================================================================
NOTES ON
Installing IC-Card+ Ethernet PC Card
For Lantastic 5.0 & 6.0 AI Users
==================================================================
(c) 1997 Copyright ALL RIGHTS RESERVED
This document contains installation notes, which is not included in the
IC-Card+ Ethernet PC Card USER'S GUIDE or onscreen instructions,
for Lantastic 5.0 & 6.0 AI users regarding IC-Card+ PC Card installation.
NOTE:
The ICARDP.DOS driver mentioned in this document is an NDIS driver
provided by Vendor.
The AEXNDIS.DOS driver mentioned in this document is an NDIS driver
provided by ARTISOFT.
This document contains information on the following topics:
1.0 Introduction
2.0 Installation Notes
___________________________________________________________________
1.0 Introduction
----------------
Lantastic 5.0 & 6.0 AI users please also refer to the following:
-------------------------------------------------------------------
File Description
--------------------------------------------------------------------
README.TXT Overall installation notes for all users
2.0 Installation Notes
----------------------
2.1 For Lantastic 5.0 Users
----------------------------
2.1.1 For NDIS driver User
---------------------------
Please replace the driver AEXNDIS.DOS with the ICARDP.DOS driver
in the CONFIG.SYS file.
*** Example CONFIG.SYS file ***
-------------------------------------------------------------
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
DEVICE=C:\LANTASTI\ICARDP.DOS
*** Example STARTNET.BAT file ***
-------------------------------------------------------------
C:\LANTASTI\AI-NDIS BIND_TO=ICARDP_NIF
C:\LANTASTI\AILANBIO
C:\LANTASTI\REDIR Machine Name
*** Example PROTOCOL.INI file ***
-------------------------------------------------------------
[AEXNDIS_NIF]
DRIVERNAME = AEXNDIS$
[ICARDP_NIF]
DRIVERNAME = ICARDP$
Important Notes:
For PROTMAN.DOS V1.x Users
Please also include the NO_BIND option in the AI-NDIS command line
in your STARTNET.BAT file, and run NETBIND.EXE V1.x before
AILANBIO.EXE.
2.2 For Lantastic 6.0 Users
----------------------------
2.2.1 For NDIS driver User
---------------------------
1. Run Lantastic 6.0 install program, and select
"NDIS support for network adapters"
2. Type the IC-Card+ NDIS driver path:
EX:
"C:\LANTASTI.DRV".
The install program will search "ICARDP.DOS" and "PROTOCOL.INI"
and copy these two files to the target directory.
3. Restart Computer.
Note:
If you have already installed Lantastic 6.0 and want to install
IC-Card+ Ethernet PC Card, please replace the driver
AEXNDIS.DOS with the ICARDP.DOS driver in the CONFIG.SYS file.
*** Example CONFIG.SYS file ***
------------------------------------------------------
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
DEVICE=C:\LANTASTI\ICARDP.DOS
*** Example STARTNET.BAT file ***
--------------------------------------------------------
@echo ===== Begin Lantastic configuration =====
SET LAN_CFG=C:\LANTASTI
PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
rem Please get the NETBEUI.EXE program from Microsoft NETBEUI
NETBEUI
AI-NDIS BIND_TO=ICARDP_NIF
AILANBIO @STARTNET.CFG
REDIR LANTA @STARTNET.CFG
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\LANTA
@echo ===== End LANtastic configuration =====
*** Example PROTOCOL.INI file ***
-------------------------------------------------------------
[NETBEUI_XIF]
DriverName = netbeui$
Sessions = 6
NCBS = 12
Bindings = ICARDP_NIF
LANABASE = 1
[ICARDP_NIF]
DRIVERNAME = ICARDP$
2.2.2 For ODI DOS driver User
-------------------------------
The ODI for DOS driver, support "ICARDP.COM" driver for
IC-Card+ PC Card. You can use "ICARDP.COM" driver to
replace NRODI.COM which is the ODI for DOS driver offered by
ARTISOFT.
Note: Because ICARDP.COM following HSM v4.0 spec, please
save LSL.COM, IPXODI.COM that was originally supported by
Lantastic. Copy both release driver diskette's LSL.COM,
IPXODI.COM to C:\LANTASTI.
*** Example STARTNET.BAT file ***
-------------------------------------------------------------
@echo ===== Begin Lantastic configuration =====
SET LAN_CFG=C:\LANTASTI
PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
SET NWDBPATH=C:\Lantasti\NW
LSL --> Please use release driver diskette
NRODI --> please replace with ICARDP
ODINSUP
IPXODI --> Please use release driver diskette
AI-NDIS BIND_TO=ICARDP
AILANBIO @STARTNET.CFG
REDIR LANTA @STARTNET.CFG
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\LANTA
@echo ===== End LANtastic configuration =====
*** Example NET.CFG file ***
-----------------------------------------------------
Please add the following into your NET.CFG file.
Link Driver ICARDP
Frame Ethernet_802.3
Frame Ethernet_802.2
Frame Ethernet_II
Frame Ethernet_SNAP
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.