    NetRuleHardwareType      = "SMC8020 SMC8020Adapter"
    NetRuleHardwareBindForm  = " yes yes container"
    NetRuleHardwareClass     = {"SMC8020Adapter basic"}
    ProductKeyName           = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
    ParamKeyName             = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
    ProductSoftwareDescription = "SMC EtherEZ PC Card (SMC8020BT) Adapter Driver"
    ProductHardwareDescription = "SMC EtherEZ PC Card (SMC8020BT) Adapter"

[GeneralConstants]
    KeyNull            = ""
    MAXIMUM_ALLOWED    = 33554432
    KeyProduct         = ""
    KeyParameters      = ""

;; nishi
    AdapterName        = ""
;; nishi

    PcmciaKey          = ""
    SMCPcmciaKey       = ""
    SMC8020mKey        = ""
    NoTitle            = 0
    OldVersionExisted  = FALSE
    DriverPath         = $(!STF_NTPATH)\drivers
    MyList = {.}
;;     MyList = {hex(9)}


[PcmciaKeysSMC8020M]
    CardManufacturer   = "SMC"
    CardKeyName        = "EtherEZ Ethernet/Modem 8020"
    PcmciaPath         = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
    SMCPcmciaPath      = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(CardManufacturer)
    SMC8020Path        = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(CardManufacturer)"\"$(CardKeyName)


[PcmciaKeys]
    CardManufacturer   = "SMC"
    CardKeyName        = "EtherEZ Ethernet 8020"
    PcmciaPath         = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
    SMCPcmciaPath      = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(CardManufacturer)
    SMC8020Path        = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(CardManufacturer)"\"$(CardKeyName)


[FileConstantsENG]
    ProCaption                 = "Windows NT Setup"
    ProCancel                  = "Cancel"
    ProCancelMsg               = "The "$(Option)" Adapter is not correctly installed.  "+
                                 "Are you sure you want to cancel copying files?"

    ProCancelCap               = "Network Setup Message"
    ProText1                   = "Copying:"
    ProText2                   = "To:"
    FunctionTitle              = $(Option)" Ethernet Adapter Card Setup"

[SMCIrqs]
;; nishi
    IRQ12 = "Auto",0
;; nishi

    IRQ0  = "5",5
    IRQ1  = "3",3
    IRQ2  = "4",4
    IRQ3  = "6",6
    IRQ4  = "7",7
    IRQ5  = "9",9
    IRQ6  = "10",10
    IRQ7  = "11",11
    IRQ8  = "12",12
    IRQ9  = "13",13
    IRQ10 = "14",14
    IRQ11 = "15",15

[SMCIoBase]
;; nishi
    Base16 = "Auto",0x0000
;; nishi
    Base0  = "0x300",0x0300
    Base1  = "0x200",0x0200
    Base2  = "0x220",0x0220
    Base3  = "0x240",0x0240
    Base4  = "0x260",0x0260
    Base5  = "0x280",0x0280
    Base6  = "0x2A0",0x02A0
    Base7  = "0x2C0",0x02C0
    Base8  = "0x2E0",0x02E0
    Base9  = "0x320",0x0320
    Base10 = "0x340",0x0340
    Base11 = "0x360",0x0360
    Base12 = "0x380",0x0380
    Base13 = "0x3A0",0x03A0
    Base14 = "0x3C0",0x03C0
    Base15 = "0x3E0",0x03E0

[SMCMedia]
    Media0 = "AutoDetect"
    Media1 = "10BaseT"
    Media2 = "BNC"

[SMCSpeed]
    Speed0 = 100
    Speed1 = 10

[HexDigits]
    Hex0 = 0
    Hex1 = 1
    Hex2 = 2
    Hex3 = 3
    Hex4 = 4
    Hex5 = 5
    Hex6 = 6
    Hex7 = 7
    Hex8 = 8
    Hex9 = 9
    HexA = A
    HexB = B
    HexC = C
    HexD = D
    HexE = E
    HexF = F

;;Combo++

[ModemPortChoices]
    Port_1 = "COM3", 3
    Port_2 = "COM2", 2
    Port_3 = "COM1", 1
    Port_4 = "COM4", 4

[AttributeMemChoices]
;; nishi
    Add_9 = "Auto",000000
    Add_1 = "0xD0000",851968
    Add_2 = "0xC0000",786432
    Add_3 = "0xC4000",802816
    Add_4 = "0xC8000",819200
    Add_5 = "0xCC000",835586
    Add_6 = "0xD4000",868352
    Add_7 = "0xD8000",884736
    Add_8 = "0xDC000",901120

[ModemIOBaseChoices]
    MBase0  = "0x3E8",0x03E8
    MBase1  = "0x2E8",0x02E8
    MBase2  = "0x2F8",0x02F8
    MBase3  = "0x3F8",0x03F8

[ModemIrqChoices]
    IRQ0  = "5",5
    IRQ1  = "3",3
    IRQ2  = "4",4

;;Combo--

[DialogConstantsENG]
    Help             = "&Help"
    Exit             = "Cancel"
    OK               = "OK"
    ContextSMC8020M  = 30100
    ContextLanMod    = 30100
    HelpContext      = $(Context$(Option))
    Continue         = "Continue"
    Cancel           = "Cancel"
    BadAddr1         = "Network Address must be 12 hexadecimal digits"
    BadAddr2         = "Network Address contains invalid hexadecimal digit: "
    BadAddr3         = "Network Address invalid, group bit must be 0"

[FileDependentDlgENG]
    DlgType           = "RadioCombination"
    DlgTemplate       = $(Option)

;;Combo++
    Function          = "Function &Select"
    LAN               = "&LAN Only"
    MODEM             = "&Modem Only"
    LANMODEM          = "&LAN/Modem"

    LANCaption      =   "SMC EtherEZ PC LAN Card (SMC8020BTM) Setup"

    ModemCaption    =   "SMC EtherEZ PC Modem (SMC8020BTM) Setup"

    MultiCaption    =   "SMC EtherEZ PC Card+Modem (SMC8020BTM) Setup"

    CaptionSMC8020    = "SMC EtherEZ PC Card (SMC8020BT) Setup"

    CaptionSMC8020M   = "SMC EtherEZ PC Card+Modem (SMC8020BTM) Setup"

;;Combo--
    Caption           = $(Caption$(Option))

    Combo1Label       = "&IRQ Level:"
    Combo2Label       = "I/O &Base:"
    Combo3Label       = "&Media Type:"
;;Combo++
    Combo4Label       = "Modem &Port:"
    Combo5Label       = "Modem IR&Q:"
    Combo6Label       = "Modem I/&O:"
    Combo7Label       = "&Attribute Mem:"
;;Combo--

    Label3            = "&Network Address:"
    AdapterSpeed      = "&Adapter Speed"
    HighSpeed         = "High Speed [100mb]"
    LowSpeed          = "Low Speed [10mb]"
    IrqList           = ^(SMCIrqs, 1)
    IoBaseList        = ^(SMCIoBase, 1)
    MediaList         = ^(SMCMedia, 1)
    SpeedValue        = ^(SMCSpeed, 1)
    MediaTypeValue    = 0
    Combo1List        = $(IrqList)
    Combo1Out         = $(IRQLevel)
    Combo2List        = $(IoBaseList)
    Combo2Out         = $(IOBaseAddress)
    Combo3List        = $(MediaList)
    Combo3Out         = $(Media)
;;Combo++

    AttributeMemList  = ^(AttributeMemChoices, 1)
    ModemIOBaseList   = ^(ModemIoBaseChoices, 1)
    ModemPortList     = ^(ModemPortChoices, 1)
    ModemIrqList      = ^(ModemIrqChoices, 1)

    Combo7List      = $(AttributeMemList)
    Combo7Out       = *($(AttributeMemList), 5)

    ; Modem

    ModemPortValues     = ^(ModemPortChoices,2)

    Combo4List      = $(ModemPortList)
    Combo4Out       = *($(ModemPortList), 3)

    Combo5List      = $(ModemIrqList)
    Combo5Out       = *($(ModemIrqList), 2)

    Combo6List      = $(ModemIOBaseList)        2
    Combo6Out       = *($(ModemIOBaseList), 3)

    ComboListItemsIn  = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List, Combo6List, Combo7List}
    ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out, Combo6Out, Combo7Out}

;;Combo--

    CBOptionsGreyed   = {}
    RCCtlFocusOn      = 403

[Identify]
    read-syms Identification
    shell "" DebugControl

    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    shell "" DebugControl

    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
      ifstr(i) $($0) == ""
        set Status = STATUS_NOLANGUAGE
        goto ExitReturnOptions
      endif
    else
      set Status = STATUS_NOLANGUAGE
      goto ExitReturnOptions
    endif

    set PlatformList = ^(PlatformsSupported, 1)
    Ifcontains(i) $($1) NOT-IN $(PlatformList)
      ifstr(i) $($1) != ""
        set Status = STATUS_NOTSUPPORTED
      endif
    endif

ExitReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    read-syms GeneralConstants
    read-syms FileConstants
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    read-syms DialogConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)

    shell "" DebugControl
    StartWait

    read-syms RegistryConstants$(Option)

    set LanguageList = ^(LanguagesSupported, 1)

    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set SubFunction = RemoveAdapter
    else-Ifstr(i) $(!NTN_InstallMode) == install
        set SubFunction = InstallAdapter
    else-Ifstr(i) $(!NTN_InstallMode) == update
        set SubFunction = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set SubFunction = ConfigureAdapter
    else
        set SubFunction = NoWay
    endif

    Shell "" $(SubFunction)
    EndWait
    return $($R0)

[InstallAdapter]
    read-syms GeneralConstants
    read-syms FileConstants
    detect date

    set CurrentTime = *($(Now),1)
    set SrcDir      = $(!p:SrcDir)
    set Option      = $(!p:Option)
    set DoCopy      = $(!p:DoCopy)
    set AddCopy     = $(!p:AddCopy)
    set KeyProduct  = $(KeyNull)
    set DoSetup     = TRUE

    read-syms RegistryConstants$(Option)
       Debug-Output " VAS  "$(Option)
    Debug-Output "nishi: IrqList = $(Combo1List)"
    Debug-Output "nishi: IoBaseAddressList = $(Combo2List)"
    Debug-Output "nishi: AttributeMemList = $(Combo7List)"

    Debug-Output "STC_NCDETECT  = "$(!STF_NCDETECT)
    Debug-Output "STF_NCDETCARD = "$(!STF_NCDETCARD)
    Debug-Output "STF_NCOPTION = "$(!STF_NCOPTION)

    Set DetectedCard = FALSE
;;    Ifstr(i) $(!STF_NCDETECT) == YES
;;      Ifstr(i) $(!STF_NCOPTION) == $(Option)
;;         Set DetectedCard = TRUE
;;      Endif
;;    Endif
;;
;;    IfStr(i) $(DetectedCard) == FALSE
;;      Shell "" PrepareDetectionDll "SMCncdet.dll"
;;    Endif

;;    IfStr(i) $(Option) == "SMC8020m"
        Set PCMCIA = 1
;;    Else
;;      Set PCMCIA = 0
;;    EndIf

;;    ifstr(i) $(Option) == "SMC9000"
;;      Set TypeList = {{IRQ,IRQ_List,IRQLevel},+
;;                      {IOADDR, IOBaseAddressDecList, IOBaseValue},+
;;                      {TRANSCEIVER, MediaList, MediaTypeValue}}
;;    else-ifstr(i) $(Option) == "SMC8020m"
        Set TypeList = {{IRQ,IRQ_List,IRQLevel},+
                        {IOADDR, IOBaseAddressDecList, IOBaseValue},+
                        {TRANSCEIVER, MediaList, MediaTypeValue}}
;;    else
;;      Set TypeList = {{IRQ,IRQ_List,IRQLevel},+
;;                      {IOADDR, IOBaseAddressDecList, IOBaseValue},+
;;                      {TRANSCEIVER, MediaList, MediaTypeValue}, +
;;                      {SPEED, SpeedList, SpeedValue}}
;;    endif
;;
;;    Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
;;    Set Status = $($R0)
;;
;;    ifstr(i) $(Status) != STATUS_SUCCESSFUL
;;      Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
;;      Shell "" FatalError $($R0)
;;      Return STATUS_FAILED
;;    Endif
;;
;;    Shell $(ParamInf) Param_SetDefaults {}
;;
    set OldVersionExisted = FALSE
      Debug-Output " VAS "$(ProductKeyName)
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
            Debug-Output " VAS1  "
        ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
            Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), +
                $(ProductVersion)
            ifstr(i) $($R1) != "OK"
                Return STATUS_FAILED
            endif
        else
            Shell $(UtilityInf), CardExistedDlg
            ifstr(i) $($R1) != "OK"
                Return STATUS_FAILED
            endif
            set OldVersionExisted = TRUE
        endif
    endif

;;    IfStr(i) $(DetectedCard) == TRUE
;;      shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
;;      ifstr(i) $($R0) == STATUS_SUCCESSFUL
;;          set DetectedParams = $($R1)
;;          shell $(ParamInf) Param_SetDefaults $(DetectedParams)
;;      else
;;              Debug-Output "Param_QueryCard Failed, status = "$($R0)
;;      endif
;;    endif

    IfStr(i) $(DoSetup) == TRUE
        set NetworkAddress  = ""

        ifint $(MediaTypeValue) == 0
            set MediaValue = "AutoDetect"
        else
            set MediaValue = "10BaseT"
        endif

      Debug-Output "1 VASANTHA Install Adapter "$(SrcDir)
      Debug-Output "2 VASANTHA Install Adapter STF_CDIRW "$(!STF_CWDDIR)
        set DLLPATH = ""
   ;     ifstr(i) $(DoCopy) == "YES"
            OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
            Ifstr $(KeyProduct) != $(KeyNull)
                CloseRegKey $(KeyProduct)
                set DLLPATH = $(!STF_CWDDIR)
                Debug-Output "3 VASANTHA DoCopy "$(!STF_CWDDIR)
            else
                set BuiltIn = "YES"
                ifstr(i) $(!NTN_Origination) == "NCPA"
                    Set BuiltIn = "NO"
                endif
                Shell $(UtilityInf) DoAskSource $(!STF_CWDDIR) $(SrcDir) $(BuiltIn)
                Debug-Output "4 VASANTHA Install Adapter SrcDir"$(SrcDir)
                Debug-Output "5 VASANTHA Install Adapter DLLPATH "$($R1)
                Debug-Output "6 VASANTHA Install Adapter SrcDir"$($R1)
                set DLLPATH = $($R1)
                set SrcDir  = $($R1)
            endif
    ;    endif

dowind =+

;;Combo++

        set AttributeMem = 0
        set ModemIOBase = 0
        set ModemIrq = 0
        set ModemPort = 0

        set Function      = 3

;;Combo--

        Shell "" AdapterSetup
        IfStr(i) $($R0) != TRUE
            Return STATUS_USERCANCEL
        endif

        ifstr(i) $(MediaValue) == "AutoDetect"
            set MediaTypeValue = 0
        else-ifstr(i) $(MediaValue) == "10BaseT"
            set MediaTypeValue = 1
        endif

;;      Shell $(ParamInf) Param_SaveValues
;;      Set NewParamSettings = $($R0)

;;      Shell $(ParamInf) Param_VerifyResources $(NewParamSettings)
;;        Ifstr(i) $($R0) != STATUS_SUCCESSFUL
;;            Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
;;            Shell "" VerifyError $($R0)
;;            ifstr(i) $($R0) != "OK"
;;                goto dowind
;;            endif
;;        endif

        IfStr(i) $(OldVersionExisted) == FALSE
            Shell "" SetCopy $(DoCopy) $(AddCopy) $(SrcDir) "Install-Option"
            IfStr(i) $($R0) == TRUE
                Shell "" SetSoftware $(CurrentTime)
                IfStr(i) $($R0) != TRUE
                    Return STATUS_FAILED
                endif
            endif
        endif

         Debug-Output "ProductHardwareName "$(ProductHardwareName)
         Debug-Output "CONTEXTINF NAME "$(STF_CONTEXTINFNAME)
         Debug-Output "ProductKeyName "$(ProductKeyName)
         Debug-Output " VAS  "$(Option)
         Debug-Output " vas "$(!p:Option)

        Shell "" SetHardware $(CurrentTime)


        IfStr(i) $($R0) == TRUE
            Shell "" WriteParameters
            Debug-Output " VAS "WriteParameters
        endif
    endif
 ifstr(i) $(Option) == "SMC8020M"
    Shell "" SetUpMulti
 endif

    IfStr(i) $($R0) == TRUE
        Return STATUS_SUCCESSFUL
    else
        Return STATUS_FAILED
    endif


[ConfigureAdapter]
    set Option = $(!p:Option)

    read-syms GeneralConstants
    read-syms FileConstants
    read-syms FileDependentDlg$(!STF_LANGUAGE)


    Debug-Output "7 VASANTHA Configure Adapter "$(!STF_CWDIR)
    set DLLPATH = $(!STF_CWDDIR)

    read-syms RegistryConstants$(Option)

    ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
        Shell $(UtilityInf) RegistryErrorString CANNOT_CONFIGURE_SOFTWARE
        Shell "" ShellError $($R0)
        Return STATUS_FAILED
    endif

;;   Set DetectedCard = FALSE
;;    Set TypeList = {{IRQ,IRQ_List,IRQLevel},+
;;                  {IOADDR, IOBaseAddressDecList, IOBaseValue},+
;;                  {TRANSCEIVER, MediaList, MediaTypeValue}}
;;    Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
;;
;;    ifstr(i) $($R0) != STATUS_SUCCESSFUL
;;      Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
;;      Shell "" FatalError $($R0)
;;      Return STATUS_FAILED
;;    Endif
;;
;;    Ifstr(i) $(!STF_NCDETECT) == YES
;;      Ifstr(i) $(!STF_NCOPTION) == $(Option)
;;         Set DetectedCard = TRUE
;;      Endif
;;    Endif

    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) == $(KeyNull)
        Shell $(UtilityInf) RegistryErrorString CANNOT_FIND_COMPONENT_SERVICE
        Shell "" ShellError $($R0)
        Return STATUS_FAILED
    endif

    Shell $(UtilityInf) FindService, $(KeyProduct)

    Ifstr(i) $($R0) != NO_ERROR
        Shell $(UtilityInf) RegistryErrorString $($R0)
        Shell "" ShellError $($R0)
        Return STATUS_FAILED
    endif

    Set !KeyParameters = $($R2)
    CloseRegKey $($R1)

    Ifstr $(!KeyParameters) == $(KeyNull)
        Shell $(UtilityInf) RegistryErrorString CANNOT_FIND_COMPONENT_SERVICE
        Shell "" FatalError $($R0)
        Return STATUS_FAILED
    endif

    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}

    EnumRegValue $(!KeyParameters) ValueList
    set NetworkAddress = ""
    set PCMCIA = 0

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "Transceiver"
            set MediaValue = $(ValueData)
        else-ifstr(i) $(ValueName) == "Interrupt"
            set IRQLevel = $(ValueData)
        else-ifstr(i) $(ValueName) == "IoBase"
            set IOBaseValue = $(ValueData)
        else-ifstr(i) $(ValueName) == "Speed"
            set SpeedValue = $(ValueData)
        else-ifstr(i) $(ValueName) == "NetworkAddress"
            set NetworkAddress = $(ValueData)
        else-ifstr(i) $(ValueName) == "PCMCIA"
            set PCMCIA = $(ValueData)
        else-ifstr(i) $(ValueName) == "SoftexPcmcia"
            set PCMCIA = $(ValueData)
; nishi
        else-ifstr(i) $(ValueName) == "AdapterName"
            set !AdapterName = $(ValueData)
; nishi
;;Combo++
                else-ifstr(i) $(ValueName) == "Function"
                    set Function = $(ValueData)
                else-ifstr(i) $(ValueName) == "COMIRQNumber"
                    set ModemIrq = $(ValueData)
                else-ifstr(i) $(ValueName) == "COMIOBase"
                    set ModemIOBase = $(ValueData)
                else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
                    set AttributeMem = $(ValueData)
                else-ifstr(i) $(ValueName) == "COMPort"
                    set ModemPort = $(ValueData)
;;Combo--

        endif
    EndForListDo

    ifstr(i) $(MediaValue) == "10BaseT"
        set MediaTypeValue = 0
    else-ifstr(i) $(MediaValue) == "BNC"
        set MediaTypeValue = 1
    endif

winagn =+
    Shell "" AdapterSetup
    IfStr(i) $($R0) != TRUE
        Return STATUS_USERCANCEL
    endif

    ifstr(i) $(MediaValue) == "10BaseT"
        set MediaTypeValue = 0
    else-ifstr(i) $(MediaValue) == "BNC"
        set MediaTypeValue = 1
    endif

    Shell "" WriteParameters

    IfStr(i) $($R0) == TRUE
        Return STATUS_SUCCESSFUL
    else
        Return STATUS_FAILED
    endif

[NoWay]
    read-syms GeneralConstants
    Shell "" ShellError "NoWay"
    Return STATUS_FAILED

[RemoveAdapter]
;

    read-syms GeneralConstants
    read-syms FileConstants

    set Option = $(!p:Option)

;Combo++

    ifstr(i) $(Option) == "SMC8020M"
        read-syms CustomMessageDlg
        ui start "CustomMessageBox"
        ui pop 1
    endif

;;Combo--
    read-syms RegistryConstants$(Option)

        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)

        ifstr(i) $($R0) != NO_ERROR
            Shell $(UtilityInf) RegistryErrorString $($R0)
            Shell "" ShellError $($R0)
            Return STATUS_FAILURE
        endif

;;Combo++

          ; Remove Software Component

          Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                $(ProductSoftwareName)

           ifstr(i) $($R0) != NO_ERROR
                Shell $(UtilityInf) RegistryErrorString $($R0)
                Shell "" ShellError $($R0)
                Return STATUS_FAILURE
    endif
    ;
    ; Remove Modem from the Registry
    ;
    ifstr(i) $(Option) == "SMC8020M"
                  OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) MyNewSerialHandle
                  DeleteRegTree $(MyNewSerialHandle) "EtherEZEthernetModem"
                  CloseRegKey $(MyNewSerialHandle)

                  OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) MyNewSerialHandle
                  DeleteRegValue $(MyNewSerialHandle) "EtherEZEthernetModem"
                  CloseRegKey $(MyNewSerialHandle)
    endif
;;Combo--
    Return STATUS_SUCCESSFUL


[UpgradeSoftware]
    read-syms GeneralConstants

    set SrcDir      = $(!p:SrcDir)
    set Option      = $(!p:Option)

    read-syms RegistryConstants$(Option)

    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Return STATUS_FAILED
        endif

        set DoCopy  = YES
        set AddCopy = YES
        Shell "" SetCopy $(DoCopy) $(AddCopy) $(SrcDir) "Install-Update"

        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetworkCardKey
        Ifstr(i) $(NetworkCardKey) == $(KeyNull)
            Return STATUS_FAILED
        endif

        GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
        set ServiceName = *($(ServiceNameInfo), 4)

        OpenRegKey $(NetworkCardKey) "" "NetRules" $(MAXIMUM_ALLOWED) NetRuleKey
        Ifstr(i) $(NetRuleKey) == $(KeyNull)
            Return STATUS_FAILED
        endif

        CloseRegKey $(NetRules)
        CloseRegKey $(NetworkCardKey)

        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName) $(MAXIMUM_ALLOWED) ServiceKey
        Ifstr(i) $(ServiceKey) == $(KeyNull)
            Return STATUS_FAILED
        endif

        CloseRegKey $(ServiceKey)
    endif

    Return STATUS_SUCCESSFUL

[AdapterSetup]
    set Option = $(!p:Option)

    Debug-Output "<DBG: FORCE> ******************************** "
    Debug-Output "<DBG: FORCE> *********** Starting AdapterSetup"

    read-syms FileDependentDlg$(!STF_LANGUAGE)
    read-syms DialogConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms RegistryConstants$(Option)

    ; -------------------------- BEGIN FORCE FIX - SHRADHA

    ; Update the modem info by reading from the ZZZx
    ; entries under the Serial\Parameters in registry

    Debug-Output "<DBG: FORCE> Starting ModemIOBaseList = "$(ModemIOBaseList)
    Debug-Output "<DBG: FORCE> Starting ModemIrqList = "$(ModemIrqList)

    set SerParams = "SYSTEM\CurrentControlSet\Services\Serial\Parameters"

    set ZZZComPort = $(SerParams)"\ZZZa"
    install "install-update-modem-info"

    set ZZZComPort = $(SerParams)"\ZZZb"
    install "install-update-modem-info"

    set ZZZComPort = $(SerParams)"\ZZZc"
    install "install-update-modem-info"

    set ZZZComPort = $(SerParams)"\ZZZd"
    install "install-update-modem-info"

    Debug-Output "<DBG: FORCE> Final ModemIOBaseList = "$(ModemIOBaseList)
    Debug-Output "<DBG: FORCE> Final ModemIrqList = "$(ModemIrqList)

    set Combo5List      = $(ModemIrqList)
    set Combo5Out       = *($(ModemIrqList), 2)

    set Combo6List      = $(ModemIOBaseList)
    set Combo6Out       = *($(ModemIOBaseList), 3)

    set ComboListItemsIn  = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List, Combo6List, Combo7List}
    set ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out, Combo6Out, Combo7Out}

    ;-------------------------- END FORCE FIX - SHRADHA

    set Combo1Out          = $(!p:IRQLevel)
    set-dectohex Combo2Out = $(!p:IOBaseValue)
    set MediaValue         = $(!p:MediaValue)
    set NetworkAddress     = $(!p:NetworkAddress)
    set DLLPATH            = $(!p:DLLPATH)
;
;Combo++
    set-dectohex Combo7Out = $(!p:AttributeMem)
    set-dectohex Combo6Out = $(!p:ModemIOBase)
    set Combo5Out          = $(!p:ModemIrq)
    set Combo4Out          = $(!p:ModemPort)
;;Combo--
        Debug-Output "8 VASANTHA configure Adapter "$(DLLPATH)
  ;  ifstr(i) $(DLLPATH) != ""
    Debug-Output "9 VASANTHA Configure Adapter "$(DLLPATH)
        Split-String $(DLLPATH) "\" TempList
        QueryListSize ListSize $(TempList)
        Debug-Output "10 VASANTHA Configure Adapter "$(DLLPATH)
        ifstr(i) *($(TempList), $(ListSize)) != "\"
            set DLLPATH = $(DLLPATH)"\"
            Debug-Output "11 VASANTHA Configure Adapter "$(DLLPATH)
        endif
;    endif

    SetHelpFile $(DLLPATH)SMC8020m.hlp 30100 30105

    set AdapterStatus = FALSE

    set Combo3Out = $(MediaValue)

    set EditTextIn = {$(NetworkAddress)}
    set NotifyFields   = {NO, NO, NO}
    set EditTextLim    = {12}
    set EditFocusOn    = ""


        ifint $(!p:Function) == 1
            Set RadioIn = {2}
      else-ifint $(!p:Function) == 2
            Set RadioIn = {1}
      else-ifint $(!p:Function) == 3
            Set RadioIn = {3}
        endif
Debug-Output "12 VASANTHA  Adapter "$(DLLPATH)

    loadlibrary "SMC 8020 Install Diskette" $(DLLPATH)SMC8020m.dll DllHandle

RetryDialog =+
    EndWait


  ifstr(i) $(Option) == "SMC8020"
    set DlgTemplate = SMC8020
  else
     set DlgTemplate = LANMODEM
  endif


    set HelpContext = $(ContextLanMod)
    set Combo1Out          = $(!p:IRQLevel)
    set-dectohex Combo2Out = $(!p:IOBaseValue)
    set Combo3Out          = $(!p:MediaValue)
    set NetworkAddress     = $(!p:NetworkAddress)

    set-dectohex Combo7Out = $(!p:AttributeMem)
    set-dectohex Combo6Out = $(!p:ModemIOBase)
    set Combo5Out          = $(!p:ModemIrq)
    set Combo4Out          = $(!p:ModemPort)

    EndWait
    ui start "InputDlg" $(DllHandle)
    StartWait
    ui pop 1


    ifstr(i) $(DLGEVENT) == "CONTINUE"

      set NewNetworkAddress = *($(EditTextOut), 1)

      Debug-Output "Nishi 1"
      ifstr(i) $(NewNetworkAddress) != ""
          Debug-Output "Nishi 2"
          Split-String $(NewNetworkAddress), "0123456789ABCDEFabcdef-", TempList
          set HexList = ^(HexDigits, 1)
          QueryListSize ListSize $(TempList)
          ifint $(ListSize) == 11
                Debug-Output "Nishi 3"
                set Index1 = 1
                set Loop   = 1
          else
                Debug-Output "Nishi 4"$(ListSize)
                Shell "" WarnError $(BadAddr1)
                goto RetryDialog
          endif

NetAddrLoop =+
          set Temp1 = *($(TempList), $(Index1))
          ifcontains(i) $(Temp1) not-in $(HexList)
                Debug-Output "Nishi 5"
                Shell "" WarnError $(BadAddr2)$(Temp1)
                goto RetryDialog
          endif
          ifint $(Index1) == 2
                Debug-Output "Nishi 6"
                ifcontains(i) $(Temp1) in { 1,3,5,7,9,b,d,f }
                    Debug-Output "Nishi 7"
                    Shell "" WarnError $(BadAddr3)
                    goto Retry2ndDialog
                endif
          endif

          set-add Index1 = $(Index1), 1
          set-add Loop  = $(Loop), 1
          ifint $(Loop) < 13
                Debug-Output "Nishi 8"
                goto NetAddrLoop
          endif
      endif

      set AdapterStatus              = TRUE
; nishi
        ifstr(i) $(Combo2Out) == "Auto"
            set !p:IOBaseValue = 0
        else
            set-hextodec !p:IOBaseValue    = $(Combo2Out)
        endif
        ifstr(i) $(Combo1Out) == "Auto"
            set !p:IRQLevel = 0
        else
            set !p:IRQLevel = $(Combo1Out)
        endif
        ifstr(i) $(Combo7Out) == "Auto"
            set !p:AttributeMem  = 0
        else
            set-hextodec !p:AttributeMem  = $(Combo7Out)
        endif
; nishi
      set !p:NetworkAddress          = $(NewNetworkAddress)

      Debug-Output "Nishi setup: Combo2Out $(Combo2Out) IoBaseValue $(!p:IOBaseValue)"
      Debug-Output "Nishi setup: Combo1Out $(Combo1Out) IRQLevel $(!p:IRQLevel)"
      Debug-Output "Nishi setup: Combo7Out $(Combo7Out) Attributemem $(!p:AttributeMem)"

      set-hextodec !p:ModemIOBase    = $(Combo6Out)
      set !p:ModemIrq                = $(Combo5Out)
      set !p:ModemPort               = $(Combo4Out)

      set !p:MediaValue              = $(Combo3Out)

      set !p:Function                = 3

    endif

    ifstr(i) $(DLGEVENT) == "CONTINUE"
        IfStr(i) $(!STF_NCDETINFO) == {}
            Set !p:BusType   = 1
            Set !p:BusNumber = 0
        Else
            Set !p:BusType   = *($(!STF_NCDETINFO),5)
            Set !p:BusNumber = *($(!STF_NCDETINFO),6)
        EndIf
    Endif

    freelibrary $(DllHandle)
    return $(AdapterStatus)


[SetCopy]
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms FileConstants$(!STF_LANGUAGE)

    set DoCopy = $($0)
    set AddCopy = $($1)
    set SrcDir  = $($2)
    set InstallSection = $($3)
    set Needcopy = FALSE

    Ifstr(i) $(DoCopy) == "YES"
        set NeedCopy = TRUE
    else-ifstr(i) $(AddCopy) == "YES"
        set NeedCopy = TRUE
    else
        Return TRUE
    endif

    set BuiltIn = "YES"
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set BuiltIn = "NO"
    endif

    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) $(BuiltIn)

    Ifstr(i) $($R0) == STATUS_FAILED
        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
        Shell "" FatalError $($R0)
        Return FALSE
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
        Return FALSE
    Endif

    Set SrcDir = $($R1)

    install $(InstallSection)

    ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
        Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
        Shell "" FatalError $($R0)
        Return FALSE
    endif

    Return TRUE

[SetSoftware]
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms date

    set Option = $(!p:Option)
    read-syms RegistryConstants$(Option)

    Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
          $(ProductSoftwareName), +
          $(ProductSoftwareName), +
          $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
          $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
          $(NetEventDLL)

    Ifstr(i) $($R0) != NO_ERROR
        Shell $(UtilityInf) RegistryErrorString $($R0)
        Shell "" ShellError $($R0)
        Return FALSE
    endif

        ;
        ;   At this point:
        ;     $R1 contains the product version key handle;
        ;     $R2 contains the NetRules subkey handle;
        ;     $R3 contains the new Services key handle; and
        ;     $R4 contains the Parameters key
        ;     $R5 contains the Linkage Key
        ;
    set KeyProduct      = $($R1)
    Set SoftNetRulesKey = $($R2)
    CloseRegKey $($R3)
    CloseRegKey $($R4)
    CloseRegKey $($R5)

    Ifstr(i) $($R0) != NO_ERROR
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        Shell $(UtilityInf) RegistryErrorString $($R0)
        Shell "" ShellError $($R0)
        Return FALSE
    endif

    set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                        {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                        {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                        {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                        {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                        {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                        {InstallDate,$(NoTitle),$(!REG_VT_DWORD),$($0)}}

    Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)

    Ifstr(i) $($R0) != NO_ERROR
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        Shell $(UtilityInf) RegistryErrorString $($R0)
        Shell "" ShellError $($R0)
        Return FALSE
    endif

    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)

    CloseRegKey $(KeyProduct)
    CloseRegKey $(SoftNetRulesKey)

    Ifstr(i) $($R0) != NO_ERROR
        Shell $(UtilityInf) RegistryErrorString $($R0)
        Shell "" ShellError $($R0)
        Return FALSE
    endif
    return TRUE

[SetHardware]
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms date

    set Option = $(!p:Option)
    Debug-Output "in SetHardware "$(ProductKeyName)
    read-syms RegistryConstants$(Option)

    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

    Ifstr(i) $($R0) != NO_ERROR
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        Shell $(UtilityInf) RegistryErrorString $($R0)
        Shell "" ShellError $($R0)
        Return FALSE
    endif

;
;   At this point:
;     $R1  Registry key variable for HARDWARE\Netcard\(n)
;     $R2  Registry key variable for HARDWARE\Netcard\(n)\\NetRules
;     $R3  Registry key handle for <service>\Parameters key
;     $R4  Adapter number assigned to adapter
;     $R5  Service name generated by combining svc name with adapter number
;
    set !KeyParameters   = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber   = $($R4)

    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),$($0)}}

    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    Ifstr(i) $($R0) != NO_ERROR
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        Shell $(UtilityInf) RegistryErrorString $($R0)
        Shell "" ShellError $($R0)
        Return FALSE
    endif

    CloseRegKey $($R1)

    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""

;; nishi
    set !AdapterName = $(ProductHardwareName)$(AdapterNumber)
;; nishi

    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

    Debug-Output "VASANTHA "$ProductHardwareName
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)

    Ifstr(i) $($R0) != NO_ERROR
        CloseRegKey $(!KeyParameters)
        CloseRegKey $(KeyAdapterRules)
        Shell $(UtilityInf) RegistryErrorString $($R0)
        Shell "" ShellError $($R0)
        Return FALSE
    endif

    CloseRegKey $(KeyAdapterRules)
    return TRUE

[WriteParameters]
    read-syms FileConstants
    read-syms GeneralConstants

    set Option = $(!p:Option)

    read-syms RegistryConstants$(Option)

    set Base           = $(!p:IOBaseValue)
    set Irq            = $(!p:IRQLevel)
    set Media          = $(!p:MediaValue)
    set NetworkAddress = $(!p:NetworkAddress)
    set BusType        = $(!p:BusType)
    set BusNumber      = $(!p:BusNumber)
    set SpeedValue     = $(!p:SpeedValue)
    set PCMCIA         = $(!p:PCMCIA)

;;Combo++

    set AttributeMemValue = $(!p:AttributeMem)
    set ModemIOBaseValue  = $(!p:ModemIOBase)
    set ModemIrqValue     = $(!p:ModemIrq)
    set ModemPortValue    = $(!p:ModemPort)
    set FunctionValue     = $(!p:Function)

;;Combo--

    ifint $(BusType) == 8
        set PCMCIA  = 1
        set BusType = 1
    endif

    Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusType)},+
                        {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {Transceiver,$(NoTitle),$(!REG_VT_SZ),$(Media)},+
                        {Interrupt,$(NoTitle),$(!REG_VT_DWORD),$(Irq)},+
                        {IoBase,$(NoTitle),$(!REG_VT_DWORD),$(Base)},+
                        {Speed,$(NoTitle),$(!REG_VT_DWORD),$(SpeedValue)},+
                  {PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(!p:AttributeMem)},+
                  {PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),4096}}
; nishi 11/18/97        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}}

    Shell  $(UtilityInf), AddValueList, $(!KeyParameters), $(NewValueList)
    Set Status = $($R0)

    IfInt $(PCMCIA) == 1
;; nishi
;;      Set NewValueList = {{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
;;                          {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(Irq)},+
;;                          {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(Base)}}
;; nishi
        Set NewValueList = {{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(Irq)},+
                            {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(!AdapterName)},+
                            {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(Base)}}


;;Combo++
        ifstr(i) $(Option) == "SMC8020M"
             OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\EtherEZEthernetModem" $(MAXIMUM_ALLOWED) MyNewSerialHandle
             Ifstr $(MyNewSerialHandle) == $(KeyNull)
                           OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialKey
                           CreateRegKey $(SerialKey) {"EtherEZEthernetModem",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
                           CloseRegKey $(SerialKey)
             endif
;; nishi
;;              set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), $(!p:ModemPort)},+       ; "COMx"
;;                                                          {ForceFifoEnable,  $(NoTitle),$(!REG_VT_DWORD),   1},+                            ; Always true for EtherEZ
;;                                                          {Interrupt,        $(NoTitle),$(!REG_VT_DWORD),   $(!p:ModemIrq)},+             ; Interrupt for EtherEZ modem
;;                                                          {PortAddress,      $(NoTitle),$(!REG_VT_DWORD),   $(!p:ModemIOBase)}}       ; I/O Base address for EtherEZ
;; nishi

             set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), $(!p:ModemPort)},+       ; "COMx"
                                 {ForceFifoEnable,  $(NoTitle),$(!REG_VT_DWORD),   1},+                            ; Always true for EtherEZ
                                 {Interrupt,        $(NoTitle),$(!REG_VT_DWORD),   $(Irq)},+             ; Interrupt for EtherEZ modem
                                 {ExternallyConfiguredModem , $(NoTitle), $(!REG_VT_DWORD), 1},+
                                 {PortAddress,      $(NoTitle),$(!REG_VT_DWORD),   $(!p:ModemIOBase)}}       ; I/O Base address for EtherEZ

             Shell  $(UtilityInf), AddValueList, $(MyNewSerialHandle), $(NewValueList)
             CloseRegKey $(MyNewSerialHandle)

             OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) MyNewSerialHandle
             Ifstr $(MyNewSerialHandle) == $(KeyNull)
                        OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) SerialKey
                        CreateRegKey $(SerialKey) {"SERIALCOMM",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
                        CloseRegKey $(SerialKey)
             endif
             SetRegValue $(MyNewSerialHandle) {"EtherEZEthernetModem",$(NoTitle),$(!REG_VT_SZ),$(!p:ModemPort)}

             CloseRegKey $(MyNewSerialHandle)
             OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) MyNewSerialHandle
             Ifstr $(MyNewSerialHandle) == $(KeyNull)
                        OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) SerialKey
                        CreateRegKey $(SerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
                        CloseRegKey $(SerialKey)
             endif
             SetRegValue $(MyNewSerialHandle) {$(!p:ModemPort)":",$(NoTitle),$(!REG_VT_SZ), "9600,n,8,1"}
             CloseRegKey $(MyNewSerialHandle)
;; nishi
;;       Set NewValueList = {{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
;; nishi
             Set NewValueList = {{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
                             {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(!AdapterName)},+
                   {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(Irq)},+
                   {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(Base)},+
                   {COMIRQNumber,$(NoTitle),$(!REG_VT_DWORD),$(ModemIrqValue)},+
                   {COMPort,$(NoTitle),$(!REG_VT_SZ),$(!p:ModemPort)},+
                   {IoBaseAddress_1,$(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseValue)},+
                   {COMIOBase,$(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseValue)},+
                   {Function,$(NoTitle),$(!REG_VT_DWORD),$(FunctionValue)},+
                   {MULTIFUNCTION,$(NoTitle),$(!REG_VT_DWORD),1}}
        endif

;;Combo--

        Shell  $(UtilityInf), AddValueList, $(!KeyParameters), $(NewValueList)
        Set Status = $($R0)

        ifstr(i) $(Option) == "SMC8020M"
             OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DESCRIPTION\system\PCMCIA PCCARDs" $(MAXIMUM_ALLOWED) MyNewSerialHandle
             Ifstr $(MyNewSerialHandle) == $(KeyNull)
                OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DESCRIPTION\system" $(MAXIMUM_ALLOWED) SerialKey
                CreateRegKey $(SerialKey) {"PCMCIA PCCARDs",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
                CloseRegKey $(SerialKey)



                set NewValueList = {{SMC8020M,$(NoTitle),$(!REG_VT_MULTI_SZ),$(MyList)}}


                Shell  $(UtilityInf), AddValueList, $(MyNewSerialHandle), $(NewValueList)
                CloseRegKey $(MyNewSerialHandle)
             endif
        endif
        ifstr(i) $(Option) == "SMC8020"
            Shell "" SetUpPcmcia
        endif

    else
        DeleteRegValue $(!KeyParameters) "Pcmcia"
        DeleteRegValue $(!KeyParameters) "IoBaseAddress"
        DeleteRegValue $(!KeyParameters) "InterruptNumber"
    endif

    CloseRegKey $(!KeyParameters)

    Ifstr(i) $(Status) != NO_ERROR
        Shell $(UtilityInf) RegistryErrorString $(Status)
        Shell "" ShellError $($R0)
        Return FALSE
    endif

    Return TRUE


[ShellError]
    read-syms DialogConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)

    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(FunctionTitle)
    set STF_MB_TEXT  = $($0)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1

    ifstr(i) $(STF_MB_TEXT) == ""
        set STF_MB_TEXT = "Unknown Error"
    endif

    ui start "Error Message"
    Return

[Install-Option]
    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-SMC9000 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
    endif

    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"

   AddSectionFilesToCopyList Files-SMC9000 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
;;   AddSectionFilesToCopyList Files-SMCncdet $(SrcDir) $(!STF_WINDOWSSYSPATH)

   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList

   exit

[Install-Detection-Dll]
    LibraryProcedure STATUS,$(!LIBHANDLE), CopySingleFile $(SrcDir)"\SMCncdet.dll"  $(!STF_WINDOWSSYSPATH)"\SMCncdet.dll"
    exit

[PrepareDetectionDll]
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms FileConstants$(!STF_LANGUAGE)

    Set NewDllName   = $($0)
    set SrcDir       = $(!p:SrcDir)
    Set Status       = STATUS_FAILED
    Set DllValueName = "NetcardDlls"

    ifstr(i) $(SrcDir) != ""
        Split-String $(SrcDir) "\" TempList
        QueryListSize ListSize $(TempList)
        ifstr(i) *($(TempList), $(ListSize)) != "\"
            set SrcDir = $(SrcDir)"\"
        endif
    endif

    OpenRegKey $(!REG_H_LOCAL) "" "System\Setup" $(MAXIMUM_ALLOWED) KeySetup
    Ifstr(i) $(KeySetup) == $(KeyNull)
        Debug-Output "System\Setup key is NULL"
        Goto PDD_Return
    Endif

    Set DllFound = 0
    GetRegValue $(KeySetup) $(DllValueName) DllNamesValue
    Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS)
        Debug-Output "LastError != Success"
        Shell $(UtilityInf),RegistryErrorString,$(RegLastError)
        Shell "" FatalError $($R0)
        Goto PDD_Return
    Endif

    Set DllNames = *($(DllNamesValue),4)
    ForListDo $(DllNames)
        Ifstr(i) $($) == $(NewDllName)
            Set DllFound = 1
        Endif
    EndForListDo
    Ifint $(DllFound) == 0
        Set DllNames = >($(DllNames),$(NewDllName))
        Set ValueInfo = {$(DllValueName), $(NoTitle), $(!REG_VT_MULTI_SZ), $(DllNames)}
        SetRegValue $(KeySetup) $(ValueInfo)
        Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
            Shell "" SetCopy "YES" $(AddCopy) $(SrcDir) "Install-Detection-Dll"

            Shell $(ParamInf) Param_ControlDetection DTEND
            Shell $(ParamInf) Param_ControlDetection DTSTART
            Set Status = STATUS_SUCCESSFUL
        Else
            Shell $(UtilityInf),RegistryErrorString,$(RegLastError)
            Shell "" FatalError $($R0)
        Endif
    Else
        set Status = STATUS_SUCCESSFUL
    Endif
    CloseRegKey $(KeySetup)
PDD_Return = +
    Debug-Output "Status from PrepareDetectionDll = "$(Status)
    Return $(Status)

[FatalError]
    read-syms FileConstants

    ifstr(i) $($0) == ""
        set Message = "Unknown Error"
    else
        set Message = $($0)
    endif

    Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) FATAL $(Message)
    Return

[VerifyError]
    read-syms FileConstants

    ifstr(i) $($0) == ""
        set Message = "Unknown Error"
    else
        set Message = $($0)
    endif

    Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) WARNING $(Message)
    Return $($R1)

[WarnError]
    read-syms FileConstants

    ifstr(i) $($0) == ""
        set Message = "Unknown Error"
    else
        set Message = $($0)
    endif

    Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) NONFATAL $(Message)
    Return

[DebugControl]
    set !DebugOutputControl = 1
    return

[SetUpPcmcia]
    Read-Syms GeneralConstants
    Read-Syms PcmciaKeys

    Debug-Output "Opening PCMCIA DataBase"
    OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaPath) $(MAXIMUM_ALLOWED) PcmciaKey

    IfStr(i) $(PcmciaKey) == $(KeyNull)
        Debug-Output "Failed to open "$(PcmciaPath)
        Shell "" FatalError "Cannot Open PCMCIA Registry DataBase!"
        Return FALSE
    EndIf

    Debug-Output "Opening SMC Key"

    Debug-Output "SMCPcmciaPath "$(SMCPcmciaPath)

    OpenRegKey $(!REG_H_LOCAL) "" $(SMCPcmciaPath) $(MAXIMUM_ALLOWED) SMCPcmciaKey

    IfStr(i) $(SMCPcmciaKey) == $(KeyNull)
        Debug-Output "Open failed - creating key"
        CreateRegKey $(PcmciaKey) {"SMC", 0, 0 } "" $(MAXIMUM_ALLOWED) "" SMCPcmciaKey
        IfStr(i) $(SMCPcmciaKey) == $(KeyNull)
            Debug-Output "Failed to create SMC key"
            Shell "" FatalError "Cannot Create SMC Key in Registry DataBase PCMCIA!"
            CloseRegKey $(PcmciaKey)
            Return FALSE
        EndIf
    EndIf

    Debug-Output "Opening SMC 8020 key = "$(SMC8020Path)
    OpenRegKey $(!REG_H_LOCAL) "" $(SMC8020Path) $(MAXIMUM_ALLOWED) SMC8020Key

    IfStr(i) $(SMC8020Key) == $(KeyNull)
        Debug-Output "Open failed - creating key"
        CreateRegKey $(SMCPcmciaKey) {$(CardKeyName), 0, 0 } "" $(MAXIMUM_ALLOWED) "" SMC8020Key
        IfStr(i) $(SMC8020Key) == $(KeyNull)
            Shell "" FatalError "Cannot Create SMC 8020 Key in Registry DataBase PCMCIA!"
            CloseRegKey $(SMCPcmciaKey)
            CloseRegKey $(PcmciaKey)
            Return FALSE
        EndIf
    EndIf

    Debug-Output "Writing Driver Keyword"
    SetRegValue $(SMC8020Key) {Driver, 0, $(!REG_VT_SZ), "SMC8020"}
    CloseRegKey $(SMC8020Key)
    CloseRegKey $(SMCPcmciaKey)
    CloseRegKey $(PcmciaKey)
    Debug-Output "All done with SetUpPcmcia"
    return TRUE

;;Combo++

[CustomMessageDlg]
    DlgType      = "MessageBox"
    STF_MB_TITLE = "SMC EtherEZ PC Card+Modem (SMC8020BTM) Adapter Setup"
    STF_MB_TEXT  = "Ethernet and Modem will be removed together"
    STF_MB_TYPE  = 1
    STF_MB_ICON  = 1
    STF_MB_DEF   = 1
;;Combo--

[SetUpMulti]
    Read-Syms GeneralConstants
    Read-Syms PcmciaKeysSMC8020M

    Debug-Output "Opening PCMCIA DataBase"
    OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaPath) $(MAXIMUM_ALLOWED) PcmciaKey

    IfStr(i) $(PcmciaKey) == $(KeyNull)
        Debug-Output "Failed to open "$(PcmciaPath)
        Shell "" FatalError "Cannot Open PCMCIA Registry DataBase!"
        Return FALSE
    EndIf

    Debug-Output "Opening SMC Key"

    Debug-Output "SMCPcmciaPath "$(SMCPcmciaPath)

    OpenRegKey $(!REG_H_LOCAL) "" $(SMCPcmciaPath) $(MAXIMUM_ALLOWED) SMCPcmciaKey

    IfStr(i) $(SMCPcmciaKey) == $(KeyNull)
        Debug-Output "Open failed - creating key"
        CreateRegKey $(PcmciaKey) {"SMC", 0, 0 } "" $(MAXIMUM_ALLOWED) "" SMCPcmciaKey
        IfStr(i) $(SMCPcmciaKey) == $(KeyNull)
            Debug-Output "Failed to create SMC key"
            Shell "" FatalError "Cannot Create SMC Key in Registry DataBase PCMCIA!"
            CloseRegKey $(PcmciaKey)
            Return FALSE
        EndIf
    EndIf

    Debug-Output "Opening SMC 8020 key = "$(SMC8020Path)
    OpenRegKey $(!REG_H_LOCAL) "" $(SMC8020Path) $(MAXIMUM_ALLOWED) SMC8020Key

    IfStr(i) $(SMC8020Key) == $(KeyNull)
        Debug-Output "Open failed - creating key"
        CreateRegKey $(SMCPcmciaKey) {$(CardKeyName), 0, 0 } "" $(MAXIMUM_ALLOWED) "" SMC8020Key
        IfStr(i) $(SMC8020Key) == $(KeyNull)
            Shell "" FatalError "Cannot Create SMC 8020 Key in Registry DataBase PCMCIA!"
            CloseRegKey $(SMCPcmciaKey)
            CloseRegKey $(PcmciaKey)
            Return FALSE
        EndIf
    EndIf

    Debug-Output "Writing Driver Keyword"
    SetRegValue $(SMC8020Key) {Driver, 0, $(!REG_VT_SZ), "SMC8020M"}
    CloseRegKey $(SMC8020Key)
    CloseRegKey $(SMCPcmciaKey)
    CloseRegKey $(PcmciaKey)
    Debug-Output "All done with SetUpPcmcia"
    return TRUE


; -------------------------- BEGIN FORCE FIX - SHRADHA
[install-update-modem-info]

        OpenRegKey $(!REG_H_LOCAL) "" $(ZZZComPort) $(MAXIMUM_ALLOWED) +
                ZZZHandle

        ifstr $(ZZZHandle) == $(KeyNull)
                Debug-Output "<DBG: FORCE> OpenRegKey "$(ZZZComPort)" failed"
                goto done_update_modem_info
        endif

        Debug-Output "<DBG: FORCE> GetRegValue DosDevices"
        GetRegValue $(ZZZHandle) "DosDevices" DosDevicesValue
        set DosDevicesValueType = *($(DosDevicesValue), 3)
        set DosDevicesValueData = *($(DosDevicesValue), 4)
        ifint $(DosDevicesValueType) != $(!REG_VT_SZ)
                Debug-Output +
                "<DBG: FORCE> Bad DosDevices "$(ZZZComPort)" "$(DosDevicesValue)
                goto done_update_modem_info
        endif

        GetRegValue $(ZZZHandle) "PortAddress" PortAddressValue
        set PortAddressValueType = *($(PortAddressValue), 3)
        set PortAddressValueData = *($(PortAddressValue), 4)
        ifint $(PortAddressValueType) != $(!REG_VT_DWORD)
                Debug-Output +
                "<DBG: FORCE> Bad PortAddress "$(ZZZComPort)" "$(PortAddressValue)
                goto done_update_modem_info
        endif

        GetRegValue $(ZZZHandle) "Interrupt" InterruptValue
        set InterruptValueType = *($(InterruptValue), 3)
        set InterruptValueData = *($(InterruptValue), 4)
        ifint $(InterruptValueType) != $(!REG_VT_DWORD)
                Debug-Output +
                "<DBG: FORCE> Bad Interrupt "$(ZZZComPort)" "$(InterruptValue)
                goto done_update_modem_info
        endif

        ; now update the correct modem info

        Debug-Output +
        "<DBG: FORCE> "$(DosDevicesValueData)": iobase = "$(PortAddressValueData)", irq = "$(InterruptValueData)

        ifstr(i) $(DosDevicesValueData) == "COM1"
                set comNumber = 1
        else-ifstr(i) $(DosDevicesValueData) == "COM2"
                set comNumber = 2
        else-ifstr(i) $(DosDevicesValueData) == "COM3"
                set comNumber = 3
        else-ifstr(i) $(DosDevicesValueData) == "COM4"
                set comNumber = 4
        else
                goto done_update_modem_info
        endif


        set-dectohex PortAddressValueDataHex = $(PortAddressValueData)
        set-dectohex InterruptValueDataHex = $(InterruptValueData)

        Debug-Output +
        "<DBG: FORCE> PortAddressValueDataHex = "$(PortAddressValueDataHex)
        Debug-Output +
        "<DBG: FORCE> InterruptValueDataHex = "$(InterruptValueDataHex)

        ; Since the ModemIOBaseList and ModemIrqList in
        ; this inf file are not starting from COM1 and going
        ; to COM4 in order, we need to determine the correct
        ; index for this COM number

        ;Debug-Output "<DBG: FORCE> comNumber = "$(comNumber)

        ForListDo $(ModemPortValues)
                ;Debug-Output "<DBG: FORCE> item number "$(#)" is "$($)
                ifint $($) == $(comNumber)
                        set itemNumberToReplace = $(#)
                endif
        EndForListDo

        Debug-Output "<DBG: FORCE> itemNumberToReplace = "$(itemNumberToReplace)
        ;
        ; Change ModemIOBaseList
        ;
        set oldList = $(ModemIOBaseList)
        set newData = $(PortAddressValueDataHex)
        set return_addr = replace_modem_io_base
        goto replace_list_item
replace_modem_io_base = +
        set ModemIOBaseList = $(newList)

        ;
        ; Update ModemIrqList by adding irq mentioned in ZZZ entry
        ; (provided it is not already there)
        ;
        ifcontains(i) $(InterruptValueData) not-in $(ModemIrqList)
                set ModemIrqList = >($(ModemIrqList), $(InterruptValueData))
        endif


done_update_modem_info = +
        ifstr $(ZZZHandle) != $(KeyNull)
                CloseRegKey $(ZZZHandle)
        endif
        exit

replace_list_item = +
        ;
        ; INPUT: needs the following variables to be initialized
        ;       - oldList
        ;       - itemNumberToReplace
        ;       - newData
        ;       - return_addr (i.e. label to jump back to)
        ; OUTPUT: returns with the newList initialized
        ;


        ;Debug-Output "<DBG: FORCE> Replacing item number "$(itemNumberToReplace)" in the list "$(oldList)" with the data "$(newData)

        set newList = {}
        ForListDo $(oldList)
                ifint $(#) == $(itemNumberToReplace)
                        set newList = >($(newList), $(newData))
                else
                        set newList = >($(newList), $($))
                endif
        EndForListDo
        goto $(return_addr)



;-------------------------- END FORCE FIX - SHRADHA
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.77