;****************************************************************************
;
; OEMSETNT.INF
;
; 3Com 3CXFE574-BT 10/100 LAN PCCard-Fast Ethernet Windows NT Setup File
;
; Copyright 1997 3Com Corporation
;
;****************************************************************************
;
; Revision History
;
; %ver 1.0d
;
; BFC 07/23/97 1.0a Initial Release for Rev.B EtherDisk
; BFC 08/13/97 1.0b Release for Rev.C EtherDisk
; BFC 09/08/97 1.0c Release for Rev.D EtherDisk
; BFC 09/11/97 1.0d Release for Rev.E EtherDisk
;
;****************************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
; EISA
; MCA
; PCI
PCMCIA
"Jazz-Internal Bus"
;ESC Add user option to install Nermal 1.0 or Nermal 2.0 card
[Options]
El3c574 ;Nermal 2.0
;El3c574 ;Nermal 2.0
;El3c574A ;Nermal 1.0
[OptionsTextENG]
El3c574 = "3Com 3CXFE574-BT 10/100 LAN PCCard-Fast Ethernet"
;El3c574 = "FE574B-3Com 10/100 LAN PCCard-Fast Ethernet" ;ESC friendly name
;El3c574A = "3Com 3C574-TX Fast EtherLink PC Card"
[AllFileConstants]
GenericInfVersion = " v1.00"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
ShortcutExe = "uninstall.exe -link"
;TrayIconExe = "comsmd.exe -try"
UninstallExe = "un3c574.exe"
UnInstallName = "3Com PC Card Diagnostics Utilities"
Manufacturer = "3Com"
;ESC Nermal 1.0
[FileConstants-El3c574a]
GenericAdapterName = "3Com 3C574-TX Fast EtherLink PC Card"
GenericDriverName = "3Com 3C574-TX Fast EtherLink PC Card"
GenericSysName = "El574ND3.sys"
GenericName = "El3c574"
ProductMajorVersion = "3"
ProductMinorVersion = "51"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "El3c574"
ProductSoftwareDescription = "3Com 3C574-TX Fast EtherLink PC Card"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "El3c574Sys ndisDriver El3c574Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """El3c574Sys"" yes no container"
NetRuleSoftwareClass = {"El3c574Driver basic"}
NetRuleSoftwareBindable = {"El3c574Driver El3c574Adapter non exclusive 100"}
ProductHardwareName = "El3c574"
ProductHardwareDescription = "3Com 3C574-TX Fast EtherLink PC Card"
NetRuleHardwareType = "El3c574 El3c574Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"El3c574Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VERS1Manufacturer = "3Com"
VERS1Product = "TX Fast EtherLink PC Card"
VERS1Type = "El3c574-FastEtherLink"
PCMCIA = 1
;ESC Nermal 2.0
[FileConstants-El3c574]
GenericAdapterName = "3Com 3CXFE574-BT 10/100 LAN PCCard-Fast Ethernet"
GenericDriverName = "3Com 3CXFE574-BT 10/100 LAN PCCard-Fast Ethernet"
;GenericAdapterName = "FE574B-3Com 10/100 LAN PCCard-Fast Ethernet" ;ESC friendly name
;GenericDriverName = "FE574B-3Com 10/100 LAN PCCard-Fast Ethernet" ;ESC friendly name
;
;
;ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
;GenericSysName = "El574BN4.sys"
;else
;GenericSysName = "El574ND3.sys"
;endif
;
;
GenericName = "El3c574"
ProductMajorVersion = "3"
ProductMinorVersion = "51"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "El3c574"
ProductSoftwareDescription = "3Com 3CXFE574-BT 10/100 LAN PCCard-Fast Ethernet"
;ProductSoftwareDescription = "FE574B-3Com 10/100 LAN PCCard-Fast Ethernet" ;ESC friendly name
;ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "El3c574Sys ndisDriver El3c574Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """El3c574Sys"" yes no container"
NetRuleSoftwareClass = {"El3c574Driver basic"}
NetRuleSoftwareBindable = {"El3c574Driver El3c574Adapter non exclusive 100"}
ProductHardwareName = "El3c574"
ProductHardwareDescription = "3Com 3CXFE574-BT 10/100 LAN PCCard-Fast Ethernet"
;ProductHardwareDescription = "FE574B-3Com 10/100 LAN PCCard-Fast Ethernet" ;ESC friendly name
NetRuleHardwareType = "El3c574 El3c574Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"El3c574Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VERS1Manufacturer = "3Com"
VERS1Product = "Megahertz 574B"
VERS1Type = "El3c574-FastEtherLink"
PCMCIA = 1
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
NT350VersionConstant = "3.50"
NT310VersionConstant = "3.10"
NT400VersionConstant = "(4.0)"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms AllFileConstants
read-syms FileConstants"-"$(Option)
read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms AllFileConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
;ESC Nermal 1.0? Nermal 2.0?
Ifstr(i) $(Option) == el3c574a
set NermalCard = A
else-ifstr(i) $(Option) == el3c574
set NermalCard = B
endif
set NermalCard = B ;RC:for first option.We have only one option displayed
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant)
; Debug-Output "$(InfFile) $(Option): Configureadapter"
set Error = "Windows NT v3.10 is not support by this product"
goto fatal
endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) ;[EsC]
set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL574BN4.SYS"
else
set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL574ND3.SYS"
endif
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
;set IRQValue = *($(IRQList), 5)
set IRQValue = *($(IRQList), 1)
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
; set OptimizationValue = *($(OptimizationList), 3)
set PolarityValue = *($(PolarityList),1)
set LinkValue = *($(LinkList), 1)
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set FileToCheck = $($R1)\OEMSETUP.INF
LibraryProcedure FilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
Ifstr(i) $(FilePresent) != "YES"
Goto installadapter
Endif
Set SrcDir = $($R1)
install "Install-Dll"
; Debug-Output "Install-3nicdiag"
install "Install-3nicdiag"
StartWait
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
; Debug-Output "$(InfFile) $(Option): Windows NT 4.00"
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt
; set TrayIconList = {COMSMDEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)}
; SetRegValue $(KeyNt) $(TrayIconList)
; ; Debug-Output "Install-TraynCpl"
; install "Install-TrayAndCpl"
CloseRegKey $(KeyNt)
RunProgram ExitCode "Windows Directory" "" UN3C574.EXE "-version"
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" $(!REG_KEY_ALL_ACCESS) KeyNt
ifstr $(KeyNt) == ""
CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt
endif
OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2
ifstr $(KeyNt2) == ""
CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt2
endif
set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com PC Card Diagnostics"},+
{UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C574.EXE"}}
Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyNt)
CloseRegKey $(KeyNt2)
endif
EndWait
goto adaptersetup
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
; Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
; Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
; Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
; Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
;Rc
else-ifstr(i) $(ValueName) == "AdapterName"
set OldAdapterName = $(ValueData)
; Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName)
;Rc
; else-ifstr(i) $(ValueName) == "DriverOptimization"
; set OptimizationValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "AutoPolarity"
set PolarityValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "LinkSelection"
set LinkValueIndex = $(ValueData)
endif
EndForListDo
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 5)
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
; set OptimizationValue = *($(OptimizationList), ~($(OptimizationValues),$(OptimizationValueIndex)))
; ifstr(i) $(OptimizationValue) == ""
; set OptimizationValue = *($(OptimizationList), 3)
; endif
set PolarityValue = *($(PolarityList), ~($(PolarityValues),$(PolarityValueIndex)))
ifstr(i) $(PolarityValue) == ""
set PolarityValue = *($(PolarityList), 1)
endif
set LinkValue = *($(LinkList), ~($(LinkValues),$(LinkValueIndex)))
ifstr(i) $(LinkValue) == ""
set LinkValue = *($(LinkList), 1)
endif
adaptersetup = +
;--------------------------------------------------------
;YKF 11-20-98 add for Nermal 2.0 unattended installation
;--------------------------------------------------------
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto skipoptions
endif
;--------------------------------------------------------
;YKF 11-20-98 add for Nermal 2.0 unattended installation
;--------------------------------------------------------
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
set ENABLER = 0
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOBaseAddrIndex = $(Combo1Out)
set IRQValueIndex = $(Combo2Out)
; set OptimizationValueIndex = $(Combo3Out)
set PolarityValueIndex = $(Combo3Out)
set LinkValueIndex = $(Combo4Out)
set ExitButton = $(ButtonPressed)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
set CommonStatus = STATUS_USERCANCEL
ui pop 1
; Debug-Output "Action: unknown. Bye."
goto end
endif
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
; Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
; Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
; Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
; Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
; Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
set BusTypeNum = 1
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error."
goto ShellCodeError
endif
;Nermal 1.5 ;[EsC]
; Debug-Output "$(InfFile) $(Option): Write Pcmcia database"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\3C574-TX Fast EtherLink PC Card" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
; Debug-Output "CreatRegKey (3C574)"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3Com",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3C574-TX Fast EtherLink PC Card",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\3C574-TX Fast EtherLink PC Card" $(MAXIMUM_ALLOWED) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"el3c574"}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
set NewValueList = {{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
; Debug-Output "<DBG> AddValueList - Driver:REG_SZ:el3c574"
CloseRegKey $(MyPcmciaHandle)
;Rc
ifstr $(OldAdapterName) == ""
; Debug-Output "<DBG> setting OldAdapterName"
set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
endif
; Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName)
;Rc
;Nermal 2.0
; Debug-Output "$(InfFile) $(Option): Write Pcmcia database"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 574B" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
; Debug-Output "CreatRegKey (3CCFE574)"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3Com",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"Megahertz 574B",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey ($MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 574B" $(MAXIMUM_ALLOWED) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"el3c574"}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
set NewValueList = {{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
; Debug-Output "<DBG> AddValueList - Driver:REG_SZ:el3c574"
CloseRegKey $(MyPcmciaHandle)
set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
set IOBaseAddrValue = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex)))
; set OptimizationValue = *($(OptimizationValues), ~($(OptimizationList), $(OptimizationValueIndex)))
set PolarityValue = *($(PolarityValues), ~($(PolarityList), $(PolarityValueIndex)))
set LinkValue = *($(LinkValues), ~($(LinkList), $(LinkValueIndex)))
set NewValueList = {{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
; {DriverOptimization, $(NoTitle),$(!REG_VT_DWORD),$(OptimizationValue)},+
{AutoPolarity, $(NoTitle),$(!REG_VT_DWORD),$(PolarityValue)},+
{LinkSelection, $(NoTitle),$(!REG_VT_DWORD),$(LinkValue)},+
{MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+
{CardType, $(NoTitle),$(!REG_VT_DWORD),0},+
{AdapterType, $(NoTitle),$(!REG_VT_DWORD),259},+
{OSType, $(NoTitle),$(!REG_VT_DWORD),1},+
;Rc
;{Pcmcia, $(NoTitle),$(!REG_VT_DWORD),1},+
{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)}}
;Rc
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
;--------------------------------------------------------
;YKF 11-20-98 add for Nermal 2.0 unattended installation
;--------------------------------------------------------
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
;--------------------------------------------------------
;YKF 11-20-98 add for Nermal 2.0 unattended installation
;--------------------------------------------------------
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
; Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
; Debug-Output "$(InfFile) $(Option): Windows NT 4.00 remove icon"
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt
set TrayIconList = COMSMDEXE
DeleteRegValue $(KeyNt) $(TrayIconList)
CloseRegKey $(KeyNt)
endif
RunProgram ExitCode "Windows Directory" "" UN3C574.EXE "-inf"
goto end
UpgradeSoftware = +
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
ifint $(Version) != $(ProductVersion)
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
else
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
endif
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMSETUP.INF"
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)NDIS $(!STF_WINDOWSSYSPATH)\drivers ;[EsC]
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;AddSectionFilesToCopyList Files-help $(SrcDir)Help $(!STF_WINDOWSPATH)
AddSectionFilesToCopyList Files-3nicdiag $(SrcDir)Win32 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH)
;AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)NDIS $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll$(NermalCard) $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-3nicdiag]
set STF_VITAL = ""
;AddSectionFilesToCopyList Files-help $(SrcDir)Win32 $(!STF_WINDOWSPATH)
AddSectionFilesToCopyList Files-3nicdiag $(SrcDir)Win32 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-TrayAndCpl]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-TrayAndCpl $(SrcDir)Win32 $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Source Media Descriptions]
1 = "Windows NT Setup Disk #1"
2 = "3Com Megahertz 10/100 LAN PC Card Installation Disk"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, OEMSETUP.INF, SIZE=40000, RENAME=$(!UG_Filename)
[Files-Dlla]
2, El3c574a.DLL, SIZE=50000
[Files-Dllb]
2, El3c574.DLL, SIZE=50000
;[Files-help]
;2,help574b.htm, SIZE=50000
[Files-3nicdiag]
;2,3nicdiag.exe, SIZE=300000
;2,3nicdiag.hlp, SIZE=50000
;2,3varaddr.txt, SIZE=1000
2,un3c574.exe, SIZE=120000
[Files-HwDll]
;2,hwaccess.dll, SIZE=90000
;2,pcomdrv.sys, SIZE=9000
;2,3c574cfg.dll, SIZE=90000
[Files-TrayAndCpl]
;2,comsmd.exe, SIZE=10000
[Files-El3c574a]
2,El574BN4.SYS, SIZE=60000
2,El574ND3.SYS, SIZE=60000
[Files-El3c574]
2,El574BN4.SYS, SIZE=60000
2,El574ND3.SYS, SIZE=60000
[LanguagesSupported]
ENG
[AllFileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
;DialogDllName = "El3c574.DLL"
[FileConstantsENG-El3c574a]
DialogDllName = "El3c574A.DLL"
FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
InterruptStyleValues = ^(InterruptStyleChoices, 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
PolarityList = ^(PolarityChoices, 1)
PolarityValues = ^(PolarityChoices, 2)
[FileConstantsENG-El3c574]
DialogDllName = "El3c574.DLL"
FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
InterruptStyleValues = ^(InterruptStyleChoices, 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
;OptimizationList = ^(OptimizationChoices, 1)
;OptimizationValues = ^(OptimizationChoices, 2)
PolarityList = ^(PolarityChoices, 1)
PolarityValues = ^(PolarityChoices, 2)
LinkList = ^(LinkChoices, 1)
LinkValues = ^(LinkChoices, 2)
[DialogConstantsENG-El3c574a]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[DialogConstantsENG-El3c574]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG-El3c574a]
DlgType = "RadioCombination"
DlgTemplate = "El3c574"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO}
Combo1Label = "I/O Port:"
Combo2Label = "Interrupt:"
Combo3Label = "Auto Polarity:"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(IRQList)
Combo2Out = $(IRQValue)
Combo3List = $(PolarityList)
Combo3Out = $(PolarityValue)
ComboListItemsIn = {Combo1List,Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out,Combo2Out, Combo3Out}
EditTextIn = {"",""}
EditTextLim = {"",""}
[IRQChoices]
IRQ_0 = "Auto",0
IRQ_1 = "3",3
IRQ_2 = "5",5
IRQ_3 = "7",7
IRQ_4 = "9",9
IRQ_5 = "10",10
IRQ_6 = "11",11
IRQ_7 = "12",12
IRQ_8 = "15",15
[IOBaseAddrChoices]
IOBase_0 = "Auto",0
IOBase_1 = "0x300",768
IOBase_2 = "0x200",512
IOBase_3 = "0x210",528
IOBase_4 = "0x220",544
IOBase_5 = "0x230",560
IOBase_6 = "0x1E0",480
IOBase_7 = "0x250",592
IOBase_8 = "0x260",608
IOBase_9 = "0x270",624
IOBase_10 = "0x280",640
IOBase_11 = "0x290",656
IOBase_12 = "0x2A0",672
IOBase_13 = "0x2B0",688
IOBase_14 = "0x2C0",704
IOBase_15 = "0x2D0",720
IOBase_16 = "0x2E0",736
IOBase_17 = "0x2F0",752
IOBase_18 = "0x310",784
IOBase_19 = "0x320",800
IOBase_20 = "0x330",816
IOBase_21 = "0x340",832
IOBase_22 = "0x350",848
IOBase_23 = "0x360",864
IOBase_24 = "0x370",880
IOBase_25 = "0x380",896
IOBase_26 = "0x390",912
IOBase_27 = "0x3A0",928
IOBase_28 = "0x3B0",944
IOBase_29 = "0x3C0",960
IOBase_30 = "0x3D0",976
IOBase_31 = "0x1F0",496
IOBase_32 = "0x3F0",1008
[PolarityChoices]
Polarity_1 = "Enabled",0
Polarity_2 = "Disabled",32
[FileDependentDlgENG-El3c574]
DlgType = "RadioCombination"
DlgTemplate = "El3c574"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO}
Combo1Label = "I/O Port:"
Combo2Label = "Interrupt:"
;Combo3Label = "Driver Optimization:"
Combo3Label = "Auto Polarity:"
Combo4Label = "Network Link Selection:"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(IRQList)
;Combo3List = $(OptimizationList)
Combo3List = $(PolarityList)
Combo4List = $(LinkList)
Combo1Out = $(IOBaseAddrValue)
Combo2Out = $(IRQValue)
ComboListItemsIn = {Combo1List,Combo2List}
ComboListItemsOut = {Combo1Out,Combo2Out}
;Combo3Out = $(OptimizationValue)
Combo3Out = $(PolarityValue)
Combo4Out = $(LinkValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out}
EditTextIn = {"",""}
EditTextLim = {"",""}
[IRQChoices]
IRQ_0 = "Auto",0
IRQ_1 = "3",3
IRQ_2 = "5",5
IRQ_3 = "7",7
IRQ_4 = "9",9
IRQ_5 = "10",10
IRQ_6 = "11",11
IRQ_7 = "12",12
IRQ_8 = "15",15
[IOBaseAddrChoices]
IOBase_0 = "Auto",0
IOBase_1 = "0x300",768
IOBase_2 = "0x200",512
IOBase_3 = "0x210",528
IOBase_4 = "0x220",544
IOBase_5 = "0x230",560
IOBase_6 = "0x1E0",480
IOBase_7 = "0x250",592
IOBase_8 = "0x260",608
IOBase_9 = "0x270",624
IOBase_10 = "0x280",640
IOBase_11 = "0x290",656
IOBase_12 = "0x2A0",672
IOBase_13 = "0x2B0",688
IOBase_14 = "0x2C0",704
IOBase_15 = "0x2D0",720
IOBase_16 = "0x2E0",736
IOBase_17 = "0x2F0",752
IOBase_18 = "0x310",784
IOBase_19 = "0x320",800
IOBase_20 = "0x330",816
IOBase_21 = "0x340",832
IOBase_22 = "0x350",848
IOBase_23 = "0x360",864
IOBase_24 = "0x370",880
IOBase_25 = "0x380",896
IOBase_26 = "0x390",912
IOBase_27 = "0x3A0",928
IOBase_28 = "0x3B0",944
IOBase_29 = "0x3C0",960
IOBase_30 = "0x3D0",976
IOBase_31 = "0x1F0",496
IOBase_32 = "0x3F0",1008
;[OptimizationChoices]
;Optimization_1 = "DOS Client",16
;Optimization_2 = "Windows & OS/2 Client",32
;Optimization_3 = "Server",48
[PolarityChoices]
Polarity_1 = "Enabled",0
Polarity_2 = "Disabled",32
[LinkChoices]
Link_1 = "Auto Negotiation",512
Link_2 = "100 BTX Full Duplex",256
Link_3 = "100 BTX Half Duplex",128
Link_4 = "10 BT Full Duplex",64
Link_5 = "10 BT Half Duplex",32
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.