DWL-900AP Firmware Upgrade Instructions 1. Download the Firmware for the DWL-900AP from www.support.dlink.com/downloads 2. Extract the Firmware file to your Desktop or any location that you will remember. You can do this by selecting "Browse". 3. Connect the DWL-900AP to your computer via USB. 4. Make sure that you are connected to the DWL-900AP by running the USB configuration utility. Don't change any settings, this is only to make sure you are connected. 5. Double click the "dwl900AP_firmware_14h2.exe" file that was extracted. 6. The Firmware will automatically upload the to the DWL-900AP. 6. Be sure not to disrupt the upgrade process at any time by disconnecting the DWL-900AP from power or USB. 7. During the Firmware upgrade you will see a window called "Update Firmware File" There will be a cartoon face on the left side of the window. 8. Next you will see a window labled "Update FW" that says "Update firmware succesfully". Click the OK button. 9. The last screen will have the cartoon face, this time with a smile. Click Exit to finish. 10. Congratulations, you have just upgraded the Firmware on your DWL-900AP.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.