;--------------------------------------------------------------
; OEMSETUP FILE FOR TDK Network Flyer Fast Ethernet CardBus Card , v4.22
; NDIS 4.0 - Windows NT 4.0 -
;
; Supported adapters:
; TDK Network Flyer 100
;--------------------------------------------------------------
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
"Jazz-Internal Bus"
PCI
[Options]
DC21143
[ConnectionTypeChoicesDC21143]
Connect_0 = "AutoSense", 0
Connect_1 = "10BaseT (TP) ", 2
Connect_2 = "10BaseT (TP) Full Duplex ", 3
Connect_3 = "10BaseT (TP) No_Link_Test", 4
Connect_4 = "100BaseTx (TP 100)", 8
Connect_5 = "100BaseTx (TP 100) Full Duplex", 9
;Mike
[IoBaseChoices]
;IO_0 = "Automatic",0
IO_1 = "0x500",1280
IO_2 = "0x1000",4096
IO_3 = "0x1200",4608
IO_4 = "0x1500",5376
IO_5 = "0x2000",8192
IO_6 = "0x4000",16384
IO_7 = "0x7000",28672
[InterruptChoices]
;IRQ_0 = "Automatic", 0
IRQ_1 = "3", 3
IRQ_2 = "4", 4
IRQ_3 = "5", 5
IRQ_4 = "7", 7
IRQ_5 = "9", 9
IRQ_6 = "10", 10
IRQ_7 = "11", 11
IRQ_8 = "12", 12
IRQ_9 = "13", 13
IRQ_10 = "14", 14
IRQ_11 = "15", 15
[StoreAndForwardChoices]
StFd_0 = "Enabled" , 1
StFd_1 = "Disabled" , 0
;Mike
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "DigitalEquipmentCorporation"
ProductMajorVersion = "4"
ProductMinorVersion = "22"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
VendorID = 4113 ;; 1011 (DEC)
ProductSoftwareName = "TDKFLY"
ProductSoftwareTitle = "TDK TDKFLY Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\TDKFLYS.sys"
NetRuleSoftwareType = "TDKFLYSys ndisDriver TDKFLYDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """TDKFLYSys"" yes no container"
NetRuleSoftwareClass = {"TDKFLYDriver basic"}
NetRuleSoftwareSWBindable = {"TDKFLYDriver TDKFLYERAdapter non exclusive 100"}
;OptionHelpFile = "TDKFLY.hlp"
ProductHardwareName = "TDKFLY"
StoreAndForward = 1 ;; Store_and_forward mode enabled
TxmThreshold100 = 512 ;; 100Mbps default threshold
ProductHardwareDC21143Title = "TDK Network Flyer 100"
NetRuleHardwareDC21143Type = "TDKFLYER TDKFLYERAdapter"
NetRuleHardwareDC21143Class = {"TDKFLYERAdapter basic"}
AdapterDC21143Type = 5 ;; PCI board
HelpDC21143Id = 50
DC21143CFID = 1642513 ;; 0x00191011
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
set !DebugOutputControl = 0
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set !DebugOutputControl = 0
; Shradha
;
; determine whether the SrcDir already has a backslash at the
; end
;
Debug-Output "<DBG: InstallOption: SrcDir = "$(SrcDir)
split-string $(SrcDir) "\." SrcDirList
QueryListSize SrcDirListSize $(SrcDirList)
set SrcDirEnd = *($(SrcDirList), $(SrcDirListSize))
ifstr $(SrcDirEnd) != "\"
set SrcDir = $(SrcDir)"\"
endif
Debug-Output "<DBG: InstallOption: new SrcDir = "$(SrcDir)
; setup environment
read-syms SomeImportantVars
; Shradha
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
set NetRuleSoftwareBindable = $($R1)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(Function$(Option)Title)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Debug-Output "<DBG: Begin> NTN_InstallMode = "$(!NTN_InstallMode)
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else-ifstr(i) $(Option) == "DE425"
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
;Mike
set IoBaseValue = *($(IoBaseList), $(DefaultIoBaseChoice))
set InterruptValue = *($(InterruptList), $(DefaultIrqChoice))
set ConnectionValue = *($(ConnectionList), 1)
set StFdValue = *($(StFdList), 1)
set EditTextIn = "1"
;Mike
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Debug-Output "<DBG: installAdapter> OpenRegKey "$(ProductKeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Debug-Output "<DBG: installAdapter> "$(ProductKeyName)" found !"
CloseRegKey $(KeyProduct)
Debug-Output "<DBG: installAdapter> NTN_RegBase = "$(!NTN_RegBase)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Debug-Output "<DBG: installAdapter> 1"
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
else
Debug-Output "<DBG: installAdapter> 2"
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
Debug-Output "<DBG: installAdapter> Setting OldVersionExisted"
set OldVersionExisted = $(TRUE)
endif
Endif
Debug-Output "<DBG: installAdapter> DoCopy "$(DoCopy)
; NT BUG_FIX Shradha
Debug-Output "<DBG: installAdapter> Change DoCopy from "$(DoCopy)" to YES"
set DoCopy = "YES"
ifint $(UseFixedSrcDir) == 1
goto set_fixed_srcdir
endif
; NT BUG_FIX Shradha
ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
;Shradha
; determine whether the SrcDir already has a backslash at the
; end
Debug-Output "<DBG: installAdapter: SrcDir = "$(SrcDir)
split-string $(SrcDir) "\" SrcDirList
QueryListSize SrcDirListSize $(SrcDirList)
set SrcDirEnd = *($(SrcDirList), $(SrcDirListSize))
ifstr $(SrcDirEnd) != "\"
set SrcDir = $(SrcDir)"\"
endif
; Shradha
endif
; NT BUG_FIX Shradha
set_fixed_srcdir = +
ifint $(UseFixedSrcDir) == 1
Debug-Output "<DBG: installAdapter> changing SrcDir to "+
$(FixedSrcDir)
set SrcDir = $(FixedSrcDir)
endif
; NT BUG_FIX Shradha
ifstr(i) $(DoCopy) == "YES"
Debug-Output "<DBG: installAdapter: SrcDir before install-hlp "$(SrcDir)
install "install-hlp"
; Shradha
; ----------------- now do the CSS detection bit
Debug-Output "<DBG: installAdapter> Calling INF_Get_CSS_Name"
LoadLibrary $(TDKSetupDiskName), $(!STF_WINDOWSSYSPATH)"\"$(CSSDLL) +
IdentHandle
LibraryProcedure ResultStr $(IdentHandle) INF_Get_CSS_Name
FreeLibrary $(IdentHandle)
Debug-Output "<DBG: installAdapter> ResultStr "$(ResultStr)
Ifstr(i) $(ResultStr) != "Softex 187"
;
; The AbortIfPhoenixCSSNotFound variable
; will be set to 1 in the inf shipped with
; Softex/Phoenix 187 CSS
;
ifint $(AbortIfPhoenixCSSNotFound) == 1
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) +
FATAL $(PhoenixCSSNotFoundMessage)
set CommonStatus = STATUS_USERCANCEL
goto end
endif
endif
set CSSNone = 0
set CSS187 = 0
set CSSSoftex187 = 0
set CSSOther = 0
set doAbort = 0
Ifstr(i) $(ResultStr) == "Softex Cardbus Enabler"
Debug-Output "<DBG: installAdapter> Softex Cardbus Enabler"
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) WARNING +
$(PreviousEnablerExistsMessage)
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "<DBG: installAdapter> Error $R0 "$($R0)
set CommonStatus = STATUS_USERCANCEL
goto end
else-ifstr(i) $($R1) == "OK"
Debug-Output "<DBG: installAdapter> OK"
set CSSNone = 1
else-ifstr(i) $($R1) == "CANCEL"
Debug-Output "<DBG: installAdapter> CANCEL"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
else-ifstr(i) $(ResultStr) == "Softex 187"
Debug-Output "<DBG: installAdapter> Softex 187"
set CSS187 = 1
set CSSSoftex187 = 1
ifint $(AbortIfPhoenixCSSFound) == 1
set doAbort = 1
endif
else-ifstr(i) $(ResultStr) == "Non Softex 187"
Debug-Output "<DBG: installAdapter> Non Softex 187"
set CSS187 = 1
ifint $(AbortIfCSSFound) == 1
set doAbort = 1
endif
else-ifstr(i) $(ResultStr) == "SystemSoft CardWizard"
Debug-Output "<DBG: installAdapter> systemSoft CardWizard"
set CSSOther = 1
ifint $(AbortIfCSSFound) == 1
set doAbort = 1
endif
else-ifstr(i) $(ResultStr) == "Other"
Debug-Output "<DBG: installAdapter> other"
set CSSOther = 1
ifint $(AbortIfCSSFound) == 1
set doAbort = 1
endif
else-ifstr(i) $(ResultStr) == "None"
set CSSNone = 1
Endif
ifint $(doAbort) == 1
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) +
FATAL $(SomeCSSFoundMessage)
set CommonStatus = STATUS_USERCANCEL
goto end
endif
Ifint $(CSSOther) == 1
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) +
FATAL $(SomeCSSFoundMessage)
set CommonStatus = STATUS_USERCANCEL
goto end
Endif
Ifint $(CSSNone) == 1
Debug-Output "<DBG: installAdapter> AddCardbusEnabler"
install "Install-RemoveCardbusEnabler"
install "Install-AddCardbusEnabler"
set CardbusEnablerInstalled = 1
Endif
;
; now copy the correct files
; we cannot rely on the old driver binaries that may
; be installed because the CSS may have changed on this
; machine since the last installation
install "Install-AllFiles"
;Shradha
endif
Debug-Output "<DBG: installAdapter> goto installProduct"
Goto installproduct
configureadapter = +
Ifstr(i) $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
Endif
Endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "ConnectionType"
set ConnectionIndex = $(ValueData)
else-Ifstr(i) $(ValueName) == "IoBaseAddress"
set IoBaseValueIndex = $(ValueData)
Debug-Output "<DBG: ConfigureAdapter> IoBaseValueIndex in registry = "$(IoBaseValueIndex)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set InterruptIndex = $(ValueData)
Debug-Output "<DBG: ConfigureAdapter> InterruptIndex in registry = "$(InterruptIndex)
else-ifstr(i) $(ValueName) == "StoreAndForward"
set StFdIndex = $(ValueData)
;Shradha
else-ifstr(i) $(ValueName) == "AdapterName"
set OldAdapterName = $(ValueData)
Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName)
;Shradha
endif
EndForListDo
; shradha
; ----------------- now do the CSS detection bit
Debug-Output "<DBG: adapterOptions> Calling INF_Get_CSS_Name"
LoadLibrary $(TDKSetupDiskName), $(!STF_WINDOWSSYSPATH)"\"$(CSSDLL) +
IdentHandle
LibraryProcedure ResultStr $(IdentHandle) INF_Get_CSS_Name
FreeLibrary $(IdentHandle)
Debug-Output "<DBG: adapterOptions> ResultStr "$(ResultStr)
Ifstr(i) $(ResultStr) == "Softex Cardbus Enabler"
set add_auto_options = 1
else-ifstr(i) $(ResultStr) == "Softex 187"
set add_auto_options = 1
else
set add_auto_options = 0
endif
Debug-Output "<DBG: adapterOptions> IoBaseValue = "$(IoBaseValue)
Debug-Output "<DBG: adapterOptions> InterruptValue = "$(InterruptValue)
ifint $(add_auto_options) == 1
Debug-Output "<DBG: adapterOptions> Adding Auto"
set IoBaseList = >($(IoBaseList), "Automatic")
set IoBaseValues = >($(IoBaseValues), 0)
set DefaultIoBaseChoice = 8
set IoBaseValue = *($(IoBaseList), $(DefaultIoBaseChoice))
Debug-Output "<DBG: adapterOptions> new IoBaseValue = "$(IoBaseValue)
set InterruptList = >($(InterruptList), "Automatic")
set InterruptValues = >($(InterruptValues), 0)
set DefaultIrqChoice = 12
set InterruptValue = *($(InterruptList), $(DefaultIrqChoice))
Debug-Output "<DBG: adapterOptions> new InterruptValue = "$(InterruptValue)
endif
; Shradha
set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
ifstr(i) $(ConnectionValue) == ""
set ConnectionValue = *($(ConnectionList), 2)
endif
;Mike
set IoBaseValue = *($(IoBaseList), ~($(IoBaseValues),$(IoBaseValueIndex)))
Debug-Output "<DBG: ConfigureAdapter> IoBaseValue in registry = "$(IoBaseValue)
ifstr(i) $(IoBaseValue) == ""
set IoBaseValue = *($(IoBaseList), $(DefaultIoBaseChoice))
endif
set InterruptValue = *($(InterruptList), +
~($(InterruptValues),$(InterruptIndex)))
Debug-Output "<DBG: ConfigureAdapter> InterruptValue in registry = "$(InterruptValue)
ifstr(i) $(InterruptValue) == ""
set InterruptValue = *($(InterruptList), $(DefaultIRQChoice))
endif
set StFdValue = *($(StFdList), ~($(StFdValues),$(StFdIndex)))
Debug-Output "<DBG: ConfigureAdapter> StFdValue in registry = "$(StFdValue)
ifstr(i) $(StFdValue) == ""
set StFdValue = *($(StFdList), 1)
endif
;Mike
adapteroptions = +
ifstr(i) $(Option) != "DE425"
set from = adapteroptions
read-syms FileDependentDlg$(!STF_LANGUAGE)
;; SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ConnectionIndex = $(Combo1Out)
;Mike
set IoBaseValueIndex = $(Combo2Out)
set InterruptIndex = $(Combo3Out)
set StFdIndex = $(Combo4Out)
;Mike
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
ui pop 1
goto end
endif
set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
;Mike
set IoBaseValue = *($(IoBaseValues), ~($(IoBaseList),$(IoBaseValueIndex)))
set InterruptValue = *($(InterruptValues), +
~($(InterruptList),$(InterruptIndex)))
set StFdValue = *($(StFdValues), ~($(StFdList),$(StFdIndex)))
;Mike
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
endif
installproduct =+
StartWait
Debug-Output "<DBG: installproduct> Option = "$(Option)
ifstr(i) $(Option) == "DE425"
Debug-Output "<DBG: installproduct> Calling EISAFindBus"
Shell $(UtilityInf), EISAFindBus, $($(Option)_1BYTE),$(EISA_MASK)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
set AdapterList = $($R1)
else
Debug-Output "<DBG: installproduct> Calling GetPCIInformation"
set-div DeviceID = $($(Option)CFID) 65536
Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> GetPCIInformation error"
goto ShellCodeError
endif
; ifstr(i) $($R0) == {}
; set Error = $(CANNOT_FIND_ANY_CARD)
; set CommonStatus = USER_CANCEL
; set from = end
; goto nonfatal
; endif
set AdapterList = $(Network_Flyer)
; set AdapterList = $($R0)
endif
Debug-Output "<DBG: installproduct> AdapterList "$(AdapterList)
Debug-Output "<DBG: installproduct> OldVersionExisted "$(OldVersionExisted)
ifint $(OldVersionExisted) == $(FALSE)
; NT BUG_FIX Shradha
Debug-Output "<DBG: installproduct> Changing DoCopy "$(DoCopy)" to YES"
set DoCopy = "YES"
ifint $(UseFixedSrcDir) == 1
Debug-Output "<DBG: installproduct> Setting SrcDir to "$(FixedSrcDir)
set SrcDir = $(FixedSrcDir)
goto skip_src_dir
endif
; NT BUG_FIX Shradha
Debug-Output "<DBG: installproduct> DoCopy "$(DoCopy)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> DoAskSource error"
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Debug-Output "<DBG: installproduct> DoAskSource error 2"
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "<DBG: installproduct> DoAskSource user cancel"
Goto successful
Endif
Set SrcDir = $($R1)
Debug-Output "<DBG: installproduct> SrcDir "$(SrcDir)
;Shradha
; determine whether the SrcDir already has a backslash at the
; end
Debug-Output "<DBG: installProduct: SrcDir = "$(SrcDir)
split-string $(SrcDir) "\" SrcDirList
QueryListSize SrcDirListSize $(SrcDirList)
set SrcDirEnd = *($(SrcDirList), $(SrcDirListSize))
ifstr $(SrcDirEnd) != "\"
set SrcDir = $(SrcDir)"\"
endif
;Shradha
Endif
; Shradha
;Debug-Output "<DBG: installproduct> Calling install-option"
;install "Install-Option"
;
;ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
; Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
; endif
; set Error = $($R0)
; goto fatal
;endif
; Shradha
; NT BUG_FIX Shradha
skip_src_dir = +
; NT BUG_FIX Shradha
Debug-Output "<DBG: installproduct> AddSotwareComponent"
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> AddSotwareComponent err "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Debug-Output "<DBG: installproduct> RegistryErrorIndex "$(RegistryErrorIndex)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "<DBG: installproduct> AddValueList"
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> AddValueList err "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Debug-Output "<DBG: installproduct> RegistryErrorIndex "$(RegistryErrorIndex)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "<DBG: installproduct> AddValueList 2"
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> AddValueList 2 err "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Debug-Output "<DBG: installproduct> RegistryErrorIndex "$(RegistryErrorIndex)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif
Debug-Output "<DBG: installproduct> before ForListDo "$(AdapterList)
ForListDo $(AdapterList)
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
Debug-Output "<DBG: installproduct> BusNum "$(BusNum)
Debug-Output "<DBG: installproduct> DeviceNum "$(DeviceNum)
Debug-Output "<DBG: installproduct> FunctionNum "$(FunctionNum)
Debug-Output "<DBG: installproduct> Option "$(Option)
ifstr(i) $(Option) == "DE425"
Debug-Output "<DBG: installproduct> IsNetCardAlreadyInstalled "
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> IsNetCard err "$($ShellCode)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
Debug-Output "<DBG: installproduct> IsNetCard err 2 "$($R0)
set Error = $($R0)
goto fatal
endif
Debug-Output "<DBG: installproduct> R1 "$($R1)
ifstr(i) $($R1) != "YES"
Debug-Output "<DBG: installproduct> AddHwComponent"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
Debug-Output "<DBG: installproduct> R4 "$($R4)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), +
$(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> Err ShellCode "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Debug-Output "<DBG: installproduct> RegistryErrorIndex "$(RegistryErrorIndex)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "<DBG: installproduct> AddValueList 3"
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> AddValueList 3 err "$($ShellCode)
goto ShellCodeError
endif
set BusTypeNum = 2
;Shradha
ifstr $(OldAdapterName) == ""
Debug-Output "<DBG> setting OldAdapterName"
set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
endif
Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName)
ifint $(CSS187) == 1
; since card may not be present
; when the driver starts, we
; cannot add AdapterCFID to the
; registry
set CFIDValName = "SoftexCFID"
else
set CFIDValName = "AdapterCFID"
endif
Debug-Output "<DBG> CFIDValName = "$(CFIDValName)
;Shradha
set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
;Shradha
{CardbusBridgeLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+
{CardbusBridgeCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+
{CardbusCardLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+
{CardbusCardCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+
{CardbusBridgeWritePosting,$(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+
;Shradha
{$(CFIDValName),$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}
Debug-Output "<DBG: installproduct> AddValueList 4"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> AddValueList 4 err "$($ShellCode)
goto ShellCodeError
endif
;Shradha
ifint $(CSSSoftex187) == 1
set NewValueList = {{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}
Debug-Output "<DBG: installproduct> AddValueList 5"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> AddValueList 5 err "$($ShellCode)
goto ShellCodeError
endif
endif
;Shradha
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "<DBG: installproduct> AddValueList 6"
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct> AddValueList 6 err "$($ShellCode)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
endif
else
Debug-Output "<DBG: installproduct else> IsNetAlready ..."
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct else> IsNetAlready err "$($ShellCode)
goto ShellCodeError
endif
Debug-Output "<DBG: installproduct else> R0 "$($R0)
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
Debug-Output "<DBG: installproduct else> R1 "$($R1)
ifstr(i) $($R1) != "YES"
ifstr(i) $(!STF_GUI_UNATTENDED) != "YES"
; Shradha
ifint $(CSSSoftex187) == 1
set add_auto_options = 1
else-ifint $(CardbusEnablerInstalled) == 1
set add_auto_options = 1
else
set add_auto_options = 0
endif
ifint $(add_auto_options) == 1
Debug-Output "<DBG: installProduct> Adding Auto"
Debug-Output "<DBG: installProduct> IoBaseValue = "$(IoBaseValue)
set IoBaseList = >($(IoBaseList), "Automatic")
set IoBaseValues = >($(IoBaseValues), 0)
set DefaultIoBaseChoice = 8
set IoBaseValue = *($(IoBaseList), +
$(DefaultIoBaseChoice))
Debug-Output "<DBG: installProduct> new IoBaseValue = "$(IoBaseValue)
Debug-Output "<DBG: installProduct> InterruptValue = "$(InterruptValue)
set InterruptList = >($(InterruptList), "Automatic")
set InterruptValues = >($(InterruptValues), 0)
set DefaultIrqChoice = 12
set InterruptValue = *($(InterruptList), +
$(DefaultIrqChoice))
Debug-Output "<DBG: installProduct> new InterruptValue = "$(InterruptValue)
endif
; Shradha
read-syms FileDependentDlg$(!STF_LANGUAGE)
;; SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "<DBG: installproduct Dlgevent CONTINUE"
set ConnectionIndex = $(Combo1Out)
;Mike
set IoBaseValueIndex = $(Combo2Out)
set InterruptIndex = $(Combo3Out)
set StFdIndex = $(Combo4Out)
;Mike
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
Debug-Output "<DBG: installproduct Dlgevent BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
Debug-Output "<DBG: installproduct Dlgevent "$(DLGEVENT)
ui pop 1
goto end
endif
endif
Debug-Output "<DBG: installproduct else> AddHwComp"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
Debug-Output "<DBG: installproduct else> R4 "$($R4)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Debug-Output "<DBG: installproduct else> RegistryErrorIndex "$(RegistryErrorIndex)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
;Mike
set IoBaseValue = *($(IoBaseValues), ~($(IoBaseList),$(IoBaseValueIndex)))
set InterruptValue = *($(InterruptValues), +
~($(InterruptList),$(InterruptIndex)))
set StFdValue = *($(StFdValues), ~($(StFdList),$(StFdIndex)))
;Mike
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "<DBG: installproduct else> AddValueList"
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode)
goto ShellCodeError
endif
set BusTypeNum = 5
;Shradha
ifstr $(OldAdapterName) == ""
Debug-Output "<DBG> setting OldAdapterName"
set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
endif
Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName)
ifint $(CSS187) == 1
set CFIDValName = "SoftexCFID"
else
set CFIDValName = "AdapterCFID"
endif
Debug-Output "<DBG> CFIDValName = "$(CFIDValName)
;Shradha
set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
;Shradha
{AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+
{CardbusBridgeLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+
{CardbusBridgeCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+
{CardbusCardLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+
{CardbusCardCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+
{CardbusBridgeWritePosting,$(NoTitle),$(!REG_VT_DWORD),1},+
;Shradha
{$(CFIDValName),$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}
Debug-Output "<DBG: installproduct else> AddValueList 2"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode)
goto ShellCodeError
endif
;Shradha
ifint $(CSSSoftex187) == 1
Debug-Output "<DBG: installproduct else> writing SoftexPcmcia"
set NewValueList = {{SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
;Shradha
ifint $($(Option)CFID) == $(DC21143CFID)
set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+
{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
Debug-Output "<DBG: installproduct else> AddValueList Snooze"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct else> ShellCode "$($ShellCode)
goto ShellCodeError
endif
endif
set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
Debug-Output "<DBG: installproduct else> AddValueList ConnType "
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct else> err "$($ShellCode)
goto ShellCodeError
endif
;Shradha
set NewValueList = { +
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseValue)} +
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptValue)} +
;Mike
{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StFdValue)}}
;Mike
Debug-Output "<DBG: installproduct else> AddValueList iobase irq"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct else> err "$($ShellCode)
goto ShellCodeError
endif
;Shradha
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "<DBG: installproduct else> AddValueList bindform"
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG: installproduct else> err "$($ShellCode)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
Debug-Output "<DBG: installproduct else> AddValueList busnum"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
CloseRegKey $(HardParameterKey)
endif
endif
EndForListDo
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
EndWait
Debug-Output "<DBG: installproduct else> goto successful"
goto successful
updateparameters =+
set HardParameterKey = $($R3)
;Mike
set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
set IoBaseValue = *($(IoBaseValues), ~($(IoBaseList),$(IoBaseValueIndex)))
set InterruptValue = *($(InterruptValues), +
~($(InterruptList),$(InterruptIndex)))
set StFdValue = *($(StFdValues), ~($(StFdList),$(StFdIndex)))
set NewValueList = {+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseValue)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptValue)},+
{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StFdValue)} }
;Mike
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Debug-Output "<DBG: removeAdapter> ProductKeyName "$(ProductKeyName)
Debug-Output "<DBG: removeAdapter> NTN_RegBase "$(!NTN_RegBase)
; Shradha
; ----------------- now do the CSS detection bit
Debug-Output "<DBG: removeAdapter> Calling INF_Get_CSS_Name"
LoadLibrary $(TDKSetupDiskName), $(!STF_WINDOWSSYSPATH)"\"$(CSSDLL) +
IdentHandle
LibraryProcedure ResultStr $(IdentHandle) INF_Get_CSS_Name
Debug-Output "<DBG: removeAdapter> ResultStr "$(ResultStr)
set CSSNone = 0
set CSS187 = 0
set CSSSoftex187 = 0
set CSSOther = 0
set doAbort = 0
Ifstr(i) $(ResultStr) == "Softex Cardbus Enabler"
Debug-Output "<DBG: removeAdapter> Softex Cardbus Enabler"
Debug-Output "<DBG: removeAdapter> install-RemoveCardbusEnabler"
install "install-RemoveCardbusEnabler"
set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\SocketS.sys
Debug-Output "<DBG: removeAdapter> INF_DeleteFile "$(ourFile)
LibraryProcedure ResultStr $(IdentHandle) INF_DeleteFile $(ourFile)
set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\CardS.sys
Debug-Output "<DBG: removeAdapter> INF_DeleteFile "$(ourFile)
LibraryProcedure ResultStr $(IdentHandle) INF_DeleteFile $(ourFile)
set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\Enabler.sys
Debug-Output "<DBG: removeAdapter> INF_DeleteFile "$(ourFile)
LibraryProcedure ResultStr $(IdentHandle) INF_DeleteFile $(ourFile)
Debug-Output "<DBG: removeAdapter> install-DecHalRefCount"
install "install-DecHalRefCount"
Endif
Debug-Output "<DBG: removeAdapter> FreeLibrary "$(CSSDLL)
FreeLibrary $(IdentHandle)
; Shradha
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "<DBG: removeAdapter> RemoveSoftwareComponent Manuf: "$(Manufacturer)" ProductSoftwareName: "$(ProductSoftwareName)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Debug-Output "<DBG: removeAdapter> RemoveHardwareComponent Manuf: "$(Manufacturer)" ProductSoftwareName: "$(ProductSoftwareName)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
; Shradha
Debug-Output "<DBG: term: CommonStatus "$(CommonStatus)
Debug-Output "<DBG: term: NTN_InstallMode "$(!NTN_InstallMode)
Ifstr(i) $(!NTN_InstallMode) != install
goto final_term
endif
Debug-Output "<DBG: term>: CardbusEnablerInstalled "+
$(CardbusEnablerInstalled)
ifint $(CardbusEnablerInstalled) != 1
goto final_term
endif
;
; installation failed/succeeded after having installed cardbus
; enabler
;
ifstr(i) $(CommonStatus) == "STATUS_SUCCESSFUL"
Debug-Output "<DBG: term>: successful installation !"
Debug-Output "<DBG: term>: install-IncHalRefCount"
install "install-IncHalRefCount"
goto final_term
endif
Debug-Output "<DBG: term>: Doing cleanup after error !"
Debug-Output "<DBG: term> install-RemoveCardbusEnabler"
install "install-RemoveCardbusEnabler"
Debug-Output "<DBG: term> deleting files"
LoadLibrary $(TDKSetupDiskName), +
$(!STF_WINDOWSSYSPATH)"\"$(CSSDLL) IdentHandle
set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\SocketS.sys
LibraryProcedure ResultStr $(IdentHandle) +
INF_DeleteFile $(ourFile)
set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\CardS.sys
LibraryProcedure ResultStr $(IdentHandle) +
INF_DeleteFile $(ourFile)
set ourFile = $(!STF_WINDOWSSYSPATH)\drivers\Enabler.sys
LibraryProcedure ResultStr $(IdentHandle) +
INF_DeleteFile $(ourFile)
FreeLibrary $(IdentHandle)
final_term = +
; Shradha
Return $(CommonStatus)
[Install-Option]
; Shradha
Exit
; Shradha
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
;Shradha
[Install-AllFiles]
set STF_VITAL = ""
Ifint $(CSS187) == 1
ifint $(AbortIfPhoenixCSSNotFound) == 1
set driverSrcDir = $(SrcDir)
else
set driverSrcDir = $(SrcDir)$(TdkDir)187
endif
Else
Ifint $(CSSOther) == 1
set driverSrcDir = $(SrcDir)$(TdkDir)other
Else
set driverSrcDir = $(SrcDir)$(TdkDir)point
AddSectionFilesToCopyList Files-cbenabler +
$(SrcDir)$(TdkDir)enabler $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-hal $(SrcDir)$(TdkDir)enabler +
$(!STF_WINDOWSSYSPATH)
EndIf
Endif
Debug-Output "<DBG: Option> driverSrcDir = "$(driverSrcDir)
AddSectionFilesToCopyList Files-$(Option) $(driverSrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
; Shradha
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
;Shradha
[Install-Hlp]
set STF_VITAL = ""
; AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
; Shradha
AddSectionFilesToCopyList Files-CSSDLL $(SrcDir) $(!STF_WINDOWSSYSPATH)
;Shradha
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-AddCardbusEnabler]
;
;
; First setup the PCMCIA database
;
;
set CBCardManufKey = $(PcmciaDbKey)"\"$(CBCardManufName)
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(CBCardManufKey)
OpenRegKey $(!REG_H_LOCAL) "" $(CBCardManufKey) $(MAXIMUM_ALLOWED) +
MyManufHandle
Ifstr $(MyManufHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(CBCardManufKey)" failed"
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(PcmciaDbKey)
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDbKey) +
$(MAXIMUM_ALLOWED) MyPcmciaKey
Ifstr $(MyPcmciaKey) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(PcmciaDbKey)" failed"
goto my_err_exit
endif
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(CBCardManufName)
CreateRegKey $(MyPcmciaKey) {$(CBCardManufName),0, +
GenericClass} "" $(MAXIMUM_ALLOWED) "" MyManufHandle
CloseRegKey $(MyPcmciaKey)
endif
Ifstr $(MyManufHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey failed "$(CBCardManufName)
goto my_err_exit
endif
OpenRegKey $(MyManufHandle) "" $(CBCardProdName) $(MAXIMUM_ALLOWED) +
MyProdHandle
Ifstr $(MyProdHandle) == $(KeyNull)
CreateRegKey $(MyManufHandle) {$(CBCardProdName),0, +
GenericClass} "" $(MAXIMUM_ALLOWED) "" MyProdHandle
endif
CloseRegKey $(MyManufHandle)
Ifstr $(MyProdHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey failed "$(CBCardProdName)
goto my_err_exit
endif
SetRegValue $(MyProdHandle) +
{Driver,$(NoTitle),$(!REG_VT_SZ),$(CBCardDriverName)}
SetRegValue $(MyProdHandle) +
{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}
CloseRegKey $(MyProdHandle)
;
;
; Open up services key
;
;
set myKey = "SYSTEM\CurrentControlSet\Services"
OpenRegKey $(!REG_H_LOCAL) "" $(myKey) $(MAXIMUM_ALLOWED) myKeyHandle
Ifstr $(myKeyHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(myKey)" failed"
Exit
Endif
;
;
; Now install Sockets
;
;
set subkey = "SocketS"
;set imgName = $(imgPath)"\"$(subkey)".sys"
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)
CreateRegKey $(myKeyHandle) {$(subkey),0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" subKeyHandle
Ifstr $(subKeyHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)" failed"
CloseRegKey $(myKeyHandle)
goto my_err_exit
Endif
SetRegValue $(subKeyHandle) {ErrorControl,$(NoTitle),$(!REG_VT_DWORD),1}
SetRegValue $(subKeyHandle) {Group,$(NoTitle),$(!REG_VT_SZ),+
"System Bus Extender"}
SetRegValue $(subKeyHandle) {Start,$(NoTitle),$(!REG_VT_DWORD),0}
SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),1}
SetRegValue $(subKeyHandle) {Type,$(NoTitle),$(!REG_VT_DWORD),1}
CloseRegKey $(subKeyHandle)
;
;
; Now install CardS
;
;
set subkey = "CardS"
;set imgName = $(imgPath)"\"$(subkey)".sys"
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)
CreateRegKey $(myKeyHandle) {$(subkey),0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" subKeyHandle
Ifstr $(subKeyHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)" failed"
CloseRegKey $(myKeyHandle)
goto my_err_exit
Endif
SetRegValue $(subKeyHandle) {ErrorControl,$(NoTitle),$(!REG_VT_DWORD),1}
SetRegValue $(subKeyHandle) {Group,$(NoTitle),$(!REG_VT_SZ),+
"System Bus Extender"}
SetRegValue $(subKeyHandle) {Start,$(NoTitle),$(!REG_VT_DWORD),0}
SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),3}
SetRegValue $(subKeyHandle) {Type,$(NoTitle),$(!REG_VT_DWORD),1}
CloseRegKey $(subKeyHandle)
;
;
; Now install Enabler
;
;
set subkey = "Enabler"
;set imgName = $(imgPath)"\"$(subkey)".sys"
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)
CreateRegKey $(myKeyHandle) {$(subkey),0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" subKeyHandle
Ifstr $(subKeyHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> CreateRegKey "$(myKey)"\"$(subkey)" failed"
CloseRegKey $(myKeyHandle)
goto my_err_exit
Endif
SetRegValue $(subKeyHandle) {ErrorControl,$(NoTitle),$(!REG_VT_DWORD),1}
SetRegValue $(subKeyHandle) {Group,$(NoTitle),$(!REG_VT_SZ),+
"System Bus Extender"}
SetRegValue $(subKeyHandle) {Start,$(NoTitle),$(!REG_VT_DWORD),0}
SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),4}
SetRegValue $(subKeyHandle) {Type,$(NoTitle),$(!REG_VT_DWORD),1}
CloseRegKey $(subKeyHandle)
;
;
; Update the tag for PCMCIA.sys
;
;
set subkey = $(myKey)"\pcmcia"
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(subkey)
OpenRegKey $(!REG_H_LOCAL) "" $(subkey) $(MAXIMUM_ALLOWED) subKeyHandle
Ifstr $(subKeyHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(subkey)" failed"
CloseRegKey $(myKeyHandle)
goto my_err_exit
Endif
SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),2}
CloseRegKey $(subKeyHandle)
;
;
;
; Close the Services key handle
;
;
CloseRegKey $(myKeyHandle)
;
;
; Update the Group load order
;
;
set myKey = "SYSTEM\CurrentControlSet\Control\GroupOrderList"
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(myKey)
OpenRegKey $(!REG_H_LOCAL) "" $(myKey) $(MAXIMUM_ALLOWED) myKeyHandle
Ifstr $(myKeyHandle) == $(KeyNull)
Debug-Output "<DBG: AddCardbusEnabler> OpenRegKey "$(myKey)" failed"
goto my_err_exit
Endif
Debug-Output "<DBG: AddCardbusEnabler> SetRegValue GroupOrderList in "$(myKey)
SetRegValue $(myKeyHandle) +
{"System Bus Extender",$(NoTitle),$(!REG_VT_BIN), {04, 00, 00, 00, 01, 00, 00, 00, 02, 00, 00, 00, 03, 00, 00, 00, 04, 00, 00, 00}}
Debug-Output "<DBG: AddCardbusEnabler> CloseRegKey "$(myKey)
CloseRegKey $(myKeyHandle)
my_err_exit = +
Exit
[Install-RemoveCardbusEnabler]
;
;
; Open up services key
;
;
set myKey = "SYSTEM\CurrentControlSet\Services"
OpenRegKey $(!REG_H_LOCAL) "" $(myKey) $(MAXIMUM_ALLOWED) myKeyHandle
Ifstr $(myKeyHandle) == $(KeyNull)
Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(myKey)" failed"
Exit
Endif
;
;
; Now uninstall Sockets
;
;
set subkey = "SocketS"
Debug-Output "<DBG: RemoveCardbusEnabler> DeleteRegTree "$(myKey)"\"$(subkey)
DeleteRegTree $(myKeyHandle) $(subkey)
Debug-Output "<DBG: RemoveCardbusEnabler> RegLastError "$(RegLastError)
;
;
; Now uninstall CardS
;
;
set subkey = "CardS"
Debug-Output "<DBG: RemoveCardbusEnabler> DeleteRegTree "$(myKey)"\"$(subkey)
DeleteRegTree $(myKeyHandle) $(subkey)
Debug-Output "<DBG: RemoveCardbusEnabler> RegLastError "$(RegLastError)
;
;
; Now uninstall Enabler
;
;
set subkey = "Enabler"
Debug-Output "<DBG: RemoveCardbusEnabler> DeleteRegTree "$(myKey)"\"$(subkey)
DeleteRegTree $(myKeyHandle) $(subkey)
Debug-Output "<DBG: RemoveCardbusEnabler> RegLastError "$(RegLastError)
;
;
; Update the tag for PCMCIA.sys
;
;
set subkey = $(myKey)"\pcmcia"
Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(subkey)
OpenRegKey $(!REG_H_LOCAL) "" $(subkey) $(MAXIMUM_ALLOWED) subKeyHandle
Ifstr $(subKeyHandle) == $(KeyNull)
Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(subkey)" failed"
CloseRegKey $(myKeyHandle)
goto my_err_exit2
Endif
SetRegValue $(subKeyHandle) {Tag,$(NoTitle),$(!REG_VT_DWORD),1}
Debug-Output "<DBG: RemoveCardbusEnabler> RegLastError "$(RegLastError)
CloseRegKey $(subKeyHandle)
;
;
;
; Close the Services key handle
;
;
CloseRegKey $(myKeyHandle)
;
;
; Update the Group load order back to what it should be !
;
;
set myKey = "SYSTEM\CurrentControlSet\Control\GroupOrderList"
Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(myKey)
OpenRegKey $(!REG_H_LOCAL) "" $(myKey) $(MAXIMUM_ALLOWED) myKeyHandle
Ifstr $(myKeyHandle) == $(KeyNull)
Debug-Output "<DBG: RemoveCardbusEnabler> OpenRegKey "$(myKey)" failed"
goto err_exit
Endif
Debug-Output "<DBG: RemoveCardbusEnabler> SetRegValue GroupOrderList in "$(myKey)
SetRegValue $(myKeyHandle) +
{"System Bus Extender",$(NoTitle),$(!REG_VT_BIN), {01, 00, 00, 00, 01, 00, 00, 00}}
Debug-Output "<DBG: RemoveCardbusEnabler> CloseRegKey "$(myKey)
CloseRegKey $(myKeyHandle)
my_err_exit2 = +
Exit
[Install-IncHalRefCount]
Debug-Output "<DBG: IncHalRefCount> OpenRegKey "$(HalRefCountKey)
OpenRegKey $(!REG_H_LOCAL) "" $(HalRefCountKey) $(MAXIMUM_ALLOWED) +
HalRefCountKeyHandle
Ifstr $(HalRefCountKeyHandle) == $(KeyNull)
Debug-Output "<DBG: IncHalRefCount> OpenRegKey "$(HalRefCountKey)" failed"
Debug-Output "<DBG: IncHalRefCount> OpenRegKey "$(SystemKey)
OpenRegKey $(!REG_H_LOCAL) "" $(SystemKey) +
$(MAXIMUM_ALLOWED) SystemKeyHandle
Ifstr $(SystemKeyHandle) == $(KeyNull)
Debug-Output "<DBG: IncHalRefCount> OpenRegKey "$(SystemKey)" failed"
goto my_err_exit3
endif
Debug-Output "<DBG: IncHalRefCount> CreateRegKey "$(HalRefCountKey)
CreateRegKey $(SystemKeyHandle) {$(SetupKey),0, +
GenericClass} "" $(MAXIMUM_ALLOWED) "" +
HalRefCountKeyHandle
CloseRegKey $(SystemKeyHandle)
endif
Ifstr $(HalRefCountKeyHandle) == $(KeyNull)
Debug-Output "<DBG: IncHalRefCount> CreateRegKey failed "$(HalRefCountKey)
goto my_err_exit3
endif
Debug-Output "<DBG: IncHalRefCount> GetRegValue "$(HalRefCountValueName)
GetRegValue $(HalRefCountKeyHandle) $(HalRefCountValueName) +
HalRefCountValue
ifint $(RegLastError) != 0
Debug-Output "<DBG: IncHalRefCount> RegLastError "$(RegLastError)
set HalRefCount = 1
else
Debug-Output "<DBG: IncHalRefCount> HalRefCountValue "$(HalRefCountValue)
set HalRefCountValueType = *($(HalRefCountValue), 3)
set HalRefCount = *($(HalRefCountValue), 4)
Debug-Output "<DBG: IncHalRefCount> HalRefCountValueType "$(HalRefCountValueType)
Debug-Output "<DBG: IncHalRefCount> curr HalRefCount "$(HalRefCount)
ifint $(HalRefCountValueType) != $(!REG_VT_DWORD)
Debug-Output "<DBG: IncHalRefCount> not DWORD !"
set HalRefCount = 1
else
set-add NewHalRefCount = $(HalRefCount), 1
set HalRefCount = $(NewHalRefCount)
endif
endif
Debug-Output "<DBG: IncHalRefCount> SetRegValue HalRefCount = "$(HalRefCount)
SetRegValue $(HalRefCountKeyHandle) {$(HalRefCountValueName),$(NoTitle),$(!REG_VT_DWORD),$(HalRefCount)}
Debug-Output "<DBG: IncHalRefCount> RegLastError "$(RegLastError)
Debug-Output "<DBG: IncHalRefCount> CloseRegKey"
CloseRegKey $(HalRefCountKeyHandle)
my_err_exit3 = +
Exit
[Install-DecHalRefCount]
Debug-Output "<DBG: DecHalRefCount> OpenRegKey "$(HalRefCountKey)
OpenRegKey $(!REG_H_LOCAL) "" $(HalRefCountKey) $(MAXIMUM_ALLOWED) +
HalRefCountKeyHandle
Ifstr $(HalRefCountKeyHandle) == $(KeyNull)
Debug-Output "<DBG: DecHalRefCount> OpenRegKey failed "$(HalRefCountKey)
goto my_err_exit4
endif
Debug-Output "<DBG: DecHalRefCount> GetRegValue "$(HalRefCountValueName)
GetRegValue $(HalRefCountKeyHandle) $(HalRefCountValueName) +
HalRefCountValue
ifint $(RegLastError) != 0
Debug-Output "<DBG: DecHalRefCount> RegLastError "$(RegLastError)
goto my_err_exit4
endif
Debug-Output "<DBG: DecHalRefCount> HalRefCountValue "$(HalRefCountValue)
set HalRefCountValueType = *($(HalRefCountValue), 3)
set HalRefCount = *($(HalRefCountValue), 4)
Debug-Output "<DBG: DecHalRefCount> HalRefCountValueType "$(HalRefCountValueType)
Debug-Output "<DBG: DecHalRefCount> curr HalRefCount "$(HalRefCount)
ifint $(HalRefCountValueType) != $(!REG_VT_DWORD)
Debug-Output "<DBG: DecHalRefCount> not DWORD !"
goto my_err_exit4
endif
ifint $(HalRefCount) > 1
set-sub NewHalRefCount = $(HalRefCount), 1
set HalRefCount = $(NewHalRefCount)
Debug-Output "<DBG: DecHalRefCount> SetRegValue HalRefCount = "$(HalRefCount)
SetRegValue $(HalRefCountKeyHandle) {$(HalRefCountValueName),$(NoTitle),$(!REG_VT_DWORD),$(HalRefCount)}
Debug-Output "<DBG: DecHalRefCount> RegLastError "$(RegLastError)
else
Debug-Output "<DBG: DecHalRefCount> DeleteRegValue "$(HalRefCountValueName)
DeleteRegValue $(HalRefCountKeyHandle) $(HalRefCountValueName)
endif
Debug-Output "<DBG: DecHalRefCount> CloseRegKey"
CloseRegKey $(HalRefCountKeyHandle)
my_err_exit4 = +
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
; AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = ""
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
STF_PLATFORM = PPC
STF_PLATFORM = Alpha
[Files-Inf]
2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-DC21143]
1,TDKFLYS.SYS , SIZE=999
;Shradha
[Files-cbenabler]
1,SocketS.SYS , SIZE=999
1,CardS.SYS , SIZE=999
1,Enabler.SYS , SIZE=999
[Files-hal]
1,hal.dll , SIZE=999 , BACKUP=hal.nt
[Files-CSSDLL]
1,DetectCS.dll , SIZE=999
;Shradha
;[Files-Hlp]
;1,TDKFLY.HLP , SIZE=999
[LanguagesSupported]
ENG
[OptionsTextENG]
DC21143 = "TDK Network Flyer 100"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ProductSoftwareDescription = "TDK TDKFLY Driver"
FunctionDC21143Title = "TDK Network Flyer 100 Setup"
ProductHardwareDC21143Description = "TDK Network Flyer 100"
ConnectionList = ^(ConnectionTypeChoices$(Option), 1)
ConnectionValues = ^(ConnectionTypeChoices$(Option), 2)
;Mike
IoBaseList = ^(IoBaseChoices, 1)
IoBaseValues = ^(IoBaseChoices, 2)
InterruptList = ^(InterruptChoices, 1)
InterruptValues = ^(InterruptChoices, 2)
StFdList = ^(StoreAndForwardChoices, 1)
StFdValues = ^(StoreAndForwardChoices, 2)
;Mike
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
Network_Flyer = "{"{""21"",""0"",""0""}"}"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
;;ConnectionValue = *($(ConnectionList), 1)
DlgText = "HELP is not available with this version."
;DlgText = "Choose the proper cable type for the "+
; "network adapter. Select [Help] for a detailed "+
; "description of the available options of the list."
;;DlgTemplate = "ADAP_PROTO_COMBO"
;;DlgType = "Combination"
;Mike
DlgType = "RadioCombination"
DlgTemplate = "EE_16"
;Mike
Caption = $(Function$(Option)Title)
Combo1Label = "Connection Type:"
;Mike
Combo2Label = "I/O Base Address:"
Combo3Label = "Interrupt Level:"
Combo4Label = "Store And Forward:"
;Mike
Combo1List = $(ConnectionList)
Combo1Out = $(ConnectionValue)
;Mike
Combo2List = $(IoBaseList)
Combo2Out = $(IoBaseValue)
Combo3List = $(InterruptList)
Combo3Out = $(InterruptValue)
Combo4List = $(StFdList)
Combo4Out = $(StFdValue)
;Mike
ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(Option)Id)
[SomeImportantVars]
;
CBCardManufName = "TDK"
CBCardProdName = "NetworkFlyer"
CBCardDriverName = "TDKFly"
PcmciaDbKey = "SYSTEM\CurrentControlSet\Services\Pcmcia\Database"
TDKSetupDiskName = "TDK NetworkFlyer Setup Disk"
CSSDLL = DetectCS.dll
;
DefaultIoBaseChoice = 1 ;IoBase=0x500, see List of IoBaseChoices
DefaultIrqChoice = 7 ;IRQ=11, see List of IrqChoices
;
!G:DebugOutputControl = 0
CardbusEnablerInstalled = 0
;
PreviousEnablerExistsMessage = "A version of TDK Cardbus Enabler "+
"Software has been detected on "+
"your machine. Select OK to overwrite the version that is currently "+
"installed. If you select CANCEL, you must manually uninstall the "+
"software before installing this network adapter."
;
SomeCSSFoundMessage = "Your machine has a Card and Socket "+
"Services installed. Please contact TDK Corporation for the network "+
"adapter driver that works with this Card and Socket Services"
;
PhoenixCSSNotFoundMessage = "Your machine does not have the required "+
"Card and Socket Services installed. Please install the adapter after "+
"you have installed the Card and Socket Services."
;
AbortIfCSSFound = 1
AbortIfPhoenixCSSFound = 0
;
; **************************************************************
; Change the following variables to 1 when distributing inf
; with Softex/Phoenix 187 CSS
; **************************************************************
AbortIfPhoenixCSSNotFound = 1
;
; **************************************************************
; Change the following variables to 0 when distributing inf
; with Softex/Phoenix 187 CSS
; **************************************************************
UseFixedSrcDir = 0
;
;
SystemKey = "SYSTEM"
SetupKey = "Setup"
HalRefCountValueName = "SoftexHalCount"
HalRefCountKey = $(SystemKey)"\"$(SetupKey)
;
FixedSrcDir = "a:\"
TdkDir = "nt4.0\"
;
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.