1. PCCA00H.EXE Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (PCCA00H.EXE)

 DOWNLOAD NOW
OEMSETUP.INF Driver Update Utility 
;*******************************************************************************
;*                                                                            **
;*                     I N T E L   P R O P R I E T A R Y                      **
;*                                                                            **
;*   COPYRIGHT (c) 1993-1998 BY INTEL CORPORATION. ALL RIGHTS RESERVED.  NO   **
;*   PART  OF  THIS  PROGRAM OR PUBLICATION MAY BE REPRODUCED, TRANSMITTED,   **
;*   TRANSCRIBED, STORED IN A RETRIEVAL  SYSTEM,  OR  TRANSLATED  INTO  ANY   **
;*   LANGUAGE OR COMPUTER LANGUAGE IN ANY FORM OR BY ANY MEANS, ELECTRONIC,   **
;*   MECHANICAL, MAGNETIC, OPTICAL, CHEMICAL, MANUAL, OR OTHERWISE, WITHOUT   **
;*   THE PRIOR WRITTEN PERMISSION OF :                                        **
;*                                                                            **
;*                             INTEL CORPORATION                              **
;*                                                                            **
;*                          2200 MISSON COLLEGE BLVD                          **
;*                                                                            **
;*                     SANTA CLARA, CALIFORNIA 95052-8119                     **
;*                                                                            **
;*******************************************************************************
;***********************************************************************
; Windows NT OEMSETUP.INF for
;
;               Intel(R) PRO/100+ PCI Adapter
;
; Copyright) 1994-1998 Intel Corporation.  All rights reserved.
;***********************************************************************
; $Revision: 44 $
;
;***********************************************************************
; Define constants
;***********************************************************************
[FileConstants]
        Manufacturer  = "Intel"
        ModemEnabler  = "Cbmodem.sys"
        NDIS3         = "E100b.sys"
        NDIS4         = "E100bnt.sys"
        IAFT          = "iAFT.sys"
        IVLAN         = "iVLAN.sys"
        PROSet        = "PROSetp.cpl"
        PROMon        = "PROMon.exe"
        PROKdd        = "PROKddp.sys"
        PROdd         = "PROdd.sys"
        PROSetHelp    = "PROSetp.hlp"
        PROSetCnt     = "PROSetp.cnt"
        PROSetOld     = "PROSet.cpl"

        ProCaption   = "Windows NT Setup"
        ProCancel    = "Cancel"
        ProCancelMsg = "Windows NT Networking is not correctly installed.  " +
                        "Are you sure you want to cancel copying files?"
        ProCancelCap = "Network Setup Message"
        ProText1     = "Copying:"
        ProText2     = "To:"
        ProductKeyName = "SYSTEM\CurrentControlSet\Services\e100b"
        DriverExistMsg = "Network adapter of this kind is already installed in the system.You have to remove already existing adapter to install a new one."

;***********************************************************************
; Define file source constants.
;***********************************************************************
[FileConstants-Src]
        ModemEnablerSrc = "Cbmodem.sys"
        NDIS3Src        = "E100b.sys"
        NDIS4Src        = "E100bnt.sys"
        IAFTSrc         = "iAFT.sys"
        IVLANSrc        = "iVLAN.sys"
        PROSetSrc       = "PROSetp.cpl"
        PROMonSrc       = "PROMon.exe"
        PROKddSrc       = "PROKddp.sys"
        PROddSrc        = "PROdd.sys"
        PROSetHelpSrc   = "PROSetp.hlp"
        PROSetCntSrc    = "PROSetp.cnt"

;***********************************************************************
; Detect sections
;***********************************************************************
[DetectConstants]
OSName = {} ? $(PROSet) GetOSVersion

;***********************************************************************
; Define Option
;***********************************************************************
[Options]
        E100BDock
        E100B
        E100BPcmcia
        E100BEXP
        E100BPCI
        E10PPCI
        E100BRWA

[OptionsText]
        E100BDock = "Intel(R) PRO (Docking) Adapter"
        E100B = "Intel(R) PRO (Onboard) Adapter"
        E100BPcmcia = "Intel(R) PRO (Pcmcia) Adapter"

[Source Media Descriptions]
        1 = "Intel PRO Adapter CD-ROM or floppy disk", TAGFILE = d100disk

;***********************************************************************
; Returns information to Setup about the type of driver or drivers that
; can be installed by this INF file.
;***********************************************************************
[Identify]
        Return STATUS_SUCCESSFUL NetAdapter ""

;***********************************************************************
; This section returns information to the Setup program, listing the
; names of any drivers that can be installed by this INF file. It also
; returns the text strings for each driver (in the requested language)
; to be used in the dialog box that asks the user to select the driver
; to install.
;***********************************************************************
[ReturnOptions]
        Set Status         = STATUS_SUCCESSFUL
        Set OptionList     = ^(Options, 1)
        Set OptionTextList = ^(OptionsText, 1)

        IfStr(i) $($1) != ""
                IfContains(i) $($1) not-in "PCI"
                        Set Status         = STATUS_NOTSUPPORTED
                        Set OptionList     = {}
                        Set OptionTextList = {}
                EndIf
        EndIf

        Return $(Status) $(OptionList) $(OptionTextList)

;***********************************************************************
; If the [ReturnOptions] section returns successfully, indicating the
; language is supported, Setup displays a dialog box from which the user
; can select a driver to install. If the user proceeds with the
; installation, Setup calls the [InstallOption] section.
;***********************************************************************
[InstallOption]
        Set Option   = $($1)
        Set SrcDir   = $($2)
        Set AddCopy  = $($3)
        Set DoCopy   = $($4)
        Set DoConfig = $($5)
;Vivek
        Set !G:DebugOutputControl = 0
        Set OptionLocal = $(Option)
        Set Option = E100B
;Vivek

        read-syms FileConstants
        read-syms FileConstants-Src

        IfStr(i) $(!NTN_InstallMode) == deinstall
                Set StartLabel = RemoveAdapter

        Else-IfStr(i) $(!NTN_InstallMode) == update
                Set StartLabel = UpdateAdapters

        Else-IfStr(i) $(!NTN_InstallMode) == bind
                Set StartLabel = BindingReview

        Else-IfStr(i) $(!NTN_InstallMode) == configure
                Set StartLabel = ConfigureAdapter

        Else-IfStr(i) $(!NTN_InstallMode) == install
                Set StartLabel = InstallAdapters

        EndIf

        Set from = FatalError
        Set to   = FatalError

        Goto $(StartLabel)

;***********************************************************************
; Called when the user clicks the Add button in the NCPA.
;***********************************************************************
InstallAdapters = +
        Debug-Output "Open key"
        Debug-Output $(ProductKeyName)
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(!REG_KEY_READ) KeyProduct
        Debug-Output "KeyProduct"$(KeyProduct)
        Ifstr(i) $(KeyProduct) !=  ""
                CloseRegKey $(KeyProduct)
                Debug-Output "Key already exists"
                set DlgType = "MessageBox"
                set STF_MB_TITLE = "Setup Message"
                set STF_MB_TEXT = $(DriverExistMsg)
                set STF_MB_TYPE = 1
                set STF_MB_ICON = 3
                set STF_MB_DEF  = 1
                ui start "Error Message"
                return STATUS_FAILED

        endif
        Install "Install-PROSet"

        LoadLibrary "" $(PROSet) hLib
        Debug-Output "<Install> Option = "$(Option)
        Debug-Output "<Install> Optloc = "$(OptionLocal)
        Debug-Output "<Install> PROMon = "$(PROMon)
        Debug-Output "<Install> Context = "$(STF_CONTEXTINFNAME)
        Debug-Output "<Install> ParamName = "$(!NetCardParameterName)
        Debug-Output "<Install> ParamValue = "$(!NetCardParameterValue)
;Vivek
        LibraryProcedure DllExitStr $(hLib) InstallAdapters +
                $(Option), $(PROMon), $(STF_CONTEXTINFNAME), +
             $(!NetCardParameterName), $(!NetCardParameterValue), , $(OptionLocal)
        FreeLibrary $(hLib)

        Ifstr(i) $(DllExitStr) == "ERROR"
                return STATUS_USERCANCEL
        EndIf

        detect DetectConstants

        Install "Install-Option"
        Install "Install-PROSet-More"


        return STATUS_SUCCESSFUL

;***********************************************************************
; Called when the user clicks the Update button in the NCPA.
;***********************************************************************
UpdateAdapters = +

        Install "Install-PROSet"

        LoadLibrary "" $(PROSet) hLib
        LibraryProcedure DllExitStr $(hLib) UpdateAdapters +
                $(PROMon), $(!NTN_RegBase)
        FreeLibrary $(hLib)

        Ifstr(i) $(DllExitStr) == "ERROR"
                return STATUS_USERCANCEL
        EndIf

        Set NewInfName = $(DllExitStr)

        detect DetectConstants

        Install "Install-Option"
        Install "Install-PROSet-More"

        return STATUS_SUCCESSFUL

;***********************************************************************
; Called when the binding engine runs and the software component has a
; Review = 1 flag in the CurrentVersion key of the software component
; key.
;***********************************************************************
BindingReview = +

        LoadLibrary "" $(PROSet) hLib
        LibraryProcedure DllExitStr $(hLib) BindingReview $(Option)
        FreeLibrary $(hLib)

        return STATUS_SUCCESSFUL

;***********************************************************************
; Called when user clicks the Remove button on the NCPA to remove an
; adapter.  We only need to remove the hardware components; the NCPA
; will remove the software component when the last hardware component
; is removed.  This function is also used to remove adapter teams.
;***********************************************************************
RemoveAdapter = +

        LoadLibrary "" $(PROSet) hLib
        Debug-Output "<Remove> Option = "$(Option)
        LibraryProcedure DllExitStr $(hLib) RemoveAdapter +
                $(Option), $(!NTN_RegBase)
        FreeLibrary $(hLib)

        Ifstr(i) $(DllExitStr) == "CLEANUP"
                Install "Install-Cleanup"
                Install "Install-PROMon-Cleanup"
        EndIf

        return STATUS_SUCCESSFUL

;***********************************************************************
; Called when the user selects Properties button on an adapter.
;***********************************************************************
ConfigureAdapter = +

        LoadLibrary "" $(PROSet) hLib
        LibraryProcedure DllExitStr $(hLib) DLLEntry +
                $(!NTN_RegBase), $(Option)
        FreeLibrary $(hLib)

        Ifstr(i) $(DllExitStr) == "REBOOT"
                return STATUS_SUCCESSFUL
        EndIf

        return STATUS_USERCANCEL

;***********************************************************************
; Something's busted!
;***********************************************************************
FatalError = +

        return STATUS_FAILED


;***********************************************************************
; Install the PROSet files.
;***********************************************************************
[Install-PROSet]
        Set STF_VITAL = 1
        Set STF_OVERWRITE        = "VERIFYSOURCEOLDER"

        AddSectionFilesToCopyList Files-PROSet-Drivers $(SrcDir) +
                $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-PROSet-System $(SrcDir) +
                $(!STF_WINDOWSSYSPATH)

        Set !STF_NCPA_FLUSH_COPYLIST = 1
        CopyFilesInCopyList

        Exit

[Files-PROSet-Drivers]
        1, $(PROKddSrc),     SIZE=50000, RENAME=$(PROKdd)
        1, $(PROddSrc),      SIZE=50000, RENAME=$(PROdd)

[Files-PROSet-System]
        1, $(PROSetSrc),     SIZE=50000, RENAME=$(PROSet)
        1, $(PROMonSrc),     SIZE=50000, RENAME=$(PROMon)
        1, $(PROSetHelpSrc), SIZE=50000, RENAME=$(PROSetHelp)
        1, $(PROSetCntSrc),  SIZE=50000, RENAME=$(PROSetCnt)

;***********************************************************************
; Finish up the install of PROSet
;***********************************************************************
[Install-PROSet-More]

        ; Install PROMon to run each time NT 4 starts
        IfStr(i) $(OSName) == "NT4"
                OpenRegKey $(!REG_H_LOCAL) "" +
                        "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
                        $(!REG_KEY_SET_VALUE) KeyWinRun
                SetRegValue $(KeyWinRun) {$(PROMon), 0, $(!REG_VT_SZ), $(PROMon)}
                CloseRegKey $(KeyWinRun)
        EndIf

        ; Remove Old PROSet
        AddFileToDeleteList $(PROSetOld)

        Exit

;***********************************************************************
; Remove PROMon hook
;***********************************************************************
[Install-PROMon-Cleanup]

        OpenRegKey $(!REG_H_LOCAL) "" +
                "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
                $(!REG_KEY_SET_VALUE) KeyWinRun
        DeleteRegValue $(KeyWinRun) $(PROMon)
        CloseRegKey $(KeyWinRun)

        Exit

;***********************************************************************
; Install the Option files.
;***********************************************************************
[Install-Option]
        Set STF_VITAL = 1
        Set STF_OVERWRITE = "VERIFYSOURCEOLDER"

        ; Prior to installing the drivers, lets see if the install media has the AFT
        ; driver and the VLAN driver.

        IfStr(i) $(OSName) == "NT4"
                set FileToCheck = $(SrcDir)$(ModemEnablerSrc)
                LibraryProcedure ModemEnablerFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
                set FileToCheck = $(SrcDir)$(IAFTSrc)
                LibraryProcedure AftFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
                set FileToCheck = $(SrcDir)$(IVLANSrc)
                LibraryProcedure VlanFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)

                Ifstr(i) $(ModemEnablerFilePresent) == "YES"
                        AddSectionFilesToCopyList Files-Option-Drivers-NT4-ModemEnabler $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
                Endif

                Ifstr(i) $(AftFilePresent) == "YES"
                        AddSectionFilesToCopyList Files-Option-Drivers-NT4-Aft $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
                Endif

                Ifstr(i) $(VlanFilePresent) == "YES"
                        AddSectionFilesToCopyList Files-Option-Drivers-NT4-Vlan $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
                Endif
        Endif

        Set FilesOptionDrivers = "Files-Option-Drivers-"$(OSName)

        AddSectionFilesToCopyList $(FilesOptionDrivers) $(SrcDir) +
                $(!STF_WINDOWSSYSPATH)\drivers

        IfStr(i) $(NewInfName) != ""
                AddSectionFilesToCopyList Files-Option-Inf $(SrcDir) +
                        $(!STF_WINDOWSSYSPATH)
        EndIf

        Set !STF_NCPA_FLUSH_COPYLIST = 1
        CopyFilesInCopyList

        Exit

[Files-Option-Drivers-NT351]
        1, $(NDIS3Src), SIZE=50000, RENAME=$(NDIS3)

[Files-Option-Drivers-NT4]
        1, $(NDIS4Src), SIZE=50000, RENAME=$(NDIS4)

[Files-Option-Drivers-NT4-ModemEnabler]
        1, $(ModemEnablerSrc), SIZE=50000, RENAME=$(ModemEnabler)

[Files-Option-Drivers-NT4-Aft]
        1, $(IAFTSrc),  SIZE=50000, RENAME=$(IAFT)

[Files-Option-Drivers-NT4-Vlan]
        1, $(IVLANSrc), SIZE=50000, RENAME=$(IVLAN)

[Files-Option-Inf]
        1, OEMSETUP.INF,   SIZE=50000, RENAME=$(NewInfName), +
                OVERWRITE=ALWAYS

;***********************************************************************
; Clean system of adapter files.
;***********************************************************************
[Install-Cleanup]

        AddFileToDeleteList drivers\$(NDIS3)
        AddFileToDeleteList drivers\$(NDIS4)
        AddFileToDeleteList drivers\$(IAFT)
        AddFileToDeleteList drivers\$(IVLAN)

        AddFileToDeleteList $(PROSet)
        AddFileToDeleteList $(PROMon)
        AddFileToDeleteList drivers\$(PROKdd)
        AddFileToDeleteList drivers\$(PROdd)
        AddFileToDeleteList $(PROSetHelp)
        AddFileToDeleteList $(PROSetCnt)

        Exit
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web5, load: 1.04