==================================================================
NOTES ON
Installing IC-Card+ Ethernet PC Card
For WinSock Users
==================================================================
(c) 1997 Copyright ALL RIGHTS RESERVED
This document contains installation notes, which is not included in the
IC-Card+ Ethernet PC Card USER'S GUIDE or onscreen instructions,
for WinSock users regarding IC-Card+ PC Card installation.
This document contains information on the following topics:
1.0 Introduction
2.0 Installation Notes
___________________________________________________________________
1.0 Introduction
----------------
WinSock users please also refer to the following:
-------------------------------------------------------------------
File Description/Installation notes
-------------------------------------------------------------------
README.TXT For all users
\PKTDRV\README.TXT For all Packet driver users
2.0 Installation Notes
------------------------
There are two steps involved in installing the Packet driver:
Step 1
There are two methods to load Packet driver :
Method 1
In your CONFIG.SYS file, include the DEVICE command.
Format:
DEVICE = ICARDP.SYS [/option] <packet_int_no>
Method 2
Issue ICARDP command at the DOS command prompt.
Format:
ICARDP.COM [/option] <packet_int_no>
Please refer to the \PKTDRV\README.TXT file, on DISK,
for more information.
Step 2
To Configure Your Local Copy of Windows 3.1 in order to access to
Network:
Firstly you need to download WINPKT.COM from your Internet
file server sites.
Issue WINPKT command at the DOS command prompt.
Format:
WINPKT <packet_int_no>
The "<packet_int_no>" is software interrupt number used
by packet driver.
This number must be the same as driver's parameters.
After starting winsock in Windows environment,
just set correct the "Packet Vector" value.
Winsock associated programs can be ready to used.
See also winsock distributions, INSTALL.DOC file.
Examples:
> ICARDP.COM 0x62
> WINPKT 0x62
Run Windows, winsock applications.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.