;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; OEMSETUP.INF for WLLUC52.SYS
;
; Copyright (C) 2000 Lucent Technologies
;
; DATE : $Date: 09 Mar 2001 16:54:04 $ $Revision: 1.27 $
; All rights reserved.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[Identification]
OptionType = NetAdapter
[Options]
WaveLAN_PCMCIA
[OptionsTextENG]
WaveLAN_PCMCIA = "ORiNOCO PC Card"
[ProductConstants]
Manufacturer = "Lucent Technologies"
NCRManufacturer = "NCR"
FunctionTitle = "ORiNOCO Adapter Setup"
SWProductDescription = "ORiNOCO NDIS 4 Miniport Driver"
HWProductDescription = "ORiNOCO Wireless Network Adapter"
[ProductConstants-WaveLAN_PCMCIA]
ConfigFileName = "WNLUC52.CPL"
HelpFileName = "WNLUC.HLP"
HelpCntName = "WNLUC.CNT"
DriverFileName = "WLLUC52.SYS"
PcmciaProductName = "WaveLAN/IEEE"
HWProductName = "WLLUC52"
HWProductTitle = "ORiNOCO PC Card"
DLL_Caption = $(PcmciaProductName)" Settings"
DLL_Network = "Wireless Network Name"
VendorDescription = "ORINOCO PC Card"
SWProductVersionVariant = "2"
SWProductVersionMajor = "6"
SWProductVersionMinor = "41"
SWProductName = $(HWProductName)
SWProductTitle = $(HWProductTitle)" Driver"
SWProductPath = "\SystemRoot\System32\drivers\"$(DriverFileName)
SWProductVersion = $(SWProductVersionMajor)"."$(SWProductVersionMinor)
SWProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(SWProductName)"\CurrentVersion"
SWNProductKeyName = $(!NTN_SoftwareBase)"\"$(NCRManufacturer)"\"$(SWProductName)"\CurrentVersion"
PcmciaKeyName = $(!NTN_ServiceBase)"\PCMCIA\DataBase"
[NetRuleConstants]
SoftwareType = "driver"
NetRuleSoftwareType = $(HWProductName)"Sys ndisDriver "$(HWProductName)"Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """"$(HWProductName)"Sys"" yes no container"
NetRuleSoftwareClass = {$(HWProductName)"Driver basic"}
NetRuleSoftwareBindable = {$(HWProductName)"Driver "$(HWProductName)"Adapter non exclusive 100"}
NetRuleHardwareType = $(HWProductName)" "$(HWProductName)"Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {$(HWProductName)"Adapter basic"}
NetworkCardsKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Define parameters which will be conditionally added as
; values in the device parameters section.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[DriverParameters]
BusType = 1
BusNumber = 0
MediaType = 1
PortType = 1
IoBaseAddress = 8192
DPDebugFlags = 0
DriverVariant = $(SWProductVersionVariant)
DriverMajor = $(SWProductVersionMajor)
DriverMinor = $(SWProductVersionMinor)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Get id string parameters
; Sets Identifier to OptionType string from above.
; Sets Media to installation disk identifier
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[Identify]
Set !DebugOutputControl = 1
Debug-Output "WVLANINF: Identify"
Read-Syms Identification
Set Status = STATUS_SUCCESSFUL
Set Identifier = $(OptionType)
Set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Determine if the language and platform specified is
; supported by this install file.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[ReturnOptions]
Set !DebugOutputControl = 1
Debug-Output "WVLANINF: ReturnOptions"
Set Status = STATUS_FAILED
Set OptionList = {}
Set OptionTextList = {}
Set LanguageList = ^(LanguagesSupported, 1)
IfContains(i) $($0) in $(LanguageList)
IfStr(i) $($1) == ""
Goto ReturnOptions_Success
EndIf
Set PlatformList = ^(PlatformsSupported, 1)
IfContains(i) $($1) in $(PlatformList)
Goto ReturnOptions_Success
Else
Set Status = STATUS_NOTSUPPORTED
Goto ReturnOptions_Failure
EndIf
Else
Set Status = STATUS_NOLANGUAGE
Goto ReturnOptions_Failure
EndIf
ReturnOptions_Success = +
Set OptionList = ^(Options, 1)
Set OptionTextList = ^(OptionsText-$($0), 1)
Set Status = STATUS_SUCCESSFUL
ReturnOptions_Failure = +
Return $(Status) $(OptionList) $(OptionTextList)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; MAIN ENTRY POINT
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[InstallOption]
;;;
;;; FIXME - Turn off debug messages before shipping
;;;
Set SaveDebugOutputControl = $(!DebugOutputControl)
Set !DebugOutputControl = 1
Debug-Output "WVLANINF: InstallOption"
;;;
;;; Get parameters from calling routine
;;;
Set Option = $($1)
Set SrcDir = $($2)
Set AddCopy = $($3)
Set DoCopy = $($4)
Set DoConfig = $($5)
Set LanguageList = ^(LanguagesSupported, 1)
;;;
;;; Check that language is supported, and abort if it is not.
;;;
IfContains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
EndIf
;;;
;;; Get defined strings.
;;;
Read-Syms GeneralConstants
Read-Syms FileConstants
Read-Syms FileConstants-$(!STF_LANGUAGE)
Read-Syms ProductConstants
Read-Syms ProductConstants-$(Option)
Read-Syms NetRuleConstants
Read-Syms DriverParameters
Read-Syms DialogConstants-$(!STF_LANGUAGE)
;;;
;;; Get date
;;;
Detect Date
Set-Subst LF = "\n"
;;;
;;; Set title for this procedure
;;;
Set-Title $(FunctionTitle)
Set GoToLabel = Begin
Set ComeFromLabel = Begin
Set CommonStatus = STATUS_SUCCESSFUL
;;;
;;; Determine mode selected by user in NCPA
;;;
Begin = +
EndWait
IfStr(i) $(!NTN_InstallMode) == "Deinstall"
Set StartLabel = RemoveAdapter
Else-IfStr(i) $(!NTN_InstallMode) == "Update"
Set StartLabel = UpgradeSoftware
Else-IfStr(i) $(!NTN_InstallMode) == "Bind"
Set StartLabel = BindingAdapter
Else-IfStr(i) $(!NTN_InstallMode) == "Configure"
Set StartLabel = ConfigureAdapter
Else
Set StartLabel = InstallAdapter
EndIf
Debug-Output $(SWProductName)": ============================================="
Debug-Output $(SWProductName)": Option = "$(Option)
Debug-Output $(SWProductName)": SrcDir = "$(SrcDir)
Debug-Output $(SWProductName)": AddCopy = "$(AddCopy)
Debug-Output $(SWProductName)": DoCopy = "$(DoCopy)
Debug-Output $(SWProductName)": DoConfig = "$(DoConfig)
Debug-Output $(SWProductName)": STF_LANGUAGE = "$(!STF_LANGUAGE)
Debug-Output $(SWProductName)": STF_CWDIR = "$(!STF_CWDIR)
Debug-Output $(SWProductName)": NTN_InstallMode = "$(!NTN_InstallMode)
Debug-Output $(SWProductName)": NTN_RegBase = "$(!NTN_RegBase)
Debug-Output $(SWProductName)": ============================================="
Set ComeFromLabel = fatal
Set GoToLabel = fatal
Goto $(StartLabel)
InstallAdapter = +
Debug-Output $(SWProductName)": InstallAdapter: "$(SWProductKeyName)
;;;
;;; See if the software has already been installed.
;;;
StartWait
OpenRegKey $(!REG_H_LOCAL) "" $(SWProductKeyName) $(MAXIMUM_ALLOWED) +
hKeySWProduct
IfStr $(hKeySWProduct) != $(hKeyNull)
Debug-Output $(SWProductName)": Already Installed: "$(SWProductKeyName)
IfStr(i) $(SWProductKeyName) == $(!NTN_RegBase)
;;;
;;; The software is already installed, don't do it again.
;;;
Shell $(UtilityInf), VerExistedDlg, +
$(SWProductTitle), +
$(SWProductVersion)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run VerExistedDlg"
Goto ShellCodeError
EndIf
Debug-Output $(SWProductName)": Software already installed"
Goto end
Else
;;;
;;; The software is already installed, now the user is adding
;;; a new hardware instance. Let's make sure it's okay.
;;;
Shell $(UtilityInf), CardExistedDlg
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run CardExistedDlg"
Goto ShellCodeError
EndIf
IfStr(i) $($R1) != "OK"
Debug-Output $(SWProductName)": User cancelled install"
Goto end
EndIf
EndIf
Else
;;;
;;; The software is not installed, so do it now.
;;; Start by copying the files to the system disk.
;;;
Debug-Output $(SWProductName)": First Time Install: "$(SWProductKeyName)
; If this is not running via the NCPA, we need to change the
; SrcDir since DoAskSource won't prompt for the disk. If the
; NCPA is not used, the files should be copied before launching
; the INF install, and you should do no file copies from the INF.
IfStr(i) $(!NTN_InstallPhase) == "primary"
;Set SrcDir = "A:\"
Set SrcDir = $($2)
EndIf
;;;
;;; If SrcDir is not set, ask the user to locate it for us.
;;;
Set STF_INSTALL_OUTCOME = STF_SUCCESS
IfStr(i) $(SrcDir) == ""
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), "A:\", "NO"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Set STF_INSTALL_OUTCOME = STATUS_SHELL_FAILED
Else-IfStr(i) $($R0) == STATUS_FAILED
Set STF_INSTALL_OUTCOME = STATUS_FAILED
Else-IfStr(i) $($R0) == STATUS_USERCANCEL
Set STF_INSTALL_OUTCOME = STATUS_USERCANCEL
Else
Set SrcDir = $($R1)
EndIf
EndIf
IfStr(i) $(STF_INSTALL_OUTCOME) == STF_SUCCESS
Install "Install-Software"
Endif
IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Debug-Output $(SWProductName)": Install-Software ERROR="$(STF_INSTALL_OUTCOME)
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
EndIf
Set Error = $($R0)
Goto fatal
EndIf
;;;
;;; Now add the software component to the registry.
;;;
Debug-Output $(SWProductName)": AddSoftwareComponent"
Debug-Output $(SWProductName)": Manufacturer = "$(Manufacturer)
Debug-Output $(SWProductName)": SWProductName = "$(SWProductName)
Debug-Output $(SWProductName)": SWProductTitle = "$(SWProductTitle)
Debug-Output $(SWProductName)": STF_CONTEXTINFNAME = "$(STF_CONTEXTINFNAME)
Debug-Output $(SWProductName)": SWProductPath = "$(SWProductPath)
Set OEM_ABANDON_SOFTWARE = TRUE
Shell $(UtilityInf), AddSoftwareComponent, +
$(Manufacturer), +
$(SWProductName), +
$(SWProductName), +
$(SWProductTitle), +
$(STF_CONTEXTINFNAME), +
$(SWProductPath), +
"kernel", "NDIS", {}, "", +
$(NetEventDLL)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddSoftwareComponent"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
Set hKeySWProduct = $($R1)
Set hKeySWNetRules = $($R2)
Set hKeySWService = $($R3)
Set hKeySWParameter = $($R4)
Set hKeySWLinkage = $($R5)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": AddSoftwareComponent ERROR="$(RegistryErrorIndex)
Goto fatalRegistry
EndIf
;;;
;;; Write the values to the software product key.
;;;
Debug-Output $(SWProductName)": AddValueList hKeySWProduct"
Set NewValueList = {+
{Description,$(NoTitle),$(!REG_VT_SZ),$(SWProductDescription)}, +
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}, +
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(SWProductVersionMajor)}, +
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(SWProductVersionMinor)}, +
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(SWProductName)}, +
{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)}, +
{Title,$(NoTitle),$(!REG_VT_SZ),$(SWProductTitle)} +
}
Shell $(UtilityInf), AddValueList, $(hKeySWProduct), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeySWProduct"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": AddValueList hKeySWProduct ERROR="$(RegistryErrorIndex)
Goto fatalRegistry
EndIf
;;;
;;; Write the values to the software NetRules key.
;;;
Debug-Output $(SWProductName)": AddValueList hKeySWNetRules"
Set NewValueList = {+
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, +
{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)} +
}
Shell $(UtilityInf), AddValueList, $(hKeySWNetRules), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeySWNetRules"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": AddValueList hKeySWNetRules ERROR="$(RegistryErrorIndex)
Goto fatalRegistry
EndIf
;;;
;;; If this is just a software install, we're done.
;;;
Debug-Output $(SWProductName)": Software install complete"
EndIf
;;;
;;; Okay, if we're here, it must be time to install a new hardware device.
;;;
Debug-Output $(SWProductName)": AddHardwareComponent"
Set OEM_ABANDON_HARDWARE = TRUE
Shell $(UtilityInf), AddHardwareComponent, $(HWProductName), +
$(STF_CONTEXTINFNAME), $(SWProductKeyName)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddHardwareComponent"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
Set hKeyNetCard = $($R1)
Set hKeyNetCardRules = $($R2)
Set hKeyDeviceParameters = $($R3)
Set NetCardNumber = $($R4)
Set ServiceName = $($R5)
IfInt $(NetCardNumber) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), +
$(NetworkCardsKeyName)$(NetCardNumber))
EndIf
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": AddHardwareComponent ERROR="$($R0)
Goto fatalRegistry
EndIf
;;;
;;; Now add the values to the NetworkCards\N subkey.
;;;
Debug-Output $(SWProductName)": AddValueList hKeyNetCard"
Set NewValueList = {+
{Description,$(NoTitle),$(!REG_VT_SZ),$(HWProductDescription)}, +
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}, +
{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)}, +
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(HWProductName)}, +
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ServiceName)}, +
{Title,$(NoTitle),$(!REG_VT_SZ),"["$(NetCardNumber)"] "$(HWProductTitle)} +
}
Shell $(UtilityInf), AddValueList, $(hKeyNetCard), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeyNetCard"
Goto ShellCodeError
EndIf
;;;
;;; Now add the values to the NetworkCards\N\NetRules subkey.
;;;
Set TempBindForm = """"$(ServiceName)""""$(NetRuleHardwareBindForm)
Set NewValueList = {+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, +
{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)}+
}
Shell $(UtilityInf), AddValueList, $(hKeyNetCardRules), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeyNetCardRules"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": AddValueList: hKeyNetCardRules ERROR="$(RegistryErrorIndex)
Goto fatalRegistry
EndIf
;;;
;;; Now add the fixed values to the adapter parameters subkey.
;;;
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}, +
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusType)}, +
{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(MediaType)} +
}
Shell $(UtilityInf), AddValueList, $(hKeyDeviceParameters), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeyDeviceParameters"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": AddValueList: hKeyDeviceParameters ERROR="$(RegistryErrorIndex)
Goto fatalRegistry
EndIf
IfStr(i) $(Option) == "WaveLAN_PCMCIA"
;;;
;;; If PCMCIA adapter, add keys and values to allow NT to create
;;; attribute window when the system boots.
;;;
;;;<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< HERE THE PCMCIA DATABASE IS OPENED !!!!!!!!!!!
;;;
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) +
hKeyPcmciaDatabase
IfStr $(hKeyPcmciaDatabase) == $(hKeyNull)
Debug-Output $(SWProductName)": OpenRegKey failed to open: "$(PcmciaKeyName)
Goto fatalRegistry
EndIf
;;;
;;;-------------------------LUCENT ---------------------------------------------------------------------
;;;
;;; Try to create the LUCENT keys in PCMCIA database, but don't fail if they're already there.
;;;
CreateRegKey $(hKeyPcmciaDatabase) {$(Manufacturer), 0, GenericClass} +
"" $(MAXIMUM_ALLOWED) "" hKeyPcmciaManufacturer
IfStr $(hKeyPcmciaManufacturer) == $(hKeyNull)
OpenRegKey $(hKeyPcmciaDatabase) "" $(Manufacturer) $(MAXIMUM_ALLOWED) +
hKeyPcmciaManufacturer
IfStr $(hKeyPcmciaManufacturer) == $(hKeyNull)
Debug-Output $(SWProductName)": OpenRegKey failed to open: " +
$(PcmciaKeyName)"\"$(Manufacturer)
Goto fatalRegistry
EndIf
EndIf
;;;
;;; Try to create WaveLAN/IEEE product key under manufacturer key, but don't fail if it's already there.
;;;
CreateRegKey $(hKeyPcmciaManufacturer) { $(PcmciaProductName), 0, GenericClass } "" +
$(MAXIMUM_ALLOWED) "" hKeyPcmciaProduct
IfStr $(hKeyPcmciaProduct) == $(hKeyNull)
OpenRegKey $(hKeyPcmciaManufacturer) "" $(PcmciaProductName) $(MAXIMUM_ALLOWED) +
hKeyPcmciaProduct
IfStr $(hKeyPcmciaProduct) == $(hKeyNull)
Debug-Output $(SWProductName)": OpenRegKey failed to open: "
$(PcmciaKeyName)"\"$(Manufacturer)"\"$(PcmciaProductName)
Goto fatalRegistry
EndIf
Endif
;;;
;;; Now write the values to the registry.
;;;
Set NewValueList = {+
{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}, +
{Driver,$(NoTitle),$(!REG_VT_SZ), $(SWProductName)}, +
{InfFileName,$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)}, +
{Option,$(NoTitle),$(!REG_VT_SZ),$(Option)}+
}
Shell $(UtilityInf), AddValueList, $(hKeyPcmciaProduct), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeyPcmciaProduct (Lucent)"
Goto ShellCodeError
EndIf
EndIf
;;;-------------------------LUCENT ---------------------------------------------------------------------
;;;
;;;-------------------------NCR ---------------------------------------------------------------------
;;;
;;; Try to create the NCR keys in PCMCIA database, but don't fail if they're already there.
;;;
CreateRegKey $(hKeyPcmciaDatabase) {$(NCRManufacturer), 0, GenericClass} +
"" $(MAXIMUM_ALLOWED) "" hKeyPcmciaManufacturer
IfStr $(hKeyPcmciaManufacturer) == $(hKeyNull)
OpenRegKey $(hKeyPcmciaDatabase) "" $(NCRManufacturer) $(MAXIMUM_ALLOWED) +
hKeyPcmciaManufacturer
IfStr $(hKeyPcmciaManufacturer) == $(hKeyNull)
Debug-Output $(SWProductName)": OpenRegKey failed to open: " +
$(PcmciaKeyName)"\"$(NCRManufacturer)
Goto fatalRegistry
EndIf
EndIf
;;;
;;; Try to create WaveLAN/IEEE product key under the NCR key, but don't fail if it's already there.
;;;
CreateRegKey $(hKeyPcmciaManufacturer) { $(PcmciaProductName), 0, GenericClass } "" +
$(MAXIMUM_ALLOWED) "" hKeyPcmciaProduct
IfStr $(hKeyPcmciaProduct) == $(hKeyNull)
OpenRegKey $(hKeyPcmciaManufacturer) "" $(PcmciaProductName) $(MAXIMUM_ALLOWED) +
hKeyPcmciaProduct
IfStr $(hKeyPcmciaProduct) == $(hKeyNull)
Debug-Output $(SWProductName)": OpenRegKey failed to open: "
$(PcmciaKeyName)"\"$(NCRManufacturer)"\"$(PcmciaProductName)
Goto fatalRegistry
EndIf
Endif
;;;
;;; Now write the values to the registry.
;;;
Set NewValueList = {+
{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}, +
{Driver,$(NoTitle),$(!REG_VT_SZ), $(SWProductName)}, +
{InfFileName,$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)}, +
{Option,$(NoTitle),$(!REG_VT_SZ),$(Option)}+
}
Shell $(UtilityInf), AddValueList, $(hKeyPcmciaProduct), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeyPcmciaProduct (NCR)"
Goto ShellCodeError
EndIf
EndIf
;;;-------------------------NCR ---------------------------------------------------------------------
EndWait
Goto ConfigureHardware
ConfigureAdapter = +
IfStr(i) $(SWProductKeyName) == $(!NTN_RegBase)
;;;
;;; Cannot configure software component
;;;
Debug-Output $(SWProductName)": Can't configure software component: "$(SWProductKeyName)
Shell $(UtilityInf), RegistryErrorString, CANNOT_CONFIGURE_SOFTWARE
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)":ShellCode: RegistryErrorString: "$($ShellCode)
Goto ShellCodeError
EndIf
Set Error = $($R0)
Set ComeFromLabel = end
Set GoToLabel = end
Goto nonFatalInfo
EndIf
;;;
;;; Configure hardware component
;;;
Debug-Output $(SWProductName)": ConfigureAdapter"
;;;
;;; Open the hardware device key and parameters key
;;;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) +
hKeyNetCard
IfStr $(hKeyNetCard) == $(hKeyNull)
Debug-Output $(SWProductName)": OpenRegKey failed to open: "$(!NTN_RegBase)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalRegistry
EndIf
Shell $(UtilityInf) FindService, $(hKeyNetCard)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run FindService"
Goto ShellCodeError
EndIf
IfStr(i) $($R0) != NO_ERROR
Debug-Output $(SWProductName)": FindService ERROR="$($R0)
Goto fatalRegistry
EndIf
Set hKeyDevice = $($R1)
Set hKeyDeviceParameters = $($R2)
GetRegValue $(hKeyNetCard),"ServiceName", ServiceNameInfo
Set ServiceName = *($(ServiceNameInfo), 4)
ConfigureHardware = +
Debug-Output $(SWProductName)": ConfigureHardware"
;;;
;;; Make sure the device key has been found
;;;
IfStr $(ServiceName) == ""
Debug-Output $(SWProductName)": ServiceName not found"
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalRegistry
EndIf
IfStr $(hKeyDeviceParameters) == $(hKeyNull)
Debug-Output $(SWProductName)": Service\Parameters does not exist"
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalRegistry
EndIf
;;;
;;; Read the existing parameters from the registry
;;;
Debug-Output $(SWProductName)": Reading parameters from registry"
Set ValueName = ""
Set ValueData = ""
Set ValueStr = ""
Set ValueList = {}
EnumRegValue $(hKeyDeviceParameters) ValueList
ForListDo $(ValueList)
Set ValueItem = $($)
Set ValueName = *($(ValueItem),1)
Set ValueData = *($(ValueItem),4)
IfStr(i) $(ValueName) == "DebugFlags"
Set DPDebugFlags = $(ValueData)
Else-IfStr(i) $(ValueName) == "PortType"
Set PortType = $(ValueData)
Else-IfStr(i) $(ValueName) == "IoBaseAddress"
Set IoBaseAddress = $(ValueData)
Else-IfStr(i) $(ValueName) == "AdapterName"
Set AdapterName = $(ValueData)
Endif
EndForListDo
writeParameters = +
Debug-Output $(SWProductName)": writeParameters"
IfStr(i) $(Option) == "WaveLAN_ISA"
Set NewValueList = {+
{DebugFlags,$(NoTitle),$(!REG_VT_DWORD),$(DPDebugFlags)}, +
{PortType,$(NoTitle),$(!REG_VT_DWORD),$(PortType)} +
}
Else-IfStr(i) $(Option) == "WaveLAN_PCMCIA"
ifstr $(AdapterName) == ""
set AdapterName = $(HWProductName)$(NetCardNumber)
endif
Set NewValueList = {+
{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
{DebugFlags,$(NoTitle),$(!REG_VT_DWORD),$(DPDebugFlags)}, +
{PortType,$(NoTitle),$(!REG_VT_DWORD),$(PortType)} +
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddress)} +
{DLL_Caption,$(NoTitle),$(!REG_VT_SZ),$(DLL_Caption)} +
{DLL_Network,$(NoTitle),$(!REG_VT_SZ),$(DLL_Network)} +
{VendorDescription,$(NoTitle),$(!REG_VT_SZ),$(VendorDescription)} +
{AdapterName,$(NoTitle),$(!REG_VT_SZ),$(AdapterName)} +
{DriverVariant,$(NoTitle),$(!REG_VT_DWORD),$(DriverVariant)} +
{DriverMajor,$(NoTitle),$(!REG_VT_DWORD),$(DriverMajor)} +
{DriverMinor,$(NoTitle),$(!REG_VT_DWORD),$(DriverMinor)} +
;;;
}
EndIf
Shell $(UtilityInf), AddValueList, $(hKeyDeviceParameters), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeyDeviceParameters"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": AddValueList: hKeyDeviceParameters ERROR="$(RegistryErrorIndex)
Goto fatalRegistry
EndIf
configureDialog = +
Debug-Output $(SWProductName)": WavelanConfigure("$(Option)", "$(ServiceName)")"
LoadLibrary "" $(ConfigFileName) hLibrary
LibraryProcedure ConfigResult $(hLibrary) WavelanConfigure +
$(Option), $(ServiceName)
FreeLibrary $(hLibrary)
Debug-Output $(SWProductName)": WavelanConfigure Result="$(ConfigResult)
Set CommonStatus = $(ConfigResult)
IfStr(i) $(CommonStatus) == "STATUS_USERCANCEL"
Goto end
Else-IfStr(i) $(ConfigResult) != "STATUS_SUCCESSFUL"
GoTo fatal
EndIf
Goto end
BindingAdapter = +
Set Error = $(SWProductName)": Setup does not support binding."
Debug-Output $(Error)
Goto fatal
RemoveAdapter = +
Debug-Output $(SWProductName)": RemoveAdapter"
IfStr(i) $(SWProductKeyName) == $(!NTN_RegBase)
;;;
;;; Remove the software component only after all devices are removed.
;;;
Debug-Output $(SWProductName)": Calling RemoveSoftwareComponent"
Shell $(UtilityInf), RemoveSoftwareComponent, +
$(Manufacturer), +
$(SWProductName)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run RemoveSoftwareComponent"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": RemoveSoftwareComponent ERROR="$($R0)
Goto fatalRegistry
EndIf
Else
;;;
;;; Remove the specified device
;;;
Debug-Output $(SWProductName)": Calling RemoveHardwareComponent"
Shell $(UtilityInf), RemoveHardwareComponent, +
$(Manufacturer), +
$(HWProductName), +
$(!NTN_RegBase)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run RemoveHardwareComponent"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": RemoveHardwareComponent ERROR="$($R0)
Goto fatalRegistry
EndIf
EndIf
Goto end
UpgradeSoftware = +
Debug-Output $(SWProductName)": UpgradeSoftware"
;;;
;;; For software upgrade, copy new files to the system directory.
;;;
Debug-Output $(SWProductName)": Upgrade Software Component"
OpenRegKey $(!REG_H_LOCAL) "" $(SWProductKeyName) $(MAXIMUM_ALLOWED) +
hKeySWProduct
IfStr $(hKeySWProduct) != $(hKeyNull)
GetRegValue $(hKeySWProduct),"MajorVersion", VersionInfo
Set MajorVersion = *($(VersionInfo), 4)
GetRegValue $(hKeySWProduct),"MinorVersion", VersionInfo
Set MinorVersion = *($(VersionInfo), 4)
Set NeedUpgrade = FALSE
IfInt $(MajorVersion) < $(SWProductVersionMajor)
Set NeedUpgrade = TRUE
Else-IfInt $(MajorVersion) == $(SWProductVersionMajor)
IfInt $(MinorVersion) < $(SWProductVersionMinor)
Set NeedUpgrade = TRUE
Endif
Endif
IfStr(i) $(NeedUpgrade) == TRUE
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(hKeySWProduct)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run GetInfFileNameFromRegistry"
Goto ShellCodeError
EndIf
Set !UG_Filename = $($R0)
IfStr(i) $(!UG_Filename) != ""
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir), "YES"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Set STF_INSTALL_OUTCOME = STATUS_SHELL_FAILED
Else-IfStr(i) $($R0) == STATUS_FAILED
Set STF_INSTALL_OUTCOME = STATUS_FAILED
Else-IfStr(i) $($R0) == STATUS_USERCANCEL
Set STF_INSTALL_OUTCOME = STATUS_USERCANCEL
Else
Set SrcDir = $($R1)
Install "Install-Update"
Endif
IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Debug-Output $(SWProductName)": Install ERROR="$(STF_INSTALL_OUTCOME)
Goto fatal
EndIf
Else
Debug-Output $(SWProductName)": InfFileName is NULL"
EndIf
SetRegValue $(hKeySWProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(SWProductVersionMajor)}
SetRegValue $(hKeySWProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(SWProductVersionMinor)}
EndIf
;;;
;;; I found the stuff I was looking for, so I finished now, goto end !
;;;
Goto end
EndIf
;;;
;;; I didn't find the Lucent stuff, try the NCR stuff
;;;
Debug-Output $(SWProductName)": Upgrade Software Component"
OpenRegKey $(!REG_H_LOCAL) "" $(SWNProductKeyName) $(MAXIMUM_ALLOWED) +
hKeySWProduct
IfStr $(hKeySWProduct) != $(hKeyNull)
GetRegValue $(hKeySWProduct),"MajorVersion", VersionInfo
Set MajorVersion = *($(VersionInfo), 4)
GetRegValue $(hKeySWProduct),"MinorVersion", VersionInfo
Set MinorVersion = *($(VersionInfo), 4)
Set NeedUpgrade = FALSE
IfInt $(MajorVersion) < $(SWProductVersionMajor)
Set NeedUpgrade = TRUE
Else-IfInt $(MajorVersion) == $(SWProductVersionMajor)
IfInt $(MinorVersion) < $(SWProductVersionMinor)
Set NeedUpgrade = TRUE
Endif
Endif
IfStr(i) $(NeedUpgrade) == TRUE
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(hKeySWProduct)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run GetInfFileNameFromRegistry"
Goto ShellCodeError
EndIf
Set !UG_Filename = $($R0)
IfStr(i) $(!UG_Filename) != ""
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir), "YES"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Set STF_INSTALL_OUTCOME = STATUS_SHELL_FAILED
Else-IfStr(i) $($R0) == STATUS_FAILED
Set STF_INSTALL_OUTCOME = STATUS_FAILED
Else-IfStr(i) $($R0) == STATUS_USERCANCEL
Set STF_INSTALL_OUTCOME = STATUS_USERCANCEL
Else
Set SrcDir = $($R1)
Install "Install-Update"
Endif
IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Debug-Output $(SWProductName)": Install ERROR="$(STF_INSTALL_OUTCOME)
Goto fatal
EndIf
Else
Debug-Output $(SWProductName)": InfFileName is NULL"
EndIf
SetRegValue $(hKeySWProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(SWProductVersionMajor)}
SetRegValue $(hKeySWProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(SWProductVersionMinor)}
EndIf
Else
;;;
;;; this really means there is a problem
;;;
Debug-Output $(SWProductName)": Cannot upgrade -- software was never installed"
Goto fatalRegistry
EndIf
Goto end
;;;
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(SWProductName), $($)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run RemoveHardwareComponent"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": RemoveHardwareComponent ERROR="$(RegistryErrorIndex)
Goto fatalRegistry
EndIf
EndForListDo
IfStr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(SWProductName), FALSE
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run RemoveSoftwareComponent"
Goto ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(SWProductName)": RemoveSoftwareComponent ERROR="$(RegistryErrorIndex)
Goto fatalRegistry
EndIf
EndIf
Goto end
warning = +
EndWait
Shell $(SubRoutineInf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run SetupMessage"
Goto ShellCodeError
EndIf
IfStr(i) $($R1) == "OK"
Debug-Output $(SWProductName)": WARNING goto "$(GoToLabel)
Goto $(GoToLabel)
Else-IfStr(i) $($R1) == "CANCEL"
Debug-Output $(SWProductName)": WARNING goto "$(ComeFromLabel)
Goto $(ComeFromLabel)
Else
Debug-Output $(SWProductName)": WARNING goto end"
Goto end
EndIf
nonFatalInfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
Goto nonFatalMsg
nonFatal = +
Set Severity = nonFatal
Goto nonFatalMsg
nonFatalMsg = +
EndWait
IfStr(i) $(Error) == ""
Set Severity = nonFatal
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run RegistryErrorString"
Goto ShellCodeError
EndIf
Set Error = $($R0)
EndIf
Shell $(SubRoutineInf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run SetupMessage"
Goto ShellCodeError
EndIf
IfStr(i) $($R1) == "OK"
Debug-Output $(SWProductName)": NONFATAL goto "$(ComeFromLabel)
Goto $(ComeFromLabel)
Else
Debug-Output $(SWProductName)": NONFATAL goto end"
Goto end
EndIf
fatalRegistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run RegistryErrorString"
Goto ShellCodeError
EndIf
Set Error = $($R0)
Goto fatal
fatal = +
IfStr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run RegistryErrorString"
Goto ShellCodeError
EndIf
Set Error = $($R0)
EndIf
Shell $(SubRoutineInf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run SetupMessage"
Goto ShellCodeError
EndIf
Goto SetFailed
ShellCodeError = +
Set DlgType = "MessageBox"
Set STF_MB_TITLE = "Error: "$(FunctionTitle)
Set STF_MB_TEXT = "Shell Code Error"
Set STF_MB_TYPE = 1
Set STF_MB_ICON = 3
Set STF_MB_DEF = 1
UI Start "Error Message"
Goto SetFailed
SetFailed = +
Set CommonStatus = STATUS_FAILED
IfStr(i) $(OEM_ABANDON_HARDWARE) == TRUE
Set OEM_ABANDON_HARDWARE = FALSE
Goto abandon
EndIf
Goto end
end = +
;;;
;;; All done, close all open handles and return to setup program
;;;
IfStr $(hKeySWProduct) != $(hKeyNull)
CloseRegKey $(hKeySWProduct)
EndIf
IfStr $(hKeyDevice) != $(hKeyNull)
CloseRegKey $(hKeyDevice)
EndIf
IfStr $(hKeyDeviceParameters) != $(hKeyNull)
CloseRegKey $(hKeyDeviceParameters)
EndIf
IfStr $(hKeyNetCard) != $(hKeyNull)
CloseRegKey $(hKeyNetCard)
EndIf
IfStr $(hKeyNetCardRules) != $(hKeyNull)
CloseRegKey $(hKeyNetCardRules)
EndIf
IfStr $(hKeySWProduct) != $(hKeyNull)
CloseRegKey $(hKeySWProduct)
EndIf
IfStr $(hKeySWNetRules) != $(hKeyNull)
CloseRegKey $(hKeySWNetRules)
EndIf
IfStr $(hKeySWService) != $(hKeyNull)
CloseRegKey $(hKeySWService)
EndIf
IfStr $(hKeySWParameter) != $(hKeyNull)
CloseRegKey $(hKeySWParameter)
EndIf
IfStr $(hKeySWLinkage) != $(hKeyNull)
CloseRegKey $(hKeySWLinkage)
EndIf
IfStr $(hKeyPcmciaDatabase) != $(hKeyNull)
CloseRegKey $(hKeyPcmciaDatabase)
EndIf
IfStr $(hKeyPcmciaManufacturer) != $(hKeyNull)
CloseRegKey $(hKeyPcmciaManufacturer)
EndIf
IfStr $(hKeyPcmciaProduct) != $(hKeyNull)
CloseRegKey $(hKeyPcmciaProduct)
EndIf
IfStr $(hKeyService) != $(hKeyNull)
CloseRegKey $(hKeyService)
EndIf
Set !DebugOutputControl = $(SaveDebugOutputControl)
EndWait
Return $(CommonStatus)
[Install-Software]
; If this is an initial network install, DoCopy will be set to NO.
; So we must ignore this directive and copy our DLL to the system
; disk so we can run our configuration DLL.
Debug-Output $(SWProductName)": Install-Software"
Set STF_VITAL = ""
Set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Driver $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
Set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Update]
Debug-Output $(SWProductName)": Install-Update"
Set STF_VITAL = ""
Set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Driver $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
Set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Source Media Descriptions]
1 = "ORiNOCO Install Disk"
[Files-Inf]
1, OEMSETUP.INF, SIZE=99999, RENAME=$(!UG_Filename)
[Files-Dll]
1, $(ConfigFileName), SIZE=199999 OVERWRITE=ALWAYS
1, $(HelpFileName), SIZE=99999 OVERWRITE=ALWAYS
1, $(HelpCntName), SIZE=99999 OVERWRITE=ALWAYS
1, Wcluc52.exe, SIZE=99999 OVERWRITE=ALWAYS
[Files-Driver]
1, $(DriverFileName), SIZE=99999 OVERWRITE=ALWAYS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Define the environment supported by this installer
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[ProductType]
STF_PRODUCT = winNT
STF_PLATFORM = i386
[LanguagesSupported]
ENG
[PlatformsSupported]
ISA
EISA
PCI
PCMCIA
"Jazz-Internal Bus"
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Define commonly used constants, values, and strings
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[GeneralConstants]
MAXIMUM_ALLOWED = 33554432
NoTitle = 0
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
RegistryErrorIndex = NO_ERROR
DriverPath = $(!STF_NTPATH)\drivers
hKeyNull = ""
hKeySWProduct = $(hKeyNull)
hKeyDevice = $(hKeyNull)
hKeyDeviceParameters = $(hKeyNull)
hKeyNetCard = $(hKeyNull)
hKeyNetCardRules = $(hKeyNull)
hKeySWProduct = $(hKeyNull)
hKeySWNetRules = $(hKeyNull)
hKeySWService = $(hKeyNull)
hKeySWParameter = $(hKeyNull)
hKeySWLinkage = $(hKeyNull)
hKeyPcmciaDatabase = $(hKeyNull)
hKeyPcmciaManufacturer = $(hKeyNull)
hKeyPcmciaProduct = $(hKeyNull)
hKeyService = $(hKeyNull)
ServiceName = ""
NetCardNumber = -1
OEM_ABANDON_OPTIONS = {}
OEM_ABANDON_SOFTWARE = FALSE
OEM_ABANDON_HARDWARE = FALSE
[FileConstants]
UtilityInf = "UTILITY.INF"
SubRoutineInf = "SUBROUTN.INF"
ParamInf = "NCPARAM.INF"
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
[FileConstants-ENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. " +
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[DialogConstants-ENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.