Contents: ========= Dell PowerEdge RAID Controller 3/QC, 3/DC, 3/DCL, 3/SC, 2/DC, 2/SC Device Driver for NT 4.0 Version - 4.11 Compatibility: ============== This Device Driver is compatible with version Firmware 1.57 or later for the PERC 3/QC, PERC 3/DC AND PERC 3/DCL, firmware version 1.63 or later for the PERC 3/SC, firmware version 1.06 or later for the PERC 2/DC and firmware version 3.13 or later for PERC 2/SC. This package contains a self-extracting package of the Windows NT 4.0 device driver installation diskette for PERC 3/QC, 3/DC, 3/DCL, 3/SC, 2/SC and 2/DC . P3411A04.EXE Self-extracting package to create Windows NT 4.0 device driver installation diskette To build the installation diskette, extract this package into a temporary directory, then execute the package, directing it's output to an empty formatted diskette. Release History =============== Version 4.11 Changes in respect to previous release (4.07) While read and write commands merging, sometime this merged command are exceeding the number of Physical Page that is supported by Firmware. In this situation driver split these commands to fit the number of Pages. Added PERC 3/DCL and PERC 3/SC string in inf file. In the FindAdapter routine,ConfigInfo structure was not properly initialized for the NT4.0. In addition a timer routine has been implemented in the SendMailBox() structure for the NT4.0. In NT 4.0 drivers we cannot expose a non-disk device at the same ID across the channels. At present we are using one bus to represent the non-disk device. So if we have the non-disk devices at the same ID we cannot expose it. This driver architecture has beem modified to make it a generic driver. With this driver the mentioned limitation has been taken care.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.