1. dmf560TXD_winxp_driver_1010.zip Driver
2. PATHWORK.TXT File Contents

PATHWORK.TXT Driver File Contents (dmf560TXD_winxp_driver_1010.zip)

D-Link DMF-560TXD DirectPort PC Card

                       DECnet PathWork v4.x Installation

  Contents
  ÄÄÄÄÄÄÄÄ
        Introduction
        Getting Started
        Support Options
        Copyrights, Trademarks, and Disclaimers

  Introduction
  ÄÄÄÄÄÄÄÄÄÄÄÄ
        This installation assumes that the PCMCIA drivers are working
        properly. Getting Started will describe the installation for
        Pathworks 4.x.

  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

        DECnet PathWork provides a NETSET.EXE program for installing NDIS
        drivers. For information on the usage of this program, please refer
        to the DECnet installation manual.

        Install DECnet PathWork selecting 3Com's Etherlink II card.

        Modify your CONFIG.SYS file to include the following lines:

             device = c:\decnet\ELNKII.SYS
                             to
             device = c:\decnet\LMNDIS.DOS

        Modify the following lines in your PROTOCOL.INI file:

             [ELNKMACII]
             drivername = ELNKII$
             ioaddress = 0x320
             interrupt = 11
             xmitbufs = 2

             [IPX4MAC]
                :
             bindings = ELNKMACII
                :

             [DATALINK]
                :
             bindings = ELNKMACII
                :

             to:

             [LMNDIS_NIF]
             drivername = LMNDIS$

             [IPX4MAC]
                :
             bindings = LMNDIS_NIF
                :

             [DATALINK]
                :
             bindings = LMNDIS_NIF
                :

  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        We are consistently improving and upgrading our drivers. you are
        welcomed at any time to browse through our BBS, and download any
        drivers, utilities and help files.

        If you still cannot get the LanModem working properly, our
        technical experts are always ready to help.  Please be at your
        computer, have your LanModem, Drivers Disk, and the following
        information available:

        * Version number of CARDEN.EXE or any drivers you are
          running
        * The extact text of any error message displayed on your screen
        * The type of computer
        * The type of network

  Copyrights, Trademarks, and Disclaimers
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
  rights reserved by Microsoft Corporation

  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
  reserved by Novell Corporation

  Further rights reserved to their respective corporations



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.