Upgrading to Windows 2000
for the
V2.8 DELL PERC 2 and PERC 2, PERC 2/Si, PERC 3/Si, PERC 3/Di Controllers
ReadMe
This document provides instructions to upgrade Windows 2000 for the
V2.8 DELL PERC 2 and intigrated (PERC 2, PERC 2/Si, PERC 3/Si, and
PERC 3/Di) controllers.
1.0 Installing the Driver When Upgrading to Windows 2000
To install the driver for the controller during an upgrade
to Windows 2000, follow these steps.
1. Before you perform the upgrade, uninstall the
Controller Management Software (FAST and the CLI).
See the installation guide associated with your
controller for instructions on how to uninstall the
Controller Management Software.
2. Insert the diskette that contains the Windows 2000
driver for your controller into the "A" drive and do
not remove it from the drive. The diskette contains
the following:
- A setup script, "w2ksetup.bat", that prepares
your system for the upgrade to Windows 2000.
- The Windows 2000 driver for your controller.
3. From the command prompt, change your working directory
to the "A" drive, and execute the following command:
A:\w2ksetup.bat
The "w2ksetup.bat" script prepares your system for the
upgrade to the new Windows 2000 driver for your
controller.
CAUTION: During the upgrade to Windows 2000, the
Windows NT device driver for your controller that are
currently installed on your system are replaced with
the Windows 2000 driver.
If, for whatever reason, you execute the script
"w2ksetup.bat" but do not complete the upgrade to
Windows 2000, you must re-install the Windows NT
driver for your controller since--among other
things-- "w2ksetup.bat" removes the Windows NT driver
for your controller from your system.
Thus, if you do not reinstall the Windows NT driver
for your controller, you will not be able to manage
the controller.
To reinstall the Windows NT driver for your
controller, go to "Control Panel-> SCSI Adapters".
Select the "driver" tab, then select the entry for
your controller and press "Add". Select "Have Disk",
then when prompted, insert the diskette that contains
the PERC Windows NT driver for your controller.
After you install the original NT driver for your
controller, reboot the system and you will be able to
manage your controller.
4. Insert the Windows 2000 CD-ROM into your CD drive.
5. When the upgrade dialog box appears, select the option
to "Upgrade to Windows 2000".
Follow the on-screen instructions to begin the upgrade
to Windows 2000.
A popup window now appears, asking if you want to
continue installing an unsigned driver. Select "Yes".
The upgrade then continues to completion.
6. After you perform the upgrade, install the Controller
Management Software (FAST and the CLI). See the
installation guide associated with your controller for
instructions on how to install the Controller
Management Software.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.