;**************************************************************************** ; OEMSETUP.INF - 3Com Megahertz LAN PC Card (589) Windows NT Setup File ;---------------------------------------------------------------------------- ; Revision History ; 1.0 Release for 589E 07/02/98 (MS) ; 1.1 Fixed HQ37 07/08/98 (MS) ; 1.2 Fixed HQ45 Add FullDuplex Key 07/10/98 (MS) ; 1.3 Add Transceiver and Network list 07/16/98 (MS) ; 1.4 Fixed HQ82 - remove TouchDown 07/16/98 (MS) ; 1.5 Change BOM 07/21/98 (MS) ; 1.6 add device type 07/30/98 (ML) ; 1.7 Fix HQ10 - update driver problem 08/07/98 (MS) ; 1.8 Fix HQ43 - Copy TCAUM589.HLP to WinDir 08/12/98 (MS) ; 1.9 Fix HQ63 - Ask TCAUM589.HLP in \I386 08/21/98 (MS) ; 2.0 Fix HQ67 - Copy TCAUM589.HLP problem 08/25/98 (MS) ; %VER 2.1 Fix HQ71 - Remove Diagnostics 08/27/98 (MS) ;**************************************************************************** [Identification] OptionType = NetAdapter [PlatformsSupported] ISA PCMCIA PCI "Jazz-Internal Bus" [Options] el3c589 [OptionsTextENG] el3c589 = "3Com Megahertz LAN PC Card (Ethernet)" [AllFileConstants] GenericInfVersion = " v1.00" UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" ;;TrayIconExe = "TCASUTI.EXE" ;;InstallerExe = "TCAUDIAG.EXE" UninstallExe = "UN3C589A.EXE" UnInstallName = "3Com PC Card Diagnostics Utilities" Manufacturer = "3Com" [FileConstants-el3c589] GenericAdapterName = "3Com Megahertz LAN PC Card (Ethernet)" GenericDriverName = "3Com Megahertz LAN PC Card (Ethernet)" ;GenericSysName = "EL589ND3.SYS" GenericName = "el3c589" ProductMajorVersion = "3" ProductMinorVersion = "51" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "el3c589" ProductSoftwareDescription = "3Com Megahertz LAN PC Card (Ethernet)" ;ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName) NetRuleSoftwareType = "el3c589Sys ndisDriver el3c589Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """el3c589Sys"" yes no container" NetRuleSoftwareClass = {"el3c589Driver basic"} NetRuleSoftwareBindable = {"el3c589Driver el3c589Adapter non exclusive 100"} ProductHardwareName = "el3c589" ProductHardwareDescription = "3Com Megahertz LAN PC Card (Ethernet)" NetRuleHardwareType = "el3c589 el3c589Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"el3c589Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ;;ProductSWKey = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName) ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" VERS1Manufacturer = "3Com" VERS1Product = "3Com Megahertz LAN PC Card" VERS1Type = "el3c589-EtherLink" PCMCIA = 1 [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers DIAGCARDTYPE = "TCAUM589" NT350VersionConstant = "3.50" NT310VersionConstant = "3.10" NT400VersionConstant = "(4.0)" [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) Set !DebugOutputControl = 1 set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms AllFileConstants read-syms FileConstants"-"$(Option) read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms AllFileConstants$(!STF_LANGUAGE) read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt Ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue) CloseRegKey $(KeyNt) Endif ;; NT v4.00 has NDIS4 ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) set NDIS_DISK_A = NDIS set NDIS_VER = NDIS4 set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL589ND4.SYS" else set NDIS_DISK_A = NDIS set NDIS_VER = NDIS3 set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL589ND3.SYS" endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) Debug-Output "$(InfFile) $(Option): Configureadapter" set Error = "Windows NT v3.10 is not support by this product" goto fatal endif Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == update set StartLabel = upgradesoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ; Shradha ; set IRQValue = *($(IRQList), 5) ; set IOBaseAddrValue = *($(IOBaseAddrList), 1) set IRQValue = *($(IRQList), 9) set IOBaseAddrValue = *($(IOBaseAddrList), 33) ; Shradha set DuplexValue = *($(DuplexList), 1) set TransceiverValue = *($(TransceiverList),1) set NetworkValue = *($(NetworkList),2) Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set FileToCheck = $($R1)\OEMSETUP.INF LibraryProcedure FilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck) Ifstr(i) $(FilePresent) != "YES" Goto installadapter Endif Set SrcDir = $($R1) install "Install-Dll" install "Install-Help" Debug-Output "Install-3nicdiag" install "Install-3nicdiag" StartWait ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) Debug-Output "$(InfFile) $(Option): Windows NT 4.00" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" $(!REG_KEY_ALL_ACCESS) KeyNt ifstr $(KeyNt) == "" CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt endif OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2 ifstr $(KeyNt2) == "" CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt2 endif ;; set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ),"3Com PC Card Diagnostics"},+ ;; {UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C589A.EXE"}} set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ),""},+ {UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C589A.EXE"}} Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyNt) CloseRegKey $(KeyNt2) endif EndWait goto adaptersetup configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueIndex = $(ValueData) else-ifstr(i) $(ValueName) == "FullDuplex" set DuplexIndex = $(ValueData) else-ifstr(i) $(ValueName) == "TransceiverType" set TransceiverIndex = $(ValueData) else-ifstr(i) $(ValueName) == "DriverOptimization" set NetworkIndex = $(ValueData) ;Shradha else-ifstr(i) $(ValueName) == "AdapterName" set OldAdapterName = $(ValueData) Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName) ;Shradha endif EndForListDo set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex))) ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQList), 5) endif set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif set DuplexValue = *($(DuplexList), ~($(DuplexValues),$(DuplexIndex))) ifstr(i) $(DuplexValue) == "" set DuplexValue = *($(DuplexValues), 1) endif set TransceiverValue = *($(TransceiverList), ~($(TransceiverValues),$(TransceiverIndex))) ifstr(i) $(TransceiverValue) == "" set TransceiverValue = *($(TransceiverValues), 1) endif set NetworkValue = *($(NetworkList), ~($(NetworkValues),$(NetworkIndex))) ifstr(i) $(NetworkValue) == "" set NetworkValue = *($(NetworkValues), 2) endif adaptersetup = + LoadLibrary "disk 1" $(DialogDllName) hLib read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option) set ENABLER = 0 ui start "InputDlg" $(hLib) set ExitButton = $(ButtonPressed) FreeLibrary $(hLib) ifstr(i) $(DLGEVENT) == "CONTINUE" set IOBaseAddrIndex = $(Combo1Out) set IRQValueIndex = $(Combo2Out) set DuplexIndex = $(Combo3Out) set TransceiverIndex = $(Combo4Out) set NetworkIndex = $(Combo5Out) set ExitButton = $(ButtonPressed) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else set CommonStatus = STATUS_USERCANCEL ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif skipoptions = + ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + set BusTypeNum = 1 ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; ; For 589E card ; Debug-Output "$(InfFile) $(Option): Write Pcmcia database" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 589E" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) Debug-Output "CreatRegKey (589E)" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"3Com",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey ($MyPcmciaKey) endif OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"Megahertz 589E",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey ($MyPcmciaKey) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 589E" $(MAXIMUM_ALLOWED) MyPcmciaHandle endif set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"el3c589"},{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}} Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - Driver:REG_SZ:el3c589" CloseRegKey $(MyPcmciaHandle) ; ; For 3C589D card ; Debug-Output "$(InfFile) $(Option): Write Pcmcia database" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589D" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) Debug-Output "CreatRegKey (3C589D)" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"3Com Corporation",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey ($MyPcmciaKey) endif OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"3C589D",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey ($MyPcmciaKey) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589D" $(MAXIMUM_ALLOWED) MyPcmciaHandle endif set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"el3c589"}} Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - Driver:REG_SZ:el3c589" CloseRegKey $(MyPcmciaHandle) ; ; For 3C589A, 3C589B, and 3C589C cards ; Debug-Output "$(InfFile) $(Option): Write Pcmcia database" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) Debug-Output "CreatRegKey (3C589)" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"3Com Corporation",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey ($MyPcmciaKey) endif OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"3C589",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey ($MyPcmciaKey) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589" $(MAXIMUM_ALLOWED) MyPcmciaHandle endif set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"el3c589"}} Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - Driver:REG_SZ:el3c589" CloseRegKey $(MyPcmciaHandle) set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex))) set IOBaseAddrValue = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex))) set DuplexValue = *($(DuplexValues), ~($(DuplexList), $(DuplexIndex))) set TransceiverValue = *($(TransceiverValues), ~($(TransceiverList),$(TransceiverIndex))) set NetworkValue = *($(NetworkValues), ~($(NetworkList),$(NetworkIndex))) ;Shradha ifstr $(OldAdapterName) == "" Debug-Output "<DBG> setting OldAdapterName" set OldAdapterName = $(ProductHardwareName)$(AdapterNumber) endif Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName) ;Shradha set NewValueList = {{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+ {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+ {FullDuplex, $(NoTitle),$(!REG_VT_DWORD),$(DuplexValue)},+ {TransceiverType, $(NoTitle),$(!REG_VT_DWORD),$(TransceiverValue)},+ {DriverOptimization, $(NoTitle),$(!REG_VT_DWORD),$(NetworkValue)},+ {CardType, $(NoTitle),$(!REG_VT_DWORD),0},+ {AdapterType, $(NoTitle),$(!REG_VT_DWORD),259},+ {OSType, $(NoTitle),$(!REG_VT_DWORD),1},+ ;Shradha ;{Pcmcia, $(NoTitle),$(!REG_VT_DWORD),1}+ {SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+ {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)}+ ;Shradha } Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful bindingadapter = + set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) Debug-Output "$(InfFile) $(Option): Windows NT 4.00 remove icon" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = TCASUTIEXE DeleteRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) endif ; Shradha ;RunProgram ExitCode "Windows Directory" "" UN3C589A.EXE "-inf" ; Shradha goto end upgradesoftware = + install "Install-Option" ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) else goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) else goto fatalregistry endif endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMSETUP.INF" return [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" ; Shradha ;AddSectionFilesToCopyList Files-NDIS $(SrcDir)ndis $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-NDIS $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers ; Shradha endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-3nicdiag $(SrcDir)ndis $(!STF_WINDOWSSYSPATH) ;; AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-NDIS $(SrcDir)ndis $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" ; Shradha AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) ; Shradha set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-3nicdiag] set STF_VITAL = "" AddSectionFilesToCopyList Files-3nicdiag $(SrcDir)ndis $(!STF_WINDOWSSYSPATH) ;; AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit ;;[Install-TrayAndCpl] ;; set STF_VITAL = "" ;; AddSectionFilesToCopyList Files-TrayAndCpl $(SrcDir)win32 $(!STF_WINDOWSSYSPATH) ;; set !STF_NCPA_FLUSH_COPYLIST = TRUE ;; CopyFilesInCopyList ;; Exit [Install-Help] set STF_VITAL = "" AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Source Media Descriptions] 1 = "Windows NT Setup Disk #1" 2 = "3Com Megahertz LAN PC Card Installation Disk" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 2, OEMSETUP.INF, SIZE=60000, RENAME=$(!UG_Filename) [Files-Dll] 2, El3c589.DLL, SIZE=50000 [Files-3nicdiag] ; Shradha ;2,UN3C589A.EXE, SIZE=100000 ; Shradha ;2,TCAUM589.HLP, SIZE=80000 [Files-NDIS] 2,EL589ND4.SYS , SIZE=60000 ; Shradha ;2,EL589ND3.SYS , SIZE=60000 ; Shradha ;[Files-HwDll] ;2,TCAMHWAC.DLL, SIZE=90000 ;2,TCAICCHG.SYS, SIZE=9000 ;[Files-TrayAndCpl] ;2,TCASUTI.EXE, SIZE=10000 [Files-Help] ; Shradha ;2,TCAUM589.HLP, SIZE=80000 ; Shradha [LanguagesSupported] ENG [AllFileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" DialogDllName = "El3c589.DLL" [FileConstantsENG-el3c589] FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion) ProductSoftwareTitle = $(GenericDriverName) ProductHardwareTitle = $(GenericAdapterName) IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) InterruptStyleValues = ^(InterruptStyleChoices, 2) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) DuplexList = ^(DuplexChoices, 1) DuplexValues = ^(DuplexChoices, 2) TransceiverList = ^(TransceiverChoices, 1) TransceiverValues = ^(TransceiverChoices, 2) NetworkList = ^(NetworkChoices, 1) NetworkValues = ^(NetworkChoices, 2) [DialogConstantsENG-el3c589] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG-el3c589] DlgType = "RadioCombination" DlgTemplate = "el3c589" Caption = $(FunctionTitle) HelpContext = $(!IDH_DB_OEMNADE2_INS) CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO} Combo1Label = "I/O Port:" Combo2Label = "Interrupt:" Combo3Label = "Full Duplex:" Combo4Label = "Transceiver Type:" Combo5Label = "Driver Optimization:" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrValue) Combo2List = $(IRQList) Combo2Out = $(IRQValue) Combo3List = $(DuplexList) Combo3Out = $(DuplexValue) Combo4List = $(TransceiverList) Combo4Out = $(TransceiverValue) Combo5List = $(NetworkList) Combo5Out = $(NetworkValue) ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List,Combo5List} ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out,Combo5Out} EditTextIn = {"",""} EditTextLim = {"",""} [IRQChoices] IRQ_1 = "3",3 IRQ_2 = "5",5 IRQ_3 = "7",7 IRQ_4 = "9",9 IRQ_5 = "10",10 IRQ_6 = "11",11 IRQ_7 = "12",12 IRQ_8 = "15",15 ; Shradha IRQ_9 = "Auto",0 ; Shradha [DuplexChoices] DUP_1 = "Disabled",0 DUP_2 = "Enabled",1 [TransceiverChoices] TRAN_1 = "Auto Select",0 TRAN_2 = "TP (RJ-45)",1 TRAN_3 = "Coax (BNC)",2 [NetworkChoices] NET_1 = "DOS Client",16 NET_2 = "Windows & OS/2 Client",32 NET_3 = "Server",48 [IOBaseAddrChoices] IOBase_1 = "0x300",768 IOBase_2 = "0x200",512 IOBase_3 = "0x210",528 IOBase_4 = "0x220",544 IOBase_5 = "0x230",560 IOBase_6 = "0x1E0",480 IOBase_7 = "0x250",592 IOBase_8 = "0x260",608 IOBase_9 = "0x270",624 IOBase_10 = "0x280",640 IOBase_11 = "0x290",656 IOBase_12 = "0x2A0",672 IOBase_13 = "0x2B0",688 IOBase_14 = "0x2C0",704 IOBase_15 = "0x2D0",720 IOBase_16 = "0x2E0",736 IOBase_17 = "0x2F0",752 IOBase_18 = "0x310",784 IOBase_19 = "0x320",800 IOBase_20 = "0x330",816 IOBase_21 = "0x340",832 IOBase_22 = "0x350",848 IOBase_23 = "0x360",864 IOBase_24 = "0x370",880 IOBase_25 = "0x380",896 IOBase_26 = "0x390",912 IOBase_27 = "0x3A0",928 IOBase_28 = "0x3B0",944 IOBase_29 = "0x3C0",960 IOBase_30 = "0x3D0",976 IOBase_31 = "0x1F0",496 IOBase_32 = "0x3F0",1008 ; Shradha IOBase_33 = "Auto",0 ; ShradhaDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.