; MSPORTS.INF ; Copyright (c) 1994-1995 Microsoft Corporation [version] LayoutFile=layout.inf signature="$CHICAGO$" Class=Ports Provider=%MS% [DestinationDirs] DefaultDestDir = 11 ;LDID_SYS ; Install class "Ports" ;---------------------------------------------------------- [ClassInstall] AddReg=PortsClass.AddReg [PortsClass.AddReg] HKR,,,,%PortsClassName% [ControlFlags] ExcludeFromSelect=MF\EISA_HWP1C10_DEV0,MF\EISA_HWP1C10_DEV1 ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_A-0484 ; Socket PCMCIA Serial Adapter ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_B-12F8 ; Socket PCMCIA Serial Adapter ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-PAGECARD_REVISION_A-FA29 ; Socket PCMCIA PageCard V3.0 ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_GPS_PCMCIA_GLOBAL_POSITIONING_SYSTEM_REVISION_B-AF8A ; Socket PCMCIA GPS Adapter ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_C-66D0 ; Socket PCMCIA GPS Adapter ExcludeFromSelect=PCMCIA\DATA_BROADCASTING_CORP-SIGNALCARD_RECEIVER-4E9B ; DBC SignalCard ExcludeFromSelect=PCMCIA\ROCKWELL-NAVCARD-64B7 ; Rockwell NavCard ExcludeFromSelect=PCMCIA\TRIMBLE_&_SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_B-6947 ExcludeFromSelect=PCMCIA\SMART_SERIAL_PORT-A0F6 ExcludeFromSelect=*IBM0002,*IBM0034 ; Drivers ;---------------------------------------------------------- [Manufacturer] %Std%=Std %HP%=HP %IBM%=IBM %Socket%=Socket %DBC%=DBC %Rockwell%=Rockwell %Trimble%=Trimble %Smart%=Smart [Std] %*PNP0400.DeviceDesc% = LptPort, *PNP0400 ; Printer Port %*PNP0401.DeviceDesc% = EcpPort, *PNP0401 ; ECP Printer Port %*PNP0500.DeviceDesc% = ComPort, *PNP0500 ; Communications Port %*PNP0501.DeviceDesc% = ComPort, *PNP0501 ; Communications Port ; Compaq devices %*CPQA0E0.DeviceDesc% = EcpPort, *CPQA0E0 ; ECP Printer Port %*CPQA0D9.DeviceDesc% = ComPort, *CPQA0D9 ; Communications Port [HP] ; Hewlett Packard devices %MF\EISA_HWP1C10_DEV0.DeviceDesc% = ComPort, MF\EISA_HWP1C10_DEV0 %MF\EISA_HWP1C10_DEV1.DeviceDesc% = LptPort, MF\EISA_HWP1C10_DEV1 %HWPDEAD.DeviceDesc% = ComPort, HWPDEAD [IBM] %*IBM0002.DeviceDesc%=ComPort,*IBM0002 %*IBM0034.DeviceDesc%=ComPort,*IBM0034 [Socket] %Socket-0484.DeviceDesc% = ComPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_A-0484" %Socket-12F8.DeviceDesc% = ComPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_B-12F8" %Socket-FA29.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-PAGECARD_REVISION_A-FA29" %Socket-AF8A.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_GPS_PCMCIA_GLOBAL_POSITIONING_SYSTEM_REVISION_B-AF8A" %Socket-66D0.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_C-66D0" [DBC] %DBC-4E9B.DeviceDesc% = NonPort, "PCMCIA\DATA_BROADCASTING_CORP-SIGNALCARD_RECEIVER-4E9B" [Rockwell] %Rockwell-64B7.DeviceDesc% = NonPort, "PCMCIA\ROCKWELL-NAVCARD-64B7" [Trimble] %Trimble-6947.DeviceDesc% = NonPort, "PCMCIA\TRIMBLE_&_SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_B-6947" [Smart] %Smart-A0F6.DeviceDesc% = ComPort, "PCMCIA\SMART_SERIAL_PORT-A0F6" ; LPT sections ;---------------------------------------------------------- [LptPort] CopyFiles=LptPort.Copy AddReg=LptPort.AddReg LogConfig=lsnn,lsan,lann,laan [EcpPort] CopyFiles=LptPort.Copy AddReg=EcpPort.AddReg LogConfig=lsnn,lsan,lsaa,lann,laaa [LptPort.Copy] lpt.vxd [LptPort.AddReg] HKR,,DevLoader,,*vcomm HKR,,Enumerator,,lptenum.vxd HKR,,Contention,,*vpd HKR,,PortDriver,,lpt.vxd HKR,,PortSubClass,1,00 HKR,,ECPDevice,1,00 [ECPPort.AddReg] HKR,,DevLoader,,*vcomm HKR,,Enumerator,,lptenum.vxd HKR,,Contention,,*vpd HKR,,PortDriver,,lpt.vxd HKR,,PortSubClass,1,00 HKR,,ECPDevice,1,01 ; The following sections are LPT and ECP port logical ; resource configurations. Section name format means: ; Char 1 = l (LPT port) ; Char 2 = I/O config: s (std), a (any) ; Char 3 = IRQ config: #, a (any), n (none) ; Char 4 = DMA config: a (any), n (none) [lsnn] ConfigPriority=HARDRECONFIG IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::) [lsan] ConfigPriority=HARDRECONFIG IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::) IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15 [lann] ConfigPriority=HARDRECONFIG IOConfig=8@100-3ff%fff8(3ff::) [laan] ConfigPriority=HARDRECONFIG IOConfig=8@100-3ff%fff8(3ff::) IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15 [lsaa] ConfigPriority=HARDRECONFIG IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::) IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15 DMAConfig=1,2,3,5,6,7 [laaa] ConfigPriority=HARDRECONFIG IOConfig=8@100-3ff%fff8(3ff::) IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15 DMAConfig=1,2,3,5,6,7 ; End LPT and ECP LogConfig sections [*pnp0400.det] AddReg=Ports.AddReg [Ports.AddReg] HKR,,NoSetupUI,,1 [*pnp0401.det] AddReg=Ports.AddReg [LptPort.PosDup] *PNP0401 [EcpPort.PosDup] *PNP0400 ; COM sections ;---------------------------------------------------------- [ComPort] CopyFiles=ComPort.Copy AddReg=ComPort.AddReg LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa [ComPort.Copy] serial.vxd serialui.dll [ComPort.AddReg] HKR,,DevLoader,,*vcomm HKR,,Enumerator,,serenum.vxd HKR,,PortDriver,,serial.vxd HKR,,Contention,,*vcd HKR,,ConfigDialog,,serialui.dll HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 HKR,,PortSubClass,1,01 HKR,,EnumPropPages,,"serialui.dll,EnumPropPages" [*pnp0500.det] AddReg=Ports.AddReg,DevMap.AddReg ; The following sections are COM port resource configs. ; Section name format means: ; Char 1 = c (COM port) ; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any) ; Char 3 = IRQ config: #, a (any) [c14] ; COM1,IRQ4 ConfigPriority=HARDRECONFIG IOConfig=3f8-3ff(3ff::) IRQConfig=S:4 [c1a] ; COM1, any IRQ ConfigPriority=HARDRECONFIG IOConfig=3f8-3ff(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c23] ; COM2, IRQ3 ConfigPriority=HARDRECONFIG IOConfig=2f8-2ff(3ff::) IRQConfig=S:3 [c2a] ; COM2, any IRQ ConfigPriority=HARDRECONFIG IOConfig=2f8-2ff(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c34] ; COM3, IRQ4 ConfigPriority=HARDRECONFIG IOConfig=3e8-3ef(3ff::) IRQConfig=S:4 [c3a] ; COM3, any IRQ ConfigPriority=HARDRECONFIG IOConfig=3e8-3ef(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c43] ; COM4, IRQ3 ConfigPriority=HARDRECONFIG IOConfig=2e8-2ef(3ff::) IRQConfig=S:3,5 [c4a] ; COM4, any IRQ ConfigPriority=HARDRECONFIG IOConfig=2e8-2ef(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [caa] ; Any base, any IRQ ConfigPriority=HARDRECONFIG IOConfig=8@100-ffff%fff8(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 ; End COM port LogConfig sections [ComPort.PosDup] *PNP0500,*PNP0501 [DevMap.AddReg] HKLM,hardware\devicemap\serialcomm,COM1,,COM1 HKLM,hardware\devicemap\serialcomm,COM2,,COM2 ; "NoDrv" section: We do not yet support these port devices. ;---------------------------------------------------------- [NoDrv] ; "Non-port" sections: PCMCIA cards that look like COM ; ports, but aren't (excluding modems). ;---------------------------------------------------------- [NonPort] CopyFiles=NonPort.Copy AddReg=NonPort.AddReg [NonPort.Copy] serial.vxd [NonPort.AddReg] HKR,,PortSubClass,1,01 HKR,,DevLoader,,*vcomm HKR,,PortDriver,,serial.vxd HKR,,Contention,,*vcd HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 ; User readable strings ;---------------------------------------------------------- [Strings] MS = "Microsoft" Std = "(Standard port types)" PortsClassName = "Ports (COM & LPT)" *PNP0400.DeviceDesc = "Printer Port" *PNP0401.DeviceDesc = "ECP Printer Port" *PNP0500.DeviceDesc = "Communications Port" *PNP0501.DeviceDesc = "Communications Port" ; Compaq devices *CPQA0E0.DeviceDesc = "ECP Printer Port" *CPQA0D9.DeviceDesc = "Communications Port" HP = "Hewlett Packard" MF\EISA_HWP1C10_DEV0.DeviceDesc="HP Communications Port" MF\EISA_HWP1C10_DEV1.DeviceDesc="HP Printer Port" HWPDEAD.DeviceDesc="HP Infrared Communication Port" IBM="IBM" *IBM0002.DeviceDesc="IBM Thinkpad Infrared Port" *IBM0034.DeviceDesc="IBM Thinkpad Infrared Port" Socket="Socket Communications" Socket-0484.DeviceDesc="Socket PCMCIA Serial Adapter" Socket-12F8.DeviceDesc="Socket PCMCIA Serial Adapter" Socket-FA29.DeviceDesc="Socket PCMCIA PageCard V3.0" Socket-AF8A.DeviceDesc="Socket PCMCIA GPS Adapter (Rev. B)" Socket-66D0.DeviceDesc="Socket PCMCIA GPS Adapter (Rev. C)" DBC="DBC" DBC-4E9B.DeviceDesc="DBC SignalCard" Rockwell="Rockwell" Rockwell-64B7.DeviceDesc="Rockwell NavCard" Trimble="Trimble" Trimble-6947.DeviceDesc="Trimble PCMCIA GPS Adapter (Rev. B)" Smart="SMART Modular Technologies" Smart-A0F6.DeviceDesc="SMART Serial Port" [Det.DevINFs] *pnp8215=netxir.inf ;Xircom PE3 *pnpa01e=scsi.inf ;Trantor T338 *pnpa01f=scsi.inf ;Trantor T348 *pnpa02f=scsi.inf ;Trantor T358Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.