;****************************************************************************
; OEMSETUP.INF
;****************************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
PCI
[Options]
em556n4
[OptionsTextENG]
em556n4 = "3Com Megahertz LAN + 56K Modem PC Card (Ethernet)"
[AllFileConstants]
GenericInfVersion = " V1.50"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "3Com"
[FileConstants-em556n4]
GenericAdapterName = "3Com Megahertz LAN + 56K Modem PC Card (Ethernet)"
GenericDriverName = "3Com Megahertz LAN + 56K Modem Driver (Ethernet)"
GenericSysName = "em556n4.sys"
; Product Info
ProductMajorVersion = "1"
ProductMinorVersion = "00"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
; Software
ProductSoftwareName = "em556n4"
ProductSoftwareDesc = "3Com Megahertz LAN + 56K Modem Driver (Ethernet)"
ProductSoftwareImage = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "em556n4Sys ndisDriver em556n4Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """em556n4Sys"" yes no container"
NetRuleSoftwareClass = {"em556n4Driver basic"}
NetRuleSoftwareBindable = {"em556n4Driver em556n4Adapter non exclusive 100"}
; Hardware
ProductHardwareName = "em556n4"
ProductHardwareDesc = "3Com Megahertz LAN + 56K Modem PC Card (Ethernet)"
NetRuleHardwareType = "em556n4 em556n4Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"em556n4Adapter basic"}
; Registry Key
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now = {Sec from 1-1-1970, Year, Month, Day, Hour, Minute, Second}
Now = {} ? $(!LIBHANDLE) GetSystemDate
;----------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
; INPUT: None
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;----------------------------------------------------------------------------
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;----------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
; INPUT: $($0): Language used. ( ENG | FRN | ... )
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
; $($R1): Option List
; $($R2): Option Text List
;----------------------------------------------------------------------------
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
; Check if the language requested is supported
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
; Check if the platforms requested is supported
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
; Form a list of all the options and another of the text representing
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
; 3. InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;------------------------------------------------------------------------
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 0
; Vivek
set ComPortPrefix = Serialem556n4
; Vivek
; Check if the language requested is supported
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Set AdapterTypeValue = 4355
set OldOption = $(Option)
set Option = em556n4
set-subst LF = "\n"
read-syms GeneralConstants
read-syms AllFileConstants
read-syms FileConstants"-"$(Option)
read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms AllFileConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;Vivek
; -------------------------- BEGIN FORCE FIX
; Update the modem info by reading from the ZZZx
; entries under the Serial\Parameters in registry
Debug-Output "<DBG: FORCE> Starting ModemIOBaseAddressList = "$(ModemIOBaseAddressList)
Debug-Output "<DBG: FORCE> Starting ModemIOBaseAddressValues = "$(ModemIOBaseAddressValues)
set SerParams = "SYSTEM\CurrentControlSet\Services\Serial\Parameters"
set ZZZComPort = $(SerParams)"\ZZZa"
install "install-update-modem-info"
set ZZZComPort = $(SerParams)"\ZZZb"
install "install-update-modem-info"
set ZZZComPort = $(SerParams)"\ZZZc"
install "install-update-modem-info"
set ZZZComPort = $(SerParams)"\ZZZd"
install "install-update-modem-info"
Debug-Output "<DBG: FORCE> Final ModemIOBaseAddressList = "$(ModemIOBaseAddressList)
Debug-Output "<DBG: FORCE> Final ModemIOBaseAddressValues = "$(ModemIOBaseAddressValues)
Debug-Output "<DBG: FORCE> Final ModemIrqList = "$(ModemIrqList)
Debug-Output "<DBG: FORCE> Final ModemIrqValues = "$(ModemIrqValues)
;-------------------------- END FORCE FIX
;Vivek
set CommonStatus = STATUS_SUCCESSFUL
EndWait
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
; You cannot config the software component
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "<DBG> Cannot configure the software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; Set the [Default values]
ifstr(i) $(Option) == em556n4
;Vivek
set IOBaseAddrValue = *($(IOBaseAddrList), 1) ; IOBase Address = 0x300
; set IOBaseAddrValue = *($(IOBaseAddrList), 17) ; IOBase Address = 0x300
; set MemoryAddrValue = *($(MemoryAddrList), 9) ; Memory Address = 0xD0000
set MemoryAddrValue = *($(MemoryAddrList), 1) ; Memory Address = 0xD0000
;Vivek
set IRQValue = *($(IRQList), 1) ; IRQ Level = 3
set MediaTypeValue = *($(MediaTypeList), 1) ; Media Type = TP
set ModemIOBaseAddressValue = *($(ModemIOBaseAddressList), 2) ; Modem IOBase Address = 0x2F8
set ModemInterruptNumberValue = *($(IRQList), 1) ; Modem IRQ Level = 3
set ComPortValue = *($(ComPortList), 2) ; COM2
set LANOnlyValue = *($(LANOnlyList), 1) ; Disabled
set FullDuplexValue = *($(FullDuplexList), 1) ; Disabled
set Static1Label = "Note: Modem and Network use same interrupt"
endif
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
; First, check whether the same version of the software exists
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
; Cannot Install the same software again
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
; Add a new adapter card?
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
; dll load addition
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
; [BFC]
Set FileToCheck = $($R1)\OEMSETNT.INF
LibraryProcedure FilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
Ifstr(i) $(FilePresent) != "YES"
Goto installadapter
Endif
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
; Get the current values of all the parameters
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "<DBG> Cannot find component product key"
goto fatalregistry
Endif
Endif
; Get the other parameters; they're attached to the service parameters key
Debug-Output "<DBG> INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "<DBG> INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
; We don't need the services key, so close it.
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "<DBG> Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
; Get the old values from the Registry [Get Values]
EnumRegValue $(KeyParameters) ValueList
ifstr(i) $(Option) == em556n4
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "IoBaseAddress_1"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
set MemoryAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "ModemInterruptNumber"
set ModemInterruptNumberIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "ComPort"
set ComPortIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "Transceiver"
set MediaTypeIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "LANOnly"
set LANOnlyIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "FullDuplex"
set FullDuplexIndex = $(ValueData)
;Vivek
else-ifstr(i) $(ValueName) == "AdapterName"
Debug-Output "<DBG> AdapterName in registry = "$(ValueData)
set OldAdapterName = $(ValueData)
;Vivek
endif
EndForListDo
set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
set ModemInterruptNumberValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex)))
ifstr(i) $(MemoryAddrValue) == ""
set MemoryAddrValue = *($(MemoryAddrValues), 2)
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
set ModemIOBaseAddressValue = *($(ModemIOBaseAddressList), ~($(ComPortValues),$(ComPortIndex)))
Debug-Output "<DBG> Configure/ComPortIndex "$(ComPortIndex)
Debug-Output "<DBG> Configure/ModemIOBaseAddressValue "$(ModemIOBaseAddressValue)
ifstr(i) $(ModemIOBaseAddressValue) == ""
set ModemIOBaseAddressValue = *($(ModemIOBaseAddressValues), 2)
endif
set ComPortValue = *($(ComPortList), ~($(ComPortValues),$(ComPortIndex)))
ifstr(i) $(ComPortValue) == ""
set ComPortValue = *($(ComPortValues), 2)
endif
set MediaTypeValue = *($(MediaTypeList), ~($(MediaTypeValues),$(MediaTypeIndex)))
ifstr(i) $(MediaTypeValue) == ""
set MediaTypeValue = *($(MediaTypeValues), 1)
endif
set LANOnlyValue = *($(LANOnlyList), ~($(LANOnlyValues),$(LANOnlyIndex)))
ifstr(i) $(LANOnlyValue) == ""
set LANOnlyValue = *($(LANOnlyValues), 1)
endif
set FullDuplexValue = *($(FullDuplexList), ~($(FullDuplexValues),$(FullDuplexIndex)))
ifstr(i) $(FullDuplexValue) == ""
set FullDuplexValue = *($(FullDuplexValues), 1)
endif
endif
; Put up the adapter configuration dialog if necessary.
; Note that $(CurrParamSettings) has the old known parameter values.
adaptersetup = +
Set from = adapteroptions
adapteroptions = +
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto skipoptions
endif
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
Debug-Output "<DBG> ----- Before calling my dialog -----"
Debug-Output "<DBG> Combo1Out "$(Combo1Out)
Debug-Output "<DBG> Combo2Out "$(Combo2Out)
Debug-Output "<DBG> Combo3Out "$(Combo3Out)
Debug-Output "<DBG> Combo6Out "$(Combo6Out)
Debug-Output "<DBG> Combo7Out "$(Combo7Out)
Debug-Output "<DBG> Combo8Out "$(Combo8Out)
Debug-Output "<DBG> ButtonPressed "$(ButtonPressed)
ui start "InputDlg" $(hLib)
Debug-Output "<DBG> ----- After calling my dialog -----"
set ExitButton = $(ButtonPressed)
Debug-Output "<DBG> Combo1Out "$(Combo1Out)
Debug-Output "<DBG> Combo2Out "$(Combo2Out)
Debug-Output "<DBG> Combo3Out "$(Combo3Out)
Debug-Output "<DBG> Combo6Out "$(Combo6Out)
Debug-Output "<DBG> Combo7Out "$(Combo7Out)
Debug-Output "<DBG> Combo8Out "$(Combo8Out)
Debug-Output "<DBG> ButtonPressed "$(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
ifstr(i) $(Option) == em556n4
set IOBaseAddrIndex = $(Combo1Out)
set MemoryAddrIndex = $(Combo2Out)
set IRQValueIndex = $(Combo3Out)
set ModemInterruptNumberIndex = $(Combo6Out)
set ComPortIndex = $(Combo7Out)
set LANOnlyIndex = $(Combo8Out)
set FullDuplexIndex = $(Combo9Out)
set ExitButton = $(ButtonPressed)
endif
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
set CommonStatus = STATUS_USERCANCEL
ui pop 1
Debug-Output "<DBG> Action: unknown. Bye."
goto end
endif
; If installing, go create the necessary keys;
; if configuring, they're already open.
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
; Add Software Component
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImage), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error"
goto ShellCodeError
endif
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "<DBG> Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
;Vivek
ifstr $(AdapterNumber) == ""
Debug-Output "<DBG> AdpaterNumber unknown !"
Debug-Output "<DBG> NTN_RegBase = "$(!NTN_RegBase)
set MyAdapterName = $(!NTN_RegBase)
Debug-Output "<DBG> MyAdapterName = "$(MyAdapterName)
Split-String $(MyAdapterName), "\", MyCardInfo
Debug-Output "<DBG> MyCardInfo = "$(MyCardInfo)
set AdapterNumber = *($(MyCardInfo),11)
Debug-Output "<DBG> AdapterNumber = "$(AdapterNumber)
endif
;Vivek
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDesc)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
Debug-Output "<DBG> AddValueList - SoftwareType, MajorVersion,..."
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "<DBG> Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(OldOption)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
Debug-Output "<DBG> AddValueList - type, use, bindform, class, ..."
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "<DBG> Resgitry error: add value list."
goto fatalregistry
endif
endif
; Create the HARDWARE\Netcard region and its corresponding service
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "<DBG> Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDesc)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
Debug-Output "<DBG> AddValueList - Manufacturer, Title, Description,..."
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(OldOption)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
Debug-Output "<DBG> AddValueList - type, bindform, class, InfOption"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "<DBG> Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
; REQUIRED: $(KeyParameters) contains service Parameters key handle
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error."
goto ShellCodeError
endif
set BusTypeNum = 1 ; Force ISA
; Add the rest of the parameters to the Services area
ifstr(i) $(Option) == em556n4
set MemoryAddrValue = *($(MemoryAddrValues), ~($(MemoryAddrList), $(MemoryAddrIndex)))
;Vivek
;set-add CommonMemoryAddrValue = $(MemoryAddrValue), 8192
ifint $(MemoryAddrValue) != 0
set-add CommonMemoryAddrValue = $(MemoryAddrValue), 8192
else
set CommonMemoryAddrValue = 0
endif
ifstr $(OldAdapterName) == ""
set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
Debug-Output "<DBG> setting OldAdapterName"
endif
Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName)
;Vivek
set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList), $(IOBaseAddrIndex)))
set MediaTypeValue = *($(MediaTypeValues), ~($(MediaTypeList), $(MediaTypeIndex)))
set ComPortValue = *($(ComPortValues), ~($(ComPortList), $(ComPortIndex)))
; Vivek
; check if user selected Auto for Interrupt - if so
; we should write the correct irq for the modem intr
; and write 0 for the network intr.
;
set ModemInterruptNumberValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
Debug-Output "<DBG> Install/ModemInterruptNumberValue "$(ModemInterruptNumberValue)
ifint $(ModemInterruptNumberValue) == 0
Debug-Output "<DBG> Install/ModemInterruptNumberValue is 0 !"
Debug-Output "<DBG> Install/ModemIRQValues "$(ModemIrqValues)
Debug-Output "<DBG> Install/ComPortList "$(ComPortList)
Debug-Output "<DBG> Install/ComPortIndex "$(ComPortIndex)
set ModemInterruptNumberValue = *($(ModemIrqValues), ~($(ComPortList),$(ComPortIndex)))
Debug-Output "<DBG> Install/ModemInterruptNumberValue "$(ModemInterruptNumberValue)
endif
; Vivek
set ModemIOBaseAddressValue = *($(ModemIOBaseAddressValues), ~($(ComPortList), $(ComPortIndex)))
Debug-Output "<DBG> Install/ComPortIndex "$(ComPortIndex)
Debug-Output "<DBG> Install/ModemIOBaseAddressValue "$(ModemIOBaseAddressValue)
set LANOnlyValue = *($(LANOnlyValues), ~($(LANOnlyList), $(LANOnlyIndex)))
set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList), $(FullDuplexIndex)))
set NewValueList = {{IoBaseAddress_1, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength_1, $(NoTitle),$(!REG_VT_DWORD), 16},+
{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseAddressValue)},+
{IoLength, $(NoTitle),$(!REG_VT_DWORD), 7},+
{PCCARDAttributeMemoryAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+
{PCCARDAttributeMemorySize, $(NoTitle),$(!REG_VT_DWORD),8192},+
{PCCARDAttributeMemoryOffset, $(NoTitle),$(!REG_VT_DWORD),0},+
{MemoryMappedBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(CommonMemoryAddrValue)},+
{MemoryMappedSize, $(NoTitle),$(!REG_VT_DWORD),4096},+
{PCCARDMemoryWindowOffset, $(NoTitle),$(!REG_VT_DWORD),0},+
; {Transceiver, $(NoTitle),$(!REG_VT_DWORD),$(MediaTypeValue)},+
{ModemIOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseAddressValue)},+
{ModemInterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(ModemInterruptNumberValue)},+
;Vivek
; The network interrupt should match modem interrupt in case of Auto
; {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(ModemInterruptNumberValue)},+
;Vivek
{ComPort, $(NoTitle),$(!REG_VT_DWORD),$(ComPortValue)},+
{LANOnly, $(NoTitle),$(!REG_VT_DWORD),$(LANOnlyValue)},+
{FullDuplex, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{InternalCTRL, $(NoTitle),$(!REG_VT_DWORD),1310722},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+
{CardType, $(NoTitle),$(!REG_VT_DWORD),3},+
;Vivek
{SoftexPcmcia, $(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+
;{Pcmcia, $(NoTitle),$(!REG_VT_DWORD),1},+
;Vivek
{OSType, $(NoTitle), $(!REG_VT_DWORD),1},+
{MediaType, $(NoTitle), $(!REG_VT_DWORD),1},+
{ModemFunction, $(NoTitle), $(!REG_VT_DWORD),1},+
{AdapterType, $(NoTitle), $(!REG_VT_DWORD), $(AdapterTypeValue)}}
endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
Debug-Output "<DBG> AddValueList - IoBaseAddress,..."
CloseRegKey $(KeyParameters)
; ----------------------------------------------------------------------------------------------------------
; add driver info to the SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation
; ----------------------------------------------------------------------------------------------------------
ifstr(i) $(Option) == em556n4
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
Debug-Output "<DBG> CreateRegKey (3Com)"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"3Com",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey $(MyPcmciaKey)
endif
CloseRegKey $(MyPcmciaHandle)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 3CXEM556" $(MAXIMUM_ALLOWED) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
Debug-Output "<DBG> CreateRegKey (Megahertz 3CXEM556)"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"Megahertz 3CXEM556",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
CloseRegKey $(MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 3CXEM556" $(MAXIMUM_ALLOWED) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"em556n4"},+
{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
Debug-Output "<DBG> AddValueList - Driver:REG_SZ:em556n4"
CloseRegKey $(MyPcmciaHandle)
endif
; ----------------------------------------------------------------------------------------------------------
; add the comm port info to the SYSTEM\CurrentControlSet\Services\Serial\Parameters section of the registry
; ----------------------------------------------------------------------------------------------------------
ifcontains(i) $(Option) in {"em556n4", "ELPC3"}
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial" $(MAXIMUM_ALLOWED) MyNewSerialHandle
Set NewValueList = { {PermitShare, $(NoTitle),$(!REG_VT_DWORD),1},+
{ShareInterrupt,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(MyNewSerialHandle), $(NewValueList)
CloseRegKey $(MyNewSerialHandle)
;Vivek
Debug-Output "<DBG> Checking if COM port needs to be added ...."
ifstr $(AdapterNumber) == ""
Debug-Output "<DBG> AdpaterNumber unknown !"
Debug-Output "<DBG> NTN_RegBase = "$(!NTN_RegBase)
set MyAdapterName = $(!NTN_RegBase)
Debug-Output "<DBG> MyAdapterName = "$(MyAdapterName)
Split-String $(MyAdapterName), "\", MyCardInfo
Debug-Output "<DBG> MyCardInfo = "$(MyCardInfo)
set AdapterNumber = *($(MyCardInfo),11)
Debug-Output "<DBG> AdapterNumber = "$(AdapterNumber)
endif
set ComPortName = $(ComPortPrefix)$(AdapterNumber)
Debug-Output "<DBG> ComPortName = "$(ComPortName)
Debug-Output "<DBG> Deleting old "$(ComPortName)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) MyNewSerialHandle
DeleteRegTree $(MyNewSerialHandle) $(ComPortName)
CloseRegKey $(MyNewSerialHandle)
;Vivek
Debug-Output "<DBG> Adding the COM port "$(ComPortName)
; OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\Serialem556n4" $(MAXIMUM_ALLOWED) MyNewSerialHandle
; Ifstr $(MyNewSerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialKey
CreateRegKey $(SerialKey) {$(ComPortName),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
CloseRegKey $(SerialKey)
; endif
;Vivek
Debug-Output "<DBG> ComPortIndex "$(ComPortIndex)
Debug-Output "<DBG> ModemInterruptNumberValue "$(ModemInterruptNumberValue)
ifint $(ModemInterruptNumberValue) == 0
Debug-Output "<DBG> ModemInterruptNumberValue is 0 !"
set ModemInterruptNumberValue = *($(ModemIrqValues), ~($(ComPortList),$(ComPortIndex)))
Debug-Output "<DBG> ModemInterruptNumberValue "$(ModemInterruptNumberValue)
endif
;Vivek
set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), "COM"$(ComPortValue)},+ ; "COMx"
{ForceFifoEnable, $(NoTitle), $(!REG_VT_DWORD), 0},+ ; Always false
;Vivek
{ExternallyConfiguredModem, $(NoTitle), $(!REG_VT_DWORD), 1},+
;Vivek
{Interrupt, $(NoTitle), $(!REG_VT_DWORD), $(ModemInterruptNumberValue)},+ ; Interrupt for 3C562 Modem
{PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(ModemIOBaseAddressValue)}} ; I/O Base address for 3C562 Modem
Shell $(UtilityInf), AddValueList, $(MyNewSerialHandle), $(NewValueList)
Debug-Output "<DBG> AddValueList - DosDevices, ForceFifiEnable,..."
CloseRegKey $(MyNewSerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) MyNewSerialHandle
Ifstr $(MyNewSerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) SerialKey
CreateRegKey $(SerialKey) {"SERIALCOMM",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
CloseRegKey $(SerialKey)
endif
SetRegValue $(MyNewSerialHandle) {"Serialem556n4",$(NoTitle),$(!REG_VT_SZ),"COM"$(ComPortValue)}
CloseRegKey $(MyNewSerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) MyNewSerialHandle
Ifstr $(MyNewSerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) SerialKey
CreateRegKey $(SerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
CloseRegKey $(SerialKey)
endif
SetRegValue $(MyNewSerialHandle) {"COM"$(ComPortValue)":",$(NoTitle),$(!REG_VT_SZ), "9600,n,8,1"}
CloseRegKey $(MyNewSerialHandle)
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "<DBG> Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
;Vivek
set AdapterName = $(!NTN_RegBase)
Split-String $(AdapterName), "\", CardInfo
Debug-Output "<DBG> CardInfo = "$(CardInfo)
set AdapterNumber = *($(CardInfo),11)
set ComPortName = $(ComPortPrefix)$(AdapterNumber)
Debug-Output "<DBG> ComPortName = "$(ComPortName)
Debug-Output "<DBG> AdapterNumber = "$(AdapterNumber)
;Vivek
; Remove the driver registry instances
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services" $(MAXIMUM_ALLOWED) MySerialHandle
DeleteRegKey $(MySerialHandle) "em556n4"
CloseRegKey $(MySerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) MySerialHandle
DeleteRegKey $(MySerialHandle) $(ComPortName)
CloseRegKey $(MySerialHandle)
; Delete the drivers
set RemoveList = {}
set RemoveList = >($(RemoveList), $(!STF_WINDOWSSYSPATH)"\DRIVERS\EM556N4.SYS")
Debug-Output "RemoveList = "$(RemoveList)
set Status = STATUS_SUCCESSFUL
ForListDo $(RemoveList)
Debug-Output "Removing "$($)
LibraryProcedure Status , $(!LIBHANDLE), DelFile $($)
Debug-Output "Status is "$(Status)
EndForListDo
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
else
;
; Error, cannot open net rules key
;
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
CloseRegKey $(ServiceKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMSETNT.INF"
Debug-Output $(InfName)"<DBG> **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)"<DBG> IRQ_Level is "$(!p:IRQ_Level)
Debug-Output $(InfName)"<DBG> IOBaseAddrValue is "$(!p:IOBaseAddrValue)
Debug-Output $(InfName)"<DBG> TransceiverValue is "$(!p:TransceiverValue)
Debug-Output $(InfName)"<DBG> MemoryAddr is "$(!p:MemoryAddr)
Debug-Output $(InfName)"<DBG> MappedValue is "$(!p:MappedValue)
return
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Megahertz Lan + Modem PC Card Installation Disk"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, OEMSETNT.INF, SIZE=43500, RENAME=$(!UG_Filename)
[Files-Dll]
1, em556nx.DLL, SIZE=100000
[Files-em556n4]
1, em556n4.SYS, SIZE=50000
[LanguagesSupported]
ENG
[AllFileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
DialogDllName = "em556nx.DLL"
;;;;;; START em556n4 ;;;;;;
[FileConstantsENG-em556n4]
FunctionTitle = "Megahertz LAN + 56K Modem PC Card (Ethernet)"
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
IOBaseAddrList = ^(IOBaseChoices, 1)
IOBaseAddrValues = ^(IOBaseChoices, 2)
MemoryAddrList = ^(MemoryAddrChoices,1)
MemoryAddrValues = ^(MemoryAddrChoices,2)
MediaTypeList = ^(MediaTypeChoices, 1)
MediaTypeValues = ^(MediaTypeChoices, 2)
ComPortList = ^(ComPortChoices, 1)
ComPortValues = ^(ComPortChoices, 2)
LANOnlyList = ^(LANOnlyChoices, 1)
LANOnlyValues = ^(LANOnlyChoices, 2)
ModemIOBaseAddressList = ^(ModemIOBaseChoices,1)
ModemIOBaseAddressValues = ^(ModemIOBaseChoices,2)
FullDuplexList = ^(FullDuplexChoices, 1)
FullDuplexValues = ^(FullDuplexChoices, 2)
;Vivek
ModemIrqList = ^(ModemIrqChoices,1)
ModemIrqValues = ^(ModemIrqChoices,2)
;Vivek
[DialogConstantsENG-em556n4]
Help = "Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG-em556n4]
DlgType = "RadioCombination"
DlgTemplate = "em556nx"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO, NO, NO, NO}
Combo1Label = "I/O Port Address:"
Combo2Label = "Memory Address:"
Combo3Label = "Network Interrupt:"
Combo4Label = "Media Type:"
Combo5Label = "Modem Port Address:"
Combo6Label = "Modem Interrupt:"
Combo7Label = "Com Port:"
;Combo8Label = "LANOnly Mode:"
Combo9Label = "Full Duplex:"
;
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(MemoryAddrList)
Combo2Out = $(MemoryAddrValue)
Combo3List = $(IRQList)
Combo3Out = $(IRQValue)
Combo4List = $(MediaTypeList)
Combo4Out = $(MediaTypeValue)
Combo5List = $(ModemIOBaseAddressList)
Combo5Out = $(ModemIOBaseAddressValue)
Combo6List = $(IRQList)
Combo6Out = $(ModemInterruptNumberValue)
Combo7List = $(ComPortList)
Combo7Out = $(ComPortValue)
Combo8List = $(LANOnlyList)
Combo8Out = $(LANOnlyValue)
Combo9List = $(FullDuplexList)
Combo9Out = $(FullDuplexValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List,Combo5List,Combo6List,Combo7List,Combo8List,Combo9List}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out,Combo5Out,Combo6Out,Combo7Out,Combo8Out,Combo9Out}
EditTextIn = {"",""}
EditTextLim = {"",""}
;;;;;; END em556n4 ;;;;;;
[MemoryAddrChoices]
MA_0 = "Auto", 0
MA_1 = "0xC8000", 819200
MA_2 = "0xC9000", 823296
MA_3 = "0xCA000", 827392
MA_4 = "0xCB000", 831488
MA_5 = "0xCC000", 835584
MA_6 = "0xCD000", 839680
MA_7 = "0xCE000", 843776
MA_8 = "0xCF000", 847872
MA_9 = "0xD0000", 851968
MA_10 = "0xD1000", 856064
MA_11 = "0xD2000", 860160
MA_12 = "0xD3000", 864256
MA_13 = "0xD4000", 868352
MA_14 = "0xD5000", 872448
MA_15 = "0xD6000", 876544
MA_16 = "0xD7000", 880640
MA_17 = "0xD8000", 884736
MA_18 = "0xD9000", 888832
MA_19 = "0xDA000", 892928
MA_20 = "0xDB000", 897024
MA_21 = "0xDC000", 901120
MA_22 = "0xDD000", 905216
MA_23 = "0xDE000", 909312
MA_24 = "0xDF000", 913408
MA_25 = "0xE0000", 917504
MA_26 = "0xE1000", 921600
MA_27 = "0xE2000", 925696
MA_28 = "0xE3000", 929792
MA_29 = "0xE4000", 933888
MA_30 = "0xE5000", 937984
MA_31 = "0xE6000", 942080
MA_32 = "0xE7000", 946176
MA_33 = "0xE8000", 950272
MA_34 = "0xE9000", 954368
MA_35 = "0xEA000", 958464
MA_36 = "0xEB000", 962560
MA_37 = "0xEC000", 966656
MA_38 = "0xED000", 970752
MA_39 = "0xEE000", 974848
MA_40 = "0xEF000", 978944
[IRQChoices]
IRQ_0 = "Auto",0
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "15",15
[ModemIOBaseChoices]
MdmIOBase_1 = "0x3F8",1016
MdmIOBase_2 = "0x2F8",760
MdmIOBase_3 = "0x3E8",1000
MdmIOBase_4 = "0x2E8",744
;Vivek
[ModemIrqChoices]
MdmIrq_1 = "4",4
MdmIrq_2 = "3",3
MdmIrq_3 = "4",4
MdmIrq_4 = "3",3
;Vivek
[ComPortChoices]
CP_1 = "COM1", 1
CP_2 = "COM2", 2
CP_3 = "COM3", 3
CP_4 = "COM4", 4
[LANOnlyChoices]
MS_1 = "Disabled", 0
MS_2 = "Enabled", 1
[IOBaseChoices]
IOBase_0 = "Auto",0
IOBase_1 = "0x200",512
IOBase_2 = "0x210",528
IOBase_3 = "0x220",544
IOBase_4 = "0x230",560
IOBase_5 = "0x240",576
IOBase_6 = "0x250",592
IOBase_7 = "0x260",608
IOBase_8 = "0x270",624
IOBase_9 = "0x280",640
IOBase_10 = "0x290",656
IOBase_11 = "0x2A0",672
IOBase_12 = "0x2B0",698
IOBase_13 = "0x2C0",714
IOBase_14 = "0x2D0",730
IOBase_15 = "0x2E0",746
IOBase_16 = "0x2F0",752
IOBase_17 = "0x300",768
IOBase_18 = "0x310",784
IOBase_19 = "0x320",800
IOBase_20 = "0x330",816
IOBase_21 = "0x340",832
IOBase_22 = "0x350",848
IOBase_23 = "0x360",864
IOBase_24 = "0x370",880
IOBase_25 = "0x380",896
IOBase_26 = "0x390",912
IOBase_27 = "0x3A0",928
IOBase_28 = "0x3B0",944
IOBase_29 = "0x3C0",960
IOBase_30 = "0x3D0",976
[MediaTypeChoices]
MT_1 = "TP (10BaseT)", 0
MT_2 = "COAX (10Base2)", 1
[FullDuplexChoices]
FD_1 = "Disabled", 0
FD_2 = "Enabled ", 1
; -------------------------- BEGIN FORCE FIX
[install-update-modem-info]
OpenRegKey $(!REG_H_LOCAL) "" $(ZZZComPort) $(MAXIMUM_ALLOWED) +
ZZZHandle
ifstr $(ZZZHandle) == $(KeyNull)
Debug-Output "<DBG: FORCE> OpenRegKey "$(ZZZComPort)" failed"
goto done_update_modem_info
endif
Debug-Output "<DBG: FORCE> GetRegValue DosDevices"
GetRegValue $(ZZZHandle) "DosDevices" DosDevicesValue
set DosDevicesValueType = *($(DosDevicesValue), 3)
set DosDevicesValueData = *($(DosDevicesValue), 4)
ifint $(DosDevicesValueType) != $(!REG_VT_SZ)
Debug-Output +
"<DBG: FORCE> Bad DosDevices "$(ZZZComPort)" "$(DosDevicesValue)
goto done_update_modem_info
endif
GetRegValue $(ZZZHandle) "PortAddress" PortAddressValue
set PortAddressValueType = *($(PortAddressValue), 3)
set PortAddressValueData = *($(PortAddressValue), 4)
ifint $(PortAddressValueType) != $(!REG_VT_DWORD)
Debug-Output +
"<DBG: FORCE> Bad PortAddress "$(ZZZComPort)" "$(PortAddressValue)
goto done_update_modem_info
endif
GetRegValue $(ZZZHandle) "Interrupt" InterruptValue
set InterruptValueType = *($(InterruptValue), 3)
set InterruptValueData = *($(InterruptValue), 4)
ifint $(InterruptValueType) != $(!REG_VT_DWORD)
Debug-Output +
"<DBG: FORCE> Bad Interrupt "$(ZZZComPort)" "$(InterruptValue)
goto done_update_modem_info
endif
; now update the correct modem info
Debug-Output +
"<DBG: FORCE> "$(DosDevicesValueData)": iobase = "$(PortAddressValueData)", irq = "$(InterruptValueData)
ifstr(i) $(DosDevicesValueData) == "COM1"
set comNumber = 1
else-ifstr(i) $(DosDevicesValueData) == "COM2"
set comNumber = 2
else-ifstr(i) $(DosDevicesValueData) == "COM3"
set comNumber = 3
else-ifstr(i) $(DosDevicesValueData) == "COM4"
set comNumber = 4
else
goto done_update_modem_info
endif
set-dectohex PortAddressValueDataHex = $(PortAddressValueData)
set-dectohex InterruptValueDataHex = $(InterruptValueData)
Debug-Output +
"<DBG: FORCE> PortAddressValueDataHex = "$(PortAddressValueData)
Debug-Output +
"<DBG: FORCE> InterruptValueDataHex = "$(InterruptValueData)
;
; Change ModemIOBaseAddressValues
;
set oldList = $(ModemIOBaseAddressValues)
set itemNumberToReplace = $(comNumber)
set newData = $(PortAddressValueData)
set return_addr = replace_modem_io_base
goto replace_list_item
replace_modem_io_base = +
set ModemIOBaseAddressValues = $(newList)
;
; Change ModemIOBaseAddressList
;
set oldList = $(ModemIOBaseAddressList)
set itemNumberToReplace = $(comNumber)
set newData = $(PortAddressValueDataHex)
set return_addr = replace_modem_io_base_list
goto replace_list_item
replace_modem_io_base_list = +
set ModemIOBaseAddressList = $(newList)
;
; Change ModemIrqValues
;
set oldList = $(ModemIrqValues)
set itemNumberToReplace = $(comNumber)
set newData = $(InterruptValueData)
set return_addr = replace_modem_irq
goto replace_list_item
replace_modem_irq = +
set ModemIrqValues = $(newList)
;
; Change ModemIrqList
;
set oldList = $(ModemIrqList)
set itemNumberToReplace = $(comNumber)
set newData = $(InterruptValueDataHex)
set return_addr = replace_modem_irq_list
goto replace_list_item
replace_modem_irq_list = +
set ModemIrqList = $(newList)
done_update_modem_info = +
ifstr $(ZZZHandle) != $(KeyNull)
CloseRegKey $(ZZZHandle)
endif
exit
replace_list_item = +
;
; INPUT: needs the following variables to be initialized
; - oldList
; - itemNumberToReplace
; - newData
; - return_addr (i.e. label to jump back to)
; OUTPUT: returns with the newList initialized
;
;Debug-Output "<DBG: FORCE> Replacing item number "$(itemNumberToReplace)" in the list "$(oldList)" with the data "$(newData)
set newList = {}
ForListDo $(oldList)
ifint $(#) == $(itemNumberToReplace)
set newList = >($(newList), $(newData))
else
set newList = >($(newList), $($))
endif
EndForListDo
goto $(return_addr)
;-------------------------- END FORCE FIX
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.