;***********************************************************************
;
; OEMSETUP.INF
;
; Airont PC4800 LAN Adapter Setup for NT 4.0/3.51
;
; History:
; 09/28/97 Initial version written by Ned Nassar
;
;*******************************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCMCIA
PCI
[Options]
PC4800
PCI4800
ISA4800
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Aironet"
ProductMajorVersion = "1"
ProductMinorVersion = "00"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "PC4800"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\PCX500.sys"
NetRuleSoftwareType = "PC4800Sys ndisDriver PC4800Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """PC4800Sys"" yes no container"
NetRuleSoftwareClass = {"PC4800Driver basic"}
NetRuleSoftwareBindable = {"PC4800Driver PC4800Adapter non exclusive 100"}
ProductHardwareName = "PC4800"
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
FunctionTitle = "Aironet PC4800 Wireless LAN Adapter Setup"
ProductSoftwareDescription = "Aironet PC4800 Wireless LAN Adapter Driver"
ProductSoftwareTitle = "Aironet PC4800 Wireless LAN Adapter Driver"
;
NetRuleHardwareType = "PC4800 PC4800Adapter"
NetRuleHardwareClass = {"PC4800Adapter basic"}
;;---------
PCI4800CFID = 18432 ;; 0x4800
CFID = 18432 ;; 0x4800
Vendor = 5305 ;; 14B9 i;;---------
ProductHardwarePCI4800Title = "Aironet PC4800 PCI Wireless LAN Adapter"
ProductHardwarePCI4800Description = "Aironet PC4800 PCI Wireless LAN Adapter"
NetRuleHardwarePCI4800Type = "PC4800 PC4800Adapter"
NetRuleHardwarePCI4800Class = {"PC4800Adapter basic"}
AdapterPCI4800Type = 5 ;; PCI board
;;--------
ProductHardwarePC4800Title = "Aironet PC4800 PCI Wireless LAN Adapter"
ProductHardwarePC4800Description = "Aironet PC4800 PCI Wireless LAN Adapter"
NetRuleHardwarePC4800Type = "PC4800 PC4800Adapter"
NetRuleHardwarePC4800Class = {"PC4800Adapter basic"}
AdapterPC4800Type = 8 ;; PCI board
;;--------
ProductHardwareISA4800Title = "Aironet PC4800 ISA Wireless LAN Adapter"
ProductHardwareISA4800Description = "Aironet PC4800 ISA Wireless LAN Adapter"
NetRuleHardwareISA4800Type = "PC4800 PC4800Adapter"
NetRuleHardwareISA4800Class = {"PC4800Adapter basic"}
AdapterISA4800Type = 8 ;; PCI board
;;--------
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = a:\
NT350VersionConstant = "3.50"
NT310VersionConstant = "3.10"
; NDIS4FOLDER = NDIS4
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
;
Ifcontains(i) $($0) in $(LanguageList)
;
ifstr(i) $($1) == ""
goto returnoptions
endif
;
set PlatformList = ^(PlatformsSupported, 1)
;
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
;
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;------------------------------------------------------------------------------
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
;------------------------------------------------------------------------------
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1 ;REN REN REN
set LanguageList = ^(LanguagesSupported, 1)
;
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
;
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
;
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
;
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
set PCMCIA = 0
set PCI = 0
set PNPISA = 0
set DialogDllName = "pcx500.dll"
Ifstr(i) $($1) == "PC4800"
set CardOption = "PCMCIA4800"
set DLLBUSTYPE = 8
set PCMCIA = 1
set BusInterfaceType = 1 ;; needs (ISA) for PCMCIA under nt 4.0/3.51
set CardType = 3
set FormFactorValue = "PCMCIA"
set to = Begin
set from = Begin
else-Ifstr(i) $($1) == "PCI4800"
set CardOption = "PCI4800"
set DLLBUSTYPE = 5
set PCI = 1
set BusInterfaceType = 5
set CardType = 2
set FormFactorValue = "PCI"
else-Ifstr(i) $($1) == "ISA4800"
set CardOption = "ISA4800"
set DLLBUSTYPE = 1
set ISA = 1
set BusInterfaceType = 1
set CardType = 1
set FormFactorValue = "ISA"
endif
;
EndWait
;------------------------------------------------------------------------------
Begin = +
Set ActivateDetection = FALSE
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) ;; NT v3.10 not supported!
Debug-Output "$(InfFile) $(Option): Configureadapter"
set Error = "Windows NT v3.10 is not support by this product"
goto fatal
endif
;
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
;
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
;
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
;
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
; set ActivateDetection = TRUE
set StartLabel = configureadapter
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the PC4800 driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
;
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
; set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
;
Debug-Output "PC4800.INF: =================================================="
Debug-Output "PC4800.INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "PC4800.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "PC4800.INF: Option is: "$(Option)
Debug-Output "PC4800.INF: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "PC4800.INF: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "PC4800.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "PC4800.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "PC4800.INF: =================================================="
; set the default values
;
;
set ATTRIBMEMSIZE = 0x0400
set COMNMEMSIZE = 0x0000
Shell "" DebugConfiguration "After parameter default setting"
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;------------------------------------------------------------------------------
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else ; Adding a new adapter is no problem, so don't bug the user
; Shell $(UtilityInf), CardExistedDlg
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error: cannot get an error string."
; goto ShellCodeError
; endif
; ifstr(i) $($R1) != "OK"
; set CommonStatus = STATUS_USERCANCEL
; goto end
; endif
set OldVersionExisted = $(TRUE)
endif
endif
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
;
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
;
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
;
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
;------------------------------------------------------------------------------
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
;
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
;
Endif
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
;
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "PC4800.INF: FindService shell failure"
Goto ShellCodeError
Endif
;
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "PC4800.INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
;
Set KeyParameters = $($R2)
CloseRegKey $($R1)
;
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
;
;------------------------------------------------------------------------------
adaptersetup = +
Shell "" DebugConfiguration "before displaying dialog"
Set from = adapteroptions
adapteroptions = +
LoadLibrary "" $(!STF_WINDOWSSYSPATH)\$(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)
;;;------------------------------------------new
Ifstr(i) $(StartLabel) == configureadapter
Debug-Output "adaptersetup:configureadapter"
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
;
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "SoftexPcmcia"
set SoftexPcmcia = $(ValueData)
endif
ifstr(i) $(ValueName) == "FormFactor"
ifstr(i) $(ValueData) == "ISA"
set CardOption = "ISA4800"
else-ifstr(i) $(ValueData) == "PCI"
set CardOption = "PCI4800"
else
set CardOption = "PCMCIA4800"
endif
LibraryProcedure Result $(hLib) SetCardOption $(CardOption)
endif
EndForListDo
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
endif
Debug-Output "SetValue---> "$(ValueName)" = "$(ValueData)
LibraryProcedure Result $(hLib) SetValue $(ValueName) $(ValueData)
EndForListDo
LibraryProcedure Result $(hLib) AdapterReconfig $(CardOption)
else
LibraryProcedure Result $(hLib) AdapterSetup $(CardOption)
Endif
ifint $(PCI) != 1
LibraryProcedure IoBaseAddressValue $(hLib) GetValue IoBaseAddress
LibraryProcedure IRQValue $(hLib) GetValue InterruptNumber
endif
;
LibraryProcedure InfrastructureModeValue $(hLib) GetValue InfrastructureMode
LibraryProcedure PSPValue $(hLib) GetValue PowerSaveMode
LibraryProcedure SuppRatesValue $(hLib) GetValue SupportedRates,
LibraryProcedure SSIDValue1 $(hLib) GetValue SSID1
LibraryProcedure NetworkAddressValue $(hLib) GetValue NetworkAddress
LibraryProcedure NodeNameValue $(hLib) GetValue NodeName
;
Debug-Output "PcmciaDriverValue"
LibraryProcedure PcmciaDriverValue $(hLib) IsSoftexPcmcia
;;;-------------------------------------------end of new
FreeLibrary $(hLib)
;
ifstr(i) $(Result) == "CONTINUE"
Debug-Output "CONTINUE"
else-ifstr(i) $(Result) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
goto end
else
goto end
endif
ifint $(PCMCIA) == 0
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
goto installnonpcmcia
endif
;
;------------------------------------------------------------------------------
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
;
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
;
endif
;
StartWait
;
ifint $(OldVersionExisted) == $(FALSE)
;
ifstr(i) $(!NTN_InstallMode) == "install"
;
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
;
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
set Error = $($R0)
Goto fatal
;
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
;
Set SrcDir = $($R1)
Endif
install "Install-Option"
;
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
set Error = $($R0)
goto fatal
endif
endif
;
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&"
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
;
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
;
endif
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
;
CloseRegKey $(KeyAdapterRules)
goto writeparameters
;-------------------------------------------------------------------------------
; Set MemSizeValue = 8192
; Set MemOffsetValue = 0
; Set AttributeMemSize = 128
; Set AttributeMemAddress = 851968
; Set AttributeMemOffset = 0
writeparameters = +
set CardType = 3
Set NewValueList = {+
{BusType, $(NoTitle),$(!REG_VT_DWORD), $(BusInterfaceType)},+
{CardType, $(NoTitle),$(!REG_VT_DWORD), $(CardType)},+
{FormFactor, $(NoTitle),$(!REG_VT_SZ), $(FormFactorValue)},+
{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD), $(IoBaseAddressValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD), $(IRQValue)},+
{InfrastructureMode,$(NoTitle),$(!REG_VT_DWORD), $(InfrastructureModeValue)},+
{PowerSaveMode, $(NoTitle),$(!REG_VT_DWORD), $(PSPValue)},+
{SupportedRates, $(NoTitle),$(!REG_VT_DWORD), $(SuppRatesValue)},+
{SSID1, $(NoTitle),$(!REG_VT_SZ), $(SSIDValue1)},+
{NetworkAddress, $(NoTitle),$(!REG_VT_SZ), $(NetworkAddressValue)},+
{NodeName, $(NoTitle),$(!REG_VT_SZ), $(NodeNameValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
ifint $(PCMCIA) == 0
goto successful
endif
;;ifint $(SoftexPcmcia) == 1
;; Set NewValueList = {+
;; {SoftexPcmcia, $(NoTitle),$(!REG_VT_DWORD), $(PCMCIA)}}
;;else
;; Set NewValueList = {+
;; {Pcmcia, $(NoTitle),$(!REG_VT_DWORD), $(PCMCIA)}}
;;endif
;;;;Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
;----------------------
Set NewValueList = {+
{$(PcmciaDriverValue), $(NoTitle),$(!REG_VT_DWORD), $(PCMCIA)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
;----------------------
;;Set NewValueList = {+
;; {SoftexPcmcia, $(NoTitle),$(!REG_VT_DWORD), $(PCMCIA)}}
;;Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
;++++++++++++++++++++++
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;++++++++++++++++++++++
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
;
set PCMCIADatabaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
Debug-Output "Opening PCMICA database key "$(PCMCIADatabaseKeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseKey
;
ifstr $(PCMCIADatabaseKey) == $(NULL)
Debug-Output "Pcmcia\DataBase not present"
else ; PCMCIA.sys is installed and registry has database section in it.
; Try to open Aironet section. Delete it if found
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName)"\Aironet" $(MAXIMUM_ALLOWED) PCMCIADatabaseAironetKey
ifstr $(PCMCIADatabaseAironetKey) != $(NULL) ;
;-----------------------------------------------------------------------------------------------
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseAironetKey)"\PC4800" $(MAXIMUM_ALLOWED) PCMCIADatabaseAironetPC4800Key
ifstr $(PCMCIADatabaseAironetPC4800Key) != $(NULL) ; open succeeded, so delete it
CloseRegKey $(PCMCIADatabaseAironetPC4800Key)
DeleteRegTree $(PCMCIADatabaseAironetKey) "PC4800" ; bye bye!
endif
CreateRegKey $(PCMCIADatabaseAironetKey) {"PC4800", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseAironetPC4800Key
SetRegValue $(PCMCIADatabaseAironetPC4800Key) {Driver, 0, $(!REG_VT_SZ),"PC4800"}
SetRegValue $(PCMCIADatabaseAironetPC4800Key) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
CloseRegKey $(PCMCIADatabaseAironetPC4800Key)
;-----------------------------------------------------------------------------------------------
CloseRegKey $(PCMCIADatabaseAironetKey)
;DeleteRegTree $(PCMCIADatabaseKey) "Aironet" ; bye bye!
;endif
else
CreateRegKey $(PCMCIADatabaseKey) {"Aironet", 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIADatabaseAironetKey
CreateRegKey $(PCMCIADatabaseAironetKey) {"PC4800", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseAironetPC4800Key
SetRegValue $(PCMCIADatabaseAironetPC4800Key) {Driver, 0, $(!REG_VT_SZ),"PC4800"}
SetRegValue $(PCMCIADatabaseAironetPC4800Key) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
CloseRegKey $(PCMCIADatabaseAironetPC4800Key)
CloseRegKey $(PCMCIADatabaseAironetKey)
endif
CloseRegKey $(PCMCIADatabaseKey)
;
;
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
;
CloseRegKey $(KeyParameters)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
;
EndWait
goto successful
;-------------------------------------------------------------------------------
;;installproduct =+
installnonpcmcia = +
Debug-Output "$(InfFile) $(Option): installproduct"
StartWait
set AdapterList = $($R1)
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
;
; Check to see if the Product Software key exists already in the system service keys
; before we try to add the software component.
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt
CloseRegKey $(KeyNt)
Ifstr(i) $(KeyNt) == ""
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif ;; Does Services\PC4800 exist?
;;***************************************************************************************************
;; If we are eisa, then use the EISA Enum routines to figure out how many boards we have in
;; the system.
;;
;; If we are PCI and we are v3.51 and above, we can use the PCI dection routines to figure
;; out where all the boards are (hopefully including different buses) and generate the correct
;; reg. entries.
;;
;;***************************************************************************************************
;;
;; Are we installing an ISA , PCI or PCMCIA
;;
set NTDetected = $(FALSE)
ifint $(ISA) == 1
;;ISA_BEGIN..........................................................................
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO" ;; Don't want to re-install, it's there already
endif
ifstr(i) $(InstallCard) == "NO"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
goto copyInstallationFiles
endif
;------------------------------------------------------------------------
Debug-Output "$(InfFile) $(Option): Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
;Set HardParameterKey = $($R3)
Set KeyParameters = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
;
Set NewValueList = {+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
}
Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)"
;;Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "$(InfFile) $(Option): HardwareRuleKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
goto copyInstallationFiles
;;ISA_END..........................................................................
else-ifint $(PCI) == 1
;;
;; No, Then we must be installing a PCI card.
;;
;; Note: If we are are on WinNT v3.51 and above, we have PCI detection support
;; and are able to setup the adapter without user intervention. Otherwise, we can
;; only do one card at a time.
;;
set TargetVersion = *($(CurrentVersionValue),4)
Debug-Output "$(InfFile) $(Option): Current Version:"$(TargetVersion)
ifstr $(TargetVersion) == $(NT350VersionConstant) ;; We need to ask on v3.50
Debug-Output "Running on WindowsNT 3.50"
set Version350 = $(TRUE)
else
Debug-Output "Running on WindowsNT 3.51"
set Version350 = $(FALSE)
endif
ifint $(Version350) == $(TRUE)
Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!"
ifstr $(!STF_GUI_UNATTENDED) == "YES"
Debug-Output "$(InfFile) $(Option): Running in GUI unattended mode"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 5
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
set NTDetected = $(FALSE)
set AdapterList = $(Option) ;; 1 Item to install
Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)"
Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)"
else
Debug-Output "$(InfFile) $(Option): Running 3.50 Bus Dialog"
set BusInterfaceType = 5
set BusNumber = 0
set NTDetected = $(FALSE)
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
set AdapterList = $(Option) ;; 1 Item to install
Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)"
Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)"
endif
else
Debug-Output "$(InfFile) $(Option): Running 3.51 using PCI Dectection"
;;
;; v3.51 has PCI detection code built in.
;;
;;set BusInterfaceType = 5
;;set BusNumber = 0
;; Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
set NTDetected = $(TRUE)
Debug-Output "$(InfFile) $(Option): VendorID = $(Vendor)"
Debug-Output "$(InfFile) $(Option): CFID = $(CFID)"
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
Debug-Output "DetectedBusNum: "*($($),1)
Debug-Output "DetectedSlotNum:"*($($),2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) == {}
;;;----
Shell $(UtilityInf), GetPCIInformation, $(Vendor) 1 ;;generic id
ifstr(i) $($R0) == {}
;;;----
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
endif
set AdapterList = $($R0)
endif ;;; NT v3.50
endif ;;; Looking for PCI cards in Option.
; "AdapterList" has the list of currently installed adatpers in the system!
;
Debug-Output "$(InfFile) $(Option): Adapterlist = $(AdatperList)"
ForListDo $(AdapterList)
Set InstallCard = "YES"
ifint $(NTDetected) == $(TRUE)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
Debug-Output "$(InfFile) $(Option): DetectedBusNumber = $(DetectedBusNum)"
Debug-Output "$(InfFile) $(Option): DetectedSlotNum = $(DetectedSlotNum)"
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO" ;; Don't want to re-install, it's there already
endif
endif
;;
;; Are we installing the card?
;;
ifstr(i) $(InstallCard) == "NO"
Debug-Output "$(InfFile) $(Option): Card Already at $(DetectedBusNum):$(DetectedSlotNum) already installed!"
set Error = "An adapter at $(DetectedBusNum):$(DetectedSlotNum) is already installed!"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
else
Debug-Output "$(InfFile) $(Option): Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
;Set HardParameterKey = $($R3)
Set KeyParameters = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
; Are we installing ISA, PCI, PCMCIA?
;
ifint $(ISA) == 1
set CardType = 1
set BusTypeNum = 1
set Bus = "ISA"
else-ifint $(PCI) == 1
set CardType = 2
set BusTypeNum = 5
set Bus = "PCI"
endif
;;
;; If we used the OS to dected the card, then we already know bus and slot information.
;;
ifint $(NTDetected) == $(TRUE)
set BusNumber = $(DetectedBusNum)
set SlotNum = $(DetectedSlotNum)
set BusInterfaceType = $(BusTypeNum)
;
; Note: we need to record SlotNumber too so that we can use the
; "IsNetCardAlreadyInstalled" routine.
;
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}+
}
;;Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
else
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
}
;;Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
Set NewValueList = {+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
}
Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)"
;;Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "$(InfFile) $(Option): HardwareRuleKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
endif
EndForListDo
EndWait
;---------------------------------------------------------------------------
;;ISA_BEGIN.............
copyInstallationFiles =+
;;ISA_END...............
;---------------------------------------------------------------------------
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
;;ISA_BEGIN.....................
ifstr(i) $(!NTN_InstallMode) == "install"
goto writeparameters
endif
;;ISA_END.......................
endif
;
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
goto writeparameters
endif
;-------------------------------------------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-------------------------------------------------------------------------------
removeadapter = +
Debug-Output "-------------------removeadapter-----------------------"
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
;
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
;
Endif
;
Shell $(UtilityInf) FindService, $(KeyProduct)
;
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "PC4800.INF: FindService shell failure"
Goto ShellCodeError
Endif
;
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "PC4800.INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
;
Set KeyParameters = $($R2)
CloseRegKey $($R1)
;
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
Set from = adapteroptions
LoadLibrary "" $(!STF_WINDOWSSYSPATH)\$(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
;
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "FormFactor"
ifstr(i) $(ValueData) == "ISA"
set FormFactor = "ISA"
else-ifstr(i) $(ValueData) == "PCI"
set FormFactor = "PCI"
else
set FormFactor = "PCMCIA"
endif
endif
EndForListDo
Debug-Output "+++++++++++++++++removeadapter+++++++++++++++++"
Debug-Output ""
Debug-Output "FormFactor= "$(FormFactor)
Debug-Output "ProductKeyName= "$(ProductKeyName)
Debug-Output "NTN_RegBase= "$(!NTN_RegBase) ; \\\\NetworkCard\1
Debug-Output ""
Debug-Output "=============removeadapter====================="
;; LibraryProcedure Result $(hLib) RemoveAdapterSetVars "PC4800" $(FormFactor) $(!NTN_RegBase)
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
;
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
;; LibraryProcedure Result $(hLib) RemoveAdapterRemoveKeys
goto end
;-------------------------------------------------------------------------------
UpgradeSoftware = +
; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
; Ifstr $(KeyProduct) != $(KeyNull)
; install "Install-Update"
; ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
; goto fatal
; endif
; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
; SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
; CloseRegKey $(KeyProduct)
; else
; goto fatalregistry
; endif
; goto end
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
;
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
set !UG_Filename = $($R0)
;
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
;
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$( roductMinorVersion)}
ifint $(Version) != $(ProductVersion)
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
;
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
;
Ifstr(i) $(NetRuleKey) != $(KeyNull)
else
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
;
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
endif
endif
goto end
;
;-------------------------------------------------------------------------------
;
successful = +
goto end
;
;-------------------------------------------------------------------------------
;
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
;
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
;
EndForListDo
;
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
;-------------------------------------------------------------------------------
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
;-------------------------------------------------------------------------------
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
;
;-------------------------------------------------------------------------------
;
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
;
;-------------------------------------------------------------------------------
;
nonfatalmsg = +
;
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
;
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
;-------------------------------------------------------------------------------
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
set Error = $($R0)
goto fatal
;
;-------------------------------------------------------------------------------
;
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
;-------------------------------------------------------------------------------
;
fatal = +
;
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
set Error = $($R0)
endif
;
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
goto setfailed
;
;-------------------------------------------------------------------------------
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
;
ui start "Error Message"
goto setfailed
;
;-------------------------------------------------------------------------------
;
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
;
;-------------------------------------------------------------------------------
;
end = +
goto term
;
;-------------------------------------------------------------------------------
;
term = +
Return $(CommonStatus)
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[DebugConfiguration]
Set InfName = "PC4800.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
return
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;;>>;;AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; I change this line JVZ
; AddSectionFilesToCopyList Files-Sys $(SrcDir)$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
;
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
;
Exit
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;;>>;;AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
;I change this line JVZ
; AddSectionFilesToCopyList Files-Sys $(SrcDir))$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
Debug-Output "Add files in [Files-Inf] "
;;>>;;AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
;I change this line JVZ
; AddSectionFilesToCopyList Files-Inf $(SrcDir)$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
exit
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[Install-Dll]
set STF_VITAL = ""
;;>>;;AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
;I change this line JVZ
; AddSectionFilesToCopyList Files-Dll $(SrcDir)$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[Source Media Descriptions]
1 = "Aironet PC4800 Setup Disk for NT"
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[Files-Inf]
1,oemsetup.inf,SIZE=32044, RENAME=$(!UG_Filename)
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[Files-Sys]
1, PCX500.SYS, SIZE=94988
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[Files-Dll]
1, pcx500.dll, SIZE=17408
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[LanguagesSupported]
ENG
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[OptionsTextENG]
PC4800 = "Aironet PC4800 PCMCIA Wireless LAN Adapter"
PCI4800 = "Aironet PC4800 PCI Wireless LAN Adapter"
ISA4800 = "Aironet PC4800 ISA Wireless LAN Adapter"
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[FileConstantsENG]
;
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "Aironet PC4800 Lan Adapter Card Setup"
ProductSoftwareDescription = "Aironet PC4800 PCMCIA Adapter Driver"
ProductHardwarePC4800Description= "Aironet PC4800 PCMCIA Adapter"
ProductSoftwareTitle = "Aironet PC4800 PCMCIA Adapter Driver"
ProductHardwarePC4800Title = "Aironet PC4800 PCMCIA Adapter"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
DialogDllName = "pcx500.dll"
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
;
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
;
;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[FileDependentDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "PC4800"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO}
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.