1. pnpenet.zip Driver
2. README File Contents

README Driver File Contents (pnpenet.zip)

****************************************************************************
*									   *
*			 Plug & Play Ethernet Card			   *
*									   *
*		 ODI Driver for NetWare 3.12/4.0x Servers		   *
*									   *
*			       README file				   *
*									   *
****************************************************************************

1. Introduction

   This Ethernet ODI driver for NetWare 3.1x/4.0x Server conforms to Novell
   NetWare 386 Public Domain Open Data-Link Interface (ODI), a specification
   that is jointly designed by Novell and Apple.  It applies to the NetWare
   3.12/4.0x servers.


2. Contents of the Subdirectory

      PNPSRV.LAN       NetWare 3.12/4.0x ODI Server Driver for the PNP
		       Ethernet Card.

      MSM.NLM	       Novell Generic Media Support Module for NetWare
		       Server 4.0x for the PNP Ethernet Card.

      ETHERTSM.NLM     Novell Generic Media Support Module for NetWare
		       Server 3.12 for the PNP Ethernet Card.

      MSM31X.NLM       Novell Generic Media Support Module for NetWare
		       Server 3.12 for the PNP Ethernet Card.

      LSLENH.NLM       Novell Generic Media Support Module for NetWare
		       Server 3.11 for the PNP Ethernet Card.

      MONITOR.NLM      Novell Generic Media Support Module for NetWare
		       Server 3.11 for the PNP Ethernet Card.

      PATCHMAN.NLM     Novell Generic Media Support Module for NetWare
		       Server 3.11 for the PNP Ethernet Card.


3. Installation


   1) Install and configure the PNP Ethernet card on your PC system
      following the procedure in your PNP Ethernet installation manual.

   2) Install NetWare v3.12/v4.0x Server according to the manual.

   3) Insert the Ethernet Driver Disk to any floppy drive, for example,
      A:.

   4) Under the directory where the server files exist, type "SERVER" to
      start up the server.

   5) Type as folls to Load MSM31X.NLM from the Ethernet Driver Disk if
      you are using NetWare Server 3.1x.

	    LOAD A:MSM31X.NLM (for NetWare 3.1x)

      Or, type as follows to load MSM.NLM if you are using NetWare Server
      4.0x.

	    LOAD A:MSM.NLM (for NetWare 4.0x)

   6) On the server console, load PNPSRV.LAN.  You may specify the frame
      type.  For example:

	    LOAD A:PNPSRV.LAN FRAME=Ethernet_802.2

   7) Bind IPX to PNPSRV by typing the following command:

	    BIND IPX to PNPSRV

   8) If you want to load PNPSRV.LAN from the hard disk directly in the
      future, set up a workstation to connect to this server, then copy
      PNPSRV.LAN from the Ethernet Driver Disk to the directory SYS:\SYSTEM
      on the server.



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.