RPCINS_E.TXT Driver File Contents (BrotherFaxDriver98-ME.zip)

[RPC]
[Installer]
[English]
[MFC]
[Modified:03/05/96 1:58 PM]
[Comment :None]
[Copyright (c) Brother Industries,Ltd.]



<0> Setup Title
\[Remote Printer Console Ver%RPCVER% Setup\]

<1> Help Title and key
\[Help\]
\k[Esc] Quit
\k[Page up/down] Scroll

<2> Readme Title and key
\[README.DOC\]
\k[Esc] Quit
\k[Page up/down] Scroll

<3> Installing/Update the RPC files
\[Install the RPC files to %PATH%\]



<10> No RPC exist
Could not find RPC in %PATH%

Press \<Enter\> to change drive or directory
\k[Enter] Retry
\k[F3] Exit

<11> Exit to DOS
Exit to DOS without Setup?

Press \<Enter\> to exit
\k[Enter] Exit
\k[Esc] Cancel

<12> Not enough disk space
There isn't enough free disk space
Current space is %SPACE% Kbyte
%REQUIRE% Kbyte required.

Press \<Enter\> to change drive
\k[Enter] Retry
\k[F3] Exit

<13> Invalid path name
Invalid path name %PATH%

Press \<Enter\> to change drive
\k[Enter] Retry
\k[F3] Exit

<14> DOS Error
%DOSERR%

Press \<Enter\> to exit to DOS
\k[Enter] Exit to DOS

<15> Searching the RPC
Searching the RPC in %PATH%



<50> Help: Setup Autoexec.bat
Setup Autoexec.bat

If you require the RPC to be available whichever directory you are in,
you must add the search path of the RPC files to your Autoexec.bat file.
If you require the STM to automatically be enabled whenever your
computer is turned on, you should also add the line "STMX.COM" to your
Autoexec.bat file.
If you set the settings to "Valid", the installer automatically adds the
search path of the RPC files and "STMX.COM" to your AUTOEXEC.BAT file.



<100> Select language
* Select your Local Language by moving cursor up/down and press \<Enter\>.
* W„hlen Sie die gewnschte Sprache mit den Cursor-Tasten (hoch/tief),
 und drcken Sie \<Enter\>.
* S‚lectionnez une langue en d‚pla‡ant le curseur verticalement et
 appuyez sur la touche \<Entr‚e\>.
* Velg Spr†k ved † bruke piltastene opp/ned † trykke \<Enter\> tasten.
* Kies de gewenste taal met de pijltjestoetsen en druk op \<Enter\>.
* V„lj ”nskat spr†k genom att flytta mark”ren upp/ner och tryck \<Enter\>.


     \b[%LOCENG%=X] English
     \b[%LOCGER%] Deutsch
     \b[%LOCFRE%] Fran‡ais
     \b[%LOCNOR%] Norsk
     \b[%LOCDUT%] Nederlands
     \b[%LOCSPA%] Svenska

\k[Enter]

<101> Welcome to setup
\[Welcome to Setup\]

This is the setup utility for \[Brother Remote Printer Console(RPC)
Ver %RPCVER%\] for Laser Printer MFC series.

\[RPC\] is a DOS application which consists of the \[RPC main program\]
and a \[status monitor(STM)\] program. The RPC allows you to know the
printer status and set/change the printer settings from your computer
keyboard. The STM program, which continually monitors the printer
status, or the use of a Hot Key sequence enable the main program of the
RPC to wake up automatically.

Press \<Enter\> to continue
\k[Enter] Continue
\k[F3] Exit setup


<102> Select the operation
\[Select the operation as follow\]

Use the cursor up/down key to change.

     \b[%JOB1%=X] New Installation
     \b[%JOB2%] Update or add the another model of RPC
     \b[%JOB3%] Change configuration

If setting above is correct, press \<Enter\> for continue.

\[Note\]
If you already installed the RPC, update/add or change configuration are
available.

\k[Enter] Continue
\k[F3] Exit

<103> Enter the installation directory
\[Enter the installation directory\]

Enter the \[drive\] and \[directory name\] of your disk onto which you
require the RPC files to be installed.
You can change the default directory name as follows.

     \e[%PATH%=C:\RPCX]

Press \<Enter\> for continue
\k[Enter] Continue
\k[F3] Exit

<104> Confirm the installation directory
\[Confirm the installation directory\]

Copy RPC files \[%PATH%\]

There must be \[%REQUIRE%\] kbyte of disk space available.
If above directory is correct, press \<Enter\> to start installation.
\k[Enter] Continue
\k[Esc] Retry

<105> Enter the directory of RPC
\[Enter the drive or directory of RPC\]

Enter the \[drive\] or \[drive with directory name\] of RPC that is
already installed.
If you enter only the drive name, search for the RPC file in that drive.

     \e[%PATH%=C:\]

Press \<Enter\> for continue
\k[Enter] Continue
\k[F3] Exit

<106> Found the RPC
\[Found the RPC Ver%FINDVER% in %PATH%\]

Do you want to continue the operation for the RPC?

Press \<Enter\> for continue
\k[Enter] Continue
\k[Esc] Retry



<107> RPC files have been copied.
\[RPC files have been copied\]

Installation will now let you set the configuration of the RPC and your
computer according to your requirements.

Press \<Enter\> for continue
\k[Enter] Continue
\k[F3] Exit


<108> Confirm system configuration
\[Confirm your system configuration\]

Use the cursor up/down key to select and use the space key to change.

     Printer port   \s[%LPT%=LPT1]
     Monitor type   \s[%MONITOR%=Color/Monochrome]
     DOS boot drive \s[%BOOT%=C:]

If setting above is correct, press \<F10\> for continue.
\k[F10] Continue
\k[F3] Exit



<109<50>> Setup Autoexec.bat
\[Setup Autoexec.bat\]

You can modify the Autoexec.bat for RPC as follow
Use the cursor up/down key to select and use the space key to change.

     Search path of RPC  \s[%ADDPATH%=Valid/Invalid]
     Auto start of STM   \s[%ADDSTM%=Invalid/Valid]

If the settings above are correct, press \<F10\> to continue.

\k[F10] Continue
\k[F3] Exit
\k[F1] Help

<110> Autoexec.bat was modified
\[Autoexec.bat was modified\]

Old Autoexec.bat was saved as \[Autoexec.old.\]

The changes to Autoexec.bat which have just been made will only be
available when you restart your computer.

Press \<Enter\> for continue
\k[Enter] continue

<111> Installation and setup is complete
\[Installation and setup is complete.\]

After exiting to DOS and restarting your computer (CTRL, ALT, DELETE ),
you can start the RPC main program by entering the command shown below.
     \[RPCX\<Enter\>\]
If required, you can cause the STM program to remain in your computer
memory by entering the command shown below.
     \[STMX\<Enter\>\]

When STM is resident in your computer, the RPC main body automatically
wakes up when there is a change in the printer status, or it can be
awakened by using the Hot-key sequence \[%HOTKEY%\] even when another
application is running.

You can change the STM settings and Hot-key sequence in the Console
Config Menu in the RPC main program.

Press \<Enter\> to exit to DOS prompt.
\k[Enter] exit to DOS


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.57