; ==========================================================================
; OEMSETUP.INF - 3Com Megahertz 10/100 LAN CardBus PC Card NT4.0 Setup File
; --------------------------------------------------------------------------
; Revision Histroy
; 1.0 - 9/17/98 Intial release (MS)
; 1.1 - 11/10/98 Add Auto Polarity feature to Dialog DLL (MS)
; 2.0 - 11/11/98 Add Unattended Installation Feature (IF)
; %VER 2.1 - 01/08/99 Initial Release for 3C575C (MS)
; ==========================================================================
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
PCI
PCMCIA
"Jazz-Internal Bus"
[Options]
; nishi
Elpc575C ;3C575C
; Elpc575 ;3C575C
; Elpc575A ;3C575B
; nishi
[OptionsTextENG]
; nishi
Elpc575C = "FE575C-3Com 10/100 LAN CardBus-Fast Ethernet PC Card"
; Elpc575 = "3Com-575C 10/100 CARDBUS PCCard (Ethernet)"
; Elpc575A = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)"
; nishi
[AllFileConstants]
GenericInfVersion = " v2.00"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;TrayIconExe = "comsmd.exe -try"
UninstallExe = "un3c575"
UnInstallName = "3Com PC Card Diagnostics Utilities"
Manufacturer = "3Com"
; nishi
;DISABLEPCMCIASYS = "1"
DISABLEPCMCIASYS = "0"
; nishi
[FileConstants-Elpc575a]
GenericAdapterName = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)"
GenericDriverName = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)"
;ms; GenericSysName = "Elpc575.sys"
GenericName = "Elpc575"
ProductMajorVersion = "2"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "Elpc575"
ProductSoftwareDescription = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)"
;ms; ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "Elpc575Sys ndisDriver Elpc575Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Elpc575Sys"" yes no container"
NetRuleSoftwareClass = {"Elpc575Driver basic"}
NetRuleSoftwareBindable = {"Elpc575Driver Elpc575Adapter non exclusive 100"}
ProductHardwareName = "Elpc575"
ProductHardwareDescription = "3Com Megahertz 10/100 LAN CardBus PC Card (Ethernet)"
NetRuleHardwareType = "Elpc575 Elpc575Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"Elpc575Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VERS1Manufacturer = "3Com"
VERS1Product = "Fast EtherLink XL PC Card"
VERS1Type = "Elpc575-FastEtherLink"
PCMCIA = 0
[FileConstants-Elpc575C]
GenericAdapterName = "FE575C-3COM 10/100 LAN CARDBUS-FAST ETHERNET PC CARD"
GenericDriverName = "FE575C-3COM 10/100 LAN CARDBUS-FAST ETHERNET PC CARD"
;ms; GenericSysName = "Elpc575.sys"
GenericName = "Elpc575C"
ProductMajorVersion = "2"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "Elpc575C"
ProductSoftwareDescription = "FE575C-3COM 10/100 LAN CARDBUS-FAST ETHERNET PC CARD"
;ms; ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "Elpc575CSys ndisDriver Elpc575CDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Elpc575CSys"" yes no container"
NetRuleSoftwareClass = {"Elpc575CDriver basic"}
NetRuleSoftwareBindable = {"Elpc575CDriver Elpc575CAdapter non exclusive 100"}
ProductHardwareName = "Elpc575C"
ProductHardwareDescription = "FE575C-3COM 10/100 LAN CARDBUS-FAST ETHERNET PC CARD"
NetRuleHardwareType = "Elpc575C Elpc575CAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"Elpc575CAdapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VERS1Manufacturer = "3Com"
VERS1Product = "Fast EtherLink XL PC Card"
VERS1Type = "Elpc575C-FastEtherLink"
PCMCIA = 0
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
NT350VersionConstant = "3.50"
NT310VersionConstant = "3.10"
NT400VersionConstant = "(4.0)"
DIAGCARDTYPE = "3C575"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
; nishi
;[DiagRegistry]
;
; OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTKEY
; OpenRegKey $(SOFTKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY
; ifstr $(COMKEY) == ""
; CreateRegKey $(SOFTKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY
; endif
;
; OpenRegKey $(COMKEY) "" "TNICDIAG" $(!REG_KEY_WRITE) TNICDIAGKEY
; ifstr $(TNICDIAGKEY) == ""
; CreateRegKey $(COMKEY) {"TNICDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TNICDIAGKEY
; endif
;
; OpenRegKey $(TNICDIAGKEY) "" "3C575" $(!REG_KEY_WRITE) 3C575KEY
; ifstr $(3C575) == ""
; CreateRegKey $(3C575KEY) {"3C575", 0, GenericClass} "" $(!REG_KEY_WRITE) "" 3C575KEY
; endif
;
; SetRegValue $(3C575KEY) {"DriverNames", 0, $(!REG_VT_SZ), "SYSTEM\EL575ND3.SYS;SYSTEM\EL575ND4.SYS"}
;
; OpenRegKey $(3C575KEY) "" "Extentions" $(!REG_KEY_WRITE) ExtentionsKEY
; ifstr $(ExtentionsKEY) == ""
; CreateRegKey $(3C575KEY) {"Extentions", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ExtentionsKEY
; endif
;
; ;OpenRegKey $(ExtentionsKEY) "" "Pace" $(!REG_KEY_WRITE) PaceKEY
; ; ifstr $(PaceKEY) == ""
; ; CreateRegKey $(ExtentionsKEY) {"Pace", 0, GenericClass} "" $(!REG_KEY_WRITE) "" PaceKEY
; ;endif
;
; ;SetRegValue $(PaceKEY) {"CPLName", 0, $(!REG_VT_SZ), "PACECFG.CPL"}
;
; CloseRegKey $(SOFTKEY)
; CloseRegKey $(COMKEY)
; CloseRegKey $(TNICDIAGKEY)
; CloseRegKey $(3C575KEY)
; CloseRegKey $(ExtentionsKEY)
;; CloseRegKey $(PaceKEY)
; return
;
; nishi
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms AllFileConstants
read-syms FileConstants"-"$(Option)
read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms AllFileConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
;MS 3C575B? 3C757C?
Ifstr(i) $(Option) == el3c574a
set T575Card = A
else-ifstr(i) $(Option) == elpc575C
set T575Card = B
endif
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
;ms;
;; NT v4.00 has NDIS4
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set NDIS_DISK_A = NDIS
set NDIS_VER = NDIS4
set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL575N4.SYS"
else
set NDIS_DISK_A = NDIS
set NDIS_VER = NDIS3
set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL575ND3.SYS"
endif
;ms;
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant)
Debug-Output "$(InfFile) $(Option): Configureadapter"
set Error = "Windows NT v3.10 is not support by this product"
goto fatal
endif
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; nishi
; set IRQValue = *($(IRQList), 5)
set IRQValue = *($(IRQList), 1)
; nishi
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
; nishi
; set MemoryAddrValue = *($(MemoryAddrList), 9)
set MemoryAddrValue = *($(MemoryAddrList), 1)
; nishi
set PolarityValue = *($(PolarityList),1)
set LinkValue = *($(LinkList), 1)
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
;ms;
Set FileToCheck = $($R1)\OEMSETUP.INF
LibraryProcedure FilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
Ifstr(i) $(FilePresent) != "YES"
Goto installadapter
Endif
;ms;
Set SrcDir = $($R1)
install "Install-Dll"
Debug-Output "Install-tnicdiag"
install "Install-tnicdiag"
StartWait
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
Debug-Output "$(InfFile) $(Option): Windows NT 4.00"
; OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt
; set TrayIconList = {COMSMDEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)}
; SetRegValue $(KeyNt) $(TrayIconList)
; Debug-Output "Install-TraynCpl"
; install "Install-TrayAndCpl"
; CloseRegKey $(KeyNt)
; RunProgram ExitCode "Windows Directory" "" COMSMD.EXE "-setup"
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" $(!REG_KEY_ALL_ACCESS) KeyNt
ifstr $(KeyNt) == ""
CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt
endif
OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2
ifstr $(KeyNt2) == ""
CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt2
endif
set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com PC Card Diagnostics"},+
{UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C575.EXE"}}
Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyNt)
CloseRegKey $(KeyNt2)
endif
EndWait
goto adaptersetup
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set MemoryAddrIndex = $(ValueData)
;ms else-ifstr(i) $(ValueName) == "SocketNumber"
;ms set SocketIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "AutoPolarity"
set PolarityValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "LinkSelection"
set LinkValueIndex = $(ValueData)
; nishi
else-ifstr(i) $(ValueName) == "AdapterName"
set OldAdapterName = $(ValueData)
Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName)
; nishi
endif
EndForListDo
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
; nishi set IRQValue = *($(IRQList), 2)
set IRQValue = *($(IRQList), 1)
endif
set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex)))
ifstr(i) $(MemoryAddrValue) == ""
; nishi set MemoryAddrValue = *($(MemoryAddrValues), 21)
set MemoryAddrValue = *($(MemoryAddrValues), 1)
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
set PolarityValue = *($(PolarityList), ~($(PolarityValues),$(PolarityValueIndex)))
ifstr(i) $(PolarityValue) == ""
set PolarityValue = *($(PolarityList), 1)
endif
set LinkValue = *($(LinkList), ~($(LinkValues),$(LinkValueIndex)))
ifstr(i) $(LinkValue) == ""
set LinkValue = *($(LinkList), 1)
endif
;ms set SocketValue = *($(SocketList), ~($(SocketValues),$(SocketIndex)))
;ms ifstr(i) $(SocketValue) == ""
;ms set SocketValue = *($(SocketValues), 0)
;ms endif
adaptersetup = +
;--------------------------------------------------------------------------
; 11/11/98 added for Unattended Setup by IF
;--------------------------------------------------------------------------
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto skipoptions
endif
;--------------------------------------------------------------------------
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
set ENABLER = 0
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOBaseAddrIndex = $(Combo1Out)
set MemoryAddrIndex = $(Combo2Out)
set IRQValueIndex = $(Combo3Out)
set PolarityValueIndex = $(Combo4Out)
set LinkValueIndex = $(Combo5Out)
;ms set SocketIndex = $(Combo7Out)
set ExitButton = $(ButtonPressed)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
set CommonStatus = STATUS_USERCANCEL
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
set BusTypeNum = 1
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
; nishi
ifstr $(OldAdapterName) == ""
Debug-Output "<DBG> setting OldAdapterName"
set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
endif
Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName)
; nishi
set PolarityValue = *($(PolarityValues), ~($(PolarityList), $(PolarityValueIndex)))
set MemoryAddrValue = *($(MemoryAddrValues),~($(MemoryAddrList), $(MemoryAddrIndex)))
set IRQValue = *($(IRQValues),~($(IRQList), $(IRQValueIndex)))
set IOBaseAddrValue = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex)))
set LinkValue = *($(LinkValues), ~($(LinkList), $(LinkValueIndex)))
;ms set SocketValue = *($(SocketValues), ~($(SocketList), $(SocketIndex)))
set NewValueList = {{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength, $(NoTitle),$(!REG_VT_DWORD), 127},+
{MemoryMappedBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+
{MemoryMappedSize, $(NoTitle),$(!REG_VT_DWORD),4096},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{AutoPolarity, $(NoTitle),$(!REG_VT_DWORD),$(PolarityValue)},+
{LinkSelection, $(NoTitle),$(!REG_VT_DWORD),$(LinkValue)},+
{MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+
;ms {SocketNumber, $(NoTitle),$(!REG_VT_DWORD),$(SocketValue)},+
{TransmitBufferSize, $(NoTitle),$(!REG_VT_DWORD),7168},+
{AdapterType, $(NoTitle),$(!REG_VT_DWORD),0},+
{DriverMode, $(NoTitle),$(!REG_VT_DWORD),1},+
{OSType, $(NoTitle),$(!REG_VT_DWORD),1},+
; nishi
{SoftexPcmcia, $(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterName, $(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+
; nishi
{PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
;------------------------------------------------------------------------
; 11/11/98 added for Unattended Setup by IF
;------------------------------------------------------------------------
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
;------------------------------------------------------------------------
CloseRegKey $(KeyParameters)
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4}
CloseRegKey $(PCMCIAKey)
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
;;************Start Uninstaller section*************************************************************;*
install "Install-Uninstaller" ;*
;*
;*
;; Set the keys in the registry nessisary for uninstallation ;*
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) KeyNt ;*
;*
set TrayIconList = {TNICDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} ;*
SetRegValue $(KeyNt) $(TrayIconList) ;*
CloseRegKey $(KeyNt) ;*
;*
;set NT key in registry so driver knows what operating system it is ;*
OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(!REG_KEY_ALL_ACCESS) KeyNt ;*
;*
set LoopList = {1,2,3,4,5,6,7,8} ;*
set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES} ;*
;*
ForListDo $(LoopList) ;*
OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey ;*
;*
ifstr $(TestKey) != $(KeyNull) ;*
SetRegValue $(TestKey) $(WinNTList) ;*
endif ;*
;*
CloseRegKey $(TestKey) ;*
EndForListDo ;*
;*
CloseRegKey $(KeyNt) ;*
;end set NT key section ;*
;;************Stop Uninstaller section**************************************************************;*
EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0}
CloseRegKey $(PCMCIAKey)
endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
Debug-Output "$(InfFile) $(Option): Windows NT 4.00 remove icon"
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt
; set TrayIconList = COMSMDEXE
DeleteRegValue $(KeyNt) $(TrayIconList)
CloseRegKey $(KeyNt)
endif
; nishi
; RunProgram ExitCode "Windows Directory" "" UN3C575.EXE "-inf"
; nishi
goto end
UpgradeSoftware = +
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
ifint $(Version) != $(ProductVersion)
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
else
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
endif
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMSETUP.INF"
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;;??AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; nishi
; AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir)$(NDIS_DISK_A) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; nishi
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURSEOLDER"
; nishi
; AddSectionFilesToCopyList Files-tnicdiag $(SrcDir)win32 $(!STF_WINDOWSSYSPATH)
; AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH)
;;?? AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir)$(NDIS_DISK_A) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; nishi
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
; nishi
; AddSectionFilesToCopyList Files-Dll$(T575Card) $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
; nishi
;ms AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
;[Install-tnicdiag]
; set STF_VITAL = ""
; AddSectionFilesToCopyList Files-tnicdiag $(SrcDir)win32 $(!STF_WINDOWSSYSPATH)
;; AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH)
; set !STF_NCPA_FLUSH_COPYLIST = TRUE
; CopyFilesInCopyList
; Exit
;[Install-TrayAndCpl]
; set STF_VITAL = ""
;; AddSectionFilesToCopyList Files-TrayAndCpl $(SrcDir)win32 $(!STF_WINDOWSSYSPATH)
; set !STF_NCPA_FLUSH_COPYLIST = TRUE
; CopyFilesInCopyList
; Exit
[Install-Uninstaller]
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Uninstaller $(SrcDir)win32 $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Source Media Descriptions]
1 = "Windows NT Setup Disk #1"
2 = "3Com Megahertz 10/100 LAN CardBus PC Card Installation Disk (Ethernet)"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, OEMSETUP.INF, SIZE=58000, RENAME=$(!UG_Filename)
[Files-Dll]
2, Elpc575.DLL, SIZE=21000
;[Files-tnicdiag]
;;2,tnicdiag.exe, SIZE=165504
;;2,tnicdiag.hlp, SIZE=20877
;;2,tvaraddr.txt, SIZE=113
;2,un3c575.exe, SIZE=100000
[Files-Uninstaller]
;;2,UN3C575.EXE, SIZE=100000
[Files-HwDll]
;2,hwaccess.dll, SIZE=20198
;2,pcomdrv.sys, SIZE=5000
;2,tc575cfg.dll, SIZE=59458
[Files-TrayAndCpl]
;2,comsmd.exe, SIZE=8957
[Files-NDIS4]
2,EL575N4.SYS , SIZE=60000
[Files-Elpc575C]
2,EL575N4.SYS , SIZE=60000
[Files-NDIS3]
2,EL575ND3.SYS , SIZE=60000
[LanguagesSupported]
ENG
[AllFileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
;ms 1/8/99 DialogDllName = "Elpc575.DLL"
[FileConstantsENG-Elpc575a]
DialogDllName = "Elpc575A.DLL"
FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
InterruptStyleValues = ^(InterruptStyleChoices, 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
MemoryAddrList = ^(MemoryAddrChoices,1)
MemoryAddrValues = ^(MemoryAddrChoices,2)
PolarityList = ^(PolarityChoices, 1)
PolarityValues = ^(PolarityChoices, 2)
;ms SocketList = ^(SocketChoices, 1)
;ms SocketValues = ^(SocketChoices, 2)
[FileConstantsENG-Elpc575C]
DialogDllName = "Elpc575.DLL"
FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
InterruptStyleValues = ^(InterruptStyleChoices, 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
MemoryAddrList = ^(MemoryAddrChoices,1)
MemoryAddrValues = ^(MemoryAddrChoices,2)
PolarityList = ^(PolarityChoices, 1)
PolarityValues = ^(PolarityChoices, 2)
LinkList = ^(LinkChoices, 1)
LinkValues = ^(LinkChoices, 2)
;ms SocketList = ^(SocketChoices, 1)
;ms SocketValues = ^(SocketChoices, 2)
[DialogConstantsENG-Elpc575a]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[DialogConstantsENG-Elpc575C]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG-Elpc575a]
DlgType = "RadioCombination"
DlgTemplate = "Elpc575"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO}
Combo1Label = "I/O Port:"
Combo2Label = "Memory Address:"
Combo3Label = "Interrupt:"
Combo4Label = "Auto Polarity:"
;ms Combo7Label = "PCCard Socket:"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(MemoryAddrList)
Combo2Out = $(MemoryAddrValue)
Combo3List = $(IRQList)
Combo3Out = $(IRQValue)
Combo4List = $(PolarityList)
Combo4Out = $(PolarityValue)
;ms Combo7List = $(SocketList)
;ms Combo7Out = $(SocketValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List, Combo4List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out}
EditTextIn = {"",""}
EditTextLim = {"",""}
[PolarityChoices]
Polarity_1 = "Enabled", 0
Polarity_2 = "Disabled", 32
[MemoryAddrChoices]
MA_0 = "Auto", 0
MA_1 = "0xC8000", 819200
MA_2 = "0xC9000", 823296
MA_3 = "0xCA000", 827392
MA_4 = "0xCB000", 831488
MA_5 = "0xCC000", 835584
MA_6 = "0xCD000", 839680
MA_7 = "0xCE000", 843776
MA_8 = "0xCF000", 847872
MA_9 = "0xD0000", 851968
MA_10 = "0xD1000", 856064
MA_11 = "0xD2000", 860160
MA_12 = "0xD3000", 864256
MA_13 = "0xD4000", 868352
MA_14 = "0xD5000", 872448
MA_15 = "0xD6000", 876544
MA_16 = "0xD7000", 880640
MA_17 = "0xD8000", 884736
MA_18 = "0xD9000", 888832
MA_19 = "0xDA000", 892928
MA_20 = "0xDB000", 897024
MA_21 = "0xDC000", 901120
MA_22 = "0xDD000", 905216
MA_23 = "0xDE000", 909312
[IRQChoices]
IRQ_0 = "Auto",0
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "15",15
[IOBaseAddrChoices]
IOBase_0 = "Auto",0
IOBase_1 = "0x1000",4096
IOBase_2 = "0x1100",4352
IOBase_3 = "0x1200",4608
IOBase_4 = "0x1300",4864
IOBase_5 = "0x1400",5120
IOBase_6 = "0x1500",5376
IOBase_7 = "0x1600",5632
IOBase_8 = "0x1700",5888
IOBase_9 = "0x2000",8192
IOBase_10 = "0x2100",8448
IOBase_11 = "0x2200",8704
IOBase_12 = "0x2300",8960
IOBase_13 = "0x2400",9216
IOBase_14 = "0x2500",9472
IOBase_15 = "0x2600",9728
IOBase_16 = "0x2700",9984
IOBase_17 = "0x3000",12288
IOBase_18 = "0x3100",12544
IOBase_19 = "0x3200",12800
IOBase_20 = "0x3300",13056
IOBase_21 = "0x3400",13312
IOBase_22 = "0x3500",13568
IOBase_23 = "0x3600",13824
IOBase_24 = "0x3700",14080
IOBase_25 = "0x3800",14336
IOBase_26 = "0x3900",14592
IOBase_27 = "0x3A00",14848
IOBase_28 = "0x3B00",15104
IOBase_29 = "0x3C00",15360
IOBase_30 = "0x3D00",15616
IOBase_31 = "0x3E00",15872
IOBase_32 = "0x3F00",16128
[FileDependentDlgENG-Elpc575C]
DlgType = "RadioCombination"
DlgTemplate = "Elpc575"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO}
Combo1Label = "I/O Port:"
Combo2Label = "Memory Address:"
Combo3Label = "Interrupt:"
Combo4Label = "Auto Polarity:"
Combo5Label = "Network Link Selection:"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(MemoryAddrList)
Combo2Out = $(MemoryAddrValue)
Combo3List = $(IRQList)
Combo3Out = $(IRQValue)
Combo4List = $(PolarityList)
Combo4Out = $(PolarityValue)
Combo5List = $(LinkList)
Combo5Out = $(LinkValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List, Combo4List, Combo5List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out}
EditTextIn = {"",""}
EditTextLim = {"",""}
[PolarityChoices]
Polarity_1 = "Enabled", 0
Polarity_2 = "Disabled", 32
[LinkChoices]
Link_1 = "Auto Negotiation",512
Link_2 = "100 BT Full Duplex",256
Link_3 = "100 BT Half Duplex",128
Link_4 = "10 BT Full Duplex",64
Link_5 = "10 BT Half Duplex",32
[MemoryAddrChoices]
MA_0 = "Auto", 0
MA_1 = "0xC8000", 819200
MA_2 = "0xC9000", 823296
MA_3 = "0xCA000", 827392
MA_4 = "0xCB000", 831488
MA_5 = "0xCC000", 835584
MA_6 = "0xCD000", 839680
MA_7 = "0xCE000", 843776
MA_8 = "0xCF000", 847872
MA_9 = "0xD0000", 851968
MA_10 = "0xD1000", 856064
MA_11 = "0xD2000", 860160
MA_12 = "0xD3000", 864256
MA_13 = "0xD4000", 868352
MA_14 = "0xD5000", 872448
MA_15 = "0xD6000", 876544
MA_16 = "0xD7000", 880640
MA_17 = "0xD8000", 884736
MA_18 = "0xD9000", 888832
MA_19 = "0xDA000", 892928
MA_20 = "0xDB000", 897024
MA_21 = "0xDC000", 901120
MA_22 = "0xDD000", 905216
MA_23 = "0xDE000", 909312
[IRQChoices]
IRQ_0 = "Auto",0
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "15",15
[IOBaseAddrChoices]
IOBase_0 = "Auto",0
IOBase_1 = "0x1000",4096
IOBase_2 = "0x1100",4352
IOBase_3 = "0x1200",4608
IOBase_4 = "0x1300",4864
IOBase_5 = "0x1400",5120
IOBase_6 = "0x1500",5376
IOBase_7 = "0x1600",5632
IOBase_8 = "0x1700",5888
IOBase_9 = "0x2000",8192
IOBase_10 = "0x2100",8448
IOBase_11 = "0x2200",8704
IOBase_12 = "0x2300",8960
IOBase_13 = "0x2400",9216
IOBase_14 = "0x2500",9472
IOBase_15 = "0x2600",9728
IOBase_16 = "0x2700",9984
IOBase_17 = "0x3000",12288
IOBase_18 = "0x3100",12544
IOBase_19 = "0x3200",12800
IOBase_20 = "0x3300",13056
IOBase_21 = "0x3400",13312
IOBase_22 = "0x3500",13568
IOBase_23 = "0x3600",13824
IOBase_24 = "0x3700",14080
IOBase_25 = "0x3800",14336
IOBase_26 = "0x3900",14592
IOBase_27 = "0x3A00",14848
IOBase_28 = "0x3B00",15104
IOBase_29 = "0x3C00",15360
IOBase_30 = "0x3D00",15616
IOBase_31 = "0x3E00",15872
IOBase_32 = "0x3F00",16128
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.