Contents: Dell PowerEdge RAID Controller 2 (PERC 2) NetWare Managagement Utility Version 2.1-3 (build 2940) This package contains a self-extracting package holding the PERC 2 NetWare Management Utilities (Command Line Interface and agents) for Novell NetWare 4.11, 4.2, and 5.0. NWAPPD1.EXE Self-extracting file with NetWare utilities. The above file should be extracted to a local directory on the NetWare server (do not extract into the \NWSERVER directory). It can be copied directly to diskette for transport to the system or extracted to a network location. Note: Version 2.1 management utilities require that any local controllers are running version 2.1 firmware and that OS drivers are also at version 2.1. Version 2.1 management utilities can only access and manage earlier version 1.1 controllers remotely.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.