=================================================================== Lucent Technologies Winter 2001 NDIS 4 Miniport Driver for NT4 with Softex. Variant 2 Version: 6.30 =================================================================== This README.TXT covers information that was not yet known or available when the user documentation shipped with this product was written. It includes update information, additional installation instructions, limitations to the current version of the product, and suggestions to solve known issues or problems. TABLE OF CONTENTS. 1. SOFTWARE DESCRIPTION 2. SYSTEM REQUIREMENTS 3. NEW IN THIS RELEASE 4. INSTALLATION NOTES 5. TECHNICAL CONSTRAINTS 6. KNOWN ISSUES 7. TECHNICAL SUPPORT ------------------------------------------------------------------- 1. SOFTWARE DESCRIPTION 1.1 About this software This Driver supports the following network interface cards: * ORiNOCO PC Card (Silver and Gold) * WaveLAN/IEEE Turbo 11 Mb Card * WaveLAN/IEEE Turbo Card (8 Mb) * WaveLAN/IEEE PC Card (2 Mb) 1.2 Files Installed The following files will be installed in the Windows designated directory: NDIS 4 Miniport driver for Windows NT4 version 6.28 WLLUC52.SYS OEMSETUP.INF WCLUC52.EXE WNLUC52.CPL WLLUC.CNT WNLUC.HLP README.TXT ------------------------------------------------------------------- 2. SYSTEM REQUIREMENTS 2.1 Operating System This Driver is for the Microsoft Windows NT4 Operating System with the Softex PC Card software. ------------------------------------------------------------------- 3. NEW IN THIS RELEASE 3.1 Version 6.28 Winter 2001 NOTE: THIS VERSION OF THE DRIVER REQUIRES THE STATION FUNCTIONS FIRMWARE TO BE VERSION 6.04 (OR HIGHER). It is not compatible with older versions. * Added functionality for enabling/disabling radio from the Client Manager * Putting 'ANY' in a peer-to-peer profile gives a apropriate warning. * Profiles can now be selected trough the keyboard. 3.2 Version 6.14 June 2000 NOTE: THIS VERSION OF THE DRIVER REQUIRES THE STATION FUNCTIONS FIRMWARE TO BE VERSION 6.04 (OR HIGHER). It is not compatible with older versions. * ORiNOCO name change. * New control panel (Card Settings program). * Configuration profiles are qualified for network type: - Access Point (WavePOINT-II or other party 802.11 AP). - Residential Gateway (RG-1000). - Peer-to-Peer Group (IEEE 802.11 IBSS; network without AP). This causes further configuration screens (tabs) to be adapted accordingly. * The "Ad-Hoc Demo Mode" can no longer be selected through the Card Settings program. This to avoid confusion with the Peer-to-Peer Group (IBSS) mode, and to discourage the use of this non-interoperable mode of operation. For special applications (e.g. research, or compatibility with other / previous WaveLAN/IEEE products), it can still be configured by editing the Registry. * The "Advanced" tab has been split into an "Advanced" tab and an "Admin" tab, to more clearly indicate that this information is to be provided by the network administrator. These tab-screens have been reworded, and check-boxes have been replaced by radio-buttons. 3.3 Version 6.00 March 2000 NOTE: THIS VERSION OF THE DRIVER REQUIRES THE STATION FUNCTIONS FIRMWARE TO BE VERSION 6.04 (OR HIGHER). It is not compatible with older versions. * Configuration via Control Panel Applet. * Support for multiple configuration profiles. * Microwave Oven Robustness parameter added. * "AP Density" parameter renamed to "Distance between APs". * Station Name taken from Windows Network Computer Name. 3.4 Version 4.00 July 1999 * The software now supports data encryption via the Wired Equivalent Privacy (WEP) algorithm. - The WEP function allows you to enable or disable encryption of all data traffic, and to specify up to four keys for encryption/decryption. One key will be assigned as dedicated encrypt key. - This function should only be anabled when you are using WaveLAN SILVER cards; BRONZE or WHITE cards will not support encryption in hardware. - When enabling WEP, make sure your SILVER card has firmware level 4.08 or higher. If neccessary, update your cards with a firmware update utility (e.g. WSU10408) - A total system with encryption also requires a WavePOINT installation with a SILVER card and with WEP enabled and with matching encryption keys. This requires WavePOINT AP software level 4.0 or higher. * This software can be run on all previously released versions of WaveLAN/IEEE Cards. ------------------------------------------------------------------- 4. INSTALLATION NOTES 4.1 Standard Installation Please refer to the 'Getting Started Guide' or 'User's Guide' that came with your product. ------------------------------------------------------------------- 5. TECHNICAL CONSTRAINTS 5.1 Compatibility with Station Functions Firmware on the Card. This version of the driver requires the Station Functions firmware on the Card to be version 6.04 or higher. ------------------------------------------------------------------- 6. KNOWN ISSUES 6.1 ORiNOCO Add/Edit profile does not appear upon installation The ORiNOCO driver requires Windows NT Service Pack 4 or higher. In case you are running SP3 or lower, your Windows NT system does not provide the Windows system DLLs required to make the Add/Edit profile window work. You can resolve this error by either: * Installing Microsoft Windows NT Service Pack 4 or higher (SP 6 is recommended), * (Re-)installing the latest Client Manager, or * Run the patch comupd50.exe provided on the ORiNOCO CD. ------------------------------------------------------------------- 7. TECHNICAL SUPPORT 7.1 Finding Information On the ORiNOCO Web Site you can find the most recent device drivers, bridge firmware, software updates and user documentation. World Wide Web: HTTP://WWW.LUCENT.COM/ORiNOCO or FTP://FTP.WAVELAN.COM/PUB 7.2 Contact Technical Support If you encounter problems when installing or using this product, or would like information about our other ORiNOCO products, please contact your local Authorized ORiNOCO Reseller or Lucent Technologies Sales office. Addresses and telephone numbers of the Lucent Technologies Sales offices are listed on our ORiNOCO Web Site. Help us Helping you! When contacting Technical Support, please use the Problem Report (report.txt) and send it to us by Fax or E-Mail. A completed Problem Report Form that includes the details about your ORiNOCO product and its host environment will help us helping you to solve your problems. =================================================================== END OF FILEDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.