;============================================================================= ; OEMSETNT.INF ; ; 3Com Megahertz 10/100 LAN CardBus PC Card Windows NT Setup File ; ; Copyright 1997 3Com Corporation ;============================================================================= ; Revision History ; ; %VER v1.0 ; ; %VER v2.0 12/19/97 Release for 3C656 EtherDisk NDIS3/4 Driver Installation ;============================================================================= [Identification] OptionType = NetAdapter [PlatformsSupported] ;ISA ;EISA ;MCA PCI ;PCMCIA ;"Jazz-Internal Bus" [Options] Elpc656 [OptionsTextENG] Elpc656 = "3Com 10-100 LAN + 56K Modem CardBus PC Card (Ethernet)" [AllFileConstants] GenericInfVersion = " v2.00" UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" TrayIconExe = "comsmd.exe -try" UninstallExe = "un3c656" UnInstallName = "3Com PC Card Diagnostics Utilities" Manufacturer = "3Com" ; TomS DISABLEPCMCIASYS = "0" ;DISABLEPCMCIASYS = "1" [FileConstants-Elpc656] GenericAdapterName = "3Com 10-100 LAN + 56K Modem CardBus PC Card (Ethernet)" GenericDriverName = "3Com 10-100 LAN + 56K Modem CardBus PC Card (Ethernet)" ;ms; GenericSysName = "Elpc656.sys" GenericName = "Elpc656" ProductMajorVersion = "2" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "Elpc656" ProductSoftwareDescription = "3Com 10-100 LAN + 56K Modem CardBus PC Card (Ethernet)" ;ms; ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName) NetRuleSoftwareType = "Elpc656Sys ndisDriver Elpc656Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """Elpc656Sys"" yes no container" NetRuleSoftwareClass = {"Elpc656Driver basic"} NetRuleSoftwareBindable = {"Elpc656Driver Elpc656Adapter non exclusive 100"} ProductHardwareName = "Elpc656" ProductHardwareDescription = "3Com 10-100 LAN + 56K Modem CardBus PC Card (Ethernet)" NetRuleHardwareType = "Elpc656 Elpc656Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"Elpc656Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" VERS1Manufacturer = "3Com" VERS1Product = "Fast EtherLink XL PC Card" VERS1Type = "Elpc656-FastEtherLink" PCMCIA = 0 [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers NT350VersionConstant = "3.50" NT310VersionConstant = "3.10" NT400VersionConstant = "(4.0)" [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) Set !DebugOutputControl = 1 set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms AllFileConstants read-syms FileConstants"-"$(Option) read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms AllFileConstants$(!STF_LANGUAGE) read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt Ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue) CloseRegKey $(KeyNt) Endif ;ms; ;; NT v4.00 has NDIS4 ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) set NDIS_DISK_A = "" set NDIS_VER = NDIS4 set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL656ND7.SYS" else set NDIS_DISK_A = "" set NDIS_VER = NDIS3 set ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EL656ND3.SYS" endif ;ms; ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) Debug-Output "$(InfFile) $(Option): Configureadapter" set Error = "Windows NT v3.10 is not support by this product" goto fatal endif Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set IRQValue = *($(IRQList), 1) ; Milton -- changed from 5 set IOBaseAddrValue = *($(IOBaseAddrList), 1) set MemoryAddrValue = *($(MemoryAddrList), 1) ; Milton -- changed from 9 set DuplexModeValue = *($(DuplexModeList), 1) Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif ;ms; Set FileToCheck = $($R1)\OEMSETUP.INF LibraryProcedure FilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck) Ifstr(i) $(FilePresent) != "YES" Goto installadapter Endif ;ms; Set SrcDir = $($R1) install "Install-Dll" Debug-Output "Install-tnicdiag" install "Install-tnicdiag" StartWait ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) Debug-Output "$(InfFile) $(Option): Windows NT 4.00" ; TomS ;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt ;set TrayIconList = {COMSMDEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)} ;SetRegValue $(KeyNt) $(TrayIconList) ;Debug-Output "Install-TraynCpl" ;install "Install-TrayAndCpl" ;CloseRegKey $(KeyNt) ;RunProgram ExitCode "Windows Directory" "" COMSMD.EXE "-setup" ; TomS ; TomS ;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" $(!REG_KEY_ALL_ACCESS) KeyNt ;ifstr $(KeyNt) == "" ; CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt ;endif ;OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2 ;ifstr $(KeyNt2) == "" ; CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt2 ;endif ;set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com PC Card Diagnostics"},+ ; {UninstallString, $(NoTitle), $(!REG_VT_SZ), "UN3C656.EXE"}} ;Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList) ;ifint $($ShellCode) != $(!SHELL_CODE_OK) ; goto ShellCodeError ;endif ;CloseRegKey $(KeyNt) ;CloseRegKey $(KeyNt2) endif EndWait goto adaptersetup configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress" set MemoryAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "DuplexMode" set DuplexModeIndex = $(ValueData) else-ifstr(i) $(ValueName) == "SocketNumber" set SocketNumberIndex = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueIndex = $(ValueData) ; TomS else-ifstr(i) $(ValueName) == "AdapterName" set OldAdapterName = $(ValueData) ;TomS endif EndForListDo set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex))) ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQList), 2) endif set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex))) ifstr(i) $(MemoryAddrValue) == "" set MemoryAddrValue = *($(MemoryAddrValues), 21) endif set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif set DuplexModeValue = *($(DuplexModeList), ~($(DuplexModeValues),$(DuplexModeIndex))) ifstr(i) $(DuplexModeValue) == "" set DuplexModeValue = *($(DuplexModeList), 1) endif adaptersetup = + LoadLibrary "disk 1" $(DialogDllName) hLib read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option) set ENABLER = 0 ui start "InputDlg" $(hLib) set ExitButton = $(ButtonPressed) FreeLibrary $(hLib) ifstr(i) $(DLGEVENT) == "CONTINUE" set IOBaseAddrIndex = $(Combo1Out) set MemoryAddrIndex = $(Combo2Out) set IRQValueIndex = $(Combo3Out) set DuplexModeIndex = $(Combo4Out) set ExitButton = $(ButtonPressed) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else set CommonStatus = STATUS_USERCANCEL ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + set BusTypeNum = 1 ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; TomS ;set MemoryAddrValue = 0 set MemoryAddrValue = *($(MemoryAddrValues),~($(MemoryAddrList), $(MemoryAddrIndex))) ; TomS set IRQValue = *($(IRQValues),~($(IRQList), $(IRQValueIndex))) set IOBaseAddrValue = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex))) set DuplexModeValue = *($(DuplexModeValues), ~($(DuplexModeList), $(DuplexModeIndex))) ; TomS ifstr $(OldAdapterName) == "" set OldAdapterName = $(ProductHardwareName)$(AdpaterNumber) endif ; TomsS set NewValueList = {{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {IoLength, $(NoTitle),$(!REG_VT_DWORD), 127},+ {MemoryMappedBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+ {MemoryMappedSize, $(NoTitle),$(!REG_VT_DWORD),4096},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+ {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+ {DuplexMode, $(NoTitle),$(!REG_VT_DWORD),$(DuplexModeValue)},+ {SocketNumber, $(NoTitle),$(!REG_VT_DWORD),$(SocketValue)},+ {TransmitBufferSize, $(NoTitle),$(!REG_VT_DWORD),7168},+ {AdapterType, $(NoTitle),$(!REG_VT_DWORD),0},+ {DriverMode, $(NoTitle),$(!REG_VT_DWORD),1},+ {OSType, $(NoTitle),$(!REG_VT_DWORD),1},+ ; TomS ; {PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0}} {AdapterName, $(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)$(AdapterNumber)},+ {SoftexPcmcia, $(NoTitle),$(!REG_VT_DWORD),1}} ; TomS Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ifint $(DISABLEPCMCIASYS) == 1 set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4} CloseRegKey $(PCMCIAKey) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif ifint $(DISABLEPCMCIASYS) == 1 set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0} CloseRegKey $(PCMCIAKey) endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) Debug-Output "$(InfFile) $(Option): Windows NT 4.00 remove icon" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = COMSMDEXE DeleteRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) endif RunProgram ExitCode "Windows Directory" "" UN3C656.EXE "-inf" goto end UpgradeSoftware = + ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) else goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) else goto fatalregistry endif endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMSETUP.INF" return [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" ;;??AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir)$(NDIS_DISK_A) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURSEOLDER" ;TomS AddSectionFilesToCopyList Files-tnicdiag $(SrcDir) $(!STF_WINDOWSSYSPATH) ; AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH) ; TomS ;;?? AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir)$(NDIS_DISK_A) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-tnicdiag] ; TomS ; set STF_VITAL = "" AddSectionFilesToCopyList Files-tnicdiag $(SrcDir) $(!STF_WINDOWSSYSPATH) ; AddSectionFilesToCopyList Files-HwDll $(SrcDir)WINNT $(!STF_WINDOWSSYSPATH) ; set !STF_NCPA_FLUSH_COPYLIST = TRUE ; CopyFilesInCopyList ;TomS Exit [Install-TrayAndCpl] ; TomS ; set STF_VITAL = "" ; AddSectionFilesToCopyList Files-TrayAndCpl $(SrcDir) $(!STF_WINDOWSSYSPATH) ; set !STF_NCPA_FLUSH_COPYLIST = TRUE ; CopyFilesInCopyList ; TomS Exit [Source Media Descriptions] 1 = "Windows NT Setup Disk #1" 2 = "3Com Megahertz 10/100 LAN CardBus PC Card Installation Disk (Ethernet)" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 2, OEMSETUP.INF, SIZE=58000, RENAME=$(!UG_Filename) [Files-Dll] 2, Elpc656.DLL, SIZE=21000 [Files-tnicdiag] ;2,tnicdiag.exe, SIZE=165504 ;2,tnicdiag.hlp, SIZE=20877 ;2,tvaraddr.txt, SIZE=113 2,un3c656.exe, SIZE=208000 [Files-HwDll] ;2,hwaccess.dll, SIZE=20198 ;2,pcomdrv.sys, SIZE=5000 ;2,tc656cfg.dll, SIZE=59458 [Files-TrayAndCpl] ;2,comsmd.exe, SIZE=8957 [Files-NDIS4] 2,EL656ND7.SYS , SIZE=90000 [Files-NDIS3] ;2,EL656ND3.SYS , SIZE=60000 [LanguagesSupported] ENG [AllFileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" DialogDllName = "Elpc656.DLL" [FileConstantsENG-Elpc656] FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion) ProductSoftwareTitle = $(GenericDriverName) ProductHardwareTitle = $(GenericAdapterName) IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) InterruptStyleValues = ^(InterruptStyleChoices, 2) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) MemoryAddrList = ^(MemoryAddrChoices,1) MemoryAddrValues = ^(MemoryAddrChoices,2) DuplexModeList = ^(DuplexModeChoices, 1) DuplexModeValues = ^(DuplexModeChoices, 2) [DialogConstantsENG-Elpc656] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG-Elpc656] DlgType = "RadioCombination" DlgTemplate = "Elpc656" Caption = $(FunctionTitle) HelpContext = $(!IDH_DB_OEMNADE2_INS) CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO} Combo1Label = "I/O Port:" Combo2Label = "Memory Address:" Combo3Label = "Interrupt:" Combo4Label = "DuplexMode" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrValue) Combo2List = $(MemoryAddrList) Combo2Out = $(MemoryAddrValue) Combo3List = $(IRQList) Combo3Out = $(IRQValue) Combo4List = $(DuplexModeList) Combo4Out = $(DuplexModeValue) ComboListItemsIn = {Combo1List,Combo2List,Combo3List, Combo4List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out} EditTextIn = {"",""} EditTextLim = {"",""} [MemoryAddrChoices] MA_0 = "AUTO" , 0 MA_1 = "0xC8000", 819200 MA_2 = "0xC9000", 823296 MA_3 = "0xCA000", 827392 MA_4 = "0xCB000", 831488 MA_5 = "0xCC000", 835584 MA_6 = "0xCD000", 839680 MA_7 = "0xCE000", 843776 MA_8 = "0xCF000", 847872 MA_9 = "0xD0000", 851968 MA_10 = "0xD1000", 856064 MA_11 = "0xD2000", 860160 MA_12 = "0xD3000", 864256 MA_13 = "0xD4000", 868352 MA_14 = "0xD5000", 872448 MA_15 = "0xD6000", 876544 MA_16 = "0xD7000", 880640 MA_17 = "0xD8000", 884736 MA_18 = "0xD9000", 888832 MA_19 = "0xDA000", 892928 MA_20 = "0xDB000", 897024 MA_21 = "0xDC000", 901120 MA_22 = "0xDD000", 905216 MA_23 = "0xDE000", 909312 [IRQChoices] IRQ_0 = "10",10 ;IRQ_0 = "AUTO",0 ;IRQ_1 = "3",3 ;IRQ_2 = "4",4 ;IRQ_3 = "5",5 ;IRQ_4 = "7",7 ;IRQ_5 = "9",9 ;IRQ_6 = "10",10 ;IRQ_7 = "11",11 ;IRQ_8 = "15",15 [IOBaseAddrChoices] IOBase_0 = "AUTO",0 IOBase_1 = "0x3000",12288 IOBase_2 = "0x3100",12544 IOBase_3 = "0x3200",12800 IOBase_4 = "0x3300",13056 IOBase_5 = "0x3400",13312 IOBase_6 = "0x3500",13568 IOBase_7 = "0x3600",13824 IOBase_8 = "0x3700",14080 IOBase_9 = "0x3800",14336 IOBase_10 = "0x3900",14592 IOBase_11 = "0x3A00",14848 IOBase_12 = "0x3B00",15104 IOBase_13 = "0x3C00",15360 IOBase_14 = "0x3D00",15616 IOBase_15 = "0x3E00",15872 IOBase_16 = "0x3F00",16128 [DuplexModeChoices] DuplexMode_0 = "AutoSelect",0 DuplexMode_1 = "FullDuplex",1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.