Contents ======== LSI Logic PCI SCSI/FC MPI Driver This program creates a Windows 2000 driver diskette for the LSI Logic SCSI controllers. You will need a formatted 3 1/2 inch floppy diskette for the following procedure. 1) Download the file to a directory on your hard drive. The file downloaded is a self extracting executable. 2) Double click on the file to run the executable. 3) Click on the unzip button to extract files to the floppy. Installing on a New Windows 2000 Server --------------------------------------- 1) Boot the system using the Windows 2000 CD. As the message "Press F6 if you need to install a third party SCSI or RAID driver" appears, press F6 immediately. 2) Within a few minutes, a screen appears that asks for additional adapters in the system. Choose 'S'. 3) You are prompted for the driver diskette. Insert the LSI Logic Windows 2000 SCSI driver diskette created above and press Enter. 4) "Dell PERC 4/im | LSI Logic 1020/1030 Driver (Windows 2000)" appears in the middle of the screen. Press Enter to load the driver. 5) Press Enter again to continue installation process as usual. Adding the LSI Logic SCSI Driver to an Existing Windows 2000 Server ------------------------------------------------------------------- 1) Boot the system to Windows 2000. The Found New Hardware Wizard displays. 2) Select Search for a suitable driver and click Next to continue. 3) Select Floppy disk drive, insert the LSI Logic Windows 2000 SCSI driver diskette created above and click Next to continue. 4) Select "LSI Logic 1020/1030 Ultra320 SCSI Adapter" from the floppy drive and click on Next. 5) The Found New Hardware Wizard screen appears once for each SCSI channel present. Repeat steps 2 to 4 for each time the wizard pops up to complete the installation of the card. 6) To confirm driver installation, right click on My Computer and select Manage. Click on Device Manager, then click on SCSI and RAID controllers to see the newly added LSI Logic SCSI controller(s) in the list.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.