USB DUAL SHOCK CONTROLLER USER MANUAL
Introduction:
Thank you for choosing our product. This controller is for use with USB interface in PC.
There are two joysticks and dual-vibration function. You can switch between Analog and
Digital mode. It also contains a Turbo fire system which help you to play more easily.
System requirement:
1 Pentium 100 or higher
2 Microsoft Windows 98/ME/2000/XP
3 32MB RAM Memory
4 USB Interface
5 1.44MB Floppy Disk Driver
Preparation before use:
1 Require Microsoft DirectX version 7.0 or above
Check DirectX version:
[Start] -> [Run] -> Type: "dxdiag.exe". Look over DirectX item. If the version
is lower, get the latest version from "http://www.microsoft.com/directx/".
2 Controller Driver Installation
Insert Driver Disk. Run "Setup.exe". Follow the instruction to finish installation.
3 Plug the Controller into the USB port.
4 Enter [Control Panel] -> [Game Controller] -> [Properties]. Then you can test all
buttons and vibration function.
Game Pad User Guide:
1 Turbo: Set Auto-Fire function for buttons (1-8):
1) Press and hold the fire button you want to set with Auto-Fire function.
2) Press the Turbo button simultaneously.
That button has been set with Auto-Fire function.
Clear: Clear Auto-Fire function for the buttons
1) Press and hold the fire button you want to clear the Auto-Fire function.
2) Press the Clear button simultaneously.
That button has been cleared from Auto-Fire function.
2 Analog/Digital Mode Alternation:
Digital mode: RED-LED is OFF. All buttons work except for the two Joysticks
Analog mode : RED-LED is ON. All buttons work including the two Joysticks.
Important notes:
1 Not all game softwares support vibration function. Please check with your game software
before using.
2 Vibration function will occur only after installing the driver. Always plug the controller
into the USB port after installing the driver.
3 Do not twist the mini sticks.
4 If your game doesn't support vibration function, you can still use the joypad to play but
there won't be any vibration.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.