#*************************************************************************** #* $VRTScprght: Copyright 1993 - 2003 VERITAS Software Corporation, All Rights Reserved $ * #*************************************************************************** #ecpyrght# # Device Mapping Files Update The downloadable containers, Mappings_4.5.tar or Mappings_4.5.zip contain the following three files: Readme.txt (this file) external_robot_mappings.txt external_drive_mappings.txt These external_*_mappings.txt files are used by the NetBackup "Device Configuration Wizard" to automatically configure new devices. The files do not affect the software's ability to use any of the devices, only the ability to recognize and automatically configure them. ********************************************* ********** IMPORTANT DISCLAIMER ************* ********** PLEASE READ: ************* ********************************************* The presence of a device in either mappings file does not indicate, expressed or implied, support of the device on the target NetBackup/Media Manager platform. Refer to the support web page, www.veritas.com, compatibility lists for a complete list of supported devices for NetBackup by platform and NetBackup release. These files are for NetBackup 4.5GA only and CAN NOT BE READ by other NetBackup releases. The external_robot_mappings.txt and the external_drive_mappings.txt files contain a Revision number in the file's header. Verify the new mappings files are the most recent available by checking www.veritas.com. Any mappings files without a Revision number, may be considered to be Revision 0 (zero). ********************************************* Installation Instructions: 1.) Download and extract the new mapping files Create a temporary directory or folder Obtain via ftp the Mappings_4.5.[ zip | tar ] file to the temporary directory/folder. Unzip Mappings_4.5.zip or /bin/tar xvf Mappings_4.5.tar This will create 3 files in the temporary location: Readme.txt (this file) external_drive_mappings.txt external_robot_mappings.txt 2.) Verify existing mappings files Revision. Windows Use Windows Explorer to locate the mappings files in <Temp Folder> and <Veritas Install Path>\NetBackup\share Use Notepad or Wordpad to view the mappings files. UNIX head -5 <temp_dir>/external_*_mappings.txt head -5 /usr/openv/share/external_*_mappings.txt Verify the new mappings files have a higher Revision number than the current mappings files. 3.) Save current files Always save the current files so they can be recovered if needed. This example uses the date to mark the saved files. Windows NetBackup servers: copy <Veritas Install Path>\NetBackup\share\external_drive_mappings.txt <Veritas Install Path>\NetBackup\share\external_drive_mappings.<date> copy <Veritas Install Path>\NetBackup\share\external_robot_mappings.txt <Veritas Install Path>\NetBackup\share\external_robot_mappings.<date> where <Veritas Install Path> defaults to C:\Program Files\Veritas UNIX NetBackup servers: cp <Veritas Install Path>/share/external_drive_mappings.txt <Veritas Install Path>/share/external_drive_mappings.<date> cp <Veritas Install Path>/share/external_robot_mappings.txt <Veritas Install Path>/share/external_robot_mappings.<date> where <Veritas Install Path> defaults to /usr/openv 4.) Copy new mappings files to install location: Windows NetBackup servers: copy <Temp Folder>\external_drive_mappings.txt <Veritas Install Path>\NetBackup\share\external_drive_mappings.txt copy <Temp Folder>\external_robot_mappings.txt <Veritas Install Path>\NetBackup\share\external_drive_mappings.txt UNIX NetBackup servers: cp <temp_dir>/external_drive_mappings.txt <Veritas Install Path>/share/external_drive_mappings.txt cp <temp_dir>/external_robot_mappings.txt <Veritas Install Path>/share/external_robot_mappings.txt 5.) Run the "Device Configuration Wizard." Deinstall Instructions: Windows NetBackup servers: copy <Veritas Install Path>\NetBackup\share\external_drive_mappings.<date> <Veritas Install Path>\NetBackup\share\external_drive_mappings.txt copy <Veritas Install Path>\NetBackup\share\external_robot_mappings.<date> <Veritas Install Path>\NetBackup\share\external_robot_mappings.txt where <Veritas Install Path> defaults to C:\Program Files\Veritas UNIX NetBackup servers: cp <Veritas Install Path>/share/external_drive_mappings.<date> <Veritas Install Path>/share/external_drive_mappings.txt cp <Veritas Install Path>/share/external_robot_mappings.<date> <Veritas Install Path>/share/external_robot_mappings.txt where <Veritas Install Path> defaults to /usr/openvDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.