1. dsc350_winxp_driver_121201.exe Driver
2. Ca500ai.inf File Contents

Ca500ai.inf Driver File Contents (dsc350_winxp_driver_121201.exe)

; CA500A.INF  --        This file contains installation information 
;                       for the composite A/V device of the 
;                       D-Link DSC-350.
;               	It is using the default installer.
;
; *** revised 01-04-2001: 
; D-Link DSC-350 version 1.3.2.0
;

[Version]
Signature="$CHICAGO$"
Class=USB
ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
provider=%D-Link%
LayoutFile=LAYOUT.INF
DriverVer=02/16/2000

[ControlFlags]
; All PnP devices should be excluded from manual AddDevice Applet list
;ExcludeFromSelect=*

[Manufacturer]
%MfgName%=D-Link

[D-Link]
%CA500AI.DeviceDesc%=CA500AI.Dev,USB\VID_084d&PID_0003&MI_01
%USB\VID_084d&PID_0003.DeviceDesc%=StandardHub.Dev,USB\VID_084d&PID_0003

[DestinationDirs]
CA500AI.Files.Ext=10,System32\Drivers
CA500AI.Files.Inf=10,INF

[CA500AI.Dev]
CopyFiles=CA500AI.Files.Ext
AddReg=CA500AI.AddReg

[CA500AI.Dev.NT]
CopyFiles=CA500AI.Files.Ext
AddReg=CA500AI.AddReg

[CA500AI.Dev.Services]
Addservice = CA500AI,0x00000002,CA500AI.AddService

[CA500AI.Dev.NT.Services]
Addservice = CA500AI,0x00000002,CA500AI.AddService

[CA500AI.AddService]
DisplayName    = %CA500AI.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\System32\Drivers\MinBULK.sys
LoadOrderGroup = Base

[CA500AI.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,MinBULK.sys
HKLM,"System\Currentcontrolset\Services\MinBulk\Parameters","MaximumTransferSize",0x10001,4096
HKLM,"System\Currentcontrolset\Services\MinBulk\Parameters","DebugLevel",0x10001,2

;[SourceDisksNames]
;1="DSC-350 Drivers Installation Disk","",1 

;[SourceDisksFiles]
;MinBULK.sys = 1,,,,,

[CA500AI.Files.Ext]
;MinBULK.sys

[CA500AI.Files.Inf]
;Ca500ai.inf

; --------------------------------------------------------------

[StandardHub.Dev]
AddReg=Hub.AddReg
CopyFiles=Hub.CopyFiles

[StandardHub.Dev.NT]
CopyFiles=Hub.CopyFiles.NT

[StandardHub.Dev.NT.Services]
AddService = usbhub, 0x00000002, StandardHub.AddService

[StandardHub.AddService]
DisplayName    = %StandardHub.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 2                  ; SERVICE_AUTO_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\usbhub.sys
LoadOrderGroup = Base

; =================== Global ==================================

[HUB.AddReg]
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,usbhub.sys

[HUB.CopyFiles]

[USB.CopyFiles.NT]

[ControlFlags]


;---------------------------------------------------------------;

[Strings]
D-Link="D-Link"
MfgName="D-Link"
CA500AI.DeviceDesc="D-Link, WDM Still Image Capture"
CA500AI.SvcDesc="D-Link, WDM Still Image Capture, Version 1.00"
USBClassName="Universal serial bus controller"
USB\VID_084d&PID_0003.DeviceDesc="D-Link, Dual Mode Camera"