;**************************************************************
;* File: oemsetup.inf
;* (c) 1993-1997 Softex, Inc. All Rights Reserved
;* This file contains licensed material from Softex.
;* Unauthorized use of code from this file may be a
;* violation of the licensing agreement.
;**************************************************************/
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCMCIA
"Jazz-Internal Bus"
[Options]
IBMTOK
[GeneralConstants]
from = ""
to = ""
retaddr = ""
KeyNull = ""
StringNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
SpeedList = {16,4}
Manufacturer = "Microsoft"
ProductMajorVersion = "4"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "IbmTok"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ibmtokd.sys"
NetRuleSoftwareType = "ibmtokSys ndisDriver ibmtokDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """IBMTokSys"" yes no container"
NetRuleSoftwareClass = {"ibmtokDriver basic"}
ProductHardwareName = "IbmTok"
NetRuleHardwareType = "ibmtok ibmtokAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"ibmtokAdapter basic"}
ProductOpSupport = 134
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
Combo1TextList = ^(Combo1Choices, 1)
Combo1ValueList = ^(Combo1Choices, 2)
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
shell "" DebugControl
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
shell "" DebugControl
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
shell "" DebugControl
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Debug-Output "OEMNADTK.INF: STF_CWDIR is: "$(!STF_CWDIR)
set-subst LF = "\n"
read-syms GeneralConstants
Debug-Output "nishi"
read-syms FileConstants
Shell $(UtilityInf), GetBindingInfo, "IBM"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set NetRuleSoftwareBindable = $($R1)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set ActivateDetection = TRUE
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the IBM software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
set ActivateDetection = TRUE
endif
set IOBaseAddress = 1
Debug-Output "OEMNADTK.INF: =================================================="
Debug-Output "OEMNADTK.INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "OEMNADTK.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "OEMNADTK.INF: Option is: "$(Option)
Debug-Output "OEMNADTK.INF: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "OEMNADTK.INF: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "OEMNADTK.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "OEMNADTK.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "OEMNADTK.INF: =================================================="
Set DetectedCard = FALSE
set CardType = 1
set Pcmcia = FALSE
Ifstr(i) $(ActivateDetection) != TRUE
Goto skipdetection
Endif
Set TypeList = {{IOADDR, IOADDR_Addr_List, IOBaseAddress},+
{IRQ, IRQList, Token1IRQVal},+
{MEMADDR, MMIODecList, Token1MMIOVal}}
Debug-Output "OEMNADTK.INF: Calling Param_BuildTypeLists"
Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
Set Status = $($R0)
ifstr(i) $(Status) != STATUS_SUCCESSFUL
Goto fataldetect
Endif
Debug-Output "OEMNADTK.INF: Calling Param_SetDefaults"
Shell $(ParamInf) Param_SetDefaults {}
set Token1IRQVal = 0;
set Token1MMIOVal = 0;
Shell $(ParamInf) HexListFromDecList $(MMIODecList)
Set MMIOList = $($R0)
Shell $(UtilityInf) SortList $(SpeedList) TRUE FALSE
Set Combo1List = $($R0)
Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
Set Combo2List = $($R0)
Shell $(UtilityInf) SortList $(MMIOList) TRUE FALSE
Set Combo3List = $($R0)
shell "" DebugControl
Ifstr(i) $(!STF_NCDETECT) == YES
Debug-Output "NISHI 21"
Ifstr(i) $(!STF_NCOPTION) == $(Option)
Debug-Output "NISHI 20"
Set DetectedCard = TRUE
Debug-Output "OEMNADTK.INF: Setting DetectedCard to TRUE"
Endif
Endif
Debug-Output "NISHI 1"
skipdetection =+
set from = $(fatal)
set to = $(fatal)
Debug-Output "NISHI 2"
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
Debug-Output "NISHI 3"
Ifstr(i) $(DetectedCard) != TRUE
Debug-Output "NISHI 22"
Goto adaptersetup
Endif
StartWait
Debug-Output "NISHI 4"
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
EndWait
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto adaptersetup
Endif
Debug-Output "NISHI 5"
Set DetectedParams = $($R1)
Debug-Output "OEMNADTK.INF: Calling Param_SetDefaults to merge detected params"
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
goto adapteroptions
configureadapter = +
Debug-Output "NISHI 6"
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "OEMNADTK.INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADTK.INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "OEMNADTK.INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = "CANNOT_FIND_COMPONENT_SERVICE"
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE )
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "IOBaseAddress"
set IOBaseAddress = $(ValueData)
else-Ifstr(i) $(ValueName) == "NetworkAddress"
set NetworkAddress = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set Token1IRQVal = $(ValueData)
else-ifstr(i) $(ValueName) == "RingSpeed"
set Token1Speed = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set Token1MMIOVal = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress_1"
set Token1RAM = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedSize"
set Token1MMIOSize = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedSize_1"
set Token1RAMSize = $(ValueData)
else-ifstr(i) $(ValueName) == "Pcmcia"
set Pcmcia = $(ValueData)
endif
EndForListDo
Debug-Output "NISHI 15"
adaptersetup =+
Debug-Output "NISHI 7"
Shell $(ParamInf) Param_ParameterConfidence
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "OEMNADTK.INF: parameter confidence too low to bypass configuration"
Goto adapteroptions
Endif
Ifstr(i) $(DetectedCard) == TRUE
Debug-Output "NISHI 8"
Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
set BusInterfaceType = *($(!STF_NCDETINFO),5)
set BusNumber = *($(!STF_NCDETINFO),6)
Goto adapterverify
Endif
Endif
goto adapteroptions
adapteroptions = +
set from = adapteroptions
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto adapterverify
endif
ifstr(i) $(!STF_NCDETINFO) == {}
Debug-Output "NISHI 8"
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardwareDescription) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
else
Debug-Output "NISHI 9"
set BusInterfaceType = *($(!STF_NCDETINFO),5)
set BusNumber = *($(!STF_NCDETINFO),6)
endif
set Pcmcia = 0
ifstr(i) $(BusInterfaceType) == 8
Debug-Output "NISHI 10"
set Combo1DlgValue = *($(Combo1TextList),+
~($(Combo1ValueList), +
$(IOBaseAddress)))
read-syms FileDependentPCMCIADlg$(!STF_LANGUAGE)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOBaseAddress = *($(Combo1ValueList),+
~($(Combo1TextList),+
$(Combo1Out)))
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set Pcmcia = 1
set Token1MMIOSize = 8192
set Token1RAMSize = 16384
Set NewList = {Auto}
ForListDo $(IRQList)
Set NewList = >($(NewList),$($))
EndForListDo
Set IRQList = {}
ForListDo $(NewList)
Set IRQList = >($(IRQList),$($))
EndForListDo
Set NewList = {0}
ForListDo $(MMIODecList)
Set NewList = >($(NewList),$($))
EndForListDo
Set MMIODecList = {}
ForListDo $(NewList)
Set MMIODecList = >($(MMIODecList),$($))
EndForListDo
Set NewList = {Auto}
ForListDo $(MMIOList)
Set NewList = >($(NewList),$($))
EndForListDo
Set MMIOList = {}
ForListDo $(NewList)
Set MMIOList = >($(MMIOList),$($))
EndForListDo
read-syms SecondPCMCIADlg$(!STF_LANGUAGE)
ifstr(i) $(Token1IRQVal) == ""
set Token1IRQVal = *($(IRQList), 1)
endif
ifstr(i) $(Token1MMIO) == ""
set Token1MMIO = *($(MMIOList), 1)
endif
ifstr(i) $(Token1Speed) == ""
set Token1Speed = *($(SpeedList), 1)
endif
set Token1MMIO = *($(MMIOList), ~($(MMIODecList),+
$(Token1MMIOVal)))
set Combo1Out = $(Token1Speed)
set Combo2Out = $(Token1IRQVal)
set Combo3Out = $(Token1MMIO)
ui start "Config"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set Token1Speed = $(Combo1Out)
set Token1IRQVal = $(Combo2Out)
set Token1MMIO = $(Combo3Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set Token1MMIOVal = *($(MMIODecList), ~($(MMIOList),+
$(Token1MMIO)))
ifstr(i) $(Token1MMIOVal) == 0
Set Token1RAM = 0
else
Set-add Token1RAM = $(Token1MMIOVal),8192
endif
else
Debug-Output "NISHI 11"
ifstr(i) $(IOBaseAddress) == 2592
set IOBaseAddress = 1
else-ifstr(i) $(IOBaseAddress) == 2596
set IOBaseAddress = 2
else-ifstr(i) $(IOBaseAddress) == ""
set IOBaseAddress = 1
endif
set RadioIn = {$(IOBaseAddress)}
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOBaseAddress = *($(RadioOut),1)
set NetworkAddress = *($(EditTextOut),1)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
;; NG
Set NewList = {Auto}
ForListDo $(IRQList)
Set NewList = >($(NewList),$($))
EndForListDo
Set IRQList = {}
ForListDo $(NewList)
Set IRQList = >($(IRQList),$($))
EndForListDo
;;NG
set Token1MMIOSize = 8192
set Token1RAMSize = 16384
;;set Token1IRQVal = 10
read-syms SecondDlg$(!STF_LANGUAGE)
ifstr(i) $(Token1IRQVal) == ""
set Token1IRQVal = *($(IRQList), 1)
endif
ifstr(i) $(Token1MMIO) == ""
set Token1MMIO = *($(MMIOList), 1)
endif
ifstr(i) $(Token1Speed) == ""
set Token1Speed = *($(SpeedList), 1)
endif
set Token1MMIO = *($(MMIOList), ~($(MMIODecList),+
$(Token1MMIOVal)))
set Combo1Out = $(Token1Speed)
set Combo2Out = $(Token1IRQVal)
set Combo3Out = $(Token1MMIO)
ui start "Config"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set Token1Speed = $(Combo1Out)
set Token1IRQVal = $(Combo2Out)
set Token1MMIO = $(Combo3Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set Token1MMIOVal = *($(MMIODecList), ~($(MMIOList),+
$(Token1MMIO)))
ifstr(i) $(Token1MMIOVal) == 0
Set Token1RAM = 0
else
Set-add Token1RAM = $(Token1MMIOVal),8192
endif
Debug-Output "NISHI 12"
endif
adapterverify =+
Ifstr(i) $(DetectedCard) != TRUE
Goto skipoptions
Endif
Debug-Output "OEMNADTK.INF: Calling Param_VerifyCard"
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
Debug-Output "OEMNADTK.INF: Param_VerifyCard succeeded"
Goto skipoptions
Endif
Set from = adapteroptions
Set to = skipoptions
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto Warning
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
ifstr(i) $(BusInterfaceType) == 8
set NewValueList = {{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddress)},+
{IoLength,$(NoTitle),$(!REG_VT_DWORD),7},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{SoftexDock,$(NoTitle),$(!REG_VT_DWORD),1},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),1},+
{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(Token1IRQVal)},+
{RingSpeed,$(NoTitle),$(!REG_VT_DWORD),$(Token1Speed)},+
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(Token1MMIOVal)},+
{MemoryMappedBaseAddress_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAM)},+
{PCCardMemoryWindowOffset,$(NoTitle),$(!REG_VT_DWORD),$(Token1MMIOVal)},+
{PCCardMemoryWindowOffset_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAM)},+
{MemoryMappedSize,$(NoTitle),$(!REG_VT_DWORD),$(Token1MMIOSize)},+
{MemoryMappedSize_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAMSize)},+
{RingSpeed,$(NoTitle),$(!REG_VT_DWORD),$(Token1Speed)}}
;nishi
; {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),$(Pcmcia)}}
else
set Token1MMIOVal = 901120
set Token1RAM = 917504
set Token1RAMSize = 16384
set NewValueList = {{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddress)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),2},+
{SoftexDock,$(NoTitle),$(!REG_VT_DWORD),1},+
{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(Token1IRQVal)},+
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(Token1MMIOVal)},+
{MemoryMappedBaseAddress_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAM)},+
{MemoryMappedSize_1,$(NoTitle),$(!REG_VT_DWORD),$(Token1RAMSize)}}
endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyParameters)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
set iSearch = 1
nextnetcard = +
Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName), $(iSearch)
set KeyNetcard = $($R0)
set iSearch = $($R1)
Debug-Output "OemNadEp.Inf: FindNextNetworkCard "$(KeyNetcard)","$(iSearch)
Ifstr $(KeyNetcard) != $(KeyNull)
Debug-Output "OemNadEp.Inf: Setting OperationsSupport value"
SetRegValue $(KeyNetcard) {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)}
CloseRegKey $(KeyNetcard)
goto nextnetcard
Endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
exit
[DebugControl]
set !DebugOutPutControl = 1
return
[Source Media Descriptions]
1 = "Softex PC Card Client Drivers Disk"
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-IBMTok]
1,IBMTOKD.SYS , SIZE=999
[LanguagesSupported]
ENG
[OptionsTextENG]
IBMTOK = "IBM Token Ring (ISA/PCMCIA) Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "IBM Token Ring Adapter Card Setup"
FunctionTitle1 = "IBM Token Ring PCMCIA Adapter Card Setup"
ProductSoftwareDescription = "IBM Token Ring (ISA/PCMCIA) Adapter Driver"
ProductHardwareDescription = "IBM Token Ring (ISA/PCMCIA) Adapter"
ProductSoftwareTitle = "IBM Token Ring Adapter (ISA/PCMCIA) Driver"
ProductHardwareTitle = "IBM Token Ring (ISA/PCMCIA) Adapter"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Group1 = "I/O Port Base Address"
Radio1 = "&Primary"
Radio2 = "&Secondary"
Edit1Label = "&Network Address:"
DlgType = "RadioCombination"
DlgTemplate = "IBM_TOKEN"
Caption = $(FunctionTitle)
ComboListItemsIn = {}
ComboListItemsOut = {}
EditTextLim = 17
EditTextIn = $(NetworkAddress)
OptionsGreyed = {}
HelpContext = $(!IDH_DB_OEMNADTK_INS)
RCCtlFocusOn = 403
[FileDependentPCMCIADlgENG]
Label1 = "I/O Port Address:"
DlgType = Combination
DlgTemplate = "SINGLE_COMBO"
Caption = $(FunctionTitle)
Combo1List = $(Combo1TextList)
Combo1Out = $(Combo1DlgValue)
RadioIn = {}
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
OptionsGreyed = {}
HelpContext = $(!IDH_DB_OEMNADTK_INS)
RCCtlFocusOn = 403
[SecondPCMCIADlgENG]
Group1 = "Network Speed"
HelpContext = 1
Caption = $(FunctionTitle1)
Combo1Label = "Network &Speed:"
Combo2Label = "Card &IRQ Level:"
Combo3Label = "Memory &Base:"
Combo1List = $(SpeedList)
Combo1Out = $(Token1Speed)
Combo2List = $(IRQList)
Combo2Out = $(Token1IRQVal)
Combo3List = $(MMIOList)
Combo3Out = $(Token1MMIO)
DlgType = Combination
DlgTemplate = "WD"
ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
CBOptionsGreyed = {}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}
HelpContext = 1
[SecondDlgENG]
Caption = $(FunctionTitle)
Label1 = "Network &Speed:"
Label2 = "Card &IRQ Level:"
Combo1List = $(SpeedList)
Combo1Out = $(Token1Speed)
Combo2List = $(IRQList)
Combo2Out = $(Token1IRQVal)
DlgType = "RadioCombination"
DlgTemplate = "NE2000"
ComboListItemsIn = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
CBOptionsGreyed = {}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADN2_INS)
[Combo1Choices]
Combo1_1 = "Auto", 0
Combo1_2 = "Primary", 2592
Combo1_3 = "Second", 2596
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.