. XIRCOM MODEM PROGRAM INSTRUCTIONS . AND MODEM SCRIPT FILES . Release 4.2 . August 14, 1998 ======================================================================= This SCRIPTS.TXT file contains instructions for setting up your Xircom Modem (or Ethernet+Modem) with several popular communications programs. This includes the following Xircom products: RBEM56,CBEM56. CONTENTS ======== 1) Introduction 2) America Online v. 3.0 3) America Online v. 3.0 with Windows 95 4) CompuServe - WinCIM 2.5.1 with Internet Explorer 2.1 5) CompuServe - WinCIM v.3.02 with Windows 95 6) Laplink v.6.0 7) Laplink v.6.0 with Windows 95 8) Lotus CC:Mail Mobile v.2.22 with Windows 9) Lotus CC:Mail Mobile v.2.22 with Windows 95 10) Lotus Notes v.4.11a with Windows 11) Lotus Notes v.4.11a with Windows 95, NT 4.0 12) Microsoft Dial-Up Adapter Networking for Windows 95 13) Prodigy Internet v.1.1.6 with Windows 95 14) Microsoft Mail 15) Procomm Plus 2.0 16) Procomm Plus with Windows 3.x 17) Xircom Technical Support 1) INTRODUCTION ============ Some of these instructions may include references to "modem script files" - These files are: - CLASS73.MDM - MODEM.INI - XEM56LOT.MDM - XEM56MSM.MDM - XEM56MSM.SCR - MODEMS.DAT - WMODEMS.DAT Most communications programs include a function to set up your modem within the program. Most communications programs are capable of Modem auto-detection: 1. Search for modem 2. Discovery of modem make, model, speed, communications port and interrupt 3. Incorporation of modem configuration into program The Xircom modem is automatically configured by the communications program, if the modem is installed prior to the communications program. If the communications program is already installed, you are installing a new modem and/or your modem is not functioning, please follow the instructions for each application. Note for Windows 95 Installations --------------------------------- 1. First, install the Xircom modem or ethernet+modem 2. Second verify the modem settings: a. Go to Control Panel b. Double click on the Modem icon c. Highlight the Xircom modem that will be used d. Click on Properties e. Note the Communications Port assigned to the Xircom adapter under GENERAL f. Accept the default or set the Maximum Speed of the modem g. Use the default initialization string. If it requires modification, click on the Connection Tab, then Advanced, input changes on the Extra Settings line 3. Verify that the modem is functioning via Modem Diagnostics and Hyperterminal 4. Install the communications program. The Xircom modem is automatically configured by the communications program, if the modem is installed prior to the communications program. During the installation process, you will be prompted to verify the Modem selection, communications port, etc. 2) AMERICA ONLINE v.3.0 ==================== America Online v.3.0 ships with a MODEM.INI file. This file must be modified in order to use Xircom modems. 1. To update the MODEM.INI file, do the following: a. In the C:\AOL30\MPM sub-directory b. Rename the CLASS73.MDM file to CLASS73.OLD and MODEM.INI file to MODEM.OLD c. Copy the new CLASS73.MDM and MODEM.INI files to the C:\AOL30\MPM sub-directory d. Start the America Online program 2. To setup your Xircom product, click SETUP on the Welcome screen, a. Click on Modem Setup in the Network & Modem Setup window b. In the Modem Selection and Customization window, i. Select the COM # that is assigned to the Xircom modem under Modem Port ii. Highlight the Xircom Modem, then click OK iii. Note: Use the default initialization string. If you need to change the string, you may do so under the Edit Commands options. 3) AMERICA ONLINE V. 3.0 WITH WINDOWS 95 ====================================== 1. To update the MODEM.INI file, do the following: a. In the C:\AOL30\MPM sub-directory b. Rename the CLASS73.MDM file to CLASS73.OLD and MODEM.INI file to MODEM.OLD c. Copy the new CLASS73.MDM and MODEM.INI files to the C:\AOL30\MPM sub-directory d. Start the America Online program 2. To setup your Xircom product, click SETUP on the Welcome screen, a. Click on Modem Setup in the Network & Modem Setup window b. In the Modem Selection and Customization window, i. Select the COM # that is assigned to the Xircom modem under Modem Port ii. Highlight the Xircom Modem, then click OK iii. Note: Use the default initialization string. If you need to change the string, you may do so under the Edit Commands options. 4) COMPUSERVE - WINCIM 2.5.1 WITH INTERNET EXPLORER 2.1 ==================================================== To setup the Xircom modem or revise the present configuration, 1. Click on Special 2. Click on Session Settings a. Indicate which COM port is assigned to the Xircom modem under Connector b. Select the speed of the Xircom modem under Baud Rate c. Click once in the box to the left of Use Winsock, for Internet access 3. Click on Modem in the Setup Session Settings window a. In the Modem Control Strings, select the appropriate Xircom adapter under Modem: b. Use the default initialization string. If modification is required, enter the necessary changes in the Initialize: section. c. Click OK, to update configuration and close menus. 5) COMPUSERVE - WINCIM V.3.02 WITH WINDOWS 95 =========================================== To setup the Xircom modem or revise the present configuration: 1. Click on Access or the Setup icon 2. Click on Preferences 3. In the Connection window under Connection Type check all settings for accuracy. a. Winsock: (Default WINSOCK) b. Connect using: c. Phone #: d. Port: e. Port speed: f. Dial type: If any of the above settings are not valid, modify them for program functionality 4. To modify the modem type, click on Define Modem, highlight the modem manufacturer and model of the Xircom modem you will utilize NOTE: The default initialization string should suffice. To modify your initialization string, click on Define Modem, enter the new initialization string in the Initialization section. 5. Click OK to save configuration and exit 6) LAPLINK V.6.0 ============= To setup the Xircom modem or revise the present configuration: 1. In the Control Panel, click on the Modem icon to access the Port Setup window 2. In the Port Setup Screen a. Click on the communications port that corresponds to the one assigned to the modem b. Select Modem under Type c. Enable Port by clicking box in that field 3. Click Configure to configure the modem a. Select your modem Speed under Modem Settings b. Under Modem Type, select Xircom for all Xircom Modems. c. To modify the modem initialization string, which is usually not necessary, click Customize and make any changes required. Click OK, then Close. d. Enter the phone number(s) of your service provider and/or BBS in the Connect over Modem window under Phone Number. Be sure entries in Services and Security are correct for your environment and/or the type of action you wish to exercise. If too many programs are loaded via the LOAD or RUN statements in your c:\windows\win.ini file, you will receive an "Out of System Memory Error" when running LapLink. Correct this error by temporarily editing out any special programs in those two statements. Make a backup copy of the WIN.INI file before editing it. The load=c:\(Laplink Directory)\llwload.exe line must reside in the WIN.INI, as it is required for LapLink to work. Operating inconsistencies will be experienced when Card and Socket Services are used with LapLink. If you need to use LapLink, it is recommended that Card and Socket Services are not used. 7) LAPLINK V.6.0 WITH WINDOWS 95 ============================== To setup the Xircom modem or revise the present configuration: The steps are the same as those listed above, except under 7.3.d. 1. In the Connect over Modem window under Dialing enter: a. The phone number(s) of your service provider and/or BBS Phone Number b. The location that you are dialing from under Dialing Location c. Notice that in Connect Over Modem, Connect Using, the actual name of the Xircom product being used should be reflected. d. Verify that the entry in Services section matches the action you wish to exercise e. There is no Security category 8) LOTUS CC:MAIL MOBILE V.2.22 WITH WINDOWS ======================================== 1. Copy the XEM56LOT.MDM file to the default directory where the Lotus cc:Mobile *.MDM files are located. 2. Setup Lotus cc:Mobile to use this XEM56LOT.MDM file as follows: a. From the Lotus cc:Mail Mobile Main Menu, select Mobile b. Next, select Location Setup c. In Telephone, verify that your Dialing Rules and Strings are correct d. In Communications, highlight Default Communications Method, then set the * Connection Type = Modem * Modem Type = (select the correct modem) * Serial Port = Communication Port assigned to the modem 3. Click OK to save and close 4. Enable SESSION.LOG to obtain the status of the modem: a. From the Lotus cc:Mail Mobile Main Menu, select Mobile, Mobile Setup: b. Place a 'check mark' under Save cc:Mail Background Session Log c. Place a 'check mark' under Activate Diagnostics in cc:Mail Background 9) LOTUS CC:MAIL MOBILE V.2.22 WITH WINDOWS '95 ============================================ 1. Copy the XEM56LOT.MDM file to the default directory where the Lotus cc:Mobile *.MDM files are stored. 2. Setup Lotus cc:Mobile to use this XEM56LOT.MDM file as follows: a. From the Lotus cc:Mail Mobile Main Menu, select Mobile, b. Next select Location Setup c. In Telephone, verify that the Dialing Rules and Strings are correct d. In Communications, highlight Default Communications Method, then Edit as follows: * Connection Type = Modem * Modem Type = Xircom Ethernet + Modem 56 * Serial Port = Com Port setting used in Windows 95 3. Click OK to save and close 4. Enable SESSION.LOG to obtain the modem status of: a. From the Lotus cc:Mail Mobile Main Menu, select Mobile, Mobile Setup: b. Place a 'check mark' under Save cc:Mail Background Session Log c. Place a 'check mark' under Activate Diagnostics in cc:Mail Background 10) LOTUS NOTES V.4.11A WITH WINDOWS ================================ To setup the Xircom modem or revise the present configuration: 1. Copy the XEM56LOT.MDM file to the default directory where Lotus Notes program is installed. \NOTES\DATA\MODEMS 2. In the Lotus Notes Desktop screen, click on File 3. Click on Tools 4. Click on User Preferences 5. Click on the Ports icon 6. Under Communications Ports a. Select the appropriate protocol if connecting via the network b. If connecting over the modem i. Select the correct COM# ii. Click in the Port Enabled box 7. If connecting over modem, click on COM# Options, a. Under Modem type, verify that the correct Xircom adapter is listed b. Verify that the Maximum port speed is set to 115.2 Kbps c. Use the default initialization string. d. Click OK to save changes and exit 11) LOTUS NOTES V.4.11A WITH WINDOWS 95, NT 4.0 ============================================ To setup the Xircom modem or revise the present configuration: 1. Copy the XEM56LOT.MDM file to the default directory where Lotus Notes program is installed. \NOTES\DATA\MODEMS 2. In the Lotus Notes Desktop screen, click on File 3. Click on Tools 4. Click on User Preferences 5. Click on the Ports icon 6. Under Communications Ports a. Select the appropriate protocol if connecting via the network b. If connecting over the modem i. Select the correct COM# ii. Click in the Port Enabled box 7. If connecting over modem, click on COM# Options, a. Under Modem type, verify that the correct Xircom adapter is listed b. Verify that the Maximum port speed is set to 115.2 Kbps c. Use the default initialization string. If you need to modify the string, do so under Control Panel\Modems\Modem Properties\Connection\Advanced\Extra Settings d. Click OK to save changes and exit 12) MICROSOFT DIAL-UP ADAPTER NETWORKING FOR WINDOWS 95 =================================================== The Microsoft Dial-Up Adapter may be used for Remote Access Service (RAS), remote connection to in-house server and/or to access the Internet. To install the Dial-Up Adapter, 1. In the Control Panel, double click on the Network icon 2. Click Add 3. Double click on Adapter 4. Highlight Microsoft under Manufacturers and Dial-Up Adapter will appear under Network Adapters, click OK 5. Windows 95 disks may be requested if not present in C:\Windows\Options\Cabs sub-directory 6. Add the proper networking protocol for the Dial-Up Adapter (i.e. TCP/IP, (IP, Subnet Mask, and Gateway may be required)) 7. Restart the computer when prompted 8. Revise the Dial-Up Adapter properties a. Double click on the My Computer icon on the desktop b. Double click on the Dial-Up Networking icon c. Double click on the Make New Connection icon i. Type in the Name of the computer or service you want to dial ii. Under Select a Modem, select the Xircom modem that is installed iii. Click on Configure, confirm the Com Port and Maximum Speed of connection iv. Use the default Initialization String. To modify the string click on the Connection tab, and then Advanced Connection Settings. Enter all changes under Extra Settings: v. Click OK to return to the Make New Connection screen, then click Next vi. Enter the Area Code and Telephone number of computer or service, click Next, then Finish 13) PRODIGY INTERNET V.1.1.6 WITH WINDOWS 95 ========================================= To setup the Xircom modem or revise the present configuration: 1. Double click on NetAssist for Prodigy Internet 2. Click on Dialer Settings 3. Click on Modem Info. Highlight the Xircom modem being used 4. By default, there should be an 'X' in the 'Check this if you have a PCMCIA modem' 5. Click Change Modem Strings 6. Modify the Init String: line to read AT&FE0V0, then click OK 7. Click OK to exit the Modem Settings menu 8. Click Exit to accept changes and close the NetAssist Windows Application - NetAssist 9. Double click the Prodigy Internet icon to access the service 14) Microsoft Mail ============== 1. Copy the XEM56MSM.SCR to the MS Mail Data Disk used by the administrator to set up clients. This will allow the Xircom Modem to appear as a choice during setup or the XEM56MSM.SCR file can be copied to the C:\WINDOWS\MSMAIL\MSRMT\GLB directory, once copied, there will now be an option for the Xircom Ethernet + Modem 56. If it is necessary to modify the initialization settings, edit the XEM56MSM.MDM file. This will need to compiled with the MS-MAIL Compiler utility (SCRCOMP.EXE). Copy the newly compiled XEM56MSM.SCR file to C:\WINDOWS\MSMAIL\MSRMT\GLB and choose yes when prompted to overwrite the existing XEM56MSM.SCR file. 15) Procomm Plus 2.0 ================ 1.Copy the MODEMS.DAT file to the directory containing PCPLUS.EXE. Run the install program again and now choose the Xircom Ethernet + Modem 56 from the modem list. 16) Procomm Plus with Windows 3.x ============================= 1.Copy the WMODEMS.DAT file to the directory containing PW.EXE Run the install program again and now choose the Xircom Ethernet + Modem 56 from the modem list. 17) XIRCOM TECHNICAL SUPPORT ======================== To obtain technical support for your Xircom product, please call or send a facsimile to the appropriate number listed below. XIRCOM CORPORATE North and South America ======================== ------------------------------------------ Xircom, Inc. Sales Support ............. (800) 438-4526 Corporate Headquarters Sales Support ............. (805) 376-9300 2300 Corporate Center Dr. Technical Support ......... (805) 376-9200 Thousand Oaks, CA 91320 KnowledgeLine ............. (805) 375-7202 . 24-Hr Documents-by-Fax .... (800) 775-0400 . 24-Hr Documents-by-Fax .... (805) 376-9020 . 24-Hr Fax - Corporate ..... (805) 376-9311 Shipping Address: 24-Hr Fax - Sales Support.. (805) 376-9220 2101 Corporate Center Dr. 24-Hr Fax - Tech Support .. (805) 376-9100 Thousand Oaks, CA 91320 24-Hr Data Lines - BBS .... (805) 376-9130 . 24-Hr Internet E-mail ...... cs@xircom.com . 24-Hr World Wide Web http://www.xircom.com . 24-Hr CompuServe .......... CIS: GO XIRCOM . HOURS (Sales): 8:00a.m. to 5:00p.m., Mon-Fri . HOURS (Tech): 5:00a.m. to 6:00p.m., Mon-Fri XIRCOM EUROPE Europe, Middle East, and Africa ======================== ------------------------------------------ Xircom Europe N.V. Sales Support ......... +32/(0)3 450.08.11 King Square Technical Support ..... +32/(0)3 450.08.60 De Villermontstraat 16 24-Hr Documents-by-Fax. +32/(0)3 450.08.00 2550 Kontich, Belgium 24-Hr Fax ............. +32/(0)3 450.09.90 . 24-Hr Data Lines - BBS. +32/(0)3 457.64.10 . 24-Hr Internet E-mail . eurots@xircom.com . 24-Hr World Wide Web http://www.xircom.com . 24-Hr CompuServe ............ GO XIRCOM . HOURS (Sales): 9:00 to 17:00, Mon-Thu; to 16:00, Fri . HOURS (Tech): 9:00 to 18:00, Mon-Fri XIRCOM ASIA PACIFIC Asia Pacific ======================== ------------------------------------------ Xircom Asia Pacific (Pte) Ltd Sales & Technical Support+65 323 1511 76 Shenton Way 24-Hr Fax ...............+65 224 3313 Unit #06-01 24-Hr Data Lines - BBS.. +65 323 0455 Singapore 079119 24-Hr World Wide Web http://www.xircom.com . 24-Hr CompuServe ........... GO XIRCOM . HOURS: 9:00a.m. to 5:30p.m., Mon-Fri ===============================[ END ]===============================Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.