YAMAHA* AUDIO HARDWARE DEVICE DRIVERS FOR USE WITH WINDOWS* NT 1.0 REVISION HISTORY 2.0 INTRODUCTION 3.0 INSTALLATION INSTRUCTIONS FOR WINDOWS NT 3.51 3.1 Yamaha OPL3SA2 and OPL3SA3 Sound Systems 4.0 INSTALLATION INSTRUCTIONS FOR WINDOWS NT 4.0 4.1 Yamaha OPL3SA2 and OPL3SA3 Sound Systems 5.0 COPYRIGHT/TRADEMARKS -------------------- 1.0 REVISION HISTORY -------------------- July 24, 1996: Version 1.0 January 25, 1997: Version 3.03 ---------------- 2.0 INTRODUCTION ---------------- This file contains last-minute updates. Please read this file before proceeding with the installation. This diskette contains the Yamaha* Windows* NT audio device driver. Supported OS: Windows NT Version 3.51 and Version 4.0 ------------------------------------------------- 3.0 INSTALLATION INSTRUCTIONS FOR WINDOWS NT 3.51 ------------------------------------------------- This installation assumes that you have correctly installed Windows NT on your computer and that your system is able to boot and run without errors. If not, refer to the Windows NT User Manual for help before continuing. -------------------------------------------- 3.1 Yamaha OPL3SA2 and OPL3SA3 Sound Systems -------------------------------------------- 1. From the Windows NT Program Manager, select the Main icon and then double click on Control Panel. 2. Select the Drivers icon, click on the Add button, select "Unlisted or Updated Driver", and click on OK. 3. When the Install Driver window appears, insert your Yamaha Driver diskette, and type the drive letter of the diskette drive followed the directory NT, then click OK. 4. When the Add Unlisted or Updated Driver window appears, select the OPL3-SA Sound System, and click on OK. 5. If you are reinstalling the drivers, you will see a Driver Exists screen that asks you if you would like to use the current driver or install a new driver. Click on the New button to continue. 6. At this point you will see a Yamaha OPL3-SA Series Driver window. If you want to change the settings for the sound card, (they are listed under the Wave section of the hardware setup), select the drop down menu next to I/O Address or IRQ and select your new resources. 7. Place a checkmark in the ENABLE MPU401 checkbox. If you wish to change the resources for this device, select the new setting from the drop down menus labeled I/O Address, and IRQ. 8. Place a checkmark in the Use Dual DMA checkbox. If you wish to change the DMA channels, select the radial button next to the resource you want to use, (choices are DMA 0, 1, and 3). 9. When you are finished, click on OK. You will now see a System Setting Change window, select Restart Now to finish the installation and reboot the system. Note: After the reboot you should hear the Windows sound after you log in. If you do not, check resource conflicts using the Windows NT Diagnostics utility located in the Administrative Tools folder. ------------------------------------------------ 4.0 INSTALLATION INSTRUCTIONS FOR WINDOWS NT 4.0 ------------------------------------------------ Note this installation assumes that you have correctly installed Windows NT on your computer and that your system is able to boot and run without errors. If not, refer to the Windows NT User Manual for help before continuing. -------------------------------------------- 4.1 Yamaha OPL3SA2 and OPL3SA3 Sound Systems -------------------------------------------- 1. From the Windows NT desktop, click on the START button, choose Settings, and then Control Panel. 2. Double Click on the Multimedia icon, and select the Devices tab. 3. Click on the Add button, select "Unlisted or Updated Driver", and click on OK. 4. When the Install Driver window appears, insert your Yamaha Driver diskette, and type the drive letter of the diskette drive followed by the directory NT, then click OK. 5. When the Add Unlisted or Updated Driver window appears, select the OPL3-SA Sound System, and click on OK. 6. If you are reinstalling the drivers, you will see a Driver Exists screen that asks you if you would like to use the current driver or install a new driver. Click on the New button to continue. 7. At this point you will see a Yamaha OPL3-SA Series Driver window. If you want to change the settings for the sound card, (they are listed under the Wave section of the hardware setup), select the drop down menu next to I/O Address or IRQ and select your new resources. 8. Place a checkmark in the ENABLE MPU401 checkbox. If you wish to change the resources for this device, select the new setting from the drop down menus labeled I/O Address, and IRQ. 9. Place a checkmark in the Use Dual DMA checkbox. If you wish to change the DMA channel, select the radial button next to the resource you want to use, (choices are DMA 0, 1, and 3). 10.When you are finished, click on OK. You will now see a System Setting Change window, select Restart Now to finish the installation and reboot the system. Note: After the reboot you should hear the NT logon sound after you log in. If you do not, check for resource conflicts using the Windows NT Diagnostics utility, located in the Administrative Tools folder. ------------------------- 5.0 COPYRIGHT/TRADEMARKS ------------------------- *Other brands and trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.