Asset Tag Tool Release Notes Copyright (c) 2004 Intel Corporation All Rights Reserved May 21, 2004 The Asset Tag Tool provides the ability to read and display the FRU fields Asset Tag, Service Tag, and PPID. It also provides the capability to update the Asset Tag field. This tool is executed from a command prompt in the EFI Shell environment. RELEASE NOTES FOR ASSET TAG TOOL VERSION 1.0 BUILD 6 A. CHANGES SINCE PREVIOUS VERSION 1. Streamlined system FRU read and write operations. The utility now reads and updates only Product and Common header FRU areas. B. DEPENDENCIES 1. Requires the system FRU to be set up with the Goblin FRU configuration. 1. Executes under the EFI Shell Ver 0.99 or greater. 2. A system reset is required after updating the FRU fields. C. SUPPORTED PLATFORMS 1. Dell PowerEdge 7250 D. HOW TO USE THIS UTILITY 1. Boot to the EFI shell. 2. Copy the following files to HD or removable media: a. asset.efi b. ipmi.efi c. frudata.efi d. frudata.str 3. Command line Interface Usage: asset [-h] [-i] [-f] [-d] [-a <value>] Command line switches defined below: -h : (or -?) Displays the command line help. -i : Displays the asset tag, service tag, and PPID FRU fields of the system. -a : Sets the asset tag to the specified value. -d : Used in conjunction with -a to delete the asset tag. -f : Disables prompting the user for confirmation during an operation. Usage Examples: asset -a NEW_ASSET : Set asset tag asset -a NEW_ASSET -f : Set asset tag with no prompting asset -a -d : Delete the asset tag asset -a -d -f : Delete the asset tag with no prompting 3.1 Full description of command line switches If this tool is executed without any command line options, this tool displays the FRU field information from the system, similar to the -i option described below. a. -i This option displays the following information read from the system: Asset Tag Service Tag PPID b. -a <value> This option is used to set the Asset Tag and it must be followed by the asset tag value. The <value> parameter is an ASCII value up to 10 characters long. If less than 10 characters are entered, this tool pads the FRU field with trailing spaces (0x20). If more than 10 characters are entered, this tool displays an error message and exits with an exit error code. Before setting this value, this tool prompts the user whether or not to continue with the operation, unless the -f option is used. Examples: 1. Set asset tag to "NEW_ASSET" asset -a NEW_ASSET 2. Set asset tag to "NEW_ASSET" with no prompting. asset -a NEW_ASSET -f c. -d This option is used in conjunction with -a option to delete the asset tag by filling out the field with spaces (0x20). Before deleting the field, this tool prompts the user whether or not to continue with the operation, unless the -f option is used. Examples: 1. Delete the asset tag. asset -a -d 2. Delete the asset tag with no prompting. asset -a -d -f d. -f This option is used in conjunction with -a and -d to disable prompting the user whether or not to continue with the operation. E. LIST OF FILES REQUIRED TO RUN THIS TOOL 1. asset.efi 2. frudata.efi 3. frudata.str 4. ipmi.efi F. KNOWN ISSUES None * Third-party brands and names are the property of their respective owners. (end)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.