; ; OEMSETUP.INF for Dell PERC2 RAID controllers. ; This INF installs the miniport and its coinstaller. ; ; Copyright (c) 1999 - 2001, Adaptec Inc. ; [Version] Signature = "$Windows NT$" Class = SCSIAdapter ClassGUID = {4d36e97b-e325-11ce-bfc1-08002be10318} Provider = %ADPT% CatalogFile = perc2.cat DriverVer=11/03/2002, 2.7.1.4944 [ControlFlags] ExcludeFromSelect = * [SourceDisksNames] 1 = %disk1%, raidisk1, [SourceDisksFiles] perc2.sys = 1,,20000 perc2evt.exe = 1,,23000 perc2hib.sys = 1,,23000 perc2cin.dll = 1,,23000 [perc2DriverFiles] perc2.sys, perc2.sys, nperc2.sys, 0x00000000 [perc2EvtFiles] perc2evt.exe, perc2evt.exe, nperc2evt.exe, 0x00000000 [perc2HibFiles] perc2hib.sys, perc2hib.sys, nperc2hib.sys, 0x00000000 [perc2CoInstFiles] perc2cin.dll, perc2cin.dll, nperc2cin.dll, 0x00000000 [DestinationDirs] perc2EvtFiles = 11 perc2CoInstFiles = 11 DefaultDestDir = 12 ; =================== Table of content ========================= [Manufacturer] %ADPT% = ADPT [ADPT] ; ; AdvancedRAID devices ; %perc2.DeviceDesc% = perc2_Inst, PCI\VEN_1011&DEV_0046&SUBSYS_13649005 ; ; RAIDpoint devices ; %perc2si.DeviceDesc% = perc2_Inst, PCI\VEN_1028&DEV_0001&SUBSYS_00011028 ; ; RAIDpoint devices using Gatling technology ; %perc3di.DeviceDesc% = perc2gat_Inst, PCI\VEN_1028&DEV_0002&SUBSYS_00021028 %perc3si.DeviceDesc% = perc2gat_Inst, PCI\VEN_1028&DEV_0003&SUBSYS_00031028 %perc3di.DeviceDesc% = perc2gat_Inst, PCI\VEN_1028&DEV_0002&SUBSYS_00D11028 %perc3di.DeviceDesc% = perc2gat_Inst, PCI\VEN_1028&DEV_0002&SUBSYS_00D91028 %perc3di.DeviceDesc% = perc2gat_Inst, PCI\VEN_1028&DEV_000A&SUBSYS_01061028 %perc3di.DeviceDesc% = perc2gat_Inst, PCI\VEN_1028&DEV_000A&SUBSYS_011B1028 %perc3di.DeviceDesc% = perc2gat_Inst, PCI\VEN_1028&DEV_000A&SUBSYS_01211028 ; ; RAIDpoint (SCSI chip in RAID mode) ; %perc2gatscsi.DeviceDesc% = perc2gatscsi_Inst, PCI\VEN_9005&DEV_00C5&SUBSYS_00C51028 ; ; Install section for the miniport that requires no filters ; [perc2_Inst.NT] CopyFiles = perc2DriverFiles, perc2EvtFiles CopyINF = perc2mgt.inf DelFiles = OldDeviceDriverFiles DelReg = OldDeviceDriverReg [perc2_Inst.NT.HW] DelReg = LegacyScsiportValues, RemoveUpperFilters [perc2_Inst.NT.Services] AddService = perc2, %SPSVCINST_ASSOCSERVICE%, perc2_Service_Inst, Miniport_EventLog_Inst ;AddService = perc2evt, , perc2evt_Service_Inst, perc2evt_EventLog_Inst DelService = perc2evt DelService = afacomm DelService = afadisk DelService = afaport DelService = afasa DelService = afascsi DelService = afasup [perc2_Inst.NT.CoInstallers] CopyFiles = perc2CoInstFiles AddReg = perc2_CoInstallers_AddReg ; ; Install section for the miniport that requires the lower level ; hibernate fix filter (i.e., Gatling technology hardware) ; [perc2gat_Inst.NT] CopyFiles = perc2DriverFiles, perc2EvtFiles, perc2HibFiles CopyINF = perc2mgt.inf DelFiles = OldDeviceDriverFiles DelReg = OldDeviceDriverReg [perc2gat_Inst.NT.HW] AddReg = perc2gat_AddReg DelReg = LegacyScsiportValues, RemoveUpperFilters [perc2gat_Inst.NT.Services] AddService = perc2, %SPSVCINST_ASSOCSERVICE%, perc2_Service_Inst_gat, Miniport_EventLog_Inst ;AddService = perc2evt, , perc2evt_Service_Inst, perc2evt_EventLog_Inst AddService = perc2hib, , perc2hib_Service_Inst DelService = perc2evt DelService = afacomm DelService = afadisk DelService = afaport DelService = afasa DelService = afascsi DelService = afasup [perc2gat_Inst.NT.CoInstallers] CopyFiles = perc2CoInstFiles AddReg = perc2_CoInstallers_AddReg ; ; Install section for the Gatling technology SCSI chip when assigned to RAID mode; ; this uses both the miniport driver and the hibernate fix filter ; [perc2gatscsi_Inst.NT] CopyFiles = perc2DriverFiles, perc2HibFiles CopyINF = perc2mgt.inf DelFiles = OldDeviceDriverFiles DelReg = OldDeviceDriverReg [perc2gatscsi_Inst.NT.HW] AddReg = perc2gatscsi_AddReg DelReg = LegacyScsiportValues, RemoveUpperFilters [perc2gatscsi_Inst.NT.Services] AddService = perc2, %SPSVCINST_ASSOCSERVICE%, perc2_Service_Inst_gat, Miniport_EventLog_Inst ;AddService = perc2evt, , perc2evt_Service_Inst, perc2evt_EventLog_Inst AddService = perc2hib, , perc2hib_Service_Inst DelService = perc2evt [perc2gatscsi_Inst.NT.CoInstallers] CopyFiles = perc2CoInstFiles AddReg = perc2_CoInstallers_AddReg ; ; Service install sections ; [perc2_Service_Inst] DisplayName = %perc2_ServiceName% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\perc2.sys LoadOrderGroup = SCSI miniport AddReg = perc2_Parameters_Inst ; ; PERC2 service that sets the "HibFiltPresent" driver parameter; identical with ; above except for the addition of a second AddReg section ; [perc2_Service_Inst_gat] DisplayName = %perc2_ServiceName% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\perc2.sys LoadOrderGroup = SCSI miniport AddReg = perc2_Parameters_Inst, perc2gat_Parameters_Inst [perc2evt_Service_Inst] DisplayName = %perc2evt_ServiceName% Description = %perc2evt_ServiceDesc% ServiceType = %SERVICE_WIN32_OWN_PROCESS% StartType = %SERVICE_AUTO_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %11%\perc2evt.exe -d perc2 Dependencies = WinMgmt,RasMan,Eventlog [perc2hib_Service_Inst] DisplayName = %perc2hib_ServiceName% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_IGNORE% ServiceBinary = %12%\perc2hib.sys LoadOrderGroup = SCSI miniport [perc2gat_AddReg] HKR,,"LowerFilters", %FLG_ADDREG_TYPE_MULTI_SZ%, "perc2hib" [perc2gatscsi_AddReg] HKR,,"LowerFilters", %FLG_ADDREG_TYPE_MULTI_SZ%, "perc2hib" ; ; Coinstaller registry additions (same one for all drivers) ; [perc2_CoInstallers_AddReg] HKR,,CoInstallers32, %FLG_ADDREG_TYPE_MULTI_SZ%, "perc2cin.dll, XxxCoInstaller" ; ; Event log registry additions ; [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg, Driver_Info_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile, %FLG_ADDREG_TYPE_EXPAND_SZ%, "%11%\IoLogMsg.dll;%11%\perc2evt.exe" HKR,,TypesSupported, %FLG_ADDREG_TYPE_REG_DWORD%, 7 [perc2evt_EventLog_Inst] AddReg = perc2evt_EventLog_AddReg [perc2evt_EventLog_AddReg] HKR,,EventMessageFile, %FLG_ADDREG_TYPE_EXPAND_SZ%, "%11%\perc2evt.exe" HKR,,TypesSupported, %FLG_ADDREG_TYPE_REG_DWORD%, 7 ; ; Hardware-specific registry additions (under Parameters subkey) ; [perc2_Parameters_Inst] HKR,"Parameters\PnpInterface", "5", %FLG_ADDREG_TYPE_REG_DWORD%, 1 HKR,"Parameters\Device", "NumberOfRequests", %FLG_ADDREG_TYPE_REG_DWORD%, 254 [perc2gat_Parameters_Inst] HKR,"Parameters\Device", "DriverParameters", %FLG_ADDREG_TYPE_SZ%, "HibFiltPresent=1" [LegacyScsiportValues] HKR,Scsiport,BusNumber HKR,Scsiport,LegacyInterfaceType HKR,Scsiport,SlotNumber [RemoveUpperFilters] HKR,,UpperFilters ;**************************************************** ; The following are drivers to remove and registry entries to delete ; when upgrading the device drivers. ;**************************************************** [OldDeviceDriverFiles] afacomm.sys afadisk.sys afaport.sys afasa.sys afascsi.sys afasup.sys [OldDeviceDriverReg] HKLM,HARDWARE\RESOURCEMAP\AFA,afacomm HKLM,HARDWARE\RESOURCEMAP\AFA\afacomm HKLM,HARDWARE\RESOURCEMAP\AFA,afadisk HKLM,HARDWARE\RESOURCEMAP\AFA\afadisk HKLM,HARDWARE\RESOURCEMAP\AFA,afaport HKLM,HARDWARE\RESOURCEMAP\AFA\afaport HKLM,HARDWARE\RESOURCEMAP\AFA,afasa HKLM,HARDWARE\RESOURCEMAP\AFA\afasa HKLM,HARDWARE\RESOURCEMAP\AFA,afascsi HKLM,HARDWARE\RESOURCEMAP\AFA\afascsi HKLM,HARDWARE\RESOURCEMAP\AFA,afasup HKLM,HARDWARE\RESOURCEMAP\AFA\afasup ; ; Following are registry keys to add in support of Dell. ; [Driver_Info_AddReg] HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%,Description,,%DriverDescription% HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%,CurrentVer,,%DriverOEMVersion% HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%,Ver_%DriverOEMVersion%,,%DriverVersionID% HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%,BaseDriverFileName,,%BaseDriverFileName% HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%,BaseDriverFileVersion,,%BaseDriverFileVersion% [Strings] ADPT = "Adaptec" disk1 = "Dell PERC 2, 2/Si, 3/Si, 3/Di Windows 2000 Device Drivers" perc2.DeviceDesc = "Dell PERC 2 RAID Controller" perc2si.DeviceDesc = "Dell PERC 2/Si RAID Controller" perc3di.DeviceDesc = "Dell PERC 3/Di RAID Controller" perc3si.DeviceDesc = "Dell PERC 3/Si RAID Controller" perc2gatscsi.DeviceDesc = "Dell PERC 3 RAID (SCSI chip)" perc2_ServiceName = "Dell PERC 2 Miniport Driver" perc2evt_ServiceName = "Dell PERC 2 Event Logging Service" perc2evt_ServiceDesc = "Provides enhanced event logging capability for the PERC 2 Miniport Driver" perc2hib_ServiceName = "Dell PERC 2 Hibernate Driver" ; Driver Information Entries ; These items will be set by IHV... DriverMfgr = "Adaptec" ; IHV name DriverVersionID = "2.7-1" ; The IHV driver version ; These items will be set by OEM DriverOEM="Dell" ; name of the OEM DriverFamily="Storage" ; device family (NIC, Storage, Video...) DriverProduct="Adaptec RAID Controller" ; Specific Name of device (chipset, for example) DriverDescription="Windows 2000" ; Description of device (product name, OS or system supported) DriverOEMVersion="A01" ; OEM-specified version BaseDriverFileName="PERC2.SYS" ; BaseDriverFileVersion="2.7.1.4944" ; fill in with actual version for Perc2.sys ;******************************************* ;Handy macro substitutions (non-localizable) COPYFLG_FORCE_FILE_IN_USE = 0x00000008 SPSVCINST_ASSOCSERVICE = 0x00000002 SPSVCINST_NOCLOBBER_DISPLAYNAME = 0x00000008 SERVICE_KERNEL_DRIVER = 1 SERVICE_WIN32_OWN_PROCESS = 0x10 SERVICE_BOOT_START = 0 SERVICE_SYSTEM_START = 1 SERVICE_AUTO_START = 2 SERVICE_DEMAND_START = 3 SERVICE_NO_START = 4 SERVICE_ERROR_IGNORE = 0 SERVICE_ERROR_NORMAL = 1 FLG_ADDREG_TYPE_SZ = 0x00000000 FLG_ADDREG_TYPE_EXPAND_SZ = 0x00020000 FLG_ADDREG_TYPE_MULTI_SZ = 0x00010000 FLG_ADDREG_TYPE_REG_DWORD = 0x00010001Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.