************************************************************
************************************************************
*
* Intel(R) 810 Chipset Driver for Windows* 95 and
* Windows* 98
* Installation Readme
*
* NOTE: This document refers to systems containing the
* following Intel chipset:
*
* Intel(R) 810 Chipset
*
* Date: January 21, 2000
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information may be disclosed to
* others. Please read the Disclaimer section at the bottom
* of this document, and contact your Intel field
* representative if you would like more information.
*
************************************************************
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. System Requirements
2. Localized Language Abbreviations
3. Installing the Software
4. Verifying Installation of the Software
5. Identifying the Software Version Number
6. Uninstalling the Software
************************************************************
* 1. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain one of the following Intel
chipsets:
Intel(R) 810 Chipset GMCH A-2
2. The kit software should be installed on
systems with at least 32 MB of system memory.
3. There should be sufficient hard disk space in the
<TEMP> directory (typically C:\WINDOWS\TEMP) on the system,
in order to install this software.
The Windows* 95 INF files included with this distribution
package are designed to function with the following
versions of Windows* 95:
Microsoft Windows* 95 4.00.950B (OSR2.1 with USB Supplement)
Microsoft Windows* 95 4.00.950C (OSR2.5 with or without USB
Supplement)
The Microsoft Windows* 98 INF files included with this
distribution package are designed to function with the
following version of Microsoft Windows* 98:
Microsoft Windows 98* 4.10.1998
Please check with your system provider to determine the
operating system and Intel chipset used in your system.
************************************************************
* 2. LOCALIZED LANGUAGE ABBREVIATIONS
************************************************************
The following list contains the abbreviations of all languages
into which the driver has been localized. You may have to
refer to this section while using this document.
ptb -> Brazilian Portuguese
dan -> Danish
nld -> Dutch
enu -> English
fin -> Finnish
fra -> French
frc -> French Canadian
deu -> German
ita -> Italian
eng -> International English
jpn -> Japanese
kor -> Korean
chs -> Mainland Chinese
plk -> Polish
ptg -> Portuguese
cht -> Traditional Chinese
nor -> Norwegian
rus -> Russian
esp -> Spanish
sve -> Swedish
tha -> Thai
************************************************************
* 3. INSTALLING AND EXECUTING THE SOFTWARE
************************************************************
General Installation Notes:
1. The operating system must be installed on the system prior
to installation.
2. This installation procedure is specific only to the
version of driver and installation file included in this
release.
3. You can choose six different methods of installation for
this release. The files that must be downloaded for each
are indicated in the appropriate section.
1) InstallShield* (automated) install from hard drive
See Section 3.1.
2) InstallShield* (automated) install from CD-ROM
See Section 3.1.
3) InstallShield* (automated) install from floppy disk
See Section 3.2.
4) Manual install from hard drive
See Section 3.3.
5) Manual install from CD-ROM
see Section 3.3.
6) Manual install from floppy disk
See Section 3.4.
3.1 INSTALLSHIELD (AUTOMATED) INSTALL FROM CD-ROM or HARD DRIVE
1. Download WIN9XCD.ZIP from the Web. Double-click to unzip.
(You must have WinZip* installed; download it from www.winzip.com).
Hit the Extract button and indicate the directory into which
the files are to be extracted. Hit the Extract button to unzip
the files to that directory.
2. At this point you have three options for install. If you
wish to do a manual install, refer to Section 3.3 or 3.4
below.
If you wish to install from CD, copy the entire contents,
including subdirectories, of the directory where you unzipped
the WIN9XCD.ZIP file. Insert the CD-ROM into the drive. If
you have Autorun enabled, the installer will begin automatically.
Otherwise enter the graphics directory on the CD-ROM and double-
click SETUP.EXE.
If you wish to install from the hard drive, enter the directory
where you unzipped the WIN9XCD.ZIP file. Enter the graphics
subdirectory and double-click SETUP.EXE.
3. Click "Next" at the Welcome screen.
4. Read the license agreement and click "Yes" to continue.
5. This screen indicates the directory in which the End-User
Diagnostic Utility files will be stored.
NOTE: The graphics driver is not installed here, only the
EUD utility files are. (It is installed in the appropriate
Windows system directories). If you wish to change the
directory in which the EUD will be stored, click "Browse"
and change the directory. Click "Next" to continue.
6. The driver files will now be installed. When finished
installing, choose the "Yes" to reboot option, and click
"Finish" to restart your computer. The driver should now
be loaded. To determine if the driver has been loaded
correctly, refer to the Verifying Installation section
below.
3.2 INSTALLSHIELD (AUTOMATED) INSTALL FROM FLOPPY DISK
1. Floppy disk install is broken down by language, so you need
to download the correct file from the Web for the driver
language needed. File names are in the format WIN9Xxxx,
where xxx is the three-letter abbreviation of the desired
language. (See Section 2, Localized Language Abbreviations).
2. After downloading the correct file from the Web,
double-click to unzip them. (WinZip must already be installed;
download it from www.winzip.com). Hit the Extract button
and indicate the directory into which the files are to be
extracted. Hit the "Extract" button to unzip the files
to that directory.
3. The files will unzip into multiple subdirectories, each
labeled for its own disk. Copy the contents of these
directories to their corresponding floppy disks.
4. Insert floppy 1 into the disk drive. Go to the floppy
directory and double-click on setup.exe.
5. Click "Next" on the introduction screen.
6. Read the license agreement and click "Yes" to continue.
7. This screen indicates the directory into which the End-User
Diagnostic files will be stored. If you wish to change this
directory, click "Browse" and change the directory. Click
"Next" to continue.
8. The driver files will be copied from the floppy. Insert
the remaining floppies as directed and click "OK".
9. When finished, click "Yes" to restart your computer. The
driver should now be loaded. To determine if the driver has
been loaded correctly, refer to the Verifying Installation
section below.
3.3 MANUAL INSTALL FROM CD-ROM OR HARD DRIVE
1. Download WIN9XCD.ZIP from the Web. Double-click to unzip.
(You must have WinZip installed; download it from www.winzip.com).
Hit the Extract button and indicate the directory into which
the files are to be extracted. Hit the Extract button to unzip
the files to that directory. Transfer the files to a CD if
you wish to install from the CD-ROM.
2. Select the My Computer icon, the Control Panel icon, and
then the Display icon.
3. You should now be in the Display Properties window.
Select the Settings tab, and click on the Advanced
Properties button.
4. In the Advanced Display Properties window, select the
Adapter tab, and click the Change... button.
5. The Update Device Driver Wizard window appears.
Click on the Next button to continue.
6. A new window appears, prompting either for Windows to
search for a device driver or for manual selection. Click
the following option: "Display a list of all the drivers in
a specific location, so you can select the driver you want."
After this, click on the Next button.
7. From the new window, click on the Have Disk button and
then the Browse button.
8. Enter the directory where you unzipped WIN9XCD.ZIP and
then enter the Graphics subdirectory. Next enter the
Win9X subdirectory. If you wish to install the English
version of the driver, simply click "OK". (The
I81xw9x.inf file should be highlighted.) If you wish to
install a localized driver file, next enter the Inf
subdirectory (from the Graphics subdirectory), and then
enter the directory for the language you wish to install.
(See Section 2, Localized Language Abbreviations.)
At this point, the i81xw9x.inf file should be highlighted.
Click "OK".
9. Click "OK". The Select Device screen should open and it
may have two options to choose from. (Some systems may have
only one.) Select "Intel 82810-DC100 Graphics Controller Hub"
if you have a system with display cache, and select "Intel
82810 Graphics Controller Hub" if you have a system with no
display cache. Click "OK".
10. Click "Next". The driver should install. Click "Finish"
when done.
11. Close all open windows and click "Yes" to reboot. The
driver should now be loaded. To determine if the driver has
been loaded correctly, refer to the Verifying Installation
section below.
3.4 MANUAL INSTALL FROM FLOPPY DISK
1. The floppy disk install is broken down by language, so you
need to download the correct file from the Web for the driver
language needed. File names are of the format WIN9Xxxx, where
xxx is the three-letter abbreviation of the desired language.
(See Section 2, Localized Language Abbreviations.)
2. Once you have downloaded the correct file from the Web,
double-click to unzip it. (You must have WinZip installed;
download it from www.winzip.com). Hit the Extract button
and indicate the directory into which the files are to be
extracted. Hit the Extract button to unzip the files to
that directory.
3. The files will unzip into multiple subdirectories labeled
accordingly. Copy the contents of these directories
to their corresponding floppy disks.
4. Select the My Computer icon, the Control Panel icon, and
then the Display icon.
5. You should now be in the Display Properties window.
Select the Settings tab, and click on the Advanced
Properties button.
6. In the Advanced Display Properties window, select the
Adapter tab, and click the Change... button.
7. The Update Device Driver Wizard window appears.
Click on the Next button to continue.
8. A new window appears, prompting either for Windows to
search for a device driver or for manual selection. Click
the following option: "Display a list of all the drivers
in a specific location, so you can select the driver you
want." After this, click on the Next button.
9. From the new window, click on the Have Disk button and
then the Browse button.
10. Click "OK". The Select Device screen should open and
may have two options to choose from. (Some systems may have
only one). Select "Intel 82810-DC100 Graphics Controller Hub"
if you have a system with display cache, and select "Intel
82810 Graphics Controller Hub" if you have a system with no
display cache. Click "OK".
11. Click "Next". Follow any prompts for additional floppy
disks to be inserted. The driver should then install. Click
"Finish" when done.
12. Close all open windows and click "Yes" to reboot. The
driver should now be loaded. To determine if the driver has
been loaded correctly, refer to the Verifying Installation
section below.
************************************************************
* 4. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
1. From the Windows 95 or Windows 98 desktop, click on
"My Computer", "Control Panel", and then "System".
2. You should be in the System Properties window. Click
on the Device Manager tab. From here, go down to "Display
Adapter" and click. The driver associated with the display
adapter should read as follows: "Intel 82810-DC100 Graphics
Controller Hub" or "Intel 82810 Graphics Controller Hub".
If not, the driver must be reinstalled. To check
the version of the driver, refer to the section below.
************************************************************
* 5. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
1. Select the My Computer icon, the Control Panel icon, and
then the Display icon.
2. You should now be in the Display Properties window.
Select the Settings tab and click the Advanced button.
3. Select the Version tab. The entry for the Display
Driver Version should be the appropriate version number.
If not, then a different driver is being used.
************************************************************
* 6. UNINSTALLING THE SOFTWARE
************************************************************
NOTE: This procedure assumes that the above installation process
was successful. This uninstallation procedure is specific
only to the version of the driver and installation file
included in this package.
1. From the Windows 95 or Windows 98 desktop, click on
"My Computer", "Control Panel", and then "Display".
2. You should be in the Display Properties window. Click
on the Settings tab. Next click the Advanced button.
3. Select the Adapter tab. The driver information will
appear. Click on the Change button.
4. The Update Device Driver Wizard window should open.
Click "Next".
5. In the next window, select the "Display a list" option
and click the Next button. Next click on "Show all
hardware".
6. In the split screen window under "Manufacturers:", select
"(Standard display types)". In the other half of the split
window, select "Standard PCI Graphics Adapter (VGA)", then
click on the Next button.
7. On the next screen, hit "Next". If needed, direct
Windows to the location of your Windows 95 or Windows 98
installation CD-ROM. The VGA driver should be loaded.
Click on "Finish" and reboot the system as directed,
in order for the changes to take effect.
8. To verify that the VGA driver was installed correctly,
refer to Section 4 and look for "Standard PCI Graphics
Adapter (VGA)," instead of "Intel 82810 Graphics Controller
Hub".
************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
* (OEM/IHV Distribution & Single User)
************************************************************
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.
Please Also Note:
* If you are an Original Equipment Manufacturer (OEM) or
Independent Hardware Vendor (IHV), this complete LICENSE
AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL
SOFTWARE LICENSE AGREEMENT, applies.
---------------------------------------------------------
For OEMs and IHVs:
LICENSE. Subject to the terms of this Agreement, Intel
grants to You a nonexclusive, nontransferable, worldwide,
fully paid-up license under Intel's copyrights to:
a) use and copy Software internally for Your own
development and maintenance purposes; and
b) copy and distribute Software, including derivative
works of the Software, to Your end-users, but only
under a license agreement with terms at least as
restrictive as those contained in Intel's Final,
Single-User License Agreement, attached as Exhibit A;
and
c) modify, copy and distribute the end-user documentation
that may accompany the Software, but only in
association with the Software.
If You are not the final manufacturer or vendor of a
computer system or software program incorporating the
Software, then You may transfer a copy of the Software,
including derivative works of the Software (and related
end-user documentation), to Your recipient for use in
accordance with the terms of this Agreement, provided such
recipient agrees to be fully bound by the terms hereof. You
shall not otherwise assign, sublicense, lease or in any
other way transfer or disclose Software to any third party.
You shall not reverse-compile, disassemble or otherwise
reverse-engineer the Software.
Except as expressly stated in this Agreement, no license or
right is granted to You directly or by implication,
inducement, estoppel or otherwise. Intel shall have the
right to inspect or have an independent auditor inspect
Your relevant records to verify Your compliance with the
terms and conditions of this Agreement.
CONFIDENTIALITY. If You wish to have a third-party
consultant or subcontractor ("Contractor") perform work on
Your behalf that involves access to or use of Software,
You shall obtain a written confidentiality agreement from
the Contractor that contains terms and obligations with
respect to access to or use of Software no less restrictive
than those set forth in this Agreement and excluding any
distribution rights, and use for any other purpose.
Otherwise, You shall not disclose the terms or existence of
this Agreement or use Intel's name in any publications,
advertisements or other announcements without Intel's
prior written consent. You do not have any rights to use
any Intel trademarks or logos.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and by international
treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software,
or to items referenced therein, at any time without notice,
but is not obligated to support or update the Software.
Except as otherwise expressly provided, Intel grants no
express or implied right under Intel patents, copyrights,
trademarks or other intellectual property rights. You may
transfer the Software only if the recipient agrees to be
fully bound by these terms and if you retain no copies of
the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items
contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) RESULTING FROM THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
---------------------------------------------------------
EXHIBIT "A"
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.
LICENSE. You may copy the Software onto a single computer
for your personal, non-commercial use, and you may make one
back-up copy of the Software, subject to these conditions:
1. You may not copy, modify, rent, sell, distribute or
transfer any part of the Software except as provided in
this Agreement, and you agree to prevent unauthorized
copying of the Software.
2. You may not reverse-engineer, decompile or disassemble
the Software.
3. You may not sublicense or permit simultaneous use of the
Software by more than one user.
4. The Software may contain the software or other property
of third-party suppliers, some of which may be identified
in, and licensed in accordance with, any enclosed
"license.txt" file or other text or file.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and international treaty
provisions. You may not remove any copyright notices from
the Software. Intel may make changes to the Software, or to
items referenced therein, at any time without notice, but
is not obligated to support or update the Software. Except
as otherwise expressly provided, Intel grants no express or
implied right under Intel patents, copyrights, trademarks
or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by
these terms and if you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) RESULTING FROM THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
SLAOEMIHV/RBK/November 4, 1998
************************************************************
************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or warranty.
The INTEL SOFTWARE LICENSE AGREEMENT contained herein
completely defines the license and use of this software.
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life-sustaining applications.
************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright (c) Intel Corporation, 1998-1999
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.