This file contains a list of all fixed or rejected issues per each build of Array Manager. Fixes apply to 3.1,3.1.1, 3.1.2, 3.2.0 and 3.3.0 builds, unless otherwise specified. Mylex fixes are only in 3.1.1 and 3.1.2 builds unless otherwise specified.
515.4
DFCT55675 Unable to change Qlimit setting in Array Manager with Netware.
-- pv660f_reg.dat
515.3
Contains fix for hotspare problem in mylex provider code
DFCT55338 Hotspare won't create
-- PV660F_P.dll
515.1
Megalib 4.14.0
Memory Leak problem for Avalon and Shredder HP systems has been fixed.
(no DFCT) Firmware/Driver mismatch with Perc 4/IM on Avalon in amutils
-- versiontab.cpp
(no DFCT) Delete all files in ExtInstall and MsgInstall subdirectories on an upgrade install
-- support.rul, setup.rul
DFCT62292 Raid10 on NetWare selects 2 disks. Missing initialization statement.
-- percpro.nlm
(no dfct) Turn off debugging for Windows ASPIPro.
-- aspipro.dll
DFCT61163 Words missing in the wizard because of the double space in Chinese environment
-- percext.dll, perc2ext.dll
CHNG59206 Marble should allow Decimal point for size in creating/transforming.
-- percext.dll, perc2ext.dll
DFCT62561 "Unblink Virtual Disk" entry should be grayed out for CERCATA controller
-- percpro.nlm
515.0
No Support for Linux NT4 and NW4
megalib Windows 4.13 NW 4.13
Dr= Driver.
Controller Firmware NT4Dr W2kDr .netDr NW4.2Dr NW5.1Dr NW6.1Dr Linux
Perc2/SC (Quartz) 3.13 2.32 2.68 NA 2.06 2.06 6.01r
Perc2/SC (Quartz) on 8450 3.13 4.15 2.68 NA 3.12 6.01r 6.01r
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 NA 2.06 2.06 6.01r
Perc2/DC (Vail) x400+ Servers 1.06 4.15 2.68 NA 3.12 6.01r 6.01r
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) 1.71 4.15 5.32 6.26.25.32 3.12 6.01r 6.01r 1.18c
CERC ATA100/4ch(Ventura) 6.61 4.15 5.32 NA NA 6.01r 6.01r
CERC ATA/2S 2.6. 4.0. 4.0. 4.0. NA 6.06 6.06
Discovery ROMB 2.01 4.15 5.32 6.25.32 NA 6.01r 6.01r 1.18c
PERC 4SC/DC TM12 4.16 5.33 6.25 NA 6.01r 6.01r 1.18c
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger ROMB)
Perc3/Di (Boxster ROMB) 3170 4944 4944 4944 NA 3564 3564
Perc2/Si (Iguana ROMB)
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3571 4944 4944 4944 NA 3564 3564
U320 HBA BIOS-5.02.07.01 INBIOS 1.08.06 1.08.06 NA NA 1020000 1020000
PERC4 IM 1.00.12 1.08.06 1.08.06 NA NA 1
megalib 4.13 .dll & .nlm fixes for:
DFCT62094 - Megalib returns scsi status 0 on megalib p-thru TestUnitRdy to a failed drive.
DFCT61656 - Drive mapping still points to Hard disk after mirror created on Avalon.
DFCT61157 - Battery Status indicator does not detect missing battery in Perc 4 DC.
DFCT61538 Add category function does not work properly
-- veritas build 3.3.515.0
DFCT62127 1.72 Perc 3 DC firmware is not displaying correctly in NT 4.0
-- amcheckreq.dll, versiontab.cpp
DFCT57796 error messages when install marble in Netware in Discovery system
-- aminst.c
DFCT61710 Subsystem folders are different in Netware in Array Manager Utilities
-- servmgr.rc
DFCT61577 Perc 4 IM Driver\Firmware is not displaying correctly in AM Utilities
-- versiontab.cpp
DFCT60457 Restart after MN install does not work because Marble does not install
-- dialog.rul
CHNG60352 Cleanup script for LDM services during sysprep
-- cln_bef.bat, cln_aft.bat, corelist.new and machine.new
DFCT61582 Install issues a Warning message for Perc 3Di with the 2.7.1 (3166) firmware
-- dialog.rul
CHNG48399 Fix Prepare to Remove on Avalon/GEM318: Rearrange order of drive spindown and blink drive,
because MegaLib unblinks the drive on spindown. Also add call to PollGem318Enclosure in
enclosure poll thread.
-- percpro.dll, percpro.nlm
DFCT60763 2nd dedicated hot spare on Perc2 missing after VD rebuild. The logic that removes the hot spare that kicks in
didn't stop with the first hot spare found (the one that kicks in). It would also other hot spares from this
VD or any other VD that claims those hot spares.
-- perc2pro.dll,perc2pro.nlm
DFCT61478 Terra byte size is representing in +e006 format which is too difficult for user
-- percext.dll, perc2ext.dll
DFCT61064 Stripe depth error message while attempting to create a VD during a rebuild.
Added a new message that indicates both possible causes. LSI will later (3.4) modify
MegaLib to return a different return status in this case.
-- percpro.dll,percmsg.dll,percpro.nlm
DFCT61837 Useless pop-up after creating 1/2 sized VD's
-- percext.dll
(No Dfct) Add Gem318 support to AspiPro (if IM is disabled on Avalon, the Perc 4/im becomes a Ultra 320
controller and we need logic to correctly identify GEM318 as a backplane in Avalon). This will
allow blink and unblink commands to work in AspiPro.
DFCT62041 Marble allows same disk to be assigned as dedicated hotspare to multiple VDs
-- perc2ext.dll
DFCT61157 - Battery Status indicator does not detect missing battery in Perc 4 DC.
-- percpro.dll, percpro.nlm, megalib 4.13
DFCT61967 Array Manager Utilities Help button does not work (no help file is displayed)
-- amutils.exe
514.0
No Support for Linux NT4 and NW4
megalib Windows 4.12 NW 4.11
Dr= Driver.
Controller Firmware NT4Dr W2kDr .netDr NW4.2Dr NW5.1Dr NW6.1Dr Linux
Perc2/SC (Quartz) 3.13 2.32 2.68 NA 2.06 2.06 6.01r
Perc2/SC (Quartz) on 8450 3.13 4.15 2.68 NA 3.12 6.01r 6.01r
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 NA 2.06 2.06 6.01r
Perc2/DC (Vail) x400+ Servers 1.06 4.15 2.68 NA 3.12 6.01r 6.01r
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) 1.71 4.15 5.32 6.26.25.32 3.12 6.01r 6.01r 1.18c
CERC ATA100/4ch(Ventura) 6.61 4.15 5.32 NA NA 6.01r 6.01r
CERC ATA/2S 2.6. 4.0. 4.0. 4.0. NA 6.06 6.06
Discovery ROMB 2.01 4.15 5.32 6.25.32 NA 6.01r 6.01r 1.18c
PERC 4SC/DC TM12 4.16 5.33 6.25 NA 6.01r 6.01r 1.18c
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger ROMB)
Perc3/Di (Boxster ROMB) 3166 4944 4944 4944 NA 3564 3564
Perc2/Si (Iguana ROMB)
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3562 4944 4944 4944 NA 3564 3564
U320 HBA BIOS-5.02.07.01 INBIOS 1.08.04 1.08.04 NA NA 1020000 1020000
PERC4 IM 1000600 1.08.04 1.08.04 NA NA 1020000 1020000
megalib 4.12
DFCT58985 Blink command on Avalon, has been fixed.
DFCT57222 Megalib prints out "Adapter # 0=Multi-lun Supported", has been fixed.
veritas build 3.3.514.0
DFCT58985 unnecessary underscore showed for the word Type in Create Volume Wizard
DFCT59019 Marble service crash after added the volume monitoring feature
DFCT61043 LSI driver couldn't be recognized during the Marble install in Windows.Net
-- dialog.rul
DFCT60957 AM 3.3 will not install, it fails the Perc2/DC Firmware Check
-- amcheckreq.dll
DFCT60988 AM utility reports wrong status for CERC ATA
-- amcheckreq.dll, amutils
DFCT60861 Marble install on Windows .NET-32 disables LDM, and there is no disk & vol mgmt
-- componentevent.rul
DFCT59942 Dell Array Manager Utilities shows unknown for Raid cards
-- amcheckreq.dll
CHNG60463 Add new traps 604 & 605 to MIB, code & MIB document.
and
CHNG59458 No trap for Marble events for Unmirror an virtual disk in Adaptec controller.
(Add traps for new events 606 & 607)
-- Files changed for both change requests:
WinPro/SNMPExt/SNMPTrap.cpp; WinPro/SNMPExt64/SNMPTrap.cpp; NWPro/SNMPPro/snmptrap.cpp
arymgr.mib, arymgr.bui, arymgr.cfg, amMIBStructure.doc
CHNG59632 Add new property to the MIB - Controller Table/Battery Charge Count
-- WinPro/SNMPExt/SNMPCommon.h
arymgr.bui, arymgr.mib, amMIBStructure.doc, MarbleMIBinVisio.vsd, MarbleMIBWin1.wmf
NWPro/SNMPPro/snmpcommon.h, snmpmib.h
CHNG59921 Update MIB version to 2.3 for both Windows 32 and NetWare.
-- WinPro/SNMPExt/SNMPCommon.h
NWPro/SNMPPro/snmptable.cpp
arymgr.bui, arymgr.mib, amMIBStructure.doc
DFCT60949 SNMP agent crashes master agent on W2K.
-- WinPro/SNMPExt/SNMPQuery.cpp
DFCT60902 EMM Firmware version blanked out: Normal polling was updating some enclosure objects with
information not properly populated.
-- percpro.dll,perc2pro.dll,aspipro.dll,percpro.nlm,perc2pro.nlm,aspipro.nlm
(no DFCT) FIRMWARE_VERSION not updated on DownloadFirmware. When you download firmware, the string that
Veritas uses to display EMM firmware version was not being updated.
-- percpro.dll,perc2pro.dll,aspipro.dll,percpro.nlm,perc2pro.nlm,aspipro.nlm
DFCT61197 Roll short OID SNMP patch issue into 3.3.0 for both Windows 32 and NetWare.
-- WinPro/SNMPExt/SNMPQuery.cpp
NWPro/SNMPPro/SNMPQuery.cpp
DFCT61200 When you create VD, do not scan newly create VD for old partitions, just blast them away.
-- percpro.dll
CHNG60730 When you rename VD, call RescanHostDisk to get Veritas to pick up changes.
-- percpro.dll,perc2pro.dll
513.0
Megalib 4.11 NW fixes:
CHNG47367 Adapter Capabilites Call has been implemented
DFCT57494 GET_DRIVE_TYPE API has been fixed for Avalon - GEM318 processor
DFCT56869 GET_CONTROLLER_ACTIVITY_INFO has been fixed for Avalon.
DFCT53800 Passthru call fails from DIAGTESTER on Shredder HP.
DFCT58795 Resync percentage problem on Shredder HP.
(No DFCT) Install Whistler 64 and Whistler 32 in the same way
DFCT58270 driver for perc3 is out of date. driver needs to be 5.32 or greater.
-- amcheckreq.dll
DFCT58350 SNMP traps are not being sent when the NT4 event log is full.
-- SNMPInit.cpp (SNMPExt project)
DFCT59808 Fix hotspare going offline and staying offline in the following cases:
cluster config: EMM firmware download on one side
remove enclosure: remove and reinsert enclosure
-- percpro.dll, percpro.nlm
(no DFCT) Build clean up. Eliminate warnings due to duplicate definitions of alert GUIDs. Also eliminate WAIT_TIMEOUT dup
definition in both ws_nlm.h and vxos_func.h. Eliminate duplicate definition of wclogger in wcsfuncs.cpp.
-- percpro.nlm,aspipro.nlm (also affects debug versions of percpro.nlm and aspipro.nlm)
CHNG58712 add pop up msg to inform the users corrective procedures in case of any failure
-- percmsg.dll
DFCT60327 Cancel Format on Adaptec could cause the Failed Redundancy
-- perc2ext.dll (remove option to cancel)
DFCT60386 Marble reports firmwar level incorrectly
-- perc2pro.dll, perc2pro.nlm
DFCT60364 Correct fan and power supply part numbers in MIB & code.
-- SNMPCommon.h (WinPro/SNMPExt project), SNMPCommon.h (NWPro project), arymgr.bui, arymgr.mib, amMIBStructure.doc
(no DFCT) Message clean up. Eliminate ConsolePrintf statements in NetWare version of ASPIPRO:
1) ASPI Provider Loaded, 2) CDROM eject and load IOCTL messages, 3) TAPE eject, load, erase IOCTL messages, etc.
-- aspipro.nlm
DFCT60666 Add VXVAL_SMART_ALERT_STATE_LL to disks with predicted failure. This makes handling of SMART alerts more consistent
between the controllers. (The disks will turn yellow and the properties page says, SMART: Failure predicted).
-- percpro.dll,percpro.nlm
512.1
megalib Windows 4.11 NW 4.09
Dr= Driver.
Controller Firmware NT4Dr W2kDr NW4.2Dr NW5.1Dr NW6.1Dr .NetDr Beta Linux No Support
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06 6.01e
Perc2/SC (Quartz) on 8450 3.13 4.15 2.68 3.12 6.01n 6.01n
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06 6.01e
Perc2/DC (Vail) x400+ Servers 1.06 4.15 2.68 3.12 6.01n 6.01n
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) 1.71 4.15 5.32 3.12 6.01n 6.01n 6.24 1.18a
CERC ATA100/4ch(Ventura) 6.61 4.15 5.32 NA 6.01n 6.01n
Discovery ROMB 2.01 4.15 5.32 NA 6.01n 6.01n 6.24 1.18a
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger ROMB)
Perc3/Di (Boxster ROMB) 3166 4944 4944 NA 3564 3564
Perc2/Si (Iguana ROMB)
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3562 4944 4944 NA 3564 3564
U320 HBA BIOS-5.02.07.01 1.00.09.00 1.08.04 1.08.04 1.01.00.00 1.01.00.00
DFCT59354 Need to rename Subsystem in Utilities to match Tree change
-- servmgr.rc
DFCT58506 SNMP returns wrong value for Virtual Disk layout.
-- arymgr.bui, arymgr.mib, amMIBStructure.doc
DFCT59702 Blink/Unblink Virtual Disk greyed out for Raid-10 & Concatenation of Raid-1
-- perc2pro.dll, perc2pro.nlm
DFCT59704 Trap #600 severity (critical) does not agree with User Document (warning).
-- arymgr.bui, arymgr.mib, arymgr.cfg, amMIBStructure.doc
DFCT59611 duplicate hot keys of Alt+A for Array Disks & Name for Adaptec controllers
DFCT59612 Express Mode & Custom Mode options don't have hot keys for LSI & Adaptec
DFCT59670 duplicate hot keys of Alt+N for Minimum Size & Next for Adaptec controllers
-- percext.dll, perc2ext.dll
DFCT58948 Reconfigure of concatnated VD to concatnated VD need add another drive
CHNG59458 no trap from Marble Events for Unmirror a virtual disk in Adaptec controller
-- perc2msg.dll, perc2pro.dll, perc2pro.nlm
DFCT59806 Array manager fails to install on Shredder HP
-- amcheckreq.dll
CHNG59459 we need the option to be able to cancel the format for a virtual disk
-- perc2ext.dll, perc2pro.dll, perc2pro.nlm
DFCT59447 Cannot tell if partition is system or boot partition on adaptec controllers
-- perc2msg.dll, perc2pro.dll, perc2pro.nlm
CHNG58917 Display "?" as temperature if the temp probe state is unknown (value=6)
-- percpro.dll,percpro.nlm,perc2pro.dll,perc2pro.nlm,aspipro.dll,aspipro.nlm
DFCT58854 Marble not showing degraded state of VD during initial scrub and after initial
scrub is aborted
-- perc2pro.dll,perc2pro.nlm,perc2ext.dll
CHNG58861 Would like Marble to add "suspend" option on consistency checks
-- perc2pro.dll,perc2pro.nlm,perc2ext.dll
DFCT58953 Long delay for disk signature notice. Zero out hidden sectors on CreateVD (erases
old data when VD created on PERC controller family).
-- percpro.dll
512.0
DFCT53800 Passthru call fails from DIAGTESTER on Shredder HP.
DFCT58795 Resync percentage problem on Shredder HP.
-- megalib 4.11
DFCT57808 Remote Connection dialog box doesn't have the hot key
-- veritas 3.3.412.0
DFCT59064 Trap #585 severity conflict between MIB & documentation.
-- arymgr.bui, arymgr.mib, arymgr.cfg, amMIBStructure.doc
DFCT59352 duplicate hot key Alt+e for Rename & Check Consistency for Adaptec controllers
-- percext.dll, perc2ext.dll
CHNG58471 Don't put number in Rename edit box or allow special chars
-- percext.dll, perc2ext.dll
CHNG59206 Marble should allow Decimal point for size in creating/transforming.
-- percext.dll, perc2ext.dll
DFCT59104 Blink/unblink commands removed for Shredder AND Perc 4/im.
-- percpro.dll,percpro.nlm
DFCT57815 Marble dependency check does not detect if station piece is already installed.
-- amcheckreq.dll
511.0
veritas build 3.3.511.0
CHNG55676 Unneeded default headers displayed in Marble properties panel
CHNG58524 'Graphical layout' inconsistent under different Marble screens
CHNG55271 AMCLI option to dump ( in a file ) the following data base
-- amcli.exe
DFCT58904 Dedicated Hot Spare feature is always greyed out in Cerc ATA100/4ch controller
-- percpro.dll, percpro.nlm
DFCT58961 Automation fail to run because there are 2 blank spaces in right click command
-- percext.dll
CHNG58667 Create Virtual Disk button still enable even there is no more disk for Perc 4/IM
-- percpro.dll, percpro.nlm
CHNG16365 Array subsystem assignment is confusing
-- percpro.dll, percpro.nlm, perc2pro.dll, perc2pro.nlm
DFCT58612 Array Manager Install does not recognize PERC3 controllers and/or Firmware
-- amcheckreq.h
DFCT58228 Autry fail to install Array Manager
-- amcheckreq.dll
DFCT45659 EMM Firmware Update using Marble in cluster environment. On a rescan, update the
following objects EMM: Firmware version, Enclosure: CONFIG (split bus, joined bus, etc.),
Application version, Kernel version, Split bus part number, Backplane part number
-- percpro.dll, perc2pro.dll, percpro.nlm, perc2pro.nlm
DFCT58650 View report doesn't display array disks on NetWare 6. (Actually caused by lack of support
for SAFTE devices at SCSI ID 15). Added support for non-enclosure channels (migrated fix
from PercExt). Added support for cdrom drives and tape drives.
-- aspiext.dll
510.0
veritas build
DFCT57735 Missing the title 'Create Volume Wizard' during the create volume process
CHNG57329 blink & unblink for disks & VD should be remove for Perc 4/IM
-- percpro.dll, percpro.nlm
CHNG51951 drive mapping problem when split the backplane in Raid/SCSI mode in 2600 Romb
-- percpro.dll
DFCT58175 Raid 10 option should be taken out because it is not possible in this scenario
-- percpro.dll, percpro.nlm
CHNG48929 Marble 3.3 changes for Savage 1.0
-- percpro.dll, percpro.nlm, lsiver.ini
DFCT58008 error message when Enable Alarm on Perc 4/Di controller
-- percpro.dll, percpro.nlm
CHNG48399 Gem318 support on PE1600(Avalon) server. This performs blink disk during prepare to remove
operation on GEM318 SAFTE processor (internal backplane). Note that MegaLib currently does
not blink the disks on Avalon when commanded to do so.
-- percpro.dll, percpro.nlm
DFCT58090 Duplicate message in Array Manager's dependency check
-- amcheckreq.dll
509.0 (3.3.0)
DFCT56986 Name field is too short to accommodate complete name
-- veritas 3.2.509.0
DFCT56856 Marble couldn't detect the Perc 4/IM driver & firmware during the install
-- amcheckreq.dll, dialog.rul
DFCT57650 Adaptec create VD does not write generic name to the disk
-- perc2pro.dll, perc2pro.nlm
DFCT57638 changing Raid type will delete VD name in Express mode
-- percext.dll
DFCT57648 cannot show/hide array disks if controller is busy
-- percpro.dll, percpro.nlm
DFCT57305 error message when try to flush the Perc 4/IM
DFCT57306 error message when Disable Alarm for the Perc 4/IM
DFCT57321 error message whenever change the rebuild rate in Perc 4/IM
DFCT57232 Array Mgr (3.2 X02, Bld 507.0) - Can not select controller for virtual disk...
-- percpro.dll, percpro.nlm, percext.dll
CHNG38501 I'd like to be able to rename my virtual disks in Marble
-- percpro.dll, percpro.nlm, percext.dll, perc2pro.dll, perc2pro.nlm, perc2ext.dll
DFCT56333 Fixup support for Avalon and Shredder. The Perc 4/im detection logic created problems at the
end of Marble 3.2 release (DFCT57386). I have improved upon the logic to handle many more cases
that were not being handled before. There is still a problem if a controller does not have any
attached devices. This is a known problem with Microsoft Windows and is not likely to be fixed
anytime soon. What may happen with SCSI subsystem is that we will fail to display a controller
that has no attached devices. This is deemed a more acceptable solution that showing the same
unused controller twice in the tree.
-- aspipro.dll
DFCT57525 Blink disk with U320 on Discovery. Use SAFTE command to match disk and slot instead of old
logic that does not consistenly work with split internal backplanes.
-- aspipro.dll, aspipro.nlm
508.1
DFCT57386 Back out changes to detect Perc 4/im in SCSI subsystem. The port mapping for MPI interface
does not match ASPI mapping, so I need to obtain the MPI numbers using the registry and then
match up the adapter numbers. This will only be fixed properly in 3.3, but I don't need to
support Perc 4/im in 3.2.
-- aspipro.dll
508.0
megalib v4.09
DFCT56917 rescan will not bring back a new disk in Perc 4/Di controller
-- percpro.dll, percpro.nlm, perc2pro.dll, perc2pro.nlm
DFCT56669 Marble doesn't automatically display tree structure alert after Zappa powers off
-- percpro.dll, percpro.nlm, perc2pro.dll, perc2pro.nlm
CHNG48108 PERC 4/im (Shredder HP) support for Marble 3.3
-- percpro.dll, percpro.nlm, percext.dll
DFCT41008 Marble Utils have memory leaks
-- nw_tab.cpp, nw_tab.h and servmgr.dsp
DFCT56821 Thermal shutdown, No event saying indicating Enclosure is shutting down.
-- percpro.dll, percpro.nlm, percmsg.dll, perc2pro.dll, perc2pro.nlm, perc2msg.dll, aspimsg.dll, aspipro.dll, aspipro.nlm
DFCT56850 View Readme doesn't have a hot key in System Requirements - for Local Serer only
-- _isuser.rc, _isuser.dll
DFCT43442 NonDell Marble Modify and Repair install AMI/Adaptec providers
-- support.rul
DFCT56600 Array Manager fails to install on discovery with an added Perc 3DC
-- amcheckreq.cpp
DFCT55378 Deleting quorum disk with MSCS causes system hangs. Now popup 2 message boxes to warn the user
that deleting cluster resources with MSCS running is a really bad idea.
-- percpro.dll, percext.dll
DFCT56947 & DFCT56333 Both Avalon and Shredder systems were showing "Ultra 320 controllers" when they should
not have been. Change logic to not display non-RAID U320 controllers that cannot be ID-ed.
-- aspipro.dll
DFCT56990 Perc 3 161J firmware does not generate a warning message in utilities
-- amcheckreq.cpp
DFCT57133 Marble Hangs following rescan of Perc 3 QC or Perc 2 DC controller
-- support.rul, setup.rul, dialog.rul and perc.rul
(no DFCT) Show the temperature and state on all TEMP PROBE alerts. This will help user to figure out why
their system shutdown due to thermal shutdown logic.
-- percpro.dll,percpro.nlm,perc2pro.dll,perc2pro.nlm,aspipro.dll,aspipro.nlm
CHNG57118 Add new events 602 and 603 to the Marble MIB, code and documentation.
-- arymgr.bui, arymgr.mib, arymgr.cfg, amMIBStructure.doc,
-- WinPro:SNMPExt project - SNMPTrap.cpp
-- WinPro:SNMPExt64 project - SNMPTrap.cpp
-- NWPro project - snmptrap.cpp
DFCT56339 SNMP terminates unexpectedly
-- Winpro:SNMPExt project - SNMPQuery.cpp, SNMPInit.cpp, SNMPCommon.h
DFCT56915, DFCT56917, DFCT56942?
Fix rescan of 2nd+ controller for both ControllerRescan and BusRescan commands.
-- percpro.dll, percpro.nlm, perc2pro.dll, perc2pro.nlm
DFCT566669 Marble doesn't automatically display tree structure alert after Zappa powers off
-- aspipro.dll, aspipro.nlm
(no DFCT) amcli modifications. Return a controller busy error message if checking consistency of more that one VD
belonging to the same controller
veritas build 3.2.508.0
DFCT55866 Discovery of nodes under My Network Places folder not working properly
DFCT55387 Marble pop-up false error messages
DFCT55671 EMM firmware version is not displayed
DFCT56868 Check version has the wrong name from the menu bar, Help
507.0
megalib v4.08
Dr= Driver.
Controller Firmware NT4Dr W2kDr NW4.2Dr NW5.1Dr NW6.1Dr .NetDr Beta Linux No Support
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06 6.01e
Perc2/SC (Quartz) on 8450 3.13 4.15 2.68 3.12 6.01n 6.01n
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06 6.01e
Perc2/DC (Vail) x400+ Servers 1.06 4.15 2.68 3.12 6.01n 6.01n
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) 1.71 4.15 5.32 3.12 6.01n 6.01n 6.24 1.18a
CERC ATA100/4ch(Ventura) 6.61 4.15 5.32 NA 6.01n 6.01n
Discovery ROMB 1.99 4.15 5.32 NA 6.01n 6.01n 6.24 1.18a
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger ROMB) 3153 4933 4933 NA 3546 3546
Perc3/Di (Boxster ROMB) 3157 4933 4933 NA 3546 3546
Perc2/Si (Iguana ROMB) 3552 4933 4933 NA 3546 3546
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3546 4933 4933 NA 3546 3546
U320 HBA BIOS-5.02.03.01 1.08.02 1.08.02
veritas build 3.2.507.0
DFCT56505 Hidden Button & Tool Bar Help button is linked to utilities instead of help
CHNG54032 Create Virtual Disk via quick access window: need more info in Select Ary grp
DFCT53930 Missing folders from Marble tree when connecting via cmd line on remote servers
CHNG55272 Option on help menu to display only Versions tab of amutils
DFCT55708 Array mgr does not 'see' tape drive attached to LSI 22320 U320 adapter
DFCT56249 click on Help button will launch the Array Manager Utilities
ADDED IM support
-- percpro.dll, percpro.nlm, percext.dll
DFCT55564 Enclosure's L.E.Ds are Blinking constantly without performing any operation
-- percpro.dll, percpro.nlm
DFCT54073 Custom Mode RAID-5 VD creation calculation is wrong.
-- percext.dll
CHNG53983 Add support of U320 EMMs in PV22xs (aka Zappa 2) to SCSI provider
-- aspiext.dll
DFCT56376 Add hot key for "Blink selected array disks..." control
-- percext.dll
DFCT51447 Prepare to Remove Followed by Rescan should not disable Right Click Operation
-- perc2pro.dll, perc2pro.nlm, ambus.cpp
DFCT52880 During Upgrade Progress Bar does not get populated
-- setup.rul
CHNG55650 NetWare implementation of tape autoloader (media changer) support.
-- aspipro.nlm
DFCT55946 Install from appcd32_x00: AMcheck Dr Watson
megalib v4.07
Dr= Driver.
Controller Firmware NT4Dr W2kDr NW4.2Dr NW5.1Dr NW6.1Dr .NetDr Beta Linux No Support
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06 6.01e
Perc2/SC (Quartz) on 8450 3.13 4.15 2.68 3.12 6.01n 6.01n
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06 6.01e
Perc2/DC (Vail) x400+ Servers 1.06 4.15 2.68 3.12 6.01n 6.01n
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) D170 4.15 5.32 3.12 6.01n 6.01n 6.24 1.18a
CERC ATA100/4ch(Ventura) 6.61 4.15 5.32 NA 6.01n 6.01n
Discovery ROMB TD15 4.15 5.32 NA 6.01n 6.01n 6.24 1.18a
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger ROMB) 3153 4933 4933 NA 3546 3546
Perc3/Di (Boxster ROMB) 3157 4933 4933 NA 3546 3546
Perc2/Si (Iguana ROMB) 3552 4933 4933 NA 3546 3546
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3546 4933 4933 NA 3546 3546
U320 HBA BIOS-5.02.03.01 1.08.02 1.08.02
DFCT55675 Unable to change Qlimit setting in Array Manager with Netware.
-- pv660_vxreg.dat
CHNG56386 "Prepare to Remove" not always available on adaptec controllers
-- perc2pro.dll, perc2pro.nlm, perc2ext.dll
CHNG54809 Make sure the NetWare and Windows SNMP extension agents are in synch.
-- NWPro project - snmpget.cpp, snmpquery.cpp, snmptable.cpp, snmpcommon.h, snmpmib.h, snmptrap.h
506.0
DFCT55635 Charge count is incorrect. No method for reconditioning battery.
-- percext.dll
CHNG55123 Add events 980 and 981 to the MIB and MIB documentation.
-- arymgr.mib, arymgr.bui, arymgr.cfg, amMIBStructure.doc, SNMPTrap.cpp (SNMPExt proj), SNMPTrap.cpp (SNMPExt64 proj)
DFCT54187 Zappa firmware download fixes (NetWare version) Windows version fixed in 505.0.
-- aspipro.nlm
CHNG55677 Add new properties to the Marble MIB for channel SCSI ID and enclosure SCSI ID.
-- arymgr.bui, arymgr.mib, SNMPCommon.h (SNMPExt project), SNMPQuery.cpp (SNMPExt project), amMIBStructure.doc
DFCT55035 AUTRY: X02, 3.2.1 - No support as of yet for LSI RAID controller...
DFCT55569 Fix DownloadFirmware so that there is no chance of failure at end due to use of freed pEmmIds memory:
fix was found in AspiPro.
-- percpro.dll, percpro.nlm
DFCT55720 Random deletion caused loss of boot drive: routine to erase VD before deletion is very dangerous and
deadly if LSI's drive mapping doesn't keep up with random deletion of VDs. Made changes to stop
erasing partition info before deleting VD.
-- percpro.dll
DFCT55772 Do not show download button until user has found FW to download to PV22xS enclosure. This eliminates
possibility of bogus error if they hit download before locating firmware.
-- perc2ext.dll,percext.dll,aspiext.dll
DFCT41576 something still left behind in the Registry after the uninstall
-- support.rul
CHNG55650 Add tape autoloader support. Also use Dell Inquiry page for tape devices that support it.
Note: this is windows only implementation for this release only. Will get NetWare implementation
in next week's build.
-- aspipro.dll
Megalib v4.08
DFCT53800 SCSI Pass-thru calls (only READ) are supported for Shredder HBA.
CHNG19871 Implemented a new API call which generates information files required by MegaSimulator.
User can copy those files to a different system and run Marble in simulator mode.
505.0
megalib v4.07
Controller Firmware NT4Dr W2kDr NW4.2Dr NW5.1Dr NW6.1Dr .NetDr Beta Linux No Support
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06 6.01e
Perc2/SC (Quartz) on 8450 3.13 4.15 2.68 3.12 6.01n 6.01n
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06 6.01e
Perc2/DC (Vail) x400+ Servers 1.06 4.15 2.68 3.12 6.01n 6.01n
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) D170 4.15 5.32 3.12 6.01n 6.01n 6.24 1.18a
CERC ATA100/4ch(Ventura) 6.61 4.15 5.32 NA 6.01n 6.01n
Discovery ROMB TD15 4.15 5.32 NA 6.01n 6.01n 6.24 1.18a
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger ROMB) 3153 4933 4933 NA 3546 3546
Perc3/Di (Boxster ROMB) 3157 4933 4933 NA 3546 3546
Perc2/Si (Iguana ROMB) 3552 4933 4933 NA 3546 3546
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3546 4933 4933 NA 3546 3546
U320 HBA BIOS-5.01.07 1.08.02 1.08.02
DFCT54982 SNMP agent reports all NULL
-- SNMPQuery.cpp
DFCT55094 Marble dependency check fails when doing install using Autry 3.1.1 X08
-- amcheckreq.cpp
DFCT53868 Marble needs automatically uninstall FAST 2.5 to prevent 7B blue-screen on W2K
-- dialog.rul
CHNG54171 New Disk blink feature significantly slows custom mode large VD creation process
-- percext.dll, perc2ext.dll -- added checkbox to control blink
DFCT54970 Update caption of "Set Tag Data" command to "Set Tag Data". This was migration of fix
from PercPro to AspiPro.
-- AspiExt.dll
DFCT54124 Hot keys for SCSI provider. This was migration of fix from PercPro to AspiPro.
-- AspiExt.dll, PercExt.dll
DFCT54187 Zappa firmware download fixes (Windows version)
-- aspipro.dll, aspiext.dll, aspimsg.dll
Veritas build 3.2.505.0
DFCT54223 Missing some hot keys for the Add Categories windows
DFCT49625 Delete button from the button menu doesn't work in NW (Packets out of order !!)
DFCT53794 Red cross mark on Powersupply does not go away when it change from bad to good
CHNG53519 Show/Hide... does not takes effects in left pan until collapse/expand the tab
CHNG51958 Request to add a drop down list to the 'connect to computer' window
504.1
DFCT54364 Asset Tag & Asset Name don't have the hot keys in Set Tag Data window
-- percext.dll, perc2ext.dll, aspiext.dll
CHNG50969 3 more hot keys needed in Temperature Probe Properties window
-- percext.dll, perc2ext.dll, aspiext.dll
DFCT54449 missing few hot keys for the Marble install wizards
-- _isuser.dll
DFCT54190 Fan properties does not show word Normal. This was migration of fix from PercPro to
AspiPro.
-- Aspipro.dll, aspipro.nlm
(no DFCT) Modified display of U320 controllers: "LSI 1030" is displayed for Discovery
in SCSI/SCSI mode. "LSI 22320" is display for 22320 PCI card. Also do not
display Perc 4/im controllers on Shredder and Avalon. This was causing grief on these
projects since the same controllers were showing up twice.
-- aspipro.dll
megalib 4.0.7.0
DFCT53886
1. MegaLib is no longer reporting controller if ALL the channels are in SCSI Mode.
2. Implemented a new API call which gives Drive Mapping information of SCSI channels along with RAID channels.
DFCT54197 marble couldn't detect the Perc 3/QC controller during the installation
DFCT44858 Mgmt Station upgrade from Marble 2.5 to 3.1.1 (Autry 1.6 to 3.0)
-- support.rul
504.0
DFCT53594 Can not unassign Global HS if DHS is there
-- percpro.dll & nlm
DFCT54270 Can not redownload FW after Bad FW download to Zappa.
-- percpro.dll & nlm, perc2pro.dll & nlm
DFCT51707 Marble event not logged if container degraded during shutdown or boot
-- percpro.dll & nlm, perc2pro.dll & nlm
DFCT54076 problems on LSI creating partial size concat VDs
-- percpro.dll & nlm
CHNG53088 Modify Array Manager install to set entries to recognize NW Partitions
-- vxreg.rul
DFCT53700 Marble cannot install with .NET build 3621
-- amcheckreq.cpp
DFCT53483 PERC4 DI warning message during Autry 3.1.1 MN custom install
-- megalib 4.0.6.1
DFCT47745 Marble 493.2 uses wrong cache defaults
-- percext.dll
CHNG52612 Make changes to MIB so it will load event info into HP OV via GUI.
-- arymgr.bui, arymgr.mib, arymgr.cfg, arymgrtocim
DFCT43564 Help button changes got backed out of ASPIpro. This re-implementes
those changes (reimplemented HELP button in firmware download--SCSI subsystem).
-- aspiext.dll
CHNG52724 Allow users to create/delete virtual disks while in cluster mode. The new
restriction is that we check and make sure that the other node is down before
allowing the operation.
-- percpro.dll, percext.dll
DFCT54088 AM shows and makes Autry show false Dependency message
-- lsiver.ini
DFCT54178 Array Manager Utility reports wrong status of U320 card
-- megalib 4.0.6.1
CHNG45451 Include support for windows xp 32-bit in Service Manager(AmUtils)
-- versiontab.cpp
DFCT52873 error message showed up at the end of marble install in NW6
-- aminst.cpp
DFCT54108 Autry fails to uninstall Marble after a Managed Node install
--Amcheckreq.cpp
Veritas build 3.2.504.0:
DFCT53599 Do not assign any drive letter' doesn't have a hot key in Modify Drive Letter
DFCT53464 Cursor shape does not change when points to a web link
DFCT34053 Create VD button is missing in toolbar
DFCT53246 Disk policy change not properly updated within AM console
DFCT52195 Marble run from DSA tells user to look at events tab for error, which isnt there
CHNG08118 Delete volume event not specific enough -- need to add driveletter
503.0
DFCT52438 missing hot keys for Volume Lable & Allocation Unit Size in Format Volume wizard
-- veritas build 3.2.503.0
DFCT34029 Mouse cursor issues on marble
-- veritas build 3.2.503.0
DFCT53488 warning message during MN custom install of storage management
-- amcheckreq.cpp
megalib v4.06
Controller Firmware NT4Dr W2kDr NW4.2Dr NW5.1Dr NW6.1Dr .NetDr Beta Linux No Support
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06 6.01e
Perc2/SC (Quartz) on 8450 3.13 4.14b 2.68 3.12 6.01l 6.01l
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06 6.01e
Perc2/DC (Vail) x400+ Servers 1.06 4.14b 2.68 3.12 6.01l 6.01l
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) D170 4.14b 5.32 3.12 6.01l 6.01l 6.24 1.18a
CERC ATA100/4ch(Ventura) 6.61 4.14b 5.32 NA 6.01l 6.01l
Discovery ROMB TD15 4.14b 5.32 NA 6.01l 6.01l 6.24 1.18a
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger ROMB) 3153 4933 4933 NA 3546 3546
Perc3/Di (Boxster ROMB) 3157 4933 4933 NA 3546 3546
Perc2/Si (Iguana ROMB) 3552 4933 4933 NA 3546 3546
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3546 4933 4933 NA 3546 3546
U320 HBA Bios 5.01.04 1.06.00 1.08.00 1.08.00
DFCT53425 Marble should block when detecting multiple LDs in same array
-- percpro.dll, percpro.nlm
DFCT53423 Right clicking a drive out of the pair shows Properties greyed out
-- percpro.dll, percpro.nlm
DFCT53164 grammatical error 'Needs Replaced' for Battery Status in Controller Properties
-- percext.dll, perc2ext.dll
DFCT53369 "Unknown Perc" is detected during installation of marble
-- amcheckreq.cpp
DFCT53370 AMUtils.exe does not run on my PE300 (Newt), crashing with no error msg or event
-- amcheckreq.cpp
DFCT52627 Apply button in the Format window has always been greyed out or disabled
-- veritas build 3.2.502.0
DFCT52432 Missing a hot key for Total Volume Size in the Create Volume Wizard
-- veritas build 3.2.502.0
DFCT53430 AM Utility reports Warning message
-- amcheckreq.cpp
501.2
DFCT51911 Blink option doesn't stop for some disks after deslect one of the partial disks
-- percext.dll
DFCT52845 Perc 3/DC controllers couldn't be detected during the marble install
-- amcheckreq.cpp
DFCT52299 Perc2pro.nlm is missing after install & after restart the server in NW6
DFCT52877 Blink and unblink commands were visible with hard disks on Gecko system. These disks
are attached to non-RAID SCSI controller with ribbon cable; they're not in an enclosure.
Blink and unblink do not work.
-- aspipro.dll, aspipro.nlm
DFCT52873 error message showed up at the end of marble install in NW6
-- Aminst.C
DFCT52942 During Marble MN/MS install via Autry a pop-up is displayed
--AlterCurrentSystem.rul, RestoreCurrentSystem.rul
DFCT52916 Marble 3.2 silent install/uninstall looks for DCOMDB.NLM
-- Uninstall.cpp
DFCT45654 Marble local NetWare install does not support 2.06 pedge.ham driver
-- Aminst.C
DFCT53083 Change names of SCSI subsystem controllers to "generic" names: "Ultra SCSI",
"Ultra2 SCSI", "Ultra 160 SCSI", and "Ultra 320 SCSI"
-- aspipro.dll, aspipro.nlm
CHNG50447 Use a File of Adapter ID and Driver Matrix instead of Hard Coding.
-- amcheckreq: amcheckreq.cpp, amcheckreq.h, amcheckreq.def
install: dialog.rul, setup.rul, default.shl, value.shl
amutils: versiontab.cpp, versiontab.h
CHNG31225 no hot keys in Task menu when the VD or Array Group is selected
-- extendcomponent.cpp in percext and perc2ext
DFCT28709 Fix bogus rebuild errors in cluster mode--ignore ACCESS_DENIED errors in cluster mode
and continue on.
-- percpro.dll
501.1
DFCT51956 Backplane Enclosure Properties couldn't show 'Split Bus' even it is split mode
-- aspiext.dll
DFCT52859 marble Help doesn't work for Custom install or Re-install marble
DFCT52860 Marble Readme file couldn't launch in marble 3.2.501 build
DFCT52878 error message when launched Array Manager Utilities Help
DFCT52819 Severity was not propagating up the tree when a power supply failed or when a disk had SMART
alerts. Caused by change to object tree (new GUI). Migration of fix from PercPro to AspiPro.
-- aspipro.dll, aspipro.nlm
501.0
Megalib 4.0.6.0
DFCT46686 Rescan will not update the status in Osidian controller
-- perc2pro.dll, perc2pro.nlm
DFCT52558 Performing a Rescan in Marble does not rescan a PERC3/xC card
-- percpro.dll, percpro.nlm
CHNG33609 Add Perc 3/Qc and Perc 3/DC battery recharge information
-- percpro.dll, percpro.nlm, percext.dll
DFCT51963 Console only installation add multiple system to the favorites list
DFCT51967 Connected system no show in History list with console only installation
DFCT49594 Hide and Show array disk option is not function correctly in Marble
-- Veritas build 3.2.0.501.0
DFCT51897 Dr. Watson error during install -- AMCheck.exe causing DrWatson.
-- amcheckreq.cpp, BuildVersion.h
DFCT52302 error message when uninstall Marble in NW6 systems
-- dcproapi.nlm
DFCT52296 Marble 3.2 install gives Warning on CERC 661-level FW
-- value.shl
DFCT51577 marble gives driver warning when installing on pe2600
-- value.shl
(no DFCT) fix error in verfile.cpp (win+NW) so it can read controllers without a space in the name
-- amcommon.nlm, amcheckreq.dll
DFCT46579 error message when delete a VD which has the dedicated hot spare with it
-- percpro.dll, percpro.nlm
DFCT52288 dr. watson when launched AM Utilities in Discovery with SCSI/SCSI mode in NT
-- amcheckreq.dll
DFCT52290 Marble couldn't recognize U320 driver in SCSI/SCSI mode during installation
-- amcheckreq.dll
DFCT50629 Marble 3.2 with 40 LD created has duplcate virtual disk numbers
-- percpro.dll, percpro.nlm
DFCT50657 same disk number after deleted & re-created virtual disk in W2K
-- percpro.dll, percpro.nlm
DFCT52188 Reset configuration fail with hot spare only on LSI controllers in NetWare 6.0
-- percpro.nlm
DFCT51956 Backplane Enclosure Properties couldn't show 'Split Bus' even it is split mode
-- percext.dll, perc2ext.dll
DFCT52291 Due to new version of MegaLib (4.06) PercPro started seeing the LSI non-RAID SCSI
controllers. This creates a problem since they currently are being managed by
ASPIPro. Add logic to handle failure of GET_ADAPTER_VENDOR_INFO, ignore certain
LSI controllers, and other items to make PercPro more resilient.
-- percpro.dll, percpro.nlm
500.3
Megalib 4.0.6.0
fixes:
1) DFCT50850 Marble hung during some operations in Discovery platform in W2K
2) DFCT50654 Marble hung after deleted & re-created virtual disk in W2K
3) CHNG51150 Marble could generate error message after came back from hibernation mode
4) DFCT52401 Update of onboard U320 driver causes blue screen when marble is installed
DFCT51952 all hard-drives on Discovery Romb couldn't show the serial number
-- megalib 4.0.6 or FW TD15
DFCT52017 can't assign Global Hot Spare without a virtual disk in W2K
-- percpro.dll, percpro.nlm
DFCT51755 ROMB battery status not reported correctly
-- perc2pro.dll, perc2pro.nlm
DFCT51335 Status of RAID-10 VD incorrect
-- perc2pro.dll, perc2pro.nlm
DFCT50922 duplicate hot keys Alt+N in Virtual Disk Reconfiguration window
-- perc2ext.rc
DFCT50924 2 different hot keys have the same function in Virtual Disk Reconfiguration
-- percext.rc
DFCT51276 error message when create a concatenated virtual disk using partial disk size
-- perc2pro.dll, perc2pro.nlm
DFCT51039 assign global hot spare not functioning in netware
-- megalib.nlm
DFCT50851 Change ASPIPro message numbers to be consistent with other providers. Needed for SNMP support.
Also, change some PERC literals in code to use ASPI literals, which should eliminate some
miscellaneous problems.
-- aspipro.msg, aspipro.dll, aspiext.dll aspipro.nlm
DFCT49027 Fix handling of device updates: use property sheet to minimize updates and to send group of
changes in single update. Recommended by Veritas.
-- aspipro.dll, aspipro.nlm
(no dfct) Fix handling of context menu for SCSI devices: only change enable/disable when status changes,
instead of show/noshow. ASPIPro is now consistent with other providers.
-- aspipro.dll, aspipro.nlm
DFCT49644 Removed sound commands for Perc 4/Di. This is a ROMB controller and there is no sound/beep
thing on the controller.
-- percpro.dll, percpro.nlm
500.2
DFCT51291 Random LUN Deletion abends the netware 5.1 server
-- percpro.nlm
DFCT51643 can't cancel consistency check from parent of RAID-10 on perc2pro
-- perc2pro.dll, perc2pro.nlm
500.1
megalib.nlm v4.04
Controller Firmware NT4Dr W2kDr NW4.2Dr NW5.1Dr NW6.1Dr .NetDr Beta Linux No Support
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06 6.01e
Perc2/SC (Quartz) on 8450 3.13 4.14b 2.68 3.12 3.12 6.01j
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06 6.01e
Perc2/DC (Vail) x400+ Servers 1.06 4.14b 2.68 3.12 3.12 6.01j
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) 1.70 4.14b 5.31 3.12 6.01j 6.01j 6.23 1.18.5b
CERC ATA100/4ch(Ventura) 661 4.14b 5.31 NA 6.01j 6.01j
Discovery ROMB TD13 4.14b 5.31 NA 6.01j 6.01j 6.23 1.18.5b
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger ROMB) 3153 4933 4933 NA 3546 3546
Perc3/Di (Boxster ROMB) 3157 4933 4933 NA 3546 3546
Perc2/Si (Iguana ROMB) 3552 4933 4933 NA 3546 3546
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3546 4933 4933 NA 3546 3546
U320 HBA Bios 5.01.02 10.00 1.04 1.04
DFCT51287 scheduling for consistency check utility broke on LSI controllers
-- amcli.cpp
(no DFCT) Hide child Vds of RAID-10 and Concat RAID-1 on Adaptec controllers
-- amcli.cpp
(no DFCT) Print copyright information in amcli
-- amcli.cpp
(no DFCT) Cancelling consistency checks on RAID-10 and Concat- RAID-1 on Adaptec controllers
--amcli.cpp
DFCT51123 ITA 6.3 is not receiving right SNMP trap about hotspare on LSI controllers.
-- Netware SNMPPro project: snmptrap.cpp
(no DFCT) Added code for another thread spawned by the SNMPExtensionInit function to build the data separate from query
processing. This will prevent queries from being satisfied when the database is locked.
-- SNMPExt project: SNMPInit.cpp, SNMPQuery.cpp, SNMPCommon.cpp, SNMPInit.h
(no DFCT) Added code to prevent multiple trap threads from being started when HP OV is installed.
-- SNMPExt project: SNMPInit.cpp, SNMPExt.cpp, SNMPTrap.cpp, SNMPQuery.cpp
DFCT43863 Marble Reporting a Failed Redundancy Message when creating Raid 10
--perc2pro.dll, perc2pro.nlm
DFCT49444 Retrofit fix from 3.1.3: Fix Add Member command to check for exceeding
2TB boundary
-- percext.dll
DFCT49950 Retrofit fix from 3.1.3: Fix Express mode create VD to handle case of
user selecting more than 2TB of disks for RAID-5 and RAID-50 (size of
Virtual Disk would have been less than 2TB).
-- Percpro.dll, percpro.nlm
DFCT51306 Fix drive mapping for SCSI provider when there are IDE drives in config
-- aspipro.dll
CHNG50447 Use a File of Adapter ID and Driver Matrix instead of Hard Coding. (PERCPRO)
-- amcheckreq.dll, amcommon.nlm, percpro.dll, percpro.nlm, lsiver.ini, adapver.ini
DFCT51220 Marble shut down automatically when create a second virtual disk with Ventura
-- percext.dll, percpro.dll, percpro.nlm
500.0
(no DFCT) include vendor.ini in netware install
-- modulesr.ini
DFCT50120 Strip size info. should be removed from Volume properties...
-- veritas build 3.2.500.0
DFCT50395 Volume Name couldn't have 32 characters in Extend Volume Wizard
-- veritas build 3.2.500.0
DFCT50239 Pull Down Menu "Help - About" includes wrong URL
-- veritas build 3.2.500.0
DFCT50628 Marble 3.2 forces you to use all available space on array before using new drive
-- percpro.dll, percpro.nlm, percext.dll
CHNG51103 change dedicated hot spare restrictions
-- percext.dll
CHNG51105 change global spare restrictions
-- percpro.dll, percpro.nlm, percext.dll
CHNG47912 Script for Cleaning Marble for Cloning
-- new folder cleanutil and file cln_bef.bat
CHNG29189 Final implementation of mixed mode clustering
-- percpro.dll, percext.dll
CHNG49958 Update global and dedicated hot spare logic to handle mixed mode clustering
-- percpro.dll, percext.dll
CHNG45907 Block deletion of shared Virtual Disk (actually in 499.1)
-- percpro.dll, percext.dll
DFCT46243 Upgrade install hits locked files
-- preinst.cpp, support.rul
DFCT49552 OMSA install NT 4.0
-- nt_tab.cpp
DFCT49824 File Locked errors during installation of marble
-- preinst.cpp, support.rul
DFCT50727 After installation of Marble, NW server should give a messg. to RESET server
-- aminst.cpp
CHNG31027 Updated serial number logic for ASPIpro. Shows correct serial number on hard
disk drives, DLT tape drives (not 8mm), and external enclosures.
-- aspipro.dll, aspiext.dll, aspipro.nlm
(no dfct) Fix cluster attribute on newly created dedicated VD.
-- percpro.dll
499.1
DFCT49647 After initialize disk or check consistency will disable options from the menu
-- percpro.nlm,percpro.dll,percext.dll
DFCT50276 error icon still there after online a disk from offline a disk in w2k
-- percpro.dll
CHNG50496 Do not install dellraid.mib to the MIB directory with the Marble installation
-- install modulesr.ini
DFCT50420 Microsoft issue: Can't reconfigure after split a RAID-10
-- perc2pro.dll, perc2pro.nlm
(no dfct) Repair install option warns about netware remote install
--setup.rul
DFCT50131 Locked File Detected error when re-install marble for node only in W2K
--support.rul
CHNG50309 Add PERC 4/QC to MArble 3.2
-- percpro.dll, percpro.nlm
DFCT50540 Errors unloading amcommon.nlm on uninstall/vxstop: amcommon was not waiting
for ASPIPro.nlm to exit before exiting.
-- amcommon.nlm
DFCT50541 Abends during uninstall (same root cause as DFCT50540)
-- amcommon.nlm
DFCT50602 Create VD disabled on W2k: Fix use of wrong constant for mixed-mode cluster + mixed-mode SCSI
-- percpro.dll
DFCT49464 error message during Marble uninstall using the IPS method in NW4
-- Aminst.cpp
DFCT49515 error message when you install marble 3.2 in Netware 6 using the IPS method
-- Aminst.cpp
(no dfct) Mixed mode cluster Phase 4 Implementation: Allow creation of dedicated VDs when there are no
cluster VDs. Change default modes on dedicated VDs. Disable creation of VDs (all kinds)
when there are cluster VDs. Block deletion of cluster VDs. Disable popup warning on
Create VD, because for dedicated VDs it does not matter.
-- percpro.dll, percext.dll
DFCT50482 Romb Ctlr does not show "Fan, Temperature Probe etc. won't shut down if get hot
-- aminst.cpp, uninstall.cpp
DFCT50030 Storage enclosure Info is not reported by disney on Netware 5.1
-- aminst.cpp, uninstall.cpp
DFCT49492 Uninstallation of Marble fails on NW6 A30.
-- uninstall.cpp
DFCT50099 installed marble 3.2 build on top on OMSA could cause marble installation hung
-- aminst.nlm, uninstall.cpp
499.0
Controller Firmware NT4Dr W2kDr NW4.2Dr NW5.1Dr NW6.1Dr .NetDr Beta Linux No Support
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06 6.01e
Perc2/SC (Quartz) on 8450 3.13 4.13 2.68 3.12 3.12 6.01j
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06 6.01e
Perc2/DC (Vail) x400+ Servers 1.06 4.13 2.68 3.12 3.12 6.01j
Perc3/DC(Taos)
Perc3/DCL(Taos Lite)
Perc3/QC(Aspen)
Perc3/SC(Virgo) 1.70 4.13 5.28 6.01j 6.01j 6.01j 6.22 1.18
CERC ATA100/4ch(Ventura) H661 4.13 5.28 NA 6.01j NA
Discovery ROMB TD11 T4.14 Build2 NA 6.01i 6.01j T6.23 1.18.5
Perc2 (Obsidian)
Perc3/Di (Jaguar Lexus,ROMB)
Perc3/Di (Dagger Boxster ROMB) 3153 4933 4933 NA 3546 3546
Perc2/Si (Iguana ROMB) 3552 4933 4933 NA 3546 3546
Perc3/Si (Slimfast ROMB)
Perc3/Di (Opal ROMB)
Perc3/Di (Viper ROMB) 3546 4933 4933 NA 3546 3546
U320 HBA Bios 5.00 10.00 1.04 1.04
megalib version 4.0.4.0 fixes:
DFCT49526 LSI controllers fail to assign hot spare
DFCT49359 Disk Drive capacity values displayed are double on SCSI chan in RAID/SCSI
DFCT48332 MegaLib support for U320 ROMB controller on Discovery
DFCT47755 Format VD on Adaptec controllers kills the disk mapping / disk object in Marble.
-- check in fixes in perc2pro.dll, but still waiting for info from adaptec
CHNG48893 Splash screen -- remove always on top attribute
-- veritas build 3.2.499.0
DFCT50010 Decimal point has to be eliminated from volume properties
-- veritas build 3.2.499.0
DFCT49996 Unit representative letters...GB or TB are missing beside disk capacity
-- veritas build 3.2.499.0
CHNG48156 Need Global hot spares back for PERC 2 controllers.
-- perc2pro.dll, perc2pro.nlm, perc2ext.dll
DFCT40181 Can dedicate hot spare drive to multiple RAIDs - status never changes
-- perc2pro.dll, perc2pro.nlm, perc2ext.dll
DFCT50084 Marble claims that report was generated while I/O was paused
-- perc2ext.dll
(No DFCT) Megasign support on W2K removed
-- PERC.rul
CHNG49035 Change version of Marble MIB to 2.2.
-- arymgr.bui, arymgr.mib, SNMPCommon.h(SNMPExt project), amMIBStructure.doc
CHNG27721 Need Scheduling capabilities in Marble for Disk Checks
-- amcli.dsw
DFCT49579 imcompleted sentence showed in NT4.0 Array Manager Utilities
-- servmgr.rc
498.0
CHNG31027 Show drive serial number on SCSI controllers
-- percpro.dll, percpro.nlm, percpro.ext, perc2pro.dll, perc2pro.nlm, perc2pro.ext
(no DFCT) add serial number for enclosures
-- percpro.dll, percpro.nlm, percpro.ext, perc2pro.dll, perc2pro.nlm, perc2pro.ext
DFCT49536 Fix problem with Aspen in Discovery (shows all channels as SCSI)
-- percpro.dll, percpro.nlm
Megalib NT/Windows Netware 4.02
FsaAPI & SDK: Netware 3546 Windows 3551
AFAMGT.SYS -- 2.7.3551
Controller Name Firmware NT4 Driver W2k Driver Netware4.2 Netware5.1/6.01a
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06
Perc2/SC (Quartz) on 8450 3.13 4.13 2.68 3.12 3.12
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06
Perc2/DC (Vail) x400+ Servers 1.06 4.13 2.68 3.12 3.12
Perc3/DC(Taos) 1.61N 4.13 5.28 3.12 3.12
Perc3/DCL(Taos Lite) 1.61N 4.13 5.28 3.12 3.12
Perc3/QC(Aspen) 1.61N 4.13 5.28 3.12 3.12
Perc3/SC() 1.63 4.13 5.28 3.12 3.12
CERC ATA100/4ch(Ventura) H661 4.13 5.28 No 6.01j(NW5.1 only)
Disovery ROMB TD07 T4.14 Build2 NA 6.01j
U320 HBA Bios 09.91 09.00 1.03.12 1.03.12 NA NA
Perc2 (Obsidian) 3153 4933 4933 No 3546
Perc3/Di (Jaguar Lexus,ROMB) 3153 4933 4933 No 3546
Perc3/Di (Dagger,BoxsterROMB) 3153 4933 4933 No 3546
Perc2/Si (Iguana ROMB) 3552 4933 4933 No 3546
Perc3/Si (Slimfast ROMB) 3546 4933 4933 No 3546
Perc3/Di (Opal ROMB) 3546 4933 4933 No 3546
Perc3/Di (Viper ROMB) 3546 4933 4933 No 3546
(no DFCT) Change copyright year from 2001 to 2002
-- vendor.ini
DFCT46604 Time to update the copyright year in splash screen, etc.
-- veritas build 3.2.498.0
DFCT49261 Server node in GUI doesn't show error
-- veritas build 3.2.498.0
DFCT48821 Duplicate CDROM names in Add Categories
-- veritas build 3.2.498.0
CHNG48984 Veritas needs to add drive mapping to ARRAY_DISK(102) objects
-- veritas build 3.2.498.0
DFCT49406 check button for remote install for netware still available
-- _isuser.rc
CHNG48068 Marble 3.2 needs to support new adapters (perc 4/SC, 4/DC, 4/IM)
-- percpro.dll, percpro.nlm
(no dfct) removed hard-coding of number of channels and replaced with call to GET_CHANNEL_NUMBER
-- percpro.dll, percpro.nlm
(no DFCT) Mixed mode clustering phase 3 implementation: Add Initiator ID and Mode to both channel and Enclosure
objects. Will obtain SCSI ID of cluster channels from Controller.
-- percpro.dll, percpro.nlm, percext.dll
(no DFCT) Renamed "Physical Disk" under SCSI channel of PERC 4/Di to "Hard Disk"--this is consistent with
OMSA. Also, change name of channel and enclosure objects from "(SCSI)" to "(SCSI Mode)" as per
Ahmad Ali recommendation. Will also display "Mode: SCSI" as part of mixed mode clustering phase 3.
-- percpro.dll, percpro.nlm
CHNG48744 Rename "Physical Disk" under SCSI provider to "Hard Disk", which is consistent with OMSA
terminology.
-- aspipro.dll, aspipro.nlm
DFCT46450 NW Local Install fails to install ASPI Provider
-- vxreg.dat
497.0
DFCT46511 Most files in Provider Status have the wrong version
-- veritas build 3.2.497.0
(no DFCT) 64-bit snmp extension registry key change in install
-- snmp.rul
DFCT48598 Marble 3.2 install needs to be able to detect PERC 4/DI in Discovery (PE2600)
-- dialog.rul
DFCT43615 Very slow response and console freez when deleting a catagory
-- veritas build 3.2.497.0
DFCT47503 Delete category refresh is very, very slow
-- veritas build 3.2.497.0
DFCT49011 AM version in ITA is displayed wrong.
-- snmptable.cpp
CHNG48242 Add new property to the EMM Table in the Marble MIB for Maximum Speed.
-- SNMPCommon.h, arymgr.bui, arymgr.mib
DFCT48773 Rescan cdrom capacity when status changes (drive eject, drive load)
-- aspipro.dll, aspipro.nlm (Veritas console out of sync: see 49027)
DFCT48739 Output Ultra 320 as speed of 22320 controller
-- aspipro.dll, aspipro.nlm
DFCT48694 Fix View Report for SCSI provider for new GUI layout
-- aspiext.dll
(no DFCT) Discovery support: Change name of disks on SCSI channel of PERC 4/Di
-- percpro.dll, percpro.nlm
(no DFCT) Discovery support: Change right click menu for disk on SCSI channel of PERC 4/Di
-- percpro.dll, percpro.nlm
(n/a) Known defects on Discovery: drive mapping does not work on SCSI channel of PERC 4/Di
when in RAID/SCSI mode. Tape and CDrom drives may not appear under Marble.
496.2
CHNG32098 Need SNMP support on Win64
-- New projects: SNMPPro, SNMPExt64
CHNG46704 Do not display Mylex pseudo disks in the SNMP Disk Table - or process them.
-- SNMPCommon.h, SNMPQuery.cpp
CHNG47733 List CD-ROM in the MIB Disk Table
-- arymgr.bui, arymgr.mib, SNMPCommon.h, SNMPQuery.cpp
DFCT47476 sometimes Operation Failed when unmirror for the Concatenation of Raid-1
-- perc2pro.nlm
DFCT47226 View Report for Ventura doesn't list all the array disks in NW6
-- percext.dll
CHNG47441 Need item in Array Manager utilities for enable/disable SCSI provider
-- nt_tab.h, nt_tab.cpp, nw_tab.h, nw_tab.cpp, resource.hm, servmgr.rc, servmgrdlg.cpp, servmgrdlg.h
(no DFCT) added Discovery RAID/SCSI detection on PERC 4/DI
-- percpro.dll
(no DFCT) added mixed mode clustering detection on PERC 3/DC
-- percpro.dll
(no DFCT) 64-bit snmp support in install
-- setup.rul, support.rul, snmp.rul and make64snmp.bat
496.1
DFCT47456 AmCheckReq crashes when attempting to install on .NET-32
-- amcheckreq.cpp
496.0
(no DFCT) added Discovery RAID (PERC 4/DI) identification
-- percpro.dll & nlm
DFCT46567 On Deleting Virtual Drive, some drives still shows ONLINE
-- percpro.dll & nlm
MEGALIB 4.0.2.0 for windows
CHNG28689 MICROSOFT ISSUE: Auto-blink for selecting disks for create VD (LSI)
CHNG28690 MICROSOFT ISSUE: Auto-blink for selecting disks for create VD (Adaptec)
-- percext.dll, perc2ext.dll
CHNG31853 Dell utility partition can be deleted from volume tab...it shouldn't be
-- vxreg.rul
DFCT46604 Time to update the copyright year in splash screen, etc.
-- veritas build
CHNG46323 Test for TCP/IP networking on Marble installation to avoid crash in NT4.0
-- veritas build
DFCT46168 Marble crashes in NT4.0 sp6a IE5.5 with Dr. Watson error
-- veritas build
495.0
CHNG47133 Add PERC 3/DC Plus and PERC 3/QC Plus subsystem ids to Marble 3.1.3
-- percpro.dll & nlm
DFCT44644 Consistency missing for the button View Configuration when compared other btns
-- new veritas build 3.2.495.0
DFCT46505 EMM is not in the Add Categories list
-- new veritas build 3.2.495.0
DFCT46507 The Server Version in Provider Status should be 3.2 instead of 3.1.2
-- new veritas build 3.2.495.0
DFCT34029 Mouse cursor issues on marble
-- new veritas build 3.2.495.0
CHNG45864 Need more object properties on enclosure and channel objects in Right pane
-- new veritas build 3.2.495.0
CHNG46253 Smart Alert with Severity Warning Icon
-- new veritas build 3.2.495.0
MEGALIB 4.0.1.0 for windows
DFCT46500 Dr. Watson generates an error message when adding a label to a volume.
-- fsys4.dll
DFCT46506 Unable to create a disk volume using Marble under NT 4.0.
-- fsys4.dll
DFCT46794 Change the Warning Temperature Error Message
-- percmsg.dll, per2msg.dll
CHNG44925 Thermal Shutdown with Zappa enclosure for Marble 3.2 (ami only)
--percpro.dll, percpro.nlm
494.1
CHNG29190 Random LUN deletion for AMI controllers (still need NW megalib!!)
-- percpro.dll, percext.dll, percpro.nlm
DFCT22132 Visual appearance of SMART alerts
-- aspipro.dll, aspiext.dll, aspipro.nlm, percpro.dll, percext.dll, percpro.nlm,
perc2pro.dll, perc2ext.dll, perc2pro.nlm
DFCT43564 Help button on firmware download dialog
aspiext.dll, percext.dll perc2ext.dll
(no defect) Aspipro implementation of enhanced GUI Phase 1
aspipro.dll, aspipro.nlm
(no defect) Implementation of 22320 in NetWare version of SCSI provider. Note: There is
no 22320 driver for NetWare posted on I-drive, this version is for LSI to
internally test only.
aspipro.nlm
DFCT46409 Bug in MIB Documentation
-- arymgr.mib, arymgr.bui, amMIBStructure.doc
CHNG45976 Detail MIB additions for the 3.1 release in the MIB Structure document
CHNG45977 Cleanup formattion of the pdf format of the MIB Structure document
-- amMIBStructure.doc
CHNG23912 Need a way to disable error pop-up window in Marble
-- nt_tab.h, nt_tab.cpp, servmgrdlg.cpp, servmgrdlg.h, support.rul
CHNG46457 Enhanced GUI Phase 1 (dup)
CHNG30112 object hierarchy improvement
-- percpro.dll, percpro.nlm, perc2pro.dll, perc2pro.nlm, percext.dll, perc2ext.dll
494.0
Megalib NT/Windows 4.0.0 : Netware/Megalib 4.0.0
FsaAPI & SDK: Netware 3546 Windows 3551
AFAMGT.SYS -- 2.7.3551
Controller Name Firmware NT4 Driver W2k Driver Netware4.2 Netware5.1/6.01a
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06
Perc2/SC (Quartz) on 8450 3.13 4.11.2 2.68 3.12 3.12
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06
Perc2/DC (Vail) x400+ Servers 1.06 4.11.2 2.68 3.12 3.12
Perc3/DC(Taos) 1.61N 4.11.2 5.22.2 3.12 3.12
Perc3/DCL(Taos Lite) 1.61N 4.11.2 5.22.2 3.12 3.12
Perc3/QC(Aspen) 1.61N 4.11.2 5.22.2 3.12 3.12
Perc3/SC() 1.63 4.11.2 5.22.2 3.12 3.12
CERC ATA100/4ch(Ventura) H661 4.13(DSA) 5.26 NA 6.01h
Perc2 (Obsidian) 3153 4933 4933 No 3546
Perc3/Di (Jaguar Lexus,ROMB) 3153 4933 4933 No 3546
Perc3/Di (Dagger,BoxsterROMB) 3153 4933 4933 No 3546
Perc2/Si (Iguana ROMB) 3552 4933 4933 No 3546
Perc3/Si (Slimfast ROMB) 3546 4933 4933 No 3546
Perc3/Di (Opal ROMB) 3546 4933 4933 No 3546
Perc3/Di (Viper ROMB) 3546 4933 4933 No 3546
DFCT 33783: SCSI Provider for non-RAID (also known as Direct Attach)
- aspipro.dll, aspimsg.dll, aspiext.dll aspipro.nlm
(no defect) Implementation of 22320 controller in Windows version of SCSI provider
- aspipro.dll
DFCT 44536: Drive size is different on same drive
- amconsole.exe vxsvc
DFCT 45754: Comma should be taken out, send should be 'type' in Add Categories window
- amconsole.exe vxsvc
DFCT 45409: Cannot retrieve global system status on Netware
- amconsole.exe vxsvc
CHNG44981 Marble should be able to report speed capability of ZEMM module (U160 or U320)
-- percpro.dll, percpro.nlm, perc2pro.dll, perc2pro.nlm, percext.dll, perc2ext.dll
493.3
CHNG38807 Remove RAID Policy
-- percext.dll, perc2ext.dll
DFCT393513 Marble Modify Installation Does Not Turn PV660 Management Off
-- Mylex.rul
493.2
DFCT45315 a word is missing in Marble installation window in Japanese W2K
-- isuser.dll
493.1
DFCT45591 - Full install of Marble missing arraymanager.exe file in Windows NT4
- documentation change, updated readme.txt
CHNG43831 Change MIB Structure Document from HTML to PDF.
-- amMIBStructure.pdf
DFCT43832 Create a new document to track MIB changes from release to release.
-- amMIBStructure.html Added a section for Change History
DFCT45450 Marble crashes when creating VD on AMI with PV660 and SAN sftware installed
-- New megalib.dll ver 3.4.11.0
DFCT44884 VXSVC.exe is crashing after a system rescan followed by an AMI controller rescan
-- New megalib.dll ver 3.4.11.0
493.0
DFCT45443 Marble SNMP provider shows different global statuses in different tables.
-- SNMPQuery.cpp
DFCT44441 NW 4.2 system abend caused by vxsvc.nlm
-- veritas build 3.1.493.0
DFCT37177 Marble loads NLMs that are not needed for Netware 660F monitoring
-- veritas build 3.1.493.0
DFCT44595 Add to favourite and next time connection option only work once
-- veritas build 3.1.493.0
(no defect) CLI initializeVxVm only returns success when all provider initialization are done
-- veritas build 3.1.493.0
(no defect) Fresh install of W2K node does not show error message during Autry dependency check
DFCT45380 Driver 2.32 shows "pass" during installation of NT4 on a x400 server
- install dialog.rul and amutils versiontab.cpp
DFCT45438 Change severity of Mylex event 859 from WARNING to INFORMATIONAL.
-- arymgr.bui, arymgr.mib, arymgr.cfg
DFCT45077 When logged in without admin rights Veritas splash screen appears
-- install dialog.rul
DFCT43813 Windows NT4 fail the uninstallation
-- install setup.rul & dialog.rul
DFCT43396 Array Mgr will not install on NT 4.0 w/ ROMB
-- no changes made for this build, but no longer a problem
DFCT45191 Array Manager not updating ominstal.db file in 312 (NETWARE)
-- Aminst.C & uninstall.cpp
DFCT45337 PV660 management on Netware should be disabled by default
-- Vxreg.dat
Megalib: Netware/Megalib 3.4.10
FsaAPI & SDK: Netware 3546 Windows 3551
AFAMGT.SYS -- 2.7.3551
Controller Name Firmware NT4 Driver W2k Driver Netware 4.2 Netware 5.1 & 6.01a
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06
Perc2/SC (Quartz) on 8450 3.13 4.11 2.68 3.11a 3.11a
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06
Perc2/DC (Vail) x400+ Servers 1.06 4.11 2.68 3.11a 3.11a
Perc3/DC(Taos) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/DCL(Taos Lite) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/QC(Aspen) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/SC() 1.63 4.11 5.22.1 3.11a 3.11a
Perc2 (Obsidian) 3153 4933 4933 No 3546
Perc3/Di (Jaguar Lexus,ROMB) 3153 4933 4933 No 3546
Perc3/Di (Dagger,BoxsterROMB) 3153 4933 4933 No 3546
Perc2/Si (Iguana ROMB) 3546 4933 4933 No 3546
Perc3/Si (Slimfast ROMB) 3546 4933 4933 No 3546
Perc3/Di (Opal ROMB) 3546 4933 4933 No 3546
Perc3/Di (Viper OMB) 3546 4933 4933 No 3546
CERC ATA100/4ch(Ventura) G661 4.13(DSA) 5.26 NA 6.01g
DFCT41891 Array Manager causes IT Assistant to show incorrect system status.
SNMPPro.nlm
DFCT44502 Server Busy error with DSA blocks OS installation on a diamond
-- Percpro.dll
DFCT44719 CERC ATA controller is identified wrong in Marble MIB Controller Table
-- This was returned and had to be fixed again. SNMPQuery.cpp
DFCT45025 Cannot install marble on windows xp
-- Dialog.rul
DFCT45275 should not have MMC snap in link on managed node only install
-- install default.shl
(no DFCT) updated adaptec api to 2.7.3551
CHNG45244 Add a section in the Marble MIB document for known issues - 591-598 enclosure trap issue.
-- amMIBStructure.html
492.1
DFCT42462 Alarms inconsistent between Windows & NetWare: turn off alarm when rebuild starts
-- percpro.nlm
DFCT43464 No battery but all features show up
-- perc2pro.dll, perc2pro.nlm
DFCT43574 No consistency in messages displayed
-- percext.dll
DFCT43990 Marble doesn't upgrade Zappa both EMMs firmware.
-- percpro.dll & nlm, perc2pro.dll & nlm
DFCT44080 Upgrade from Marble 3.1 to 3.1.1 on W2K Server
-- install dialog.rul
DFCT44657 Marble error when connecting to a node install that was upgraded from Autry 1.2
-- install support.rul
DFCT44660 Create VD does not check for pre-existing dedicated hot spare and allows additional
ones to be created. Also documented with 45049, 45020, 45022, 45026.
Also, prevent more than one disk from being selected in list box (GUI).
-- percpro.dll, percpro.nlm, percpro.ext
DFCT44738 ITAssistant is not receiving right SNMP trap about hot spare on AMI controllers.
-- arymgr.cfg
DFCT44719 CERC ATA controller is identified wrong in Marble MIB Controller Table
DFCT44720 In the Marble MIB, the Product ID in the Array Disk Table is null for SCSI ATs
-- fixed both at once. SNMPQuery.cpp, SNMPCommon.h, arymgr.mib
DFCT44996 Assign hot spare in Adaptec controller do not generate SNMP message.
-- perc2msg.dll, perc2pro.dll, perc2pro.nlm
DFCT44851 Full install of Marble missing arraymanager.exe file in Windows NT4.
492.0
CHNG44541 Add SNMP trap for new enclosure event #600.
-- arymgr.mib, arymgr.cfg, arymgr.bui, SNMPInit.h, SNMPInit.cpp, SNMPTrap.cpp
DFCT42862 Marble VXSVC appears to interfere with normal Netware shutdown, causing a hang
-- new veritas build
DFCT42143 Health status not changing for Fan warnings and failures on a hendrix in OMSA
-- hendrix hardware error
-- workaround in percpro.dll, percpro.nlm, perc2pro.dll, perc2pro.nlm
CHNG43688 Typing error. word VERITY should be VERIFY in Array Manager warning window
-- percext.dll
DFCT42563 VXsvc.exe and amconsole.exe are crashing
-- megalib 3.4.10.0
DFCT44226 Initializing 2nd VD destroyed OS in first VD 4400 ROMB, NW5.1
-- changed error message slightly in per2ext.dll
DFCT44396 Megalib broadcasting debug commands on console in nw5.1
-- percpro.nlm
DFCT44441 NW 4.2 system abend caused by vxsvc.nlm
-- percpro.dll, percpro.nlm
DFCT43419 Only one option should be available "Blink or Unblink"
-- always will have both options now
-- perc2pro.dll
no defect CERC ATA100/4ch support in install and amutils
-- firmware/driver: G661/5.26
491.0
ADD to Driver Checklist
Controller Name Firmware NT4 Driver W2K Driver Netware 4.2 Netware 5.1& 6.01x
CERC ATA100/4CH G661 NO 5.26 NO 6.01g
DFCT43410: Folder icon does not change its state from close to open
-- new veritas build
DFCT32693: Error message when i ran the "Repair Raid-5 Volume' wizard
-- new veritas build
DFCT42997 Disk Capacity not showing correctly in Properties dialog.
-- percext.dll, perc2ext.dll
CHNG43688 Typing error. word VERITY should be VERIFY in Array Manager warning window
-- perc2ext.dll
DFCT43968 CERC - need 'blink/unblink' greyed out in menu.
-- percpro.dll & nlm
DFCT43953 Alarm options are showing wrongly.
-- percpro.dll & nlm
CHNG38807 Remove Raid Policy
-- percext.dll, perc2ext.dll
DFCT42529 Ventura: "Failed to remove array disk message"
-- percpro.dll & nlm
no defect CERC ATA100/4ch support in install and amutils
-- firmware/driver: F661/5.26
DFCT44129 Zappa Firmware Download fails
-- percpro.dll & nlm, perc2pro.dll & nlm
DFCT42421 Properties page for enclosure does not show updated firmware version
-- New provider from mylex
DFCT43736 Marble 3.1.2.489.2 Does not start or take 30min to start
-- New provider from mylex
DFCT43505 Received Dr. Watson error VxSrv.exe unpon reboot of NT host
-- New provider from mylex
490.0
Driver Checklist
Controller Name Firmware NT4 Driver W2k Driver Netware 4.2 Netware 5.1 & 6.01a
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06
Perc2/SC (Quartz) on 8450 3.13 4.11 2.68 3.11a 3.11a
Perc2/DC (Vail) x300 Servers 1.06 2.32 2.68 2.06 2.06
Perc2/DC (Vail) x400+ Servers 1.06 4.11 2.68 3.11a 3.11a
Perc3/DC(Taos) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/DCL(Taos Lite ) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/QC(Aspen) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/SC() 1.63 4.11 5.22.1 3.11a 3.11a
Perc2 (Obsidian) 3153 4933 4933 No 3546
Perc3/Di (Jaguar Lexus,ROMB) 3153 4933 4933 No 3546
Perc3/Di (Dagger,BoxsterROMB) 3153 4933 4933 No 3546
Perc2/Si (Iguana ROMB) 3546 4933 4933 No 3546
Perc3/Si (Slimfast ROMB) 3546 4933 4933 No 3546
Perc3/Di (Opal ROMB) 3546 4933 4933 No 3546
Perc3/Di (Viper OMB) 3546 4933 4933 No 3546
no defect - Changed version checking for perc3/di firmware in install. Only major version of
firmware will be shown
dialog.rul, amcheckreq.cpp
DFCT41459 new megalib build 3.4.9.0
CHNG35301 Should we remove the 'preferred Plex' from the menu if they are not functional ?
new build from Veritas
DFCT37818 and DFCT29627 AM start screen for virtual disk creation
489.2
Driver Checklist
Controller Name Firmware NT4 Driver W2k Driver Netware 4.2 Netware 5.1 & 6.01a
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06
Perc2/SC (Quartz) on 8450 3.13 4.11 2.68 3.11a 3.11a
Perc2/DC (Vail) x300 Servers 1.06 4.11 2.68 3.11a 3.11a
Perc2/DC (Vail) x400+ Servers 1.06 4.11 2.68 3.11a 3.11a
Perc3/DC(Taos) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/DCL(Taos Lite ) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/QC(Aspen) 1.61J 4.11 5.22.1 3.11a 3.11a
Perc3/SC() 1.63 4.11 5.22.1 3.11a 3.11a
Perc2 (Obsidian) 3151 4933 4933 No 3542
Perc3/Di (Jaguar Lexus,ROMB) 3151 4933 4933 No 3542
Perc3/Di (Dagger,BoxsterROMB) 3151 4933 4933 No 3542
Perc2/Si (Iguana ROMB) 3542 4933 4933 No 3542
Perc3/Si (Slimfast ROMB) 3542 4933 4933 No 3542
Perc3/Di (Opal ROMB) 3542 4933 4933 No 3542
Perc3/Di (Viper OMB) 3542 4933 4933 No 3542
DFCT41615 no name is shown in Computer Manangement if Node only is installed
-- modulesR.ini
DFCT40066 Marble uninstall leaves files and dir's behind
489.1
DFCT41611 Events show slot number, but not enclosure number.
-- New provider from mylex
DFCT37828 35237 | Controller Reset
-- New provider from mylex
DFCT40929 PV660F power supplies have a revision of "None".
-- New provider from mylex
DFCT39714 Array manager sharing same disk ID across multiple disks
-- New provider from mylex
DFCT41541 After Add VD, can't delete any VDs
-- New provider from mylex
DFCT41951 Enclosure properties only shows first 24 chars of asset name
-- New provider from mylex
DFCT42426 controller f/w download with partner controller disabled makes 660f
-- New provider from mylex
DFCT41014 Marble causes server halt / abend on NetWare 4.2 if storage is rebooted
-- New provider from mylex
CHNG42600 Change Request - Virtual disk naming
-- New provider from mylex
489.0
(no DFCT?) not calling smdetach if disney shutdown fails
-- percpro.dll, perc2pro.dll, amcommon.nlm
DFCT42028 Ventura testing: IDE logical array as SCSI
-- made dell fixes only (not veritas) -- percpro.dll & nlm & percext.dll
(no DFCT) perc2pro blink fix (VD and AD)
-- perc2pro.dll and .nlm
DFCT37679 arymgr.mib will not compile for use with Compaq Insight Mgr 2.0
-- arymgr.bui, arymgr.mib
DFCT33950 Marble 3.0: MMC Snap in has no label
-- MMC.rul
DFCT42263 Marble defaults to write back cache on PERC 3/SC
-- percext.dll
DFCT42283 wrong information for Dagger Romb firmware in Array Manager Utilities
-- versiontab.cpp, servmgr.rc
DFCT42303: AMInstall and Service utility have different version checking standard
DFCT41584: The version should be changed to 3.1.2 in provider status
-- New veritas build
DFCT37177 Marble loads NLMs tht are not needed for Netware 660F monitoring
-- new veritas build
CHNG38417 Marble console should have properties page command for server
-- new veritas build
488.1
DFCT42775- Ambigous error message pops up when enabling PV660f
488.0
DFCT41775 incorrect message in Event View when temperature probe is over heat
-- perc & perc2 dll's and nlm's & percmsg & perc2msg
DFCT41584 the version should be changed to 3.1.2 in Provider Status
-- perc & perc2 dll's and nlm's
CHNG39288 Need consistency in severity levels of arymgr.mib.
-- arymgr.bui, arymgr.mib
DFCT39286 Severity level masmatches between arymgr.mib and arymgr.cfg.
-- arymgr.bui, arymgr.mib, arymgr.cfg
DFCT 29627:AM start screen for virtual disk creation
-- vxsvc and amconsole
Driver Checklist
Controller Name Firmware NT4 Driver W2k Driver Netware 4.2 Netware 5.1
Perc2/SC (Quartz) 3.13 2.32 2.68 2.06 2.06
Perc2/SC (Quartz) on 8450 3.13 4.11 2.68 3.11a 3.11a
Perc2/DC (Vail) x300 Servers 1.04 4.11 2.68 3.11a 3.11a
Perc2/DC (Vail) x400+ Servers 1.04 4.11 2.68 3.11a 3.11a
Perc3/DC(Taos) 1.61J 4.11 5.22 3.11a 3.11a
Perc3/DCL(Taos Lite) 1.61J 4.11 5.22 3.11a 3.11a
Perc3/QC(Aspen) 1.61J 4.11 5.22 3.11a 3.11a
Perc3/SC() 1.63 4.11 5.22.1 3.11a 3.11a
Perc2 (Obsidian) 3151 4933 4933 3499 3542
Perc2/Si (Iguana ROMB) 3542 4933 4933 3499 3542
Perc3/Si (Slimfast ROMB) 3542 4933 4933 3499 3542
Perc3/Di (Opal ROMB) 3542 4933 4933 3499 3542
Perc3/Di (Viper OMB) 3542 4933 4933 3499 3542
Perc3/Di (Jaguar, Lexus, ROMB) 3151 4933 4933 3499 3542
Perc3/Di (Dagger, Boxster ROMB) 3151 4892 4933 XXXX 3542
DFCT41102 : Set default for Hide Unknown Disks to enabled
DFCT41106 : Quick Access Window starts up as default: Rejected
DFCT40526 : Need to update dialog box for Fibre-related questions during install
DFCT40999 : Need EditQueueLimit DWORD in registry
DFCT41506 : WW1.2 Marble 3.1.1 Build 482.4 does not able to change controller Queue Limit
DFCT39351 : Marble Modify Installation Does Not Turn PV660 Management Off
DFCT37484 : AM Utilities doesn't work for NW 5.1: Rejected
DFCT41949 Netware 5.1 abend during the Raid-1 virtual disk creation using the Romb
-- Perc2Pro.nlm, Perc2Pro.dll
DFCT41776 wrong Spare Array Disk information displayed in Array Disk Properties under Romb
-- Perc2ext.dll
DFCT39646 Events 885, 886, and 889 need to be marked "obsolete" in MIB and removed from arymgr.cfg. Also, event 838.
-- SNMPTrap.cpp, arymgr.mib, arymgr.cfg, arymgr.bui
NO DFCT Updated MIB Structure document to include the EMM stuff. KEMR
DFCT29110 The hot keys didn't work after select the Remote Server in AM Service Manager
-- NT_Tab.cpp, NW_Tab.cpp, ServMgrDlg.cpp, resource.h
DFCT41856 :AM Utilities has the wrong Romb firmware information for Dagger
-- versiontab.cpp, amcheckreq.h and amcheckreq.cpp
487.0
DFCT41068: On startup Marble does not have severity property for the system group in DB
-- vxsvc and amconsole
DFCT37885: 26029 | Marble (426): Grammer error on "Upgrade Disks" dialog box
-- vxsvc and amconsole
DFCT40458: Should we use Target or Target ID in marble General tab & Array Disk Properties?
-- vxsvc and amconsole
DFCT33024: Should CD Rom be 2 words instead of one word in properties ?
-- vxsvc and amconsole
DFCT39669: Reset Config option needs to be grayed out during an initialization
-- New provider from mylex
DFCT41454: Failed Enclosure shows up in marble without alert icon
-- New provider from mylex
DFCT40608: "Controller entered normal cache mode" has wrong event level
-- New provider from mylex
DFCT41458: netware 42 will not load pv660f.nlm
-- New provider from mylex
DFCT41008: Marble Utilities has memory leaks
-- ServMgr.rc, ServMgr.cpp, ServMgrDlg.cpp, NT_Tab.cpp
CHNG39732 AMUtilities should show the failed statments in the window in the future
-- ServMgr.rc, ServMgr.aps, VersionTab.cpp, VersionTab.h and resource.h
DFCT41362 Hendrix has some issues with the new Enclosure Management Module properties
-- percpro.dll, percpro.nlm, perc2pro.dll, perc2pro.nlm
CHNG41552 need to recognize AMI IDE RAID controller by name
-- percpro.dll, percpro.nlm
DFCT41274 Marble 3.1 displays a ROMB 2.6 battery present when there is no battery
-- per2pro.dll, per2pro.nlm, perc2ext.dll
DFCT40152--The build version is incorrect in the About box for Marble 3.1.2
486.3
CHNG41009 Add SNMP support for enclosure EMM objects
-- SNMPCommon.h, SNMPQuery.cpp (windows)
DFCT40685 Marble events in log do not sync with arrays scanned after a reboot
-- New provider from mylex
DFCT40855 PV660F enable/disable enclosure alarm option is greyed out after any rescan.
-- New provider from mylex
DFCT40500 Marble 3.1.484.2. stop responding and system Hung
-- New megalib.dll from LSI
DFCT40057 Drive mapping is not working on a machine with AMI and Adaptec controllers
-- New megalib.dll from LSI
DFCT41186 Virtual disk missing if Hide Unknown Windows Disks at Startup has checked
-- Percpro.dll percext.dll
DFCT40180 VD rebuild status not properly reported
-- Perc2pro.nlm, perc2pro.dll
486.0
CHNG39502 Please add an icon to show ZEMM's error on Marble as well as in the event log.
-- percpro.dll & nlm, per2pro.dll & nlm, perc and perc2 ext.dll
DFCT40430 enclosure name won't fit in Properties screen if all characters are capitalized
-- percext & perc2ext
DFCT40644 Temperature probe info. in Hendrix initially set to 55 until we reset it.
-- percext & perc2ext
CHNG41003 Provide SNMP support for Mylex OD Disk to Virtual Disk correlation
-- SNNPQuery.cpp
-- SNMPCommon.h (maybe, but I checked it in just in case)
DFCT40398 removing Marble makes Backup Exec useless.
-- vxsvc and amconsole
DFCT39683 Marble loads NLMs that are not needed for NetWare 660F monitoring .
-- vxsvc and amconsole
DFCT40603 Error message and can't launch the Help from NT to W2K connected remotely.
-- vxsvc and amconsole
DFCT40641 "View hardware configuration"does not show all the information about controller.
-- vxsvc and amconsole
DFCT36785 Extended partition issues on Marble.
-- vxsvc and amconsole
DFCT38184 Cosmetic error on Create Volume Wizard.
-- vxsvc and amconsole
CHNG40418 Add EMM Object Type.
-- vxsvc and amconsole
CHNG40419 A warning smart alert Icon.
-- vxsvc and amconsole
DFCT39676 Array Manager reports the ROMB battery is ok when the battery is not installed
-- Perc2Ext.dll
DFCT40820 Amafa.nlm couldn't be loaded in Netware 4.2
-- Fixed perc2pro release makefile to include load dependency on amafa.nlm.
DFCT40478 messy db file entry
-- AMcheckreq.cpp
485.0
DFCT40096 Marble console crashes (dr watson) with exactly 3 IP addresses w2k SP1
-- vxsvc and amconsole
DFCT40724 SNMP gives Dr. Watson errors on NT4
-- SNMP Query.cpp 3.1.1 Only
484.4
DFCT40316 NW42 server with Obsidians and Marble 3.1 ABEDNS after drive pulls
-- NEW deliverable amafa.nlm which contains the adaptec fsaapi_lib.lib compiled with code warrior
DFCT40554 Marble SNMP Extension agent sends an error each time the SNMP table is built.
-- SNMPQuery.cpp
DFCT40494 Zappa zemm failure is not reported properly in Netware
-- perc2pro.nlm (amevent.cpp)
484.3
DFCT40462 Dependency Program of ArrayManager blocks the ManageNode installtion(Autry)
-- amcheckreq.dll
DFCT40425 Marble will not install if FAST app is installed by the Dell App CD.
-- install string table; amutils.exe (string), readme.txt
484.2
(no DFCT??) -- snmpext.dll changes
484.1
(no DFCT) not reading any tag data on hendrix on netware (Adaptec)
-- perc2pro.nlm (aminit.cpp)
484.0
(no DFCT) not reading or writing any tag data on hendrix on windows (Adaptec)
-- perc2pro.dll (aminit.cpp, amenclos.cpp)
DFCT40148 Dr. Watson SNMP error message appears at random.
-- SNMPQuery.cpp 3.1 Only
DFCT40028 Abend relating to vxsvc.nlm and vxnwlib.nlm in NW 4.2
-- veritas fix
DFCT37347 Server node always has good status
-- veritas fix
DFCT38221 error message when utilize Reactivate Disk function in W2K with Zappa
-- veritas fix
DFCT39397 Driver Firmware checking incorrect
-- install - dialog.rul
DFCT40091 Zappa Temperature probe reaches Thermal Shutdown level and Server doesn't reboot
-- Fixed in percpro.dll, percpro.nlm. perc2pro.nlm, perc2pro.dll
(no DFCT) fixed isolated memory leaks AMI and adaptec
-- percpro.dll, percpro.nlm. perc2pro.nlm, perc2pro.dll
(no DFCT) update temp probe current value and fan speed during poll in AMI
-- percpro.dll & nlm
CHNG40072 Battery properties message should be more meaning ful
-- perc2ext.rc
DFCT40133 Enclosure remains in failes state even if no config. (Adaptec and AMI)
-- percpro.dll, percpro.nlm. perc2pro.nlm, perc2pro.dll
482.4
DFCT40039 Zappa does not report 2nd secondary ZEMM's failure to Marble (AMI and Adaptec)
(no DFCT) c:\jclog.txt debug file was still there -- we removed it
DFCT39937 Zappa does not report 2nd secondary ZEMM's failure to Marble (ADAPTEC)
-- Flaw design in Enclosure
DFCT39788 Drive mapping is not working on a machine with AMI and Adaptec controllers
-- Workaround is to Lock VD operations until you reboot. Percpro.dll
DFCT39860 SNMP Dr. Watson error message appears after creating virtual disk & reboot system
-- SNMPInit.cpp KEMR
DFCT39174 Miscalculating Drive Size after new disk initialization on Adaptec
-- perc2msg.mc
DFCT39775 Hot Spare cannot be configured when array disk is part of 2 or more VirtualDisks
-- objvirtualdisk.cpp
482.1
update version checking for install, amutils, autry to correspond to:
Firmware NW4.2DD NW5.XDD NTDD W2KDD
PERC 3/SC 1.62 3.11a 3.11a 4.11 5.23
PERC 3/DC 161j 3.11a 3.11a 4.11 5.22
PERC 3/QC 161j 3.11a 3.11a 4.11 5.22
PERC 2/DC 1.04 3.11a 3.11a 4.11 2.68
PERC 2/SC* 3.13 3.11a 3.11a 4.11 2.68 * - On diamond only
Obsdian Perc 2-QC b3116 b3499 b3506 b4892 b4892
JaguarROMB PE4500 b3116 b3499 b3506 b4892 b4892
LexusROMB PE2500 b3116 b3499 b3506 b4892 b4892
IguanaROMB PE2400 b3506 b3499 b3506 b4892 b4892
SlimfastROMB PE2450 b3506 b3499 b3506 b4892 b4892
OpalROMB PE4400 b3506 b3499 b3506 b4892 b4892
ViperROMB PE2550 b3506 b3499 b3506 b4892 b4892
DFCT38470 strange data in "service tag" field (AMI & adaptec)
-- more changes to amenclos.cpp
DFCT39579 Array Manager webpack does not download and install.
--ammain.htm
DFCT39596 Change agentSystemGlobalStatus in Marble MIB to represent the "real" global status.
-- Files changed: SNMPQuery.cpp ** 3.1.1 KEMR
DFCT39128 Local NetWare installation of Marble need to check the correct path for Disney
-- aminst.C and amuninst.cpp
DFCT39541 Array Manager Utilities reports Disney as "Not installed"
-- amutils.exe, amcheckreq.dll
(no DFCT) added OMSA checking for autry
-- amcheckreq.dll
(no DFCT) updated paths for shortcuts in webpack install
-- default.shl
482.0
Firmware NetwareDD NTDD W2KDD
PERC 3/SC 1.62 3.11a 4.11 5.23
PERC 3/DC 161h 3.11a 4.11 5.22
PERC 3/QC 161h 3.11a 4.11 5.22
PERC 2/DC 1.04 3.11a 4.11 2.68
PERC 2/SC* 3.13 3.11a 4.11 2.68 * - On diamond only
Obsdian Perc 2-QC b3113 b3503 b4892 b4892
JaguarROMB PE4500 b3113 b3503 b4892 b4892
LexusROMB PE2500 b3113 b3503 b4892 b4892
IguanaROMB PE2400 b3502 b3503 b4892 b4892
SlimfastROMB PE2450 b3502 b3503 b4892 b4892
OpalROMB PE4400 b3502 b3503 b4892 b4892
ViperROMB PE2550 b3502 b3503 b4892 b4892
DFCT39554 Array Manager Utilites warns wrong FW for ROMB in Lexus...W2K
-- versions.cpp
DFCT34034 3 improper information for Provider Status in W2K
-- Fixed in amconsole.exe vxsvc.exe
DFCT37838 nw42 server abneds intermittently while tryin to connect via arraymgr
Veritas fix in the UCL transport layer
-- Fixed in amconsole.exe vxsvc.exe
DFCT38176 RAID 10 and RAID 50 configuration break with Marble 3.1.475.5 build.
New error msg added to percext.dll
DFCT38241 Blinking option has ~6 seconds delay
New Megalib.dll, megalib.nlm
DFCT38286 Marble console does not recoganize hot swapping the HD
Fixed open channel case in percpro.dll and percpro.nlm.
DFCT39128 Local NetWare installation of Marble need to check the correct path for Disney
-- AMInst.c
DFCT39172 Disable Alarm option is always greyed out...PE2400...NW5.1..Adaptec controller
-- ammenu.h
DFCT33260 console only install generates client extension erro
-- vxreg.dat -- remote and local NW install, fixes the PV660f extension error
-- input.txt -- local NW install, fixes the perc2ext error
DFCT39037 NetWare installation of Marble need to check the correct path for Disney
-- install -- support.rul
DFCT38479 Limit VD max on NW4 to 1tb. 2tb on NW5 and nw6.
Fixed in PercPro.nlm: amincl.h amvdisk.h amdlist.cpp amdskgrp.cpp amvdisk.cpp
DFCT38989 Marble post false enclosure information warnning on the setup screen
-- install sting table
DFCT39328 After remote installation using It assistant on NT 4, Marble fail to launch.
-- web install -- NT client now installs MFC files, updated versions of mfc files from 8447 to 8665
(no defect) -- added mfc42ud.dll to mfc files for debug build
DFCT39174 Miscalculating Drive Size after new disk initialization on Adaptec
-- Perc2msg.mc
DFCT38470 strange data in "service tag" field (AMI)
-- amenclos.cpp
DFCT39494 strange data in "service tag" field (Adaptec)
-- amenclos.cpp
480.0
megalib 3.4.7.0 (release)
DFCT38116 Virtual disk is not properly created and no drive mapping in Windows NT4
Fixed in Megalib.dll
DFCT38286 Marble console does not recoganize hot swapping the HD
-- Fixed in Percpro.dll/nlm
(no defect) change events from system log to application log
-- modified Install
DFCT39035 Uninstall of Marble doesn't restore the Disney function.
-- modified INstall -- support.rul
DFCT39037 NetWare installation of Marble need to check the correct path for Disney (remote)
-- modified INstall -- support.rul
DFCT39022 Marble does not have an ability to see ZEMMs on Zappa
-- temp fix -- enclosure will show status of failure when ZEMM fails
-- modified percpro.dll -- amenclos.cpp & .h & ampoll.cpp & .h
DFCT39094 SNMP service is not sending traps to destination system in Marble.
-- modified snmpinit.cpp - Changed the OS log file that is searched for events to "System" rather than "Application".
-- *** Changed the code back to check the "Application" log file. This may change again in 3.1.1, but for now it will
-- remain as it has been.
DFCT39081 Secondary ZEMM failure causes system shut down and reboot in Joined-mode
-- modified aminit -> UpdateEnclosure() (AMI)
DFCT39087 Secondary ZEMM failure causes system shut down and reboot in Joined-mode
-- aminit.cpp on both Windows and Netware (Adaptec)
DFCT39065 Marble does not have an ability to see ZEMMs on Zappa (Adaptec)
-- see DFCT39022
DFCT39088 adding a new HD does not recoganize by the marble.
-- Fixed in percpro.dll/nlm
DFCT39026 Marble console crashes frequently with multiple DNS entries for IP address.
-- Fixed in amconsole.exe vxsvc.exe
479.1
DFCT33157 Undetermined message in status column for aspen driver during install.
-- Problem is GetFileInfoVersionSize() call is failing (OS call) -- opened DFCT39018 against Whistler 64 LE to track this.
-- Changed text on win64 to display "Undetermined" for the aspen driver check as a work around for time being.
DFCT38716 Unable to connect to a Bordeaux running marble using Array Manager Utilities.
Fixed GetSoftwareVersion funtion in SrevMgrDlg.cpp to look for marble keys in registry on win64 systems.
DFCT38993 Battery Recondition is not reported to ITA
Fixed memory problem in snmppro.nlm
DFCT38485 Node only installation bring up missing DLL error message on NT system
-- added Marble to path on node only install -- setup.rul, support.rul, ComponentEvents.rul
DFCT38810 Marble only reported one of the 4 temperature probes failure in Event Log (AMI)
-- reject dup of 38325 (already fixed)
DFCT38312 Remote installation using IT Assistant fail on both NT and windows 2000
-- changed the shortcut destination for amutils
DFCT38113 Delete the first created virtual disk on Vail will hard lock the system in W2K.
-- Percpro.dll
DFCT37794 Marble only reported one of the 4 temperature probes failure in Event Log (Adaptec)
-- aminit.cpp
DFCT38707 Marble shows Obsidian's slot numbers that are mismatching
-- objcontroller.cpp
DFCT38231 Typing mistake... "ystem" First "s" is missing
-- Changing an object name with Set Asset Tag was already documented. Putting in Fix state per Deeren's instructions.
DFCT33938 Drive initialization: no more than five initializations at one time.
-- The docs state in several places that more than five initializations can slow performance.
DFCT32546 Quick access window trouble
-- Revised the PV660F create virtual disk procedure to tell the user to use the Task pulldown menu option.
Added notes regarding the PV660F and a link to the revised procedure in the Quick Access Windows chapter.
DFCT33161 there is no 'SNMP extension agent' option in Custom option in marble
-- Removed the offending statement under Configuring Array Manager’s SNMP Support in the Event Monitoring chapter.
DFCT33971 improper information for Create a Dynamic Volume in Help
-- Removed reference to volume name.
DFCT34740 missing the section for Fibre Channel Arbitrated Loop in Help
-- Added section for fibre channel arbitrated loop.
DFCT35014 Context sensitive help is not working in certain properties box in Marble 3.1
-- Enclosure management for AMI and Adaptect is now documented in the online help. There is no help button for context-sensitive help for the physical array, fans, power supplies, and temperature probe objects.
DFCT37466 PERC 3/SC is not included in the Help as a new controller for marble 3.1 version
-- PERC 3/SC is now included wherever the docs list the AMI controllers.
DFCT37470 missing information for 'Type' in Enclosure Properties in Help
-- Enclosure management documentation for AMI and Adaptec has been completed.
DFCT37475 wrong information for 'Disable Alarm' for Enclosure in Help
-- Help now refers to the correct menu option for Disable Alarm.
DFCT37479 wrong information for 'Global Hot Spare' in Help
-- Defect does not appear to apply to the PV660F menu options. Index problem being tracked in separate defect.
DFCT37660 incorrect information for NetWAre support in Array Manager help.
-- Added reference to NetWare 4.2.
DFCT37658 incorrect information for Using this Product for NetWare in AM Help
-- Removed reference to NetWare.
DFCT37654 missing the Enclosure Management category in Array Manager Help in marble 3.1
-- Online help and Start menu help now both have new enclosure management info for AMI and Adaptec.
DFCT38470 strange data in Service Tag field.
-- Documentation already says that the Asset Name is displayed in the tree view.
DFCT37643 missing category Hide Unknown Windows Disks at STartup in AM Help
-- Start menu help has been updated.
DFCT37639 bitmap in the Array Manager help from STart menu has not been updated
-- Start menu help has been updated.
DFCT37529 Hide unknown windows disks option documented needs update.
-- Removed reference to offline disks in this section.
DFCT37653 should we change the Array Manager Service Manger to Utilities in AM Help ??
-- Fixed manually for 3.1.
DFCT38365 missing the Event ID in Help under the Viewing Event Listing category
-- Updated bitmap with event ID field. Added item to definition for the event ID.
DFCT37651 the bitmap for Left Pane in Array Manager Help has not updated in marble 3.1
-- Updated bitmap with enclosure objects
DFCT35018 the bitmap for the marble left pane hasn't updated in Help
-- Updated bitmap with enclosure objects
DFCT38624 click on Home from the AM Utilities would cause 'The page cannot be displayed'
-- This is fixed when I test the file on my system. It should be fixed in the build.
DFCT34757 improper information for Version Checking in marble's Help
-- This has been corrected in both the utilities help and the online help.
DFCT38988 should we add OMSA in the AM Utilities' Help for the Version Checking ??
-- Added section for OMSA.
DFCT36396 should we change 'Service Manager' to 'Utilities' in AM & Utilities Help ??
-- Updated name to Array Manager Utilities
DFCT33778 wrong driver version in Help for adaptec controllers in AM Service Manager
-- Updated firmware/drive information.
DFCT32990 Disk Properties and Virtual Disk Propertes has the same Help file
-- Added paragraph to the context-sensitive help regarding the Virtual Disk tab.
DFCT38961 some of the words should be bold in Help but they did not
-- Improper bolding is fixed.
DFCT38997 wrong names were given for the Enable/Disable Alarm in AM Help
-- Changed “sound” to “alarm” in sections under controller commands. Also added a “Quiet Alarm” section.
479.0
CHNG31151 It doesn't give a confirmation window when delete a policy
-- rejected dup of CHNG38807 Remove RAID Policy
DFCT32472 volume disk is never created when you apply the RAID policy
-- rejected dup of CHNG38807 Remove RAID Policy
DFCT33303 why there is no RAID-50 available in edit RAID Policy
-- rejected dup of CHNG38807 Remove RAID Policy
DFCT34010 New Policy 'Quick Format' & 'File Compression' check boxes couldn't be checked
-- rejected dup of CHNG38807 Remove RAID Policy
DFCT34011 Unable to span Raid 5 or 0 across more than 8 drives in RAID Policies
-- rejected dup of CHNG38807 Remove RAID Policy
DFCT34057 Raid Policy does not retain options chosen in create or modify policy
-- rejected dup of CHNG38807 Remove RAID Policy
DFCT34059 Raid Policy does not initialize VDafter creating them on quartz2
-- rejected dup of CHNG38807 Remove RAID Policy
CHNG36565 Scroll bar is needed to see all the headers on the Raid Policy dialog box
-- rejected dup of CHNG38807 Remove RAID Policy
DFCT38098 Marble reports log is corrupt with every boot.
-- Changed Offline status to Unknown for disks on NT.
-- amconsole.exe vxsvc.exe
DFCT38772 Marble enclosure support for AMI/NW reports good status unplugged PS
-- aminit.cpp, enclosure.cpp
DFCT38446 Add SNMP Traps for Adaptec event 598 and Veritas events 804, 805
-- modified arymgr.mib, arymgr.cfg - added traps 598, 10804(veritas 804), and 10805(veritas 805).
-- modified snmpext.dll - snmpinit.h, snmpinit.cpp, snmptrap.h, snmptrap.cpp
DFCT38599 SNMP Provider SNMPext.dll Causes SNMP service to Stop Unexpectedly
-- modified snmpext.dll - snmpquery.cpp
DFCT38777 Marble does not recognize Disney
-- modified amcheckreq.dll; install - support.rul, dialog.rul, string table
DFCT38325 Marble enclosure support for AMI/NW reports good status unplugged PS
-- modified aminit.cpp on windows and netware
DFCT37697 DM view pane is blank on a bordeaux.
-- amconsole.exe vxsvc.exe
CHNG34880 able to use IP address instead of Server name.
-- amconsole.exe vxsvc.exe
DFCT37478 amuninst doesn't remove directory
-- Modified NWUninstal\uninstall.cpp to remove the install directory.
DFCT38538: A provider DCProApi fail to load when connect to NW51 from a console.
-- modified input.txt -- local install was missing the file
DFCT38504: cannot view/manage controller properties remotely on NW box.
-- Modified percpro.nlm - ammenu.h
DFCT38249: Marble Power Supply and Fan status issue
-- modified percpro.dll - aminit.cpp
CHNG37467: Install needs to check for Disney agent
-- Modified servmgr\VersionTab.cpp, Netware_Direct_Install\AMInst.C, AMCheckReq\AMCheckReq.cpp, AMCheckReq\AMCheckReq.h, Install\support.rul, dialog.rul, setup.rul
DFCT37802: The Current Value in the property of temperature probe isn't accurate on Netware
-- modified aminit.cpp
DFCT37692 Marble does not report missing drives automatically
-- modified system and controller rescan
DFCT37694 Marble does not report new harddrive info. correctly
-- modified system and controller rescan
DFCT37800 Marble does't show correct status of failed HDDs under Enclosure/ Logical Arrays
-- see DFCT37802
DFCT38265 unblink while drives in resync status
-- ammenu.h
476.0
Fixes:
DFCT37462
added dcsif for netware to build
updated .iss files in build
DFCT38312
DFCT37542 Client connections do not work with console only client.
DFCT37032 No connection with bordeaux, using marble console only.
DFCT36982 Remote console connection to Bordeuax terminates and can no longer reconnect.
DFCT36937 W2k console only connects to LDM and not both LDM and VxSvc on Bordeaux system.
DFCT36351 Reactivate disk is an option on the destination disk when add mirror rebuilding.
DFCT37742
DFCT38009
DFCT38094
DFCT37733
DFCT37750
CHNG38090 Service Mgr needs ability to enable/disable volume capacity.
DFCT38144 Driver version should be changed in Utilities.
DFCT35052 NetWare now limits virtual disks to 1TB, aggregate of 2tb selection
DFCT38272
DFCT38017
DFCT38471 Adding a new HD does not recoganize by marble in lexus..NW5.1 romb
475.5
megalib 3.4.6.0 (release)
475.4
CHNG24450
DFCT29840 Can no longer reproduce.
DFCT33400
CHNG34204
DFCT35016 Can no longer reproduce.
DFCT36012
DFCT36922 Fix discovery of enclosure in clustered Taos configuration
DFCT33939 Doc'd in readme that Create Virtual Disk and Create Volume toolbar buttons not active w/PV660F.
DFCT33935 Doc'd in readme that a reboot or installing SP2 fixes problem of Reset Configuration not removing dynamic disks from tree view.
DFCT33933 Doc'd that a rescan is required on AMI for a VD to use additional space after using the Add Member command.
DFCT33936 Doc'd additional info under troubleshooting re: editing the hosts file when having trouble connecting to a NetWare server.
DFCT33942 Doc'd new sections on starting AM including launch in context and with a remote connection. Noted that NetWare also prompts for user name and passoword. Provided amconsole syntax to avoid specifying user name and password twice.
DFCT35995 Rejected: This was caused by a bug in install of Oracle Fail Safe. Oracle to fix.
DFCT36238 Marble causing a pause in processor utilization.
DFCT36749
DFCT36849
DFCT37234
DFCT37423
DFCT37496 'Required Version' for PERC 3/SC is incorrect in Utilities' Version tab.
DFCT37457
DFCT37346 Service Mgr doesn't set correct reg key for Direct Attach.
DFCT37536
DFCT37574
added dcsif32.dll to build
megalib 3.4.5.0 (release) fixes:
DFCT36714
475.3
megalib 3.4.4.11 (release version of 3.4.4.10)
DFCT35720
DFCT36033
DFCT36087
DFCT35768
DFCT37457
DFCT36526 firmware check incorrect
DFCT37080 marble can't make the different for Vail for different systems in installation
DFCT37318 Required firmware version for PERC3/SI is listed incorrectly in AM Utilities.
475.2
megalib 3.4.4.10 fixes:
35720
36087
36033
Miscompare
475.1:
Chng33434
Chng29140
DFCT23995
DFCT34038
DFCT37326
Mylex fixes, Provider build 1.2.0.8:
DFCT36489 Disable partner doesn't update object tree
DFCT37096 Battery options not working
DFCT34182 Disk Management Service stops & Marble closes
DFCT34260 No progress indication in Array Manager during rebuild
operation
DFCT35425 Status not propragated to Arrays folder
DFCT36763 PV660F rescan doesn't hold hour glass in NW
Known issues for Mylex:
1) Console updates for NW can slow down or stop. This may cause the
console to become "out of date" with the state of the objects.
Workaround: Open a new console to the NetWare server.
475.0:
Split release into 3.1 and 3.1.1
3.1 contains old mylex from 3.0
3.1.1 contains current/new mylex with netware support
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.