3Com Corporation
3CCFE574BT 10/100 LAN PC Card
3CXFE574BT 10/100 LAN PC Card
Installing IBM LAN Server 4.0 for DOS
1. Insert the disk labeled
"DOS LAN Services Disk 1"
into your disk drive.
2. Change to that drive and type in "INSTALL"
3. Choose the directory for the software installation.
The default is "C:\NET".
4. A menu will appear that provides a list of Network
Cards. Choose "Network card not shown in the list
below..."
5. Type: a:\ndis2, remove the
DOS LAN Services Disk 1
and insert the Installation disk.
6. The next menu should display "FE574B-3Com 10/100 LAN
PCCard-Fast Ethernet".
7. Additional menus will appear, choose the
options for your network environment.
Refer to the IBM manual if there are
questions regarding these menus.
8. Copy EL3C574.DOS from the Installation disk
to C:\NET.
9. Exclude the CIS memory range for the PC Card
by editing the CONFIG.SYS file.
10. Reboot your notebook.
%VER 1.000.001
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.